From: Goetz Goerisch Date: Fri, 7 Jun 2024 12:42:32 +0000 (+0200) Subject: treewide: rename ZyXEL to Zyxel X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3774f3272ee976b922306a881b6eb603e79f81ed;p=openwrt%2Fstaging%2Fwigyori.git treewide: rename ZyXEL to Zyxel The company Zyxel rebranded some years ago. Currently the casing is according to the old branding even for newer devices which already use the new branding. This commit aligns the casing of Zyxel everywhere. Signed-off-by: Goetz Goerisch Link: https://github.com/openwrt/openwrt/pull/15652 Signed-off-by: Hauke Mehrtens --- diff --git a/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch b/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch index 16a1f08c84..1da50467ef 100644 --- a/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch +++ b/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch @@ -1,9 +1,9 @@ -arm: kirkwood: add ZyXEL NSA310 device +arm: kirkwood: add Zyxel NSA310 device -This patch add ZyXEL NSA310 1-Bay Media Server +This patch add Zyxel NSA310 1-Bay Media Server -The ZyXEL NSA310 device is a Kirkwood based NAS: +The Zyxel NSA310 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz @@ -512,7 +512,7 @@ NOTE: this patch is ready for upstream, LEDE-specific parts are in +CONFIG_KIRKWOOD=y +CONFIG_SYS_TEXT_BASE=0x600000 +CONFIG_TARGET_NSA310=y -+CONFIG_IDENT_STRING="\nZyXEL NSA310 1-Bay Power Media Server" ++CONFIG_IDENT_STRING="\nZyxel NSA310 1-Bay Power Media Server" +CONFIG_NR_DRAM_BANKS=2 +CONFIG_BOOTDELAY=3 +CONFIG_SYS_PROMPT="NSA310> " diff --git a/package/boot/uboot-kirkwood/patches/008-nsa325-uboot-generic.patch b/package/boot/uboot-kirkwood/patches/008-nsa325-uboot-generic.patch index db9a7a6fb2..71a4a65197 100644 --- a/package/boot/uboot-kirkwood/patches/008-nsa325-uboot-generic.patch +++ b/package/boot/uboot-kirkwood/patches/008-nsa325-uboot-generic.patch @@ -297,7 +297,7 @@ + /* reset the phy */ + miiphy_reset(name, devadr); + -+ /* The ZyXEL NSA325 uses the 88E1310S Alaska (interface identical to 88E1318) */ ++ /* The Zyxel NSA325 uses the 88E1310S Alaska (interface identical to 88E1318) */ + /* and has an MCU attached to the LED[2] via tristate interrupt */ + reg = 0; + @@ -496,7 +496,7 @@ +CONFIG_KIRKWOOD=y +CONFIG_SYS_TEXT_BASE=0x600000 +CONFIG_TARGET_NSA325=y -+CONFIG_IDENT_STRING="\nZyXEL NSA325 2-Bay Power Media Server" ++CONFIG_IDENT_STRING="\nZyxel NSA325 2-Bay Power Media Server" +CONFIG_NR_DRAM_BANKS=2 +CONFIG_BOOTDELAY=3 +CONFIG_SYS_PROMPT="NSA325> " diff --git a/package/boot/uboot-lantiq/Makefile b/package/boot/uboot-lantiq/Makefile index 927fbcb9c0..b569232b3d 100644 --- a/package/boot/uboot-lantiq/Makefile +++ b/package/boot/uboot-lantiq/Makefile @@ -280,14 +280,14 @@ define U-Boot/fb3370_sfspl endef define U-Boot/p2812hnufx_ram - NAME:=ZyXEL P-2812HNU-Fx (RAM) + NAME:=Zyxel P-2812HNU-Fx (RAM) BUILD_SUBTARGET:=xrx200 BUILD_DEVICES:=zyxel_p-2812hnu-f1 DDR_SETTINGS:=board/zyxel/p2812hnufx/ddr_settings.h endef define U-Boot/p2812hnufx_nandspl - NAME:=ZyXEL P-2812HNU-Fx (NAND SPL) + NAME:=Zyxel P-2812HNU-Fx (NAND SPL) BUILD_SUBTARGET:=xrx200 BUILD_DEVICES:=zyxel_p-2812hnu-f1 UBOOT_IMAGE:=u-boot.ltq.lzo.nandspl diff --git a/package/boot/uboot-lantiq/patches/0107-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch b/package/boot/uboot-lantiq/patches/0107-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch index 3f77d98476..91d9099f12 100644 --- a/package/boot/uboot-lantiq/patches/0107-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch +++ b/package/boot/uboot-lantiq/patches/0107-MIPS-add-board-support-for-ZyXEL-P-2812HNU-Fx.patch @@ -1,7 +1,7 @@ From 3f7be04a148d23cdb5fd320e0e2923983f8bd1f4 Mon Sep 17 00:00:00 2001 From: Luka Perkov Date: Tue, 6 Aug 2013 22:51:00 +0200 -Subject: MIPS: add board support for ZyXEL P-2812HNU-Fx +Subject: MIPS: add board support for Zyxel P-2812HNU-Fx Signed-off-by: Luka Perkov @@ -51,7 +51,7 @@ Signed-off-by: Luka Perkov +/* + * Copyright (C) 2013 Luka Perkov + * -+ * The values have been extracted from original ZyXEL U-Boot. ++ * The values have been extracted from original Zyxel U-Boot. + * + * SPDX-License-Identifier: GPL-2.0+ + */ @@ -243,7 +243,7 @@ Signed-off-by: Luka Perkov + +#define CONFIG_MACH_TYPE "P-2812HNU-Fx" +#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE -+#define CONFIG_BOARD_NAME "ZyXEL P-2812HNU-Fx" ++#define CONFIG_BOARD_NAME "Zyxel P-2812HNU-Fx" + +/* Configure SoC */ +#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */ diff --git a/package/kernel/mt7621-qtn-rgmii/Makefile b/package/kernel/mt7621-qtn-rgmii/Makefile index f5587f5363..35470e1443 100644 --- a/package/kernel/mt7621-qtn-rgmii/Makefile +++ b/package/kernel/mt7621-qtn-rgmii/Makefile @@ -29,7 +29,7 @@ endef define KernelPackage/mt7621-qtn-rgmii/description Enable RGMII connected Quantenna module on MT7621. - The Mitrastar designed ZyXEL WAP6805 has a Quantenna QV840 + The Mitrastar designed Zyxel WAP6805 has a Quantenna QV840 module connected to the RGMII pins of the MT7621 SoC. For unknown reasons, it is necessary to change the value of the register at 0x1e110008 from default (usually 0xc000c) diff --git a/package/utils/zyxel-bootconfig/Makefile b/package/utils/zyxel-bootconfig/Makefile index eb2dd79b82..4e1a74aeaa 100644 --- a/package/utils/zyxel-bootconfig/Makefile +++ b/package/utils/zyxel-bootconfig/Makefile @@ -15,12 +15,12 @@ include $(INCLUDE_DIR)/package.mk define Package/zyxel-bootconfig SECTION:=utils CATEGORY:=Base system - TITLE:=Utility for handling ZyXEL Bootconfig settings + TITLE:=Utility for handling Zyxel Bootconfig settings MAINTAINER:=David Bauer endef define Package/zyxel-bootconfig/description - This package contains an utility that allows handling ZyXEL Bootconfig settings. + This package contains an utility that allows handling Zyxel Bootconfig settings. endef define Build/Compile diff --git a/target/linux/ath79/dts/qca9557_zyxel_nbg6616.dts b/target/linux/ath79/dts/qca9557_zyxel_nbg6616.dts index 4372a07d51..828096f8f6 100644 --- a/target/linux/ath79/dts/qca9557_zyxel_nbg6616.dts +++ b/target/linux/ath79/dts/qca9557_zyxel_nbg6616.dts @@ -6,7 +6,7 @@ / { compatible = "zyxel,nbg6616", "qca,qca9557"; - model = "ZyXEL NBG6616"; + model = "Zyxel NBG6616"; aliases { led-boot = &led_power; diff --git a/target/linux/ath79/dts/qca9558_zyxel_emg2926_q10a.dts b/target/linux/ath79/dts/qca9558_zyxel_emg2926_q10a.dts index c00109a5b4..bf8d0f2f95 100644 --- a/target/linux/ath79/dts/qca9558_zyxel_emg2926_q10a.dts +++ b/target/linux/ath79/dts/qca9558_zyxel_emg2926_q10a.dts @@ -4,5 +4,5 @@ / { compatible = "zyxel,emg2926-q10a", "zyxel,nbg6716", "qca,qca9558"; - model = "ZyXEL EMG2926-Q10A"; + model = "Zyxel EMG2926-Q10A"; }; diff --git a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts index 19f1245022..463553fe27 100644 --- a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts +++ b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts @@ -6,7 +6,7 @@ / { compatible = "zyxel,nbg6716", "qca,qca9558"; - model = "ZyXEL NBG6716"; + model = "Zyxel NBG6716"; aliases { led-boot = &led_power; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 98968241e9..459d595a42 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -3262,7 +3262,7 @@ TARGET_DEVICES += zbtlink_zbt-wd323 define Device/zyxel_nwa11xx $(Device/loader-okli-uimage) SOC := ar9342 - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel LOADER_FLASH_OFFS := 0x050000 KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 IMAGE_SIZE := 8192k @@ -3309,7 +3309,7 @@ TARGET_DEVICES += zyxel_nwa1123-ni define Device/zyxel_nbg6616 SOC := qca9557 - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := NBG6616 DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-rtc-pcf8563 \ kmod-ath10k-ct ath10k-firmware-qca988x-ct diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk index 1a7eebc92a..a3bdedaf6d 100644 --- a/target/linux/ath79/image/nand.mk +++ b/target/linux/ath79/image/nand.mk @@ -487,7 +487,7 @@ TARGET_DEVICES += zte_mf286r define Device/zyxel_nbg6716 SOC := qca9558 - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := NBG6716 DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct \ ath10k-firmware-qca988x-ct diff --git a/target/linux/bcm27xx/patches-6.6/950-0106-Add-support-for-all-the-downstream-rpi-sound-card-dr.patch b/target/linux/bcm27xx/patches-6.6/950-0106-Add-support-for-all-the-downstream-rpi-sound-card-dr.patch index b55df94070..0b77d89e80 100644 --- a/target/linux/bcm27xx/patches-6.6/950-0106-Add-support-for-all-the-downstream-rpi-sound-card-dr.patch +++ b/target/linux/bcm27xx/patches-6.6/950-0106-Add-support-for-all-the-downstream-rpi-sound-card-dr.patch @@ -1541,7 +1541,7 @@ Signed-off-by: Phil Elwell +zidoo Shenzhen Zidoo Technology Co., Ltd. +zii Zodiac Inflight Innovations +zte ZTE Corp. -+zyxel ZyXEL Communications Corp. ++zyxel Zyxel Communications Corp. --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -196,6 +196,8 @@ patternProperties: diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-nbg6617.dts index f8e24ca53d..957ccb306c 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-nbg6617.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-nbg6617.dts @@ -8,7 +8,7 @@ #include / { - model = "ZyXEL NBG6617"; + model = "Zyxel NBG6617"; compatible = "zyxel,nbg6617"; chosen { @@ -239,7 +239,7 @@ partition12@6a0000 { label = "not_root_data"; /* - * for some strange reason, someone at ZyXEL + * for some strange reason, someone at Zyxel * had the "great" idea to put the rootfs_data * in front of rootfs... Don't do that! * As a result this one, full MebiByte remains diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-wre6606.dts index d59c41fab1..83ae05c626 100644 --- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-wre6606.dts +++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4018-wre6606.dts @@ -22,7 +22,7 @@ #include / { - model = "ZyXEL WRE6606"; + model = "Zyxel WRE6606"; compatible = "zyxel,wre6606"; aliases { diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index 929cff72ea..0aff89afa3 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -1279,7 +1279,7 @@ TARGET_DEVICES += zte_mf289f define Device/zyxel_nbg6617 $(call Device/FitImageLzma) - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := NBG6617 SOC := qcom-ipq4018 KERNEL_SIZE := 4096k @@ -1289,7 +1289,7 @@ define Device/zyxel_nbg6617 RAS_VERSION := "$(VERSION_DIST) $(REVISION)" IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata IMAGES += factory.bin -# The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is +# The Zyxel firmware allows flashing thru the web-gui only when the rootfs is # at least as large as the one of the initial firmware image (not the current # one on the device). This only applies to the Web-UI, the bootlaoder ignores # this minimum-size. However, the larger image can be flashed both ways. @@ -1301,7 +1301,7 @@ TARGET_DEVICES += zyxel_nbg6617 define Device/zyxel_wre6606 $(call Device/FitImage) - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := WRE6606 DEVICE_DTS_CONFIG := config@4 SOC := qcom-ipq4018 diff --git a/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8065-nbg6817.dts index 7d22b4f541..9a9251e9b9 100644 --- a/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8065-nbg6817.dts +++ b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8065-nbg6817.dts @@ -4,7 +4,7 @@ #include / { - model = "ZyXEL NBG6817"; + model = "Zyxel NBG6817"; compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064"; memory@0 { diff --git a/target/linux/ipq806x/image/generic.mk b/target/linux/ipq806x/image/generic.mk index b5bf8898ab..112793d5fd 100644 --- a/target/linux/ipq806x/image/generic.mk +++ b/target/linux/ipq806x/image/generic.mk @@ -74,7 +74,7 @@ define Device/TpSafeImage tplink-safeloader sysupgrade | append-metadata endef -define Device/ZyXELImage +define Device/ZyxelImage KERNEL_SUFFIX := -uImage KERNEL = kernel-bin | append-dtb | uImage none | \ pad-to $$(KERNEL_SIZE) @@ -578,7 +578,7 @@ TARGET_DEVICES += ubnt_unifi-ac-hd define Device/zyxel_nbg6817 $(Device/dsa-migration) - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := NBG6817 SOC := qcom-ipq8065 KERNEL_SIZE := 4096k @@ -590,6 +590,6 @@ define Device/zyxel_nbg6817 SUPPORTED_DEVICES += nbg6817 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs \ kmod-fs-ext4 losetup - $(call Device/ZyXELImage) + $(call Device/ZyxelImage) endef TARGET_DEVICES += zyxel_nbg6817 diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nsa310b.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nsa310b.dts index 12e51d6656..594be97929 100644 --- a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nsa310b.dts +++ b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-nsa310b.dts @@ -8,7 +8,7 @@ */ / { - model = "ZyXEL NSA310b"; + model = "Zyxel NSA310b"; compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; aliases { diff --git a/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-nsa310b.dts b/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-nsa310b.dts index 12e51d6656..594be97929 100644 --- a/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-nsa310b.dts +++ b/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-nsa310b.dts @@ -8,7 +8,7 @@ */ / { - model = "ZyXEL NSA310b"; + model = "Zyxel NSA310b"; compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; aliases { diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile index e64785c5a1..eaced92657 100644 --- a/target/linux/kirkwood/image/Makefile +++ b/target/linux/kirkwood/image/Makefile @@ -373,7 +373,7 @@ endef TARGET_DEVICES += seagate_goflexhome define Device/zyxel_nsa310b - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := NSA310b DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \ kmod-gpio-button-hotplug kmod-hwmon-lm85 kmod-rtc-mv @@ -382,7 +382,7 @@ endef TARGET_DEVICES += zyxel_nsa310b define Device/zyxel_nsa310s - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := NSA310S DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \ kmod-gpio-button-hotplug kmod-rtc-mv @@ -390,7 +390,7 @@ endef TARGET_DEVICES += zyxel_nsa310s define Device/zyxel_nsa325 - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := NSA325 DEVICE_VARIANT := v1/v2 DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \ diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts index 760bced2d2..cf850ad5d9 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_zyxel_p-2601hn.dts @@ -5,7 +5,7 @@ / { compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9"; - model = "ZyXEL P-2601HN-Fx"; + model = "Zyxel P-2601HN-Fx"; chosen { bootargs = "console=ttyLTQ0,115200"; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts index 4a7f63b177..247b811b4f 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts @@ -2,7 +2,7 @@ / { compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9"; - model = "ZyXEL P-2812HNU-F1"; + model = "Zyxel P-2812HNU-F1"; leds { usb1 { diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f3.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f3.dts index 376cdaeb61..a7fd3d3ec8 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f3.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f3.dts @@ -2,7 +2,7 @@ / { compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9"; - model = "ZyXEL P-2812HNU-F3"; + model = "Zyxel P-2812HNU-F3"; }; &pci0 { diff --git a/target/linux/lantiq/image/ar9.mk b/target/linux/lantiq/image/ar9.mk index 3a301f3655..f4a15cfb3e 100644 --- a/target/linux/lantiq/image/ar9.mk +++ b/target/linux/lantiq/image/ar9.mk @@ -159,7 +159,7 @@ endef TARGET_DEVICES += zte_h201l define Device/zyxel_p-2601hn - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := P-2601HN DEVICE_VARIANT := F1/F3 IMAGE_SIZE := 15616k diff --git a/target/linux/lantiq/image/vr9.mk b/target/linux/lantiq/image/vr9.mk index dc307e1ee4..d4bded9cae 100644 --- a/target/linux/lantiq/image/vr9.mk +++ b/target/linux/lantiq/image/vr9.mk @@ -370,7 +370,7 @@ TARGET_DEVICES += netgear_dm200 define Device/zyxel_p-2812hnu-f1 $(Device/dsa-migration) $(Device/NAND) - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := P-2812HNU DEVICE_VARIANT := F1 BOARD_NAME := P2812HNUF1 @@ -384,7 +384,7 @@ TARGET_DEVICES += zyxel_p-2812hnu-f1 define Device/zyxel_p-2812hnu-f3 $(Device/dsa-migration) $(Device/NAND) - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := P-2812HNU DEVICE_VARIANT := F3 BOARD_NAME := P2812HNUF3 diff --git a/target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts b/target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts index 54df8c054a..95247eba9d 100644 --- a/target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts +++ b/target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts @@ -4,7 +4,7 @@ #include "mt7981.dtsi" / { - model = "ZyXEL NWA50AX Pro"; + model = "Zyxel NWA50AX Pro"; compatible = "zyxel,nwa50ax-pro", "mediatek,mt7981"; aliases { diff --git a/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts b/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts index 29961e528c..9e7449b17f 100644 --- a/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts +++ b/target/linux/mediatek/dts/mt7986a-zyxel-ex5700-telenor.dts @@ -8,7 +8,7 @@ #include "mt7986a.dtsi" / { - model = "ZyXEL EX5700 (Telenor)"; + model = "Zyxel EX5700 (Telenor)"; compatible = "zyxel,ex5700-telenor", "mediatek,mt7986a"; aliases { diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 453bdf1046..40e58f9754 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -1461,7 +1461,7 @@ endef TARGET_DEVICES += zyxel_ex5601-t0-ubootmod define Device/zyxel_ex5700-telenor - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := EX5700 (Telenor) DEVICE_DTS := mt7986a-zyxel-ex5700-telenor DEVICE_DTS_DIR := ../dts @@ -1475,7 +1475,7 @@ endef TARGET_DEVICES += zyxel_ex5700-telenor define Device/zyxel_nwa50ax-pro - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := NWA50AX Pro DEVICE_DTS := mt7981b-zyxel-nwa50ax-pro DEVICE_DTS_DIR := ../dts diff --git a/target/linux/ramips/dts/mt7620a_zyxel_keenetic-viva.dts b/target/linux/ramips/dts/mt7620a_zyxel_keenetic-viva.dts index d095b45630..9921db770a 100644 --- a/target/linux/ramips/dts/mt7620a_zyxel_keenetic-viva.dts +++ b/target/linux/ramips/dts/mt7620a_zyxel_keenetic-viva.dts @@ -6,7 +6,7 @@ / { compatible = "zyxel,keenetic-viva", "ralink,mt7620a-soc"; - model = "ZyXEL Keenetic Viva"; + model = "Zyxel Keenetic Viva"; aliases { led-boot = &led_power_green; diff --git a/target/linux/ramips/dts/mt7620n_zyxel_keenetic-lite-iii-a.dts b/target/linux/ramips/dts/mt7620n_zyxel_keenetic-lite-iii-a.dts index 899479781e..eb3e8aac54 100644 --- a/target/linux/ramips/dts/mt7620n_zyxel_keenetic-lite-iii-a.dts +++ b/target/linux/ramips/dts/mt7620n_zyxel_keenetic-lite-iii-a.dts @@ -8,7 +8,7 @@ / { compatible = "zyxel,keenetic-lite-iii-a", "ralink,mt7620n-soc"; - model = "ZyXEL Keenetic Lite III (rev. A)"; + model = "Zyxel Keenetic Lite III (rev. A)"; aliases { led-boot = &led_wan; diff --git a/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni-ii.dts b/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni-ii.dts index dd1d256f41..ff4667f458 100644 --- a/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni-ii.dts +++ b/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni-ii.dts @@ -6,7 +6,7 @@ / { compatible = "zyxel,keenetic-omni-ii", "ralink,mt7620n-soc"; - model = "ZyXEL Keenetic Omni II"; + model = "Zyxel Keenetic Omni II"; aliases { led-boot = &led_power; diff --git a/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni.dts b/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni.dts index 0ba185b7eb..b5722d2427 100644 --- a/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni.dts +++ b/target/linux/ramips/dts/mt7620n_zyxel_keenetic-omni.dts @@ -6,7 +6,7 @@ / { compatible = "zyxel,keenetic-omni", "ralink,mt7620n-soc"; - model = "ZyXEL Keenetic Omni"; + model = "Zyxel Keenetic Omni"; aliases { led-boot = &led_power; diff --git a/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts b/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts index edc861db61..9eed123157 100644 --- a/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts +++ b/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts @@ -7,7 +7,7 @@ / { compatible = "zyxel,lte3301-plus", "mediatek,mt7621-soc"; - model = "ZyXEL LTE3301-Plus"; + model = "Zyxel LTE3301-Plus"; aliases { label-mac-device = &gmac0; diff --git a/target/linux/ramips/dts/mt7621_zyxel_lte5398-m904.dts b/target/linux/ramips/dts/mt7621_zyxel_lte5398-m904.dts index ca8adfe10e..e121077b0a 100644 --- a/target/linux/ramips/dts/mt7621_zyxel_lte5398-m904.dts +++ b/target/linux/ramips/dts/mt7621_zyxel_lte5398-m904.dts @@ -8,7 +8,7 @@ / { compatible = "zyxel,lte5398-m904", "mediatek,mt7621-soc"; - model = "ZyXEL LTE5398-M904"; + model = "Zyxel LTE5398-M904"; aliases { label-mac-device = &gmac0; diff --git a/target/linux/ramips/dts/mt7621_zyxel_nr7101.dts b/target/linux/ramips/dts/mt7621_zyxel_nr7101.dts index 756d4bd6e6..070ea4a13f 100644 --- a/target/linux/ramips/dts/mt7621_zyxel_nr7101.dts +++ b/target/linux/ramips/dts/mt7621_zyxel_nr7101.dts @@ -7,7 +7,7 @@ / { compatible = "zyxel,nr7101", "mediatek,mt7621-soc"; - model = "ZyXEL NR7101"; + model = "Zyxel NR7101"; aliases { led-boot = &led_system_green; diff --git a/target/linux/ramips/dts/mt7621_zyxel_nwa50ax.dts b/target/linux/ramips/dts/mt7621_zyxel_nwa50ax.dts index 2cdaa40a1c..1ae3b9ad63 100644 --- a/target/linux/ramips/dts/mt7621_zyxel_nwa50ax.dts +++ b/target/linux/ramips/dts/mt7621_zyxel_nwa50ax.dts @@ -5,7 +5,7 @@ / { compatible = "zyxel,nwa50ax", "mediatek,mt7621-soc"; - model = "ZyXEL NWA50AX"; + model = "Zyxel NWA50AX"; aliases { led-boot = &led_system_green; diff --git a/target/linux/ramips/dts/mt7621_zyxel_nwa55axe.dts b/target/linux/ramips/dts/mt7621_zyxel_nwa55axe.dts index 7f0a6d2cdf..0dc4943cb4 100644 --- a/target/linux/ramips/dts/mt7621_zyxel_nwa55axe.dts +++ b/target/linux/ramips/dts/mt7621_zyxel_nwa55axe.dts @@ -2,5 +2,5 @@ / { compatible = "zyxel,nwa55axe", "mediatek,mt7621-soc"; - model = "ZyXEL NWA55AXE"; + model = "Zyxel NWA55AXE"; }; diff --git a/target/linux/ramips/dts/mt7621_zyxel_wap6805.dts b/target/linux/ramips/dts/mt7621_zyxel_wap6805.dts index eabfcc2ef0..b3e8f6db74 100644 --- a/target/linux/ramips/dts/mt7621_zyxel_wap6805.dts +++ b/target/linux/ramips/dts/mt7621_zyxel_wap6805.dts @@ -8,7 +8,7 @@ / { compatible = "zyxel,wap6805", "mediatek,mt7621-soc"; - model = "ZyXEL WAP6805"; + model = "Zyxel WAP6805"; aliases { led-boot = &led_status_green; diff --git a/target/linux/ramips/dts/mt7621_zyxel_wsm20.dts b/target/linux/ramips/dts/mt7621_zyxel_wsm20.dts index 6bf65a0218..42dc716027 100644 --- a/target/linux/ramips/dts/mt7621_zyxel_wsm20.dts +++ b/target/linux/ramips/dts/mt7621_zyxel_wsm20.dts @@ -7,7 +7,7 @@ / { compatible = "zyxel,wsm20", "mediatek,mt7621-soc"; - model = "ZyXEL WSM20"; + model = "Zyxel WSM20"; aliases { led-boot = &led_system_white; diff --git a/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts b/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts index 70956724fb..3e59fc6bf4 100644 --- a/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts +++ b/target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts @@ -6,7 +6,7 @@ / { compatible = "zyxel,keenetic-extra-ii", "mediatek,mt7628an-soc"; - model = "ZyXEL Keenetic Extra II"; + model = "Zyxel Keenetic Extra II"; aliases { led-boot = &led_power; diff --git a/target/linux/ramips/dts/rt3052_zyxel_keenetic.dts b/target/linux/ramips/dts/rt3052_zyxel_keenetic.dts index e7db3eda15..c7285150d9 100644 --- a/target/linux/ramips/dts/rt3052_zyxel_keenetic.dts +++ b/target/linux/ramips/dts/rt3052_zyxel_keenetic.dts @@ -6,7 +6,7 @@ / { compatible = "zyxel,keenetic", "ralink,rt3052-soc"; - model = "ZyXEL Keenetic"; + model = "Zyxel Keenetic"; aliases { led-boot = &led_power; diff --git a/target/linux/ramips/dts/rt3052_zyxel_nbg-419n.dts b/target/linux/ramips/dts/rt3052_zyxel_nbg-419n.dts index 8dee38c1f8..fc6cd21f3c 100644 --- a/target/linux/ramips/dts/rt3052_zyxel_nbg-419n.dts +++ b/target/linux/ramips/dts/rt3052_zyxel_nbg-419n.dts @@ -6,7 +6,7 @@ / { compatible = "zyxel,nbg-419n", "ralink,rt3052-soc"; - model = "ZyXEL NBG-419N"; + model = "Zyxel NBG-419N"; aliases { led-boot = &led_power; diff --git a/target/linux/ramips/dts/rt3352_zyxel_nbg-419n-v2.dts b/target/linux/ramips/dts/rt3352_zyxel_nbg-419n-v2.dts index f00fd58b71..ce776d4603 100644 --- a/target/linux/ramips/dts/rt3352_zyxel_nbg-419n-v2.dts +++ b/target/linux/ramips/dts/rt3352_zyxel_nbg-419n-v2.dts @@ -6,7 +6,7 @@ / { compatible = "zyxel,nbg-419n-v2", "ralink,rt3352-soc"; - model = "ZyXEL NBG-419N v2"; + model = "Zyxel NBG-419N v2"; aliases { led-boot = &led_power; diff --git a/target/linux/ramips/dts/rt5350_zyxel_keenetic-4g-b.dts b/target/linux/ramips/dts/rt5350_zyxel_keenetic-4g-b.dts index d37e4189a8..511d97a336 100644 --- a/target/linux/ramips/dts/rt5350_zyxel_keenetic-4g-b.dts +++ b/target/linux/ramips/dts/rt5350_zyxel_keenetic-4g-b.dts @@ -8,7 +8,7 @@ / { compatible = "zyxel,keenetic-4g-b", "ralink,rt5350-soc"; - model = "ZyXEL Keenetic 4G Rev.B"; + model = "Zyxel Keenetic 4G Rev.B"; aliases { led-boot = &led_power; diff --git a/target/linux/ramips/dts/rt5350_zyxel_keenetic-lite-b.dts b/target/linux/ramips/dts/rt5350_zyxel_keenetic-lite-b.dts index 658a71066a..433701397a 100644 --- a/target/linux/ramips/dts/rt5350_zyxel_keenetic-lite-b.dts +++ b/target/linux/ramips/dts/rt5350_zyxel_keenetic-lite-b.dts @@ -8,7 +8,7 @@ / { compatible = "zyxel,keenetic-lite-b", "ralink,rt5350-soc"; - model = "ZyXEL Keenetic Lite Rev.B"; + model = "Zyxel Keenetic Lite Rev.B"; aliases { led-boot = &led_power; diff --git a/target/linux/ramips/dts/rt5350_zyxel_keenetic-start.dts b/target/linux/ramips/dts/rt5350_zyxel_keenetic-start.dts index 663b9a3d8c..459350fade 100644 --- a/target/linux/ramips/dts/rt5350_zyxel_keenetic-start.dts +++ b/target/linux/ramips/dts/rt5350_zyxel_keenetic-start.dts @@ -8,7 +8,7 @@ / { compatible = "zyxel,keenetic-start", "ralink,rt5350-soc"; - model = "ZyXEL Keenetic Start"; + model = "Zyxel Keenetic Start"; aliases { led-boot = &led_power; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 51811a86ea..9f3a8dce0e 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -1574,7 +1574,7 @@ TARGET_DEVICES += zte_q7 define Device/zyxel_keenetic-lite-iii-a SOC := mt7620n IMAGE_SIZE := 7872k - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := Keenetic Lite III DEVICE_VARIANT := A IMAGES += factory.bin @@ -1586,7 +1586,7 @@ TARGET_DEVICES += zyxel_keenetic-lite-iii-a define Device/zyxel_keenetic-omni SOC := mt7620n IMAGE_SIZE := 7872k - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := Keenetic Omni DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport IMAGES += factory.bin @@ -1599,7 +1599,7 @@ TARGET_DEVICES += zyxel_keenetic-omni define Device/zyxel_keenetic-omni-ii SOC := mt7620n IMAGE_SIZE := 7872k - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := Keenetic Omni II DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport IMAGES += factory.bin @@ -1612,7 +1612,7 @@ TARGET_DEVICES += zyxel_keenetic-omni-ii define Device/zyxel_keenetic-viva SOC := mt7620a IMAGE_SIZE := 16064k - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := Keenetic Viva DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \ kmod-switch-rtl8367b diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 5f6399eaed..18dbbcadf3 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -3262,7 +3262,7 @@ TARGET_DEVICES += zio_freezio define Device/zyxel_lte3301-plus $(Device/nand) - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := LTE3301-PLUS KERNEL_SIZE := 31488k DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 kmod-usb-ledtrig-usbport \ @@ -3277,7 +3277,7 @@ TARGET_DEVICES += zyxel_lte3301-plus define Device/zyxel_lte5398-m904 $(Device/nand) - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := LTE5398-M904 KERNEL_SIZE := 31488k DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3 uqmi \ @@ -3292,7 +3292,7 @@ TARGET_DEVICES += zyxel_lte5398-m904 define Device/zyxel_nr7101 $(Device/nand) - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := NR7101 KERNEL_SIZE := 31488k DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi @@ -3304,7 +3304,7 @@ TARGET_DEVICES += zyxel_nr7101 define Device/zyxel_nwa-ax $(Device/nand) - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel KERNEL_SIZE := 8192k DEVICE_PACKAGES := kmod-mt7915-firmware zyxel-bootconfig KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb @@ -3329,7 +3329,7 @@ define Device/zyxel_wap6805 $(Device/nand) $(Device/uimage-lzma-loader) IMAGE_SIZE := 32448k - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := WAP6805 DEVICE_PACKAGES := kmod-mt7603 kmod-mt7621-qtn-rgmii -uboot-envtools KERNEL := $$(KERNEL/lzma-loader) | uImage none | uimage-padhdr 160 @@ -3340,7 +3340,7 @@ define Device/zyxel_wsm20 $(Device/nand) KERNEL_SIZE := 8192k IMAGE_SIZE := 41943040 - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := WSM20 DEVICE_PACKAGES := kmod-mt7915-firmware KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | znet-header V1.00(ABZF.0)C0 diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 71f09f816f..1eae3d3dee 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -1152,7 +1152,7 @@ TARGET_DEVICES += zbtlink_zbt-we1226 define Device/zyxel_keenetic-extra-ii IMAGE_SIZE := 29824k - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := Keenetic Extra II DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci \ kmod-usb-ledtrig-usbport diff --git a/target/linux/ramips/image/rt305x.mk b/target/linux/ramips/image/rt305x.mk index 815e03a8d4..f52098c733 100644 --- a/target/linux/ramips/image/rt305x.mk +++ b/target/linux/ramips/image/rt305x.mk @@ -1220,7 +1220,7 @@ TARGET_DEVICES += zte_mf283plus define Device/zyxel_keenetic SOC := rt3052 IMAGE_SIZE := 7872k - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := Keenetic DEVICE_PACKAGES := kmod-usb2 kmod-usb-ehci kmod-usb-ledtrig-usbport \ kmod-usb-dwc2 @@ -1233,7 +1233,7 @@ define Device/zyxel_keenetic-4g-b $(Device/uimage-lzma-loader) SOC := rt5350 IMAGE_SIZE := 7872k - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := Keenetic 4G DEVICE_VARIANT := B DEFAULT := n @@ -1244,7 +1244,7 @@ define Device/zyxel_keenetic-lite-b $(Device/uimage-lzma-loader) SOC := rt5350 IMAGE_SIZE := 7872k - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := Keenetic Lite DEVICE_VARIANT := B DEFAULT := n @@ -1254,7 +1254,7 @@ TARGET_DEVICES += zyxel_keenetic-lite-b define Device/zyxel_keenetic-start SOC := rt5350 IMAGE_SIZE := 3776k - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := Keenetic Start DEFAULT := n endef @@ -1263,7 +1263,7 @@ TARGET_DEVICES += zyxel_keenetic-start define Device/zyxel_nbg-419n SOC := rt3052 IMAGE_SIZE := 3776k - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := NBG-419N SUPPORTED_DEVICES += nbg-419n DEFAULT := n @@ -1274,7 +1274,7 @@ define Device/zyxel_nbg-419n-v2 $(Device/uimage-lzma-loader) SOC := rt3352 IMAGE_SIZE := 7872k - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel DEVICE_MODEL := NBG-419N DEVICE_VARIANT := v2 SUPPORTED_DEVICES += nbg-419n2 diff --git a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-10hp.dts b/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-10hp.dts index 82df6789a9..190a77b7ff 100644 --- a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-10hp.dts +++ b/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-10hp.dts @@ -4,7 +4,7 @@ / { compatible = "zyxel,gs1900-10hp", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-10HP Switch"; + model = "Zyxel GS1900-10HP Switch"; /* i2c of the left SFP cage: port 9 */ i2c0: i2c-gpio-0 { diff --git a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8.dts b/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8.dts index 7aa1cc274c..548e83ba73 100644 --- a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8.dts +++ b/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8.dts @@ -4,7 +4,7 @@ / { compatible = "zyxel,gs1900-8", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-8v1/v2 Switch"; + model = "Zyxel GS1900-8v1/v2 Switch"; }; &gpio1 { diff --git a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v1.dts b/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v1.dts index 5ee340eac6..386edfb015 100644 --- a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v1.dts +++ b/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v1.dts @@ -4,7 +4,7 @@ / { compatible = "zyxel,gs1900-8hp-v1", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-8HP v1 Switch"; + model = "Zyxel GS1900-8HP v1 Switch"; }; &uart1 { diff --git a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v2.dts b/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v2.dts index 0768462255..2702f2ba1c 100644 --- a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v2.dts +++ b/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v2.dts @@ -4,7 +4,7 @@ / { compatible = "zyxel,gs1900-8hp-v2", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-8HP v2 Switch"; + model = "Zyxel GS1900-8HP v2 Switch"; }; &uart1 { diff --git a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-16.dts b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-16.dts index ac2eea7015..6010da2e26 100644 --- a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-16.dts +++ b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-16.dts @@ -4,7 +4,7 @@ / { compatible = "zyxel,gs1900-16", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-16"; + model = "Zyxel GS1900-16"; }; &mdio { diff --git a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24-v1.dts b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24-v1.dts index 81482dde10..6d98e7fae1 100644 --- a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24-v1.dts +++ b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24-v1.dts @@ -4,7 +4,7 @@ / { compatible = "zyxel,gs1900-24-v1", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-24 v1"; + model = "Zyxel GS1900-24 v1"; memory@0 { reg = <0x0 0x4000000>; diff --git a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24e.dts b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24e.dts index 3d00034a3b..b455ddf23a 100644 --- a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24e.dts +++ b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24e.dts @@ -4,7 +4,7 @@ / { compatible = "zyxel,gs1900-24e", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-24E"; + model = "Zyxel GS1900-24E"; }; &mdio { diff --git a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24ep.dts b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24ep.dts index 8a77121f4c..25c82f089e 100644 --- a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24ep.dts +++ b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24ep.dts @@ -4,7 +4,7 @@ / { compatible = "zyxel,gs1900-24ep", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-24EP Switch"; + model = "Zyxel GS1900-24EP Switch"; }; &uart1 { diff --git a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v1.dts b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v1.dts index 7bb3410a31..fa9bef89d6 100644 --- a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v1.dts +++ b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v1.dts @@ -4,7 +4,7 @@ / { compatible = "zyxel,gs1900-24hp-v1", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-24HP v1"; + model = "Zyxel GS1900-24HP v1"; memory@0 { reg = <0x0 0x4000000>; diff --git a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v2.dts b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v2.dts index 7b6a9a1e7f..93011cbdaa 100644 --- a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v2.dts +++ b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v2.dts @@ -4,7 +4,7 @@ / { compatible = "zyxel,gs1900-24hp-v2", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-24HP v2 Switch"; + model = "Zyxel GS1900-24HP v2 Switch"; /* i2c of the left SFP cage: port 25 */ i2c0: i2c-gpio-0 { diff --git a/target/linux/realtek/image/common.mk b/target/linux/realtek/image/common.mk index 37370f1999..27fcea86ec 100644 --- a/target/linux/realtek/image/common.mk +++ b/target/linux/realtek/image/common.mk @@ -57,7 +57,7 @@ define Device/hpe_1920 endef define Device/zyxel_gs1900 - DEVICE_VENDOR := ZyXEL + DEVICE_VENDOR := Zyxel IMAGE_SIZE := 6976k UIMAGE_MAGIC := 0x83800000 KERNEL_INITRAMFS := \ diff --git a/target/linux/realtek/image/rtl838x.mk b/target/linux/realtek/image/rtl838x.mk index 7c64d8d667..05574e5375 100644 --- a/target/linux/realtek/image/rtl838x.mk +++ b/target/linux/realtek/image/rtl838x.mk @@ -314,7 +314,7 @@ define Device/zyxel_gs1900-8 SOC := rtl8380 DEVICE_MODEL := GS1900-8 DEVICE_VARIANT := v1 - DEVICE_ALT0_VENDOR := ZyXEL + DEVICE_ALT0_VENDOR := Zyxel DEVICE_ALT0_MODEL := GS1900-8 DEVICE_ALT0_VARIANT := v2 ZYXEL_VERS := AAHH