From: Sebastian Schaper Date: Wed, 3 Jun 2020 19:15:09 +0000 (+0200) Subject: ath79: add support for D-Link DAP-1330/DAP-1365 A1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=361c670a468cac8def368ed95487c72cfdb4a3fa;p=openwrt%2Fstaging%2Fthess.git ath79: add support for D-Link DAP-1330/DAP-1365 A1 Port device support for DAP-1330 from the ar71xx target to ath79. Additionally, images are generated for the European through-socket case variant DAP-1365. Both devices run the same vendor firmware, the only difference being the DAP_SIGNATURE field in the factory header. The vendor's Web UI will display a model string stored in the flash. Specifications: * QCA9533, 8 MiB Flash, 64 MiB RAM * One Ethernet Port (10/100) * Wall-plug style case (DAP-1365 with additional socket) * LED bargraph RSSI indicator Installation: * Web UI: http://192.168.0.50 (or different address obtained via DHCP) There is no password set by default * Recovery Web UI: Keep reset button pressed during power-on until LED starts flashing red, upgrade via http://192.168.0.50 * Some modern browsers may have problems flashing via the Web UI, if this occurs consider booting to recovery mode and flashing via: curl -F \ files=@openwrt-ath79-generic-dlink_dap-1330-a1-squashfs-factory.bin \ http://192.168.0.50/cgi/index The device will use the same MAC address for both wired and wireless interfaces, however it is stored at two different locations in the flash. Signed-off-by: Sebastian Schaper --- diff --git a/target/linux/ath79/dts/qca9533_dlink_dap-1330-a1.dts b/target/linux/ath79/dts/qca9533_dlink_dap-1330-a1.dts new file mode 100644 index 0000000000..3ec36ad9dd --- /dev/null +++ b/target/linux/ath79/dts/qca9533_dlink_dap-1330-a1.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9533_dlink_dap-13xx.dtsi" + +/ { + compatible = "dlink,dap-1330-a1", "qca,qca9533"; + model = "D-Link DAP-1330 A1"; +}; diff --git a/target/linux/ath79/dts/qca9533_dlink_dap-1365-a1.dts b/target/linux/ath79/dts/qca9533_dlink_dap-1365-a1.dts new file mode 100644 index 0000000000..3b153740c6 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_dlink_dap-1365-a1.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9533_dlink_dap-13xx.dtsi" + +/ { + compatible = "dlink,dap-1365-a1", "qca,qca9533"; + model = "D-Link DAP-1365 A1"; +}; diff --git a/target/linux/ath79/dts/qca9533_dlink_dap-13xx.dtsi b/target/linux/ath79/dts/qca9533_dlink_dap-13xx.dtsi new file mode 100644 index 0000000000..8823312d08 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_dlink_dap-13xx.dtsi @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include + +#include "qca953x.dtsi" + +/ { + aliases { + led-boot = &led_power; + led-failsafe = &led_status; + led-running = &led_power; + led-upgrade = &led_status; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + linux,code = ; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "d-link:green:power"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + led_status: status { + label = "d-link:red:status"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + rssilow { + label = "d-link:red:rssilow"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + rssimediumlow { + label = "d-link:green:rssimediumlow"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + rssimediumhigh { + label = "d-link:green:rssimediumhigh"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + rssihigh { + label = "d-link:green:rssihigh"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi { + status = "okay"; + + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x10000>; + read-only; + }; + + art: partition@10000 { + label = "art"; + reg = <0x10000 0x10000>; + read-only; + }; + + partition@20000 { + label = "mp"; + reg = <0x20000 0x10000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "firmware"; + reg = <0x40000 0x7c0000>; + compatible = "denx,uimage"; + }; + }; + }; +}; + +&uart { + status = "okay"; +}; + +ð0 { + status = "okay"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index f3e3b758b5..f3f8742560 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -132,6 +132,14 @@ compex,wpj531-16m) devolo,magic-2-wifi) ucidef_set_led_netdev "plcw" "dLAN" "devolo:white:dlan" "eth0.1" "rx" ;; +dlink,dap-1330-a1|\ +dlink,dap-1365-a1) + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "d-link:red:rssilow" "wlan0" "1" "25" + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "d-link:green:rssimediumlow" "wlan0" "1" "100" + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "d-link:green:rssimediumhigh" "wlan0" "51" "100" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "d-link:green:rssihigh" "wlan0" "76" "100" + ;; dlink,dir-859-a1) ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20" ;; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index eb43788fce..f93d914374 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -23,6 +23,8 @@ ath79_setup_interfaces() devolo,dvl1750c|\ devolo,dvl1750i|\ devolo,dvl1750x|\ + dlink,dap-1330-a1|\ + dlink,dap-1365-a1|\ dlink,dir-505|\ engenius,ecb1750|\ enterasys,ws-ap3705i|\ @@ -386,13 +388,15 @@ ath79_setup_macs() devolo,magic-2-wifi) label_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" 3) ;; - dlink,dap-2695-a1) - label_mac=$(mtd_get_mac_ascii bdcfg "wlanmac") - ;; + dlink,dap-1330-a1|\ + dlink,dap-1365-a1|\ dlink,dch-g020-a1) lan_mac=$(mtd_get_mac_text "mp" 0x1) label_mac=$lan_mac ;; + dlink,dap-2695-a1) + label_mac=$(mtd_get_mac_ascii bdcfg "wlanmac") + ;; dlink,dir-825-b1) lan_mac=$(mtd_get_mac_text "caldata" 0xffa0) wan_mac=$(mtd_get_mac_text "caldata" 0xffb4) diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index cf582b8465..8ea23a8ac6 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -17,6 +17,8 @@ case "$board" in adtran,bsap1840) macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress ;; + dlink,dap-1330-a1|\ + dlink,dap-1365-a1|\ dlink,dch-g020-a1) mtd_get_mac_text "mp" 0x13 > /sys${DEVPATH}/macaddress ;; diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration index 23a9c8282f..0f68209c9b 100644 --- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration +++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration @@ -8,6 +8,13 @@ case "$board" in arduino,yun) migrate_leds "arduino:=yun:" ;; +dlink,dap-1330-a1) + migrate_leds ":red:power=:red:status" \ + ":red:wifi=:red:rssilow" \ + ":green:wifi=:green:rssimediumlow" \ + ":green:signal1=:green:rssimediumhigh" \ + ":green:signal2=:green:rssihigh" + ;; engenius,epg5000) migrate_leds ":wlan-2g=:wlan2g" ":wlan-5g=:wlan5g" ;; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 46a8705b85..8dc16983e1 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -565,6 +565,33 @@ define Device/devolo_magic-2-wifi endef TARGET_DEVICES += devolo_magic-2-wifi +define Device/dlink_dap-13xx + SOC := qca9533 + DEVICE_VENDOR := D-Link + DEVICE_PACKAGES += rssileds + IMAGE_SIZE := 7936k + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | check-size | mkdapimg2 0xE0000 +endef + +define Device/dlink_dap-1330-a1 + $(Device/dlink_dap-13xx) + DEVICE_MODEL := DAP-1330 + DEVICE_VARIANT := A1 + DAP_SIGNATURE := HONEYBEE-FIRMWARE-DAP-1330 + SUPPORTED_DEVICES += dap-1330-a1 +endef +TARGET_DEVICES += dlink_dap-1330-a1 + +define Device/dlink_dap-1365-a1 + $(Device/dlink_dap-13xx) + DEVICE_MODEL := DAP-1365 + DEVICE_VARIANT := A1 + DAP_SIGNATURE := HONEYBEE-FIRMWARE-DAP-1365 +endef +TARGET_DEVICES += dlink_dap-1365-a1 + define Device/dlink_dap-2695-a1 SOC := qca9558 DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct