From: Luka Perkov Date: Wed, 16 Oct 2013 03:25:55 +0000 (+0000) Subject: imx6: dts: update ventana dts X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=365ed4d22f8353db53c18aba7f37fea7871de2b4;p=openwrt%2Fstaging%2Fansuel.git imx6: dts: update ventana dts - fix spi chipselect for GW5400-A - fix audmux pinctrl for GW54xx - remove unused alias nodes - remove unused regulator nodes (will be adding pmic nodes next) - remove duplicate eeprom entries - add regulator definitions - fix sgtl5000 regulator reference - add egalax touchscreen controller interrupt - fix gw5400-a audmux pinctrl - fix usb ehci alias Signed-off-by: Tim Harvey SVN-Revision: 38424 --- diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts index 2f9215028a..e4c6df6585 100644 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts @@ -23,30 +23,15 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; - ipu0 = &ipu1; led0 = &led0; led1 = &led1; nand = &gpmi; - pwm0 = &pwm1; - pwm1 = &pwm2; - pwm2 = &pwm3; - pwm3 = &pwm4; - spi0 = &ecspi1; - spi1 = &ecspi2; - spi2 = &ecspi3; - spi3 = &ecspi4; - ssi0 = &ssi1; - ssi1 = &ssi2; - usb0 = &usbh3; + usb0 = &usbh1; usb1 = &usbotg; - usdhc0 = &usdhc1; - usdhc1 = &usdhc2; - usdhc2 = &usdhc3; - usdhc3 = &usdhc4; }; memory { - reg = <0x10000000 0x40000000>; + reg = <0x10000000 0x20000000>; }; leds { @@ -69,14 +54,6 @@ regulators { compatible = "simple-bus"; - reg_2p5v: 2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - reg_3p3v: 3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -85,6 +62,14 @@ regulator-always-on; }; + reg_5p0v: 5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + reg_usb_otg_vbus: usb_otg_vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; @@ -111,16 +96,10 @@ }; &i2c1 { - status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_1>; - - eeprom: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; + status = "okay"; eeprom1: eeprom@50 { compatible = "atmel,24c02"; @@ -146,11 +125,6 @@ pagesize = <16>; }; - rtc: ds1672@68 { - compatible = "dallas,ds1672"; - reg = <0x68>; - }; - gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; @@ -162,20 +136,72 @@ compatible = "gw,gsp"; reg = <0x29>; }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; }; &i2c2 { - status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2_2>; + status = "okay"; + + pmic: ltc3676@3c { + compatible = "ltc,ltc3676"; + reg = <0x3c>; + + regulators { + sw1_reg: ltc3676__sw1 { + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1175000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: ltc3676__sw2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: ltc3676__sw3 { + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1175000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: ltc3676__sw4 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ltc3676__ldo2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ltc3676__ldo4 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; }; &i2c3 { - status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3_2>; + status = "okay"; videoin: adv7180@20 { compatible = "adi,adv7180"; @@ -190,13 +216,13 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < - MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6DL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */ MX6DL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ MX6DL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ + MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ + MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ + MX6DL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */ + MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ + MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ >; }; }; @@ -231,6 +257,14 @@ status = "okay"; }; +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + status = "okay"; +}; + &usbh1 { status = "okay"; }; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts index a027ed9db7..825d952ba2 100644 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -23,29 +23,15 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; - ipu0 = &ipu1; - ipu1 = &ipu2; led0 = &led0; led1 = &led1; led2 = &led2; - pwm0 = &pwm1; - pwm1 = &pwm2; - pwm2 = &pwm3; - pwm3 = &pwm4; sky2 = ð1; ssi0 = &ssi1; - ssi1 = &ssi2; spi0 = &ecspi1; - spi1 = &ecspi2; - spi2 = &ecspi3; - spi3 = &ecspi4; - spi4 = &ecspi5; - usb0 = &usbh3; + usb0 = &usbh1; usb1 = &usbotg; - usdhc0 = &usdhc1; - usdhc1 = &usdhc2; usdhc2 = &usdhc3; - usdhc3 = &usdhc4; }; chosen { @@ -82,11 +68,11 @@ regulators { compatible = "simple-bus"; - reg_2p5v: 2p5v { + reg_1p0v: 1p0v { compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; regulator-always-on; }; @@ -98,6 +84,14 @@ regulator-always-on; }; + reg_usb_h1_vbus: usb_h1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + reg_usb_otg_vbus: usb_otg_vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; @@ -125,7 +119,7 @@ &audmux { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_3>; + pinctrl-0 = <&pinctrl_audmux_1>; status = "okay"; }; @@ -152,16 +146,10 @@ }; &i2c1 { - status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_1>; - - eeprom: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; + status = "okay"; eeprom1: eeprom@50 { compatible = "atmel,24c02"; @@ -187,11 +175,6 @@ pagesize = <16>; }; - rtc: ds1672@68 { - compatible = "dallas,ds1672"; - reg = <0x68>; - }; - gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; @@ -203,17 +186,116 @@ compatible = "gw,gsp"; reg = <0x29>; }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; }; &i2c2 { - status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2_2>; + status = "okay"; - pmic: pfuze@08 { + pmic: pfuze100@08 { compatible = "fsl,pfuze100"; reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; }; pciswitch: pex8609@3f { @@ -228,22 +310,35 @@ }; &i2c3 { - status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3_2>; + status = "okay"; + + accelerometer: mma8450@1c { + compatible = "fsl,mma8450"; + reg = <0x1c>; + }; codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks 169>; - VDDA-supply = <®_2p5v>; + VDDA-supply = <&sw4_reg>; VDDIO-supply = <®_3p3v>; }; - accelerometer: mma8450@1c { - compatible = "fsl,mma8450"; - reg = <0x1c>; + hdmiin: adv7611@4c { + compatible = "adi,adv7611"; + reg = <0x4c>; + }; + + touchscreen: egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio7>; + interrupts = <12 2>; /* gpio7_12 active low */ + wakeup-gpios = <&gpio7 12 0>; }; videoout: adv7393@2a { @@ -255,17 +350,6 @@ compatible = "adi,adv7180"; reg = <0x20>; }; - - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - - touchscreen: egalax_ts@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - wakeup-gpios = <&gpio1 12 0>; - }; }; &iomuxc { @@ -277,14 +361,15 @@ fsl,pins = < MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ + MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ + MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ + MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ + MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ MX6Q_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */ MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - MX6Q_PAD_GPIO_0__CCM_CLKO1 0x80000000 /* AUD4_MCK */ >; }; }; @@ -332,12 +417,21 @@ }; &uart5 { - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5_1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + status = "okay"; }; &usbh1 { + vbus-supply = <®_usb_h1_vbus>; status = "okay"; }; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts index 9c2c4471ac..bc66c3eb4c 100644 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts @@ -24,30 +24,15 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; - ipu0 = &ipu1; - ipu1 = &ipu2; led0 = &led0; led1 = &led1; led2 = &led2; nand = &gpmi; - pwm0 = &pwm1; - pwm1 = &pwm2; - pwm2 = &pwm3; - pwm3 = &pwm4; sky2 = ð1; - spi0 = &ecspi1; - spi1 = &ecspi2; - spi2 = &ecspi3; - spi3 = &ecspi4; - spi4 = &ecspi5; ssi0 = &ssi1; - ssi1 = &ssi2; - usb0 = &usbh3; + usb0 = &usbh1; usb1 = &usbotg; - usdhc0 = &usdhc1; - usdhc1 = &usdhc2; usdhc2 = &usdhc3; - usdhc3 = &usdhc4; }; chosen { @@ -84,11 +69,11 @@ regulators { compatible = "simple-bus"; - reg_2p5v: 2p5v { + reg_1p0v: 1p0v { compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; regulator-always-on; }; @@ -100,6 +85,14 @@ regulator-always-on; }; + reg_usb_h1_vbus: usb_h1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + reg_usb_otg_vbus: usb_otg_vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; @@ -127,7 +120,7 @@ &audmux { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_3>; + pinctrl-0 = <&pinctrl_audmux_1>; status = "okay"; }; @@ -150,16 +143,10 @@ }; &i2c1 { - status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_1>; - - eeprom: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; + status = "okay"; eeprom1: eeprom@50 { compatible = "atmel,24c02"; @@ -185,11 +172,6 @@ pagesize = <16>; }; - rtc: ds1672@68 { - compatible = "dallas,ds1672"; - reg = <0x68>; - }; - gpio: pca9555@23 { compatible = "nxp,pca9555"; reg = <0x23>; @@ -201,17 +183,116 @@ compatible = "gw,gsp"; reg = <0x29>; }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; }; &i2c2 { - status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2_2>; + status = "okay"; - pmic: pfuze@08 { + pmic: pfuze100@08 { compatible = "fsl,pfuze100"; reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; }; pciswitch: pex8609@3f { @@ -226,22 +307,35 @@ }; &i2c3 { - status = "okay"; clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3_2>; + status = "okay"; + + accelerometer: fxos8700@1e { + compatible = "fsl,fxos8700"; + reg = <0x1e>; + }; codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks 169>; - VDDA-supply = <®_2p5v>; + VDDA-supply = <&sw4_reg>; VDDIO-supply = <®_3p3v>; }; - accelerometer: mma8450@1c { - compatible = "fsl,mma8450"; - reg = <0x1c>; + hdmiin: adv7611@4c { + compatible = "adi,adv7611"; + reg = <0x4c>; + }; + + touchscreen: egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio7>; + interrupts = <12 2>; /* gpio7_12 active low */ + wakeup-gpios = <&gpio7 12 0>; }; videoout: adv7393@2a { @@ -253,17 +347,6 @@ compatible = "adi,adv7180"; reg = <0x20>; }; - - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - - touchscreen: egalax_ts@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - wakeup-gpios = <&gpio1 12 0>; - }; }; &iomuxc { @@ -275,20 +358,28 @@ fsl,pins = < MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ + MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ + MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ + MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ + MX6Q_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ + MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6Q_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ >; }; }; }; +&ldb { + status = "okay"; + lvds-channel@0 { + crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; + }; +}; + &pcie { reset-gpio = <&gpio1 29 0>; status = "okay"; @@ -328,9 +419,9 @@ }; &uart5 { - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5_1>; + status = "okay"; }; &usbotg { @@ -342,6 +433,7 @@ }; &usbh1 { + vbus-supply = <®_usb_h1_vbus>; status = "okay"; };