From: Gabor Juhos Date: Thu, 12 Jul 2012 13:29:46 +0000 (+0000) Subject: ramips: rt305x: add support for Edimax 3G-6200N X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=372945185d06e388dd834e3fcd85c7f0c1893899;p=openwrt%2Fstaging%2Flinusw.git ramips: rt305x: add support for Edimax 3G-6200N Support for Edimax 3G-6200N router with USB. Signed-off-by: Lukasz Golebiowski SVN-Revision: 32682 --- diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 95e504f1da..68aa0ee863 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -30,6 +30,9 @@ status_led_off() { get_status_led() { case $(ramips_board_name) in + 3g-6200n) + status_led="edimax:green:power" + ;; argus-atp52b) status_led="argus-atp52b:green:run" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index c5d0d6978b..d7542cab4d 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -48,6 +48,7 @@ case "$FIRMWARE" in rt2x00_eeprom_extract "u-boot" 262144 272 ;; + 3g-6200n | \ all0256n | \ argus-atp52b | \ bc2 | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds index fdfce39e8a..fbbd09d9eb 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/leds @@ -14,6 +14,10 @@ set_wifi_led() { board=$(ramips_board_name) case $board in + 3g-6200n) + set_wifi_led "edimax:amber:wlan" + set_usb_led "edimax:blue:3g" + ;; all0256n) set_wifi_led "rt2800pci-phy0::radio" ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index cc3f212151..1c65b65a72 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -21,6 +21,7 @@ ramips_setup_interfaces() ucidef_set_interface_lan "eth0.1" ;; + 3g-6200n | \ argus-atp52b | \ b2c | \ nw718 | \ @@ -89,7 +90,7 @@ ramips_setup_macs() all0256n) lan_mac=$(ramips_get_mac_binary factory 40) ;; - + 3g-6200n | \ argus-atp52b | \ b2c | \ f5d8235-v1 | \ diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index a605b22f8c..db6e5c82f8 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -8,6 +8,10 @@ preinit_set_mac_address() { . /lib/ramips.sh case $(ramips_board_name) in + 3g-6200n) + mac=$(ramips_get_mac_binary factory 4) + ifconfig eth0 hw ether $mac 2>/dev/null + ;; bc2 |\ esr-9753 |\ freestation5 |\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index a5a173436e..277d9da997 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -47,6 +47,9 @@ ramips_board_name() { machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo) case "$machine" in + *"Edimax 3g-6200n") + name="3g-6200n" + ;; *"Allnet ALL0256N") name="all0256n" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 1292b83e79..dba5e793b1 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -14,6 +14,7 @@ platform_check_image() { [ "$ARGC" -gt 1 ] && return 1 case "$board" in + 3g-6200n | \ all0256n | \ bc2 | \ dir-300-b1 | \ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index d0476f59ba..6ff24f2f9d 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -21,6 +21,7 @@ enum ramips_mach_type { RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */ /* RT3050 based machines */ + RAMIPS_MACH_3G_6200N, /* Edimax 3G-6200N */ RAMIPS_MACH_ALL0256N, /* Allnet ALL0256N */ RAMIPS_MACH_DIR_300_B1, /* D-Link DIR-300 B1 */ RAMIPS_MACH_DIR_600_B1, /* D-Link DIR-600 B1 */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig index 15d3a4c291..77269fe5c4 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig @@ -2,6 +2,11 @@ if RALINK_RT305X menu "Ralink RT350x machine selection" +config RT305X_MACH_3G_6200N + bool "Edimax 3G-6200N board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT305X_MACH_WR6202 bool "Accton WR6202" select RALINK_DEV_GPIO_BUTTONS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile index 9fe1991fc3..bb8cf07060 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile @@ -11,6 +11,7 @@ obj-y := irq.o setup.o devices.o rt305x.o clock.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_RT305X_MACH_3G_6200N) += mach-3g-6200n.o obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o obj-$(CONFIG_RT305X_MACH_ALL0256N) += mach-all0256n.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-3g-6200n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-3g-6200n.c new file mode 100644 index 0000000000..ade4fe9008 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-3g-6200n.c @@ -0,0 +1,86 @@ +/* + * Edimax 3g-6200n board support + * + * Copyright (C) 2011 Andrzej Hajda + * Copyright (C) 2012 Lukasz Golebiowski + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + + +#include +#include + +#include +#include +#include +#include +#include + +#include "devices.h" + +#define EDIMAX_GPIO_BUTTON_WPS 12 +#define EDIMAX_GPIO_BTN_0 13 /* Wifi on/off switch button */ + +#define EDIMAX_GPIO_LED_POWER 9 +#define EDIMAX_GPIO_LED_WLAN 14 +#define EDIMAX_GPIO_LED_3G 7 + +#define EDIMAX_KEYS_POLL_INTERVAL 20 +#define EDIMAX_KEYS_DEBOUNCE_INTERVAL (3 * EDIMAX_KEYS_POLL_INTERVAL) + +static struct gpio_led edimax_leds_gpio[] __initdata = { + { + .name = "edimax:green:power", + .gpio = EDIMAX_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "edimax:amber:wlan", + .gpio = EDIMAX_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "edimax:blue:3g", + .gpio = EDIMAX_GPIO_LED_3G, + .active_low = 1, + } +}; + +static struct gpio_keys_button edimax_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL, + .gpio = EDIMAX_GPIO_BUTTON_WPS, + .active_low = 1, + }, { + .desc = "wlanswitch", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL, + .gpio = EDIMAX_GPIO_BTN_0, + .active_low = 1, + } +}; + +static void __init edimax_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(edimax_leds_gpio), + edimax_leds_gpio); + ramips_register_gpio_buttons(-1, EDIMAX_KEYS_POLL_INTERVAL, + ARRAY_SIZE(edimax_gpio_buttons), + edimax_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_3G_6200N, "3G-6200N", "Edimax 3g-6200n", + edimax_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index bf86134267..ce817282d3 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -124,6 +124,11 @@ define BuildFirmware/GENERIC_8M/initramfs $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M))) endef +mtdlayout_edimax_3g6200n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2752k(rootfs),128k@0x3e0000(cimage)ro,3648k@0x50000(firmware) +define BuildFirmware/3G6200N + $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_edimax_3g6200n)),917504,2818048) +endef + mtdlayout_argus_atp52b=192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware) mtd_argus_atp52b_kernel_part_size=1179648 mtd_argus_atp52b_rootfs_part_size=6815744 @@ -312,6 +317,10 @@ endif # # RT305X Profiles # +define Image/Build/Profile/3G6200N + $(call Image/Build/Template/$(fs_squash)/$(1),3G6200N,3g-6200n,3G-6200N,ttyS1,57600,phys) +endef + define Image/Build/Profile/ALL0256N $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,all0256n,ALL0256N,ttyS1,57600,spi) endef @@ -444,6 +453,7 @@ endef ifeq ($(CONFIG_RALINK_RT305X),y) define Image/Build/Profile/Default + $(call Image/Build/Profile/3G6200N,$(1)) $(call Image/Build/Profile/ALL0256N,$(1)) $(call Image/Build/Profile/ARGUS_ATP52B,$(1)) $(call Image/Build/Profile/BC2,$(1)) diff --git a/target/linux/ramips/rt305x/config-3.3 b/target/linux/ramips/rt305x/config-3.3 index 019f899301..3ad2857a39 100644 --- a/target/linux/ramips/rt305x/config-3.3 +++ b/target/linux/ramips/rt305x/config-3.3 @@ -87,6 +87,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y CONFIG_RALINK_RT305X=y # CONFIG_RALINK_RT3883 is not set CONFIG_RAMIPS_WDT=y +CONFIG_RT305X_MACH_3G_6200N=y CONFIG_RT305X_MACH_ALL0256N=y CONFIG_RT305X_MACH_ARGUS_ATP52B=y CONFIG_RT305X_MACH_BC2=y