From: Simon Glass Date: Tue, 6 Jan 2015 03:05:29 +0000 (-0700) Subject: dm: gpio: Add better functions to request GPIOs X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3669e0e759118fed3d371e2427b4b47d3969bfd0;p=project%2Fbcm63xx%2Fu-boot.git dm: gpio: Add better functions to request GPIOs At present U-Boot sort-of supports the standard way of reading GPIOs from device tree nodes, but the support is incomplete, a bit clunky and only works for GPIO bindings where #gpio-cells is 2. Add new functions to request GPIOs, taking full account of the device tree binding. These permit requesting a GPIO with a simple call like: gpio_request_by_name(dev, "cd-gpios", 0, &desc, GPIOD_IS_IN); This will request the GPIO, looking at the device's node which might be this, for example: cd-gpios = <&gpio TEGRA_GPIO(B, 3) GPIO_ACTIVE_LOW>; The GPIO will be set to input mode in this case and polarity will be honoured by the GPIO calls. It is also possible to request and free a list of GPIOs. Signed-off-by: Simon Glass --- diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index 0a4d9e4217..a69bbd2002 100644 --- a/drivers/gpio/gpio-uclass.c +++ b/drivers/gpio/gpio-uclass.c @@ -12,6 +12,8 @@ #include #include +DECLARE_GLOBAL_DATA_PTR; + /** * gpio_to_device() - Convert global GPIO number to device, number * @@ -92,8 +94,8 @@ int gpio_lookup_name(const char *name, struct udevice **devp, return 0; } -int gpio_find_and_xlate(struct gpio_desc *desc, - struct fdtdec_phandle_args *args) +static int gpio_find_and_xlate(struct gpio_desc *desc, + struct fdtdec_phandle_args *args) { struct dm_gpio_ops *ops = gpio_get_ops(desc->dev); @@ -132,6 +134,17 @@ static int dm_gpio_request(struct gpio_desc *desc, const char *label) return 0; } +static int dm_gpio_requestf(struct gpio_desc *desc, const char *fmt, ...) +{ + va_list args; + char buf[40]; + + va_start(args, fmt); + vscnprintf(buf, sizeof(buf), fmt, args); + va_end(args); + return dm_gpio_request(desc, buf); +} + /** * gpio_request() - [COMPAT] Request GPIO * gpio: GPIO number @@ -501,6 +514,155 @@ unsigned gpio_get_values_as_int(const int *gpio_num_array) return vector; } +static int _gpio_request_by_name_nodev(const void *blob, int node, + const char *list_name, int index, + struct gpio_desc *desc, int flags, + bool add_index) +{ + struct fdtdec_phandle_args args; + int ret; + + desc->dev = NULL; + desc->offset = 0; + ret = fdtdec_parse_phandle_with_args(blob, node, list_name, + "#gpio-cells", 0, index, &args); + if (ret) { + debug("%s: fdtdec_parse_phandle_with_args failed\n", __func__); + goto err; + } + + ret = uclass_get_device_by_of_offset(UCLASS_GPIO, args.node, + &desc->dev); + if (ret) { + debug("%s: uclass_get_device_by_of_offset failed\n", __func__); + goto err; + } + ret = gpio_find_and_xlate(desc, &args); + if (ret) { + debug("%s: gpio_find_and_xlate failed\n", __func__); + goto err; + } + ret = dm_gpio_requestf(desc, add_index ? "%s.%s%d" : "%s.%s", + fdt_get_name(blob, node, NULL), + list_name, index); + if (ret) { + debug("%s: dm_gpio_requestf failed\n", __func__); + goto err; + } + ret = dm_gpio_set_dir_flags(desc, flags | desc->flags); + if (ret) { + debug("%s: dm_gpio_set_dir failed\n", __func__); + goto err; + } + + return 0; +err: + debug("%s: Node '%s', property '%s', failed to request GPIO index %d: %d\n", + __func__, fdt_get_name(blob, node, NULL), list_name, index, ret); + return ret; +} + +int gpio_request_by_name_nodev(const void *blob, int node, + const char *list_name, int index, + struct gpio_desc *desc, int flags) +{ + return _gpio_request_by_name_nodev(blob, node, list_name, index, desc, + flags, index > 0); +} + +int gpio_request_by_name(struct udevice *dev, const char *list_name, int index, + struct gpio_desc *desc, int flags) +{ + /* + * This isn't ideal since we don't use dev->name in the debug() + * calls in gpio_request_by_name(), but we can do this until + * gpio_request_by_name_nodev() can be dropped. + */ + return gpio_request_by_name_nodev(gd->fdt_blob, dev->of_offset, + list_name, index, desc, flags); +} + +int gpio_request_list_by_name_nodev(const void *blob, int node, + const char *list_name, + struct gpio_desc *desc, int max_count, + int flags) +{ + int count; + int ret; + + for (count = 0; ; count++) { + if (count >= max_count) { + ret = -ENOSPC; + goto err; + } + ret = _gpio_request_by_name_nodev(blob, node, list_name, count, + &desc[count], flags, true); + if (ret == -ENOENT) + break; + else if (ret) + goto err; + } + + /* We ran out of GPIOs in the list */ + return count; + +err: + gpio_free_list_nodev(desc, count - 1); + + return ret; +} + +int gpio_request_list_by_name(struct udevice *dev, const char *list_name, + struct gpio_desc *desc, int max_count, + int flags) +{ + /* + * This isn't ideal since we don't use dev->name in the debug() + * calls in gpio_request_by_name(), but we can do this until + * gpio_request_list_by_name_nodev() can be dropped. + */ + return gpio_request_list_by_name_nodev(gd->fdt_blob, dev->of_offset, + list_name, desc, max_count, + flags); +} + +int gpio_get_list_count(struct udevice *dev, const char *list_name) +{ + int ret; + + ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, dev->of_offset, + list_name, "#gpio-cells", 0, -1, + NULL); + if (ret) { + debug("%s: Node '%s', property '%s', GPIO count failed: %d\n", + __func__, dev->name, list_name, ret); + } + + return ret; +} + +int dm_gpio_free(struct udevice *dev, struct gpio_desc *desc) +{ + /* For now, we don't do any checking of dev */ + return _dm_gpio_free(desc->dev, desc->offset); +} + +int gpio_free_list(struct udevice *dev, struct gpio_desc *desc, int count) +{ + int i; + + /* For now, we don't do any checking of dev */ + for (i = 0; i < count; i++) + dm_gpio_free(dev, &desc[i]); + + return 0; +} + +int gpio_free_list_nodev(struct gpio_desc *desc, int count) +{ + return gpio_free_list(NULL, desc, count); +} + /* We need to renumber the GPIOs when any driver is probed/removed */ static int gpio_renumber(struct udevice *removed_dev) { diff --git a/drivers/gpio/sandbox.c b/drivers/gpio/sandbox.c index 53c80d5be6..d564c252c7 100644 --- a/drivers/gpio/sandbox.c +++ b/drivers/gpio/sandbox.c @@ -8,6 +8,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -130,12 +131,31 @@ static int sb_gpio_get_function(struct udevice *dev, unsigned offset) return GPIOF_INPUT; } +static int sb_gpio_xlate(struct udevice *dev, struct gpio_desc *desc, + struct fdtdec_phandle_args *args) +{ + desc->offset = args->args[0]; + if (args->args_count < 2) + return 0; + if (args->args[1] & GPIO_ACTIVE_LOW) + desc->flags |= GPIOD_ACTIVE_LOW; + if (args->args[1] & 2) + desc->flags |= GPIOD_IS_IN; + if (args->args[1] & 4) + desc->flags |= GPIOD_IS_OUT; + if (args->args[1] & 8) + desc->flags |= GPIOD_IS_OUT_ACTIVE; + + return 0; +} + static const struct dm_gpio_ops gpio_sandbox_ops = { .direction_input = sb_gpio_direction_input, .direction_output = sb_gpio_direction_output, .get_value = sb_gpio_get_value, .set_value = sb_gpio_set_value, .get_function = sb_gpio_get_function, + .xlate = sb_gpio_xlate, }; static int sandbox_gpio_ofdata_to_platdata(struct udevice *dev) diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index c08c96340a..26534150f1 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -111,6 +111,18 @@ struct gpio_desc { */ }; +/** + * dm_gpio_is_valid() - Check if a GPIO is gpio_is_valie + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return true if valid, false if not + */ +static inline bool dm_gpio_is_valid(struct gpio_desc *desc) +{ + return desc->dev != NULL; +} + /** * gpio_get_status() - get the current GPIO status as a string * @@ -313,4 +325,191 @@ int gpio_lookup_name(const char *name, struct udevice **devp, */ unsigned gpio_get_values_as_int(const int *gpio_list); +/** + * gpio_request_by_name() - Locate and request a GPIO by name + * + * This operates by looking up the given list name in the device (device + * tree property) and requesting the GPIO for use. The property must exist + * in @dev's node. + * + * Use @flags to specify whether the GPIO should be an input or output. In + * principle this can also come from the device tree binding but most + * bindings don't provide this information. Specifically, when the GPIO uclass + * calls the xlate() method, it can return default flags, which are then + * ORed with this @flags. + * + * If we find that requesting the GPIO is not always needed we could add a + * new function or a new GPIOD_NO_REQUEST flag. + * + * At present driver model has no reference counting so if one device + * requests a GPIO which subsequently is unbound, the @desc->dev pointer + * will be invalid. However this will only happen if the GPIO device is + * unbound, not if it is removed, so this seems like a reasonable limitation + * for now. There is no real use case for unbinding drivers in normal + * operation. + * + * The device tree binding is doc/device-tree-bindings/gpio/gpio.txt in + * generate terms and each specific device may add additional details in + * a binding file in the same directory. + * + * @dev: Device requesting the GPIO + * @list_name: Name of GPIO list (e.g. "board-id-gpios") + * @index: Index number of the GPIO in that list use request (0=first) + * @desc: Returns GPIO description information. If there is no such + * GPIO, dev->dev will be NULL. + * @flags: Indicates the GPIO input/output settings (GPIOD_...) + * @return 0 if OK, -ENOENT if the GPIO does not exist, -EINVAL if there is + * something wrong with the list, or other -ve for another error (e.g. + * -EBUSY if a GPIO was already requested) + */ +int gpio_request_by_name(struct udevice *dev, const char *list_name, + int index, struct gpio_desc *desc, int flags); + +/** + * gpio_request_list_by_name() - Request a list of GPIOs + * + * Reads all the GPIOs from a list and requetss them. See + * gpio_request_by_name() for additional details. Lists should not be + * misused to hold unrelated or optional GPIOs. They should only be used + * for things like parallel data lines. A zero phandle terminates the list + * the list. + * + * This function will either succeed, and request all GPIOs in the list, or + * fail and request none (it will free already-requested GPIOs in case of + * an error part-way through). + * + * @dev: Device requesting the GPIO + * @list_name: Name of GPIO list (e.g. "board-id-gpios") + * @desc_list: Returns a list of GPIO description information + * @max_count: Maximum number of GPIOs to return (@desc_list must be at least + * this big) + * @flags: Indicates the GPIO input/output settings (GPIOD_...) + * @return number of GPIOs requested, or -ve on error + */ +int gpio_request_list_by_name(struct udevice *dev, const char *list_name, + struct gpio_desc *desc_list, int max_count, + int flags); + +/** + * gpio_get_list_count() - Returns the number of GPIOs in a list + * + * Counts the GPIOs in a list. See gpio_request_by_name() for additional + * details. + * + * @dev: Device requesting the GPIO + * @list_name: Name of GPIO list (e.g. "board-id-gpios") + * @return number of GPIOs (0 for an empty property) or -ENOENT if the list + * does not exist + */ +int gpio_get_list_count(struct udevice *dev, const char *list_name); + +/** + * gpio_request_by_name_nodev() - request GPIOs without a device + * + * This is a version of gpio_request_list_by_name() that does not use a + * device. Avoid it unless the caller is not yet using driver model + */ +int gpio_request_by_name_nodev(const void *blob, int node, + const char *list_name, + int index, struct gpio_desc *desc, int flags); + +/** + * gpio_request_list_by_name_nodev() - request GPIOs without a device + * + * This is a version of gpio_request_list_by_name() that does not use a + * device. Avoid it unless the caller is not yet using driver model + */ +int gpio_request_list_by_name_nodev(const void *blob, int node, + const char *list_name, + struct gpio_desc *desc_list, int max_count, + int flags); + +/** + * dm_gpio_free() - Free a single GPIO + * + * This frees a single GPIOs previously returned from gpio_request_by_name(). + * + * @dev: Device which requested the GPIO + * @desc: GPIO to free + * @return 0 if OK, -ve on error + */ +int dm_gpio_free(struct udevice *dev, struct gpio_desc *desc); + +/** + * gpio_free_list() - Free a list of GPIOs + * + * This frees a list of GPIOs previously returned from + * gpio_request_list_by_name(). + * + * @dev: Device which requested the GPIOs + * @desc: List of GPIOs to free + * @count: Number of GPIOs in the list + * @return 0 if OK, -ve on error + */ +int gpio_free_list(struct udevice *dev, struct gpio_desc *desc, int count); + +/** + * gpio_free_list_nodev() - free GPIOs without a device + * + * This is a version of gpio_free_list() that does not use a + * device. Avoid it unless the caller is not yet using driver model + */ +int gpio_free_list_nodev(struct gpio_desc *desc, int count); + +/** + * dm_gpio_get_value() - Get the value of a GPIO + * + * This is the driver model version of the existing gpio_get_value() function + * and should be used instead of that. + * + * For now, these functions have a dm_ prefix since they conflict with + * existing names. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return GPIO value (0 for inactive, 1 for active) or -ve on error + */ +int dm_gpio_get_value(struct gpio_desc *desc); + +int dm_gpio_set_value(struct gpio_desc *desc, int value); + +/** + * dm_gpio_set_dir() - Set the direction for a GPIO + * + * This sets up the direction according tot the provided flags. It will do + * nothing unless the direction is actually specified. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return 0 if OK, -ve on error + */ +int dm_gpio_set_dir(struct gpio_desc *desc); + +/** + * dm_gpio_set_dir_flags() - Set direction using specific flags + * + * This is like dm_gpio_set_dir() except that the flags value is provided + * instead of being used from desc->flags. This is needed because in many + * cases the GPIO description does not include direction information. + * Note that desc->flags is updated by this function. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @flags: New flags to use + * @return 0 if OK, -ve on error, in which case desc->flags is not updated + */ +int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags); + +/** + * gpio_get_number() - Get the global GPIO number of a GPIO + * + * This should only be used for debugging or interest. It returns the nummber + * that should be used for gpio_get_value() etc. to access this GPIO. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return GPIO number, or -ve if not found + */ +int gpio_get_number(struct gpio_desc *desc); + #endif /* _ASM_GENERIC_GPIO_H_ */ diff --git a/test/dm/gpio.c b/test/dm/gpio.c index 94bd0d99dc..b29daf1af4 100644 --- a/test/dm/gpio.c +++ b/test/dm/gpio.c @@ -174,5 +174,72 @@ static int dm_test_gpio_leak(struct dm_test_state *dms) return 0; } - DM_TEST(dm_test_gpio_leak, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +/* Test that we can find GPIOs using phandles */ +static int dm_test_gpio_phandles(struct dm_test_state *dms) +{ + struct gpio_desc desc, desc_list[8], desc_list2[8]; + struct udevice *dev, *gpio_a, *gpio_b; + + ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 0, &dev)); + ut_asserteq_str("a-test", dev->name); + + ut_assertok(gpio_request_by_name(dev, "test-gpios", 1, &desc, 0)); + ut_assertok(uclass_get_device(UCLASS_GPIO, 1, &gpio_a)); + ut_assertok(uclass_get_device(UCLASS_GPIO, 2, &gpio_b)); + ut_asserteq_str("base-gpios", gpio_a->name); + ut_asserteq(true, !!device_active(gpio_a)); + ut_asserteq_ptr(gpio_a, desc.dev); + ut_asserteq(4, desc.offset); + /* GPIOF_INPUT is the sandbox GPIO driver default */ + ut_asserteq(GPIOF_INPUT, gpio_get_function(gpio_a, 4, NULL)); + ut_assertok(dm_gpio_free(dev, &desc)); + + ut_asserteq(-ENOENT, gpio_request_by_name(dev, "test-gpios", 3, &desc, + 0)); + ut_asserteq_ptr(NULL, desc.dev); + ut_asserteq(desc.offset, 0); + ut_asserteq(-ENOENT, gpio_request_by_name(dev, "test-gpios", 5, &desc, + 0)); + + /* Last GPIO is ignord as it comes after <0> */ + ut_asserteq(3, gpio_request_list_by_name(dev, "test-gpios", desc_list, + ARRAY_SIZE(desc_list), 0)); + ut_asserteq(-EBUSY, gpio_request_list_by_name(dev, "test-gpios", + desc_list2, + ARRAY_SIZE(desc_list2), + 0)); + ut_assertok(gpio_free_list(dev, desc_list, 3)); + ut_asserteq(3, gpio_request_list_by_name(dev, "test-gpios", desc_list, + ARRAY_SIZE(desc_list), + GPIOD_IS_OUT | + GPIOD_IS_OUT_ACTIVE)); + ut_asserteq_ptr(gpio_a, desc_list[0].dev); + ut_asserteq(1, desc_list[0].offset); + ut_asserteq_ptr(gpio_a, desc_list[1].dev); + ut_asserteq(4, desc_list[1].offset); + ut_asserteq_ptr(gpio_b, desc_list[2].dev); + ut_asserteq(5, desc_list[2].offset); + ut_asserteq(1, dm_gpio_get_value(desc_list)); + ut_assertok(gpio_free_list(dev, desc_list, 3)); + + ut_asserteq(6, gpio_request_list_by_name(dev, "test2-gpios", desc_list, + ARRAY_SIZE(desc_list), 0)); + /* This was set to output previously, so still will be */ + ut_asserteq(GPIOF_OUTPUT, gpio_get_function(gpio_a, 1, NULL)); + + /* Active low should invert the input value */ + ut_asserteq(GPIOF_INPUT, gpio_get_function(gpio_b, 6, NULL)); + ut_asserteq(1, dm_gpio_get_value(&desc_list[2])); + + ut_asserteq(GPIOF_INPUT, gpio_get_function(gpio_b, 7, NULL)); + ut_asserteq(GPIOF_OUTPUT, gpio_get_function(gpio_b, 8, NULL)); + ut_asserteq(0, dm_gpio_get_value(&desc_list[4])); + ut_asserteq(GPIOF_OUTPUT, gpio_get_function(gpio_b, 9, NULL)); + ut_asserteq(1, dm_gpio_get_value(&desc_list[5])); + + + return 0; +} +DM_TEST(dm_test_gpio_phandles, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); diff --git a/test/dm/test.dts b/test/dm/test.dts index fb0272a59c..33f2c00747 100644 --- a/test/dm/test.dts +++ b/test/dm/test.dts @@ -22,6 +22,11 @@ ping-expect = <0>; ping-add = <0>; u-boot,dm-pre-reloc; + test-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 5 0 3 2 1>, + <0>, <&gpio_a 12>; + test2-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 6 1 3 2 1>, + <&gpio_b 7 2 3 2 1>, <&gpio_b 8 4 3 2 1>, + <&gpio_b 9 0xc 3 2 1>; }; junk { @@ -83,12 +88,16 @@ gpio_a: base-gpios { compatible = "sandbox,gpio"; + gpio-controller; + #gpio-cells = <1>; gpio-bank-name = "a"; num-gpios = <20>; }; - extra-gpios { + gpio_b: extra-gpios { compatible = "sandbox,gpio"; + gpio-controller; + #gpio-cells = <5>; gpio-bank-name = "b"; num-gpios = <10>; };