From: Archit Taneja Date: Wed, 17 Jan 2018 09:34:48 +0000 (+0530) Subject: dt-bindings: display: msm/dsi: Add updates for SDM845 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=35f135a3b1cfeee4ef2bd92755debd0bcf60cb9f;p=openwrt%2Fstaging%2Fblogic.git dt-bindings: display: msm/dsi: Add updates for SDM845 SDM845 uses a newer revision (v2.0+) of the 6G DSI controller. This revision has another clock input at the block boundary called the byte interface clock. Specify this new clock in the binding. A 10nm DSI PHY is used along with the controller. Add a compatible string for it and specify its base address/regulator supply needs. Cc: Rob Herring Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja Reviewed-by: Rob Herring Signed-off-by: Rob Clark --- diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index 26a1796b7145..518e9cdf0d4b 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -20,6 +20,8 @@ Required properties: * "core" For DSIv2, we need an additional clock: * "src" + For DSI6G v2.0 onwards, we need also need the clock: + * "byte_intf" - assigned-clocks: Parents of "byte" and "pixel" for the given platform. - assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block. See [1] for details on clock bindings. @@ -87,6 +89,7 @@ Required properties: * "qcom,dsi-phy-20nm" * "qcom,dsi-phy-28nm-8960" * "qcom,dsi-phy-14nm" + * "qcom,dsi-phy-10nm" - reg: Physical base address and length of the registers of PLL, PHY. Some revisions require the PHY regulator base address, whereas others require the PHY lane base address. See below for each PHY revision. @@ -95,7 +98,7 @@ Required properties: * "dsi_pll" * "dsi_phy" * "dsi_phy_regulator" - For DSI 14nm PHY: + For DSI 14nm and 10nm PHYs: * "dsi_pll" * "dsi_phy" * "dsi_phy_lane" @@ -112,6 +115,8 @@ Required properties: - vcca-supply: phandle to vcca regulator device node For 14nm PHY: - vcca-supply: phandle to vcca regulator device node + For 10nm PHY: +- vdds-supply: phandle to vdds regulator device node Optional properties: - qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY