From: Mathias Kresin <dev@kresin.me>
Date: Sun, 28 Oct 2018 10:03:49 +0000 (+0100)
Subject: ath79: fix PQI Air Pen support
X-Git-Tag: state~725
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=374e64672447e2c0af7a4cd2d10baa71757a0dd9;p=openwrt%2Fstaging%2Fchunkeey.git

ath79: fix PQI Air Pen support

Use the correct dts filename. It has to be <soc>_<manufacturer>_<device>.

Signed-off-by: Mathias Kresin <dev@kresin.me>
---

diff --git a/target/linux/ath79/dts/ar9330_pqi-air-pen.dts b/target/linux/ath79/dts/ar9330_pqi-air-pen.dts
deleted file mode 100644
index 6c662d2202..0000000000
--- a/target/linux/ath79/dts/ar9330_pqi-air-pen.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9330.dtsi"
-
-/ {
-	model = "PQI Air-Pen";
-	compatible = "pqi,air-pen", "qca,ar9330";
-
-	aliases {
-		serial0 = &uart;
-		led-boot = &wlan;
-		led-failsafe = &wlan;
-		led-upgrade = &wlan;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wlan: wlan {
-			label = "air-pen:blue:wlan";
-			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wps {
-			label = "air-pen:blue:wps";
-			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-			debounce-interval = <60>;
-		};
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
-			debounce-interval = <60>;
-		};
-	};
-};
-
-&uart {
-	status = "okay";
-};
-
-&gpio {
-	status = "okay";
-};
-
-&usb {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&spi {
-	num-cs = <1>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <104000000>;
-		reg = <0>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x000000 0x040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "u-boot-env";
-				reg = <0x040000 0x010000>;
-			};
-
-			art: partition@50000 {
-				label = "art";
-				reg = <0x050000 0x010000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "NVRAM";
-				reg = <0x060000 0x010000>;
-				read-only;
-			};
-
-			partition@70000 {
-				label = "firmware";
-				reg = <0x070000 0x780000>;
-			};
-
-			partition@7f0000 {
-				label = "CONF";
-				reg = <0x7f0000 0x010000>;
-				read-only;
-			};
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	mtd-mac-address = <&art 0x1002>;
-
-	gmac-config {
-		device = <&gmac>;
-
-		switch-phy-addr-swap = <0>;
-		switch-phy-swap = <0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	compatible = "syscon", "simple-mfd";
-};
-
-&wmac {
-	status = "okay";
-	mtd-cal-data = <&art 0x1000>;
-	mtd-mac-address = <&art 0x2>;
-};
diff --git a/target/linux/ath79/dts/ar9330_pqi_air-pen.dts b/target/linux/ath79/dts/ar9330_pqi_air-pen.dts
new file mode 100644
index 0000000000..6c662d2202
--- /dev/null
+++ b/target/linux/ath79/dts/ar9330_pqi_air-pen.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9330.dtsi"
+
+/ {
+	model = "PQI Air-Pen";
+	compatible = "pqi,air-pen", "qca,ar9330";
+
+	aliases {
+		serial0 = &uart;
+		led-boot = &wlan;
+		led-failsafe = &wlan;
+		led-upgrade = &wlan;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan: wlan {
+			label = "air-pen:blue:wlan";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wps {
+			label = "air-pen:blue:wps";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-cs = <1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x040000 0x010000>;
+			};
+
+			art: partition@50000 {
+				label = "art";
+				reg = <0x050000 0x010000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "NVRAM";
+				reg = <0x060000 0x010000>;
+				read-only;
+			};
+
+			partition@70000 {
+				label = "firmware";
+				reg = <0x070000 0x780000>;
+			};
+
+			partition@7f0000 {
+				label = "CONF";
+				reg = <0x7f0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	mtd-mac-address = <&art 0x1002>;
+
+	gmac-config {
+		device = <&gmac>;
+
+		switch-phy-addr-swap = <0>;
+		switch-phy-swap = <0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+	status = "okay";
+	mtd-cal-data = <&art 0x1000>;
+	mtd-mac-address = <&art 0x2>;
+};