From: Marek Behún Date: Mon, 22 Jul 2024 10:58:20 +0000 (+0200) Subject: mvebu: 6.6: Backport Turris Omnia MCU patches from 6.11 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=35aa38540a804c3d735bb2661ac670d7afbfe25a;p=openwrt%2Fstaging%2Fxback.git mvebu: 6.6: Backport Turris Omnia MCU patches from 6.11 This backports patches dt-bindings: firmware: add cznic,turris-omnia-mcu binding platform: cznic: Add preliminary support for Turris Omnia MCU platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup platform: cznic: turris-omnia-mcu: Add support for MCU watchdog platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG ARM: dts: turris-omnia: Add MCU system-controller node ARM: dts: turris-omnia: Add GPIO key node for front button platform: cznic: turris-omnia-mcu: Depend on OF platform: cznic: turris-omnia-mcu: Depend on WATCHDOG platform: cznic: turris-omnia-mcu: fix Kconfig dependencies that will be released in 6.11 into mvebu/patches-6.6. Signed-off-by: Marek Behún Link: https://github.com/openwrt/openwrt/pull/13799 Signed-off-by: Robert Marko --- diff --git a/target/linux/generic/config-6.6 b/target/linux/generic/config-6.6 index 20fe98099f..076a9f9691 100644 --- a/target/linux/generic/config-6.6 +++ b/target/linux/generic/config-6.6 @@ -875,6 +875,7 @@ CONFIG_CFG80211_HEADERS=y # CONFIG_CHELSIO_T4 is not set # CONFIG_CHELSIO_T4VF is not set # CONFIG_CHROME_PLATFORMS is not set +# CONFIG_CZNIC_PLATFORMS is not set # CONFIG_CHR_DEV_SCH is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_ST is not set diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-01-dt-bindings-firmware-add-cznic-turris-omnia-mcu-bind.patch b/target/linux/mvebu/patches-6.6/820-v6.11-01-dt-bindings-firmware-add-cznic-turris-omnia-mcu-bind.patch new file mode 100644 index 0000000000..4d6d8e82c2 --- /dev/null +++ b/target/linux/mvebu/patches-6.6/820-v6.11-01-dt-bindings-firmware-add-cznic-turris-omnia-mcu-bind.patch @@ -0,0 +1,125 @@ +From cdfed4d05780450817ef96567e2cd8d355ca9e70 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 1 Jul 2024 13:30:03 +0200 +Subject: [PATCH 01/11] dt-bindings: firmware: add cznic,turris-omnia-mcu + binding +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add binding for cznic,turris-omnia-mcu, the device-tree node +representing the system-controller features provided by the MCU on the +Turris Omnia router. + +Signed-off-by: Marek Behún +Reviewed-by: Krzysztof Kozlowski +Reviewed-by: Conor Dooley +Reviewed-by: Andy Shevchenko +Acked-by: Bartosz Golaszewski +Link: https://lore.kernel.org/r/20240701113010.16447-2-kabel@kernel.org +Signed-off-by: Arnd Bergmann +--- + .../firmware/cznic,turris-omnia-mcu.yaml | 86 +++++++++++++++++++ + MAINTAINERS | 1 + + 2 files changed, 87 insertions(+) + create mode 100644 Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml +@@ -0,0 +1,86 @@ ++# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/firmware/cznic,turris-omnia-mcu.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: CZ.NIC's Turris Omnia MCU ++ ++maintainers: ++ - Marek Behún ++ ++description: ++ The MCU on Turris Omnia acts as a system controller providing additional ++ GPIOs, interrupts, watchdog, system power off and wakeup configuration. ++ ++properties: ++ compatible: ++ const: cznic,turris-omnia-mcu ++ ++ reg: ++ description: MCU I2C slave address ++ maxItems: 1 ++ ++ interrupts: ++ maxItems: 1 ++ ++ interrupt-controller: true ++ ++ '#interrupt-cells': ++ const: 2 ++ description: | ++ The first cell specifies the interrupt number (0 to 63), the second cell ++ specifies interrupt type (which can be one of IRQ_TYPE_EDGE_RISING, ++ IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH). ++ The interrupt numbers correspond sequentially to GPIO numbers, taking the ++ GPIO banks into account: ++ IRQ number GPIO bank GPIO pin within bank ++ 0 - 15 0 0 - 15 ++ 16 - 47 1 0 - 31 ++ 48 - 63 2 0 - 15 ++ There are several exceptions: ++ IRQ number meaning ++ 11 LED panel brightness changed by button press ++ 13 TRNG entropy ready ++ 14 ECDSA message signature computation done ++ ++ gpio-controller: true ++ ++ '#gpio-cells': ++ const: 3 ++ description: ++ The first cell is bank number (0, 1 or 2), the second cell is pin number ++ within the bank (0 to 15 for banks 0 and 2, 0 to 31 for bank 1), and the ++ third cell specifies consumer flags. ++ ++required: ++ - compatible ++ - reg ++ - interrupts ++ - interrupt-controller ++ - gpio-controller ++ ++additionalProperties: false ++ ++examples: ++ - | ++ #include ++ ++ i2c { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ system-controller@2a { ++ compatible = "cznic,turris-omnia-mcu"; ++ reg = <0x2a>; ++ ++ interrupt-parent = <&gpio1>; ++ interrupts = <11 IRQ_TYPE_NONE>; ++ ++ gpio-controller; ++ #gpio-cells = <3>; ++ ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ }; +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -2104,6 +2104,7 @@ F: Documentation/ABI/testing/sysfs-bus-m + F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm + F: Documentation/devicetree/bindings/bus/moxtet.txt + F: Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt ++F: Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml + F: Documentation/devicetree/bindings/gpio/gpio-moxtet.txt + F: Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml + F: Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-02-platform-cznic-Add-preliminary-support-for-Turris-Om.patch b/target/linux/mvebu/patches-6.6/820-v6.11-02-platform-cznic-Add-preliminary-support-for-Turris-Om.patch new file mode 100644 index 0000000000..72bd18d144 --- /dev/null +++ b/target/linux/mvebu/patches-6.6/820-v6.11-02-platform-cznic-Add-preliminary-support-for-Turris-Om.patch @@ -0,0 +1,922 @@ +From 4a63f684c8badfc43f384df2291ed2566909a3bc Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 1 Jul 2024 13:30:04 +0200 +Subject: [PATCH 02/11] platform: cznic: Add preliminary support for Turris + Omnia MCU +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add the basic skeleton for a new platform driver for the microcontroller +found on the Turris Omnia board. + +Signed-off-by: Marek Behún +Reviewed-by: Andy Shevchenko +Acked-by: Bartosz Golaszewski +Link: https://lore.kernel.org/r/20240701113010.16447-3-kabel@kernel.org +Signed-off-by: Arnd Bergmann +--- + .../sysfs-bus-i2c-devices-turris-omnia-mcu | 81 ++++ + MAINTAINERS | 3 + + drivers/platform/Kconfig | 2 + + drivers/platform/Makefile | 1 + + drivers/platform/cznic/Kconfig | 25 ++ + drivers/platform/cznic/Makefile | 4 + + .../platform/cznic/turris-omnia-mcu-base.c | 393 ++++++++++++++++++ + drivers/platform/cznic/turris-omnia-mcu.h | 74 ++++ + include/linux/turris-omnia-mcu-interface.h | 249 +++++++++++ + 9 files changed, 832 insertions(+) + create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu + create mode 100644 drivers/platform/cznic/Kconfig + create mode 100644 drivers/platform/cznic/Makefile + create mode 100644 drivers/platform/cznic/turris-omnia-mcu-base.c + create mode 100644 drivers/platform/cznic/turris-omnia-mcu.h + create mode 100644 include/linux/turris-omnia-mcu-interface.h + +--- /dev/null ++++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu +@@ -0,0 +1,81 @@ ++What: /sys/bus/i2c/devices//board_revision ++Date: September 2024 ++KernelVersion: 6.11 ++Contact: Marek Behún ++Description: (RO) Contains board revision number. ++ ++ Only available if board information is burned in the MCU (older ++ revisions have board information burned in the ATSHA204-A chip). ++ ++ Format: %u. ++ ++What: /sys/bus/i2c/devices//first_mac_address ++Date: September 2024 ++KernelVersion: 6.11 ++Contact: Marek Behún ++Description: (RO) Contains device first MAC address. Each Turris Omnia is ++ allocated 3 MAC addresses. The two additional addresses are ++ computed from the first one by incrementing it. ++ ++ Only available if board information is burned in the MCU (older ++ revisions have board information burned in the ATSHA204-A chip). ++ ++ Format: %pM. ++ ++What: /sys/bus/i2c/devices//fw_features ++Date: September 2024 ++KernelVersion: 6.11 ++Contact: Marek Behún ++Description: (RO) Newer versions of the microcontroller firmware report the ++ features they support. These can be read from this file. If the ++ MCU firmware is too old, this file reads 0x0. ++ ++ Format: 0x%x. ++ ++What: /sys/bus/i2c/devices//fw_version_hash_application ++Date: September 2024 ++KernelVersion: 6.11 ++Contact: Marek Behún ++Description: (RO) Contains the version hash (commit hash) of the application ++ part of the microcontroller firmware. ++ ++ Format: %s. ++ ++What: /sys/bus/i2c/devices//fw_version_hash_bootloader ++Date: September 2024 ++KernelVersion: 6.11 ++Contact: Marek Behún ++Description: (RO) Contains the version hash (commit hash) of the bootloader ++ part of the microcontroller firmware. ++ ++ Format: %s. ++ ++What: /sys/bus/i2c/devices//mcu_type ++Date: September 2024 ++KernelVersion: 6.11 ++Contact: Marek Behún ++Description: (RO) Contains the microcontroller type (STM32, GD32, MKL). ++ ++ Format: %s. ++ ++What: /sys/bus/i2c/devices//reset_selector ++Date: September 2024 ++KernelVersion: 6.11 ++Contact: Marek Behún ++Description: (RO) Contains the selected factory reset level, determined by ++ how long the rear reset button was held by the user during board ++ reset. ++ ++ Format: %i. ++ ++What: /sys/bus/i2c/devices//serial_number ++Date: September 2024 ++KernelVersion: 6.11 ++Contact: Marek Behún ++Description: (RO) Contains the 64-bit board serial number in hexadecimal ++ format. ++ ++ Only available if board information is burned in the MCU (older ++ revisions have board information burned in the ATSHA204-A chip). ++ ++ Format: %016X. +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -2100,6 +2100,7 @@ M: Marek Behún + S: Maintained + W: https://www.turris.cz/ + F: Documentation/ABI/testing/debugfs-moxtet ++F: Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu + F: Documentation/ABI/testing/sysfs-bus-moxtet-devices + F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm + F: Documentation/devicetree/bindings/bus/moxtet.txt +@@ -2113,10 +2114,12 @@ F: drivers/firmware/turris-mox-rwtm.c + F: drivers/gpio/gpio-moxtet.c + F: drivers/leds/leds-turris-omnia.c + F: drivers/mailbox/armada-37xx-rwtm-mailbox.c ++F: drivers/platform/cznic/ + F: drivers/watchdog/armada_37xx_wdt.c + F: include/dt-bindings/bus/moxtet.h + F: include/linux/armada-37xx-rwtm-mailbox.h + F: include/linux/moxtet.h ++F: include/linux/turris-omnia-mcu-interface.h + + ARM/FARADAY FA526 PORT + M: Hans Ulli Kroll +--- a/drivers/platform/Kconfig ++++ b/drivers/platform/Kconfig +@@ -7,6 +7,8 @@ source "drivers/platform/goldfish/Kconfi + + source "drivers/platform/chrome/Kconfig" + ++source "drivers/platform/cznic/Kconfig" ++ + source "drivers/platform/mellanox/Kconfig" + + source "drivers/platform/olpc/Kconfig" +--- a/drivers/platform/Makefile ++++ b/drivers/platform/Makefile +@@ -10,5 +10,6 @@ obj-$(CONFIG_MIPS) += mips/ + obj-$(CONFIG_OLPC_EC) += olpc/ + obj-$(CONFIG_GOLDFISH) += goldfish/ + obj-$(CONFIG_CHROME_PLATFORMS) += chrome/ ++obj-$(CONFIG_CZNIC_PLATFORMS) += cznic/ + obj-$(CONFIG_SURFACE_PLATFORMS) += surface/ + obj-$(CONFIG_MIKROTIK) += mikrotik/ +--- /dev/null ++++ b/drivers/platform/cznic/Kconfig +@@ -0,0 +1,25 @@ ++# SPDX-License-Identifier: GPL-2.0-only ++# ++# For a description of the syntax of this configuration file, ++# see Documentation/kbuild/kconfig-language.rst. ++# ++ ++menuconfig CZNIC_PLATFORMS ++ bool "Platform support for CZ.NIC's Turris hardware" ++ help ++ Say Y here to be able to choose driver support for CZ.NIC's Turris ++ devices. This option alone does not add any kernel code. ++ ++if CZNIC_PLATFORMS ++ ++config TURRIS_OMNIA_MCU ++ tristate "Turris Omnia MCU driver" ++ depends on MACH_ARMADA_38X || COMPILE_TEST ++ depends on I2C ++ help ++ Say Y here to add support for the features implemented by the ++ microcontroller on the CZ.NIC's Turris Omnia SOHO router. ++ To compile this driver as a module, choose M here; the module will be ++ called turris-omnia-mcu. ++ ++endif # CZNIC_PLATFORMS +--- /dev/null ++++ b/drivers/platform/cznic/Makefile +@@ -0,0 +1,4 @@ ++# SPDX-License-Identifier: GPL-2.0-only ++ ++obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o ++turris-omnia-mcu-y := turris-omnia-mcu-base.o +--- /dev/null ++++ b/drivers/platform/cznic/turris-omnia-mcu-base.c +@@ -0,0 +1,393 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * CZ.NIC's Turris Omnia MCU driver ++ * ++ * 2024 by Marek Behún ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include "turris-omnia-mcu.h" ++ ++#define OMNIA_FW_VERSION_LEN 20 ++#define OMNIA_FW_VERSION_HEX_LEN (2 * OMNIA_FW_VERSION_LEN + 1) ++#define OMNIA_BOARD_INFO_LEN 16 ++ ++int omnia_cmd_write_read(const struct i2c_client *client, ++ void *cmd, unsigned int cmd_len, ++ void *reply, unsigned int reply_len) ++{ ++ struct i2c_msg msgs[2]; ++ int ret, num; ++ ++ msgs[0].addr = client->addr; ++ msgs[0].flags = 0; ++ msgs[0].len = cmd_len; ++ msgs[0].buf = cmd; ++ num = 1; ++ ++ if (reply_len) { ++ msgs[1].addr = client->addr; ++ msgs[1].flags = I2C_M_RD; ++ msgs[1].len = reply_len; ++ msgs[1].buf = reply; ++ num++; ++ } ++ ++ ret = i2c_transfer(client->adapter, msgs, num); ++ if (ret < 0) ++ return ret; ++ if (ret != num) ++ return -EIO; ++ ++ return 0; ++} ++ ++static int omnia_get_version_hash(struct omnia_mcu *mcu, bool bootloader, ++ char version[static OMNIA_FW_VERSION_HEX_LEN]) ++{ ++ u8 reply[OMNIA_FW_VERSION_LEN]; ++ char *p; ++ int err; ++ ++ err = omnia_cmd_read(mcu->client, ++ bootloader ? OMNIA_CMD_GET_FW_VERSION_BOOT ++ : OMNIA_CMD_GET_FW_VERSION_APP, ++ reply, sizeof(reply)); ++ if (err) ++ return err; ++ ++ p = bin2hex(version, reply, OMNIA_FW_VERSION_LEN); ++ *p = '\0'; ++ ++ return 0; ++} ++ ++static ssize_t fw_version_hash_show(struct device *dev, char *buf, ++ bool bootloader) ++{ ++ struct omnia_mcu *mcu = dev_get_drvdata(dev); ++ char version[OMNIA_FW_VERSION_HEX_LEN]; ++ int err; ++ ++ err = omnia_get_version_hash(mcu, bootloader, version); ++ if (err) ++ return err; ++ ++ return sysfs_emit(buf, "%s\n", version); ++} ++ ++static ssize_t fw_version_hash_application_show(struct device *dev, ++ struct device_attribute *a, ++ char *buf) ++{ ++ return fw_version_hash_show(dev, buf, false); ++} ++static DEVICE_ATTR_RO(fw_version_hash_application); ++ ++static ssize_t fw_version_hash_bootloader_show(struct device *dev, ++ struct device_attribute *a, ++ char *buf) ++{ ++ return fw_version_hash_show(dev, buf, true); ++} ++static DEVICE_ATTR_RO(fw_version_hash_bootloader); ++ ++static ssize_t fw_features_show(struct device *dev, struct device_attribute *a, ++ char *buf) ++{ ++ struct omnia_mcu *mcu = dev_get_drvdata(dev); ++ ++ return sysfs_emit(buf, "0x%x\n", mcu->features); ++} ++static DEVICE_ATTR_RO(fw_features); ++ ++static ssize_t mcu_type_show(struct device *dev, struct device_attribute *a, ++ char *buf) ++{ ++ struct omnia_mcu *mcu = dev_get_drvdata(dev); ++ ++ return sysfs_emit(buf, "%s\n", mcu->type); ++} ++static DEVICE_ATTR_RO(mcu_type); ++ ++static ssize_t reset_selector_show(struct device *dev, ++ struct device_attribute *a, char *buf) ++{ ++ u8 reply; ++ int err; ++ ++ err = omnia_cmd_read_u8(to_i2c_client(dev), OMNIA_CMD_GET_RESET, ++ &reply); ++ if (err) ++ return err; ++ ++ return sysfs_emit(buf, "%d\n", reply); ++} ++static DEVICE_ATTR_RO(reset_selector); ++ ++static ssize_t serial_number_show(struct device *dev, ++ struct device_attribute *a, char *buf) ++{ ++ struct omnia_mcu *mcu = dev_get_drvdata(dev); ++ ++ return sysfs_emit(buf, "%016llX\n", mcu->board_serial_number); ++} ++static DEVICE_ATTR_RO(serial_number); ++ ++static ssize_t first_mac_address_show(struct device *dev, ++ struct device_attribute *a, char *buf) ++{ ++ struct omnia_mcu *mcu = dev_get_drvdata(dev); ++ ++ return sysfs_emit(buf, "%pM\n", mcu->board_first_mac); ++} ++static DEVICE_ATTR_RO(first_mac_address); ++ ++static ssize_t board_revision_show(struct device *dev, ++ struct device_attribute *a, char *buf) ++{ ++ struct omnia_mcu *mcu = dev_get_drvdata(dev); ++ ++ return sysfs_emit(buf, "%u\n", mcu->board_revision); ++} ++static DEVICE_ATTR_RO(board_revision); ++ ++static struct attribute *omnia_mcu_base_attrs[] = { ++ &dev_attr_fw_version_hash_application.attr, ++ &dev_attr_fw_version_hash_bootloader.attr, ++ &dev_attr_fw_features.attr, ++ &dev_attr_mcu_type.attr, ++ &dev_attr_reset_selector.attr, ++ &dev_attr_serial_number.attr, ++ &dev_attr_first_mac_address.attr, ++ &dev_attr_board_revision.attr, ++ NULL ++}; ++ ++static umode_t omnia_mcu_base_attrs_visible(struct kobject *kobj, ++ struct attribute *a, int n) ++{ ++ struct device *dev = kobj_to_dev(kobj); ++ struct omnia_mcu *mcu = dev_get_drvdata(dev); ++ ++ if ((a == &dev_attr_serial_number.attr || ++ a == &dev_attr_first_mac_address.attr || ++ a == &dev_attr_board_revision.attr) && ++ !(mcu->features & OMNIA_FEAT_BOARD_INFO)) ++ return 0; ++ ++ return a->mode; ++} ++ ++static const struct attribute_group omnia_mcu_base_group = { ++ .attrs = omnia_mcu_base_attrs, ++ .is_visible = omnia_mcu_base_attrs_visible, ++}; ++ ++static const struct attribute_group *omnia_mcu_groups[] = { ++ &omnia_mcu_base_group, ++ NULL ++}; ++ ++static void omnia_mcu_print_version_hash(struct omnia_mcu *mcu, bool bootloader) ++{ ++ const char *type = bootloader ? "bootloader" : "application"; ++ struct device *dev = &mcu->client->dev; ++ char version[OMNIA_FW_VERSION_HEX_LEN]; ++ int err; ++ ++ err = omnia_get_version_hash(mcu, bootloader, version); ++ if (err) { ++ dev_err(dev, "Cannot read MCU %s firmware version: %d\n", ++ type, err); ++ return; ++ } ++ ++ dev_info(dev, "MCU %s firmware version hash: %s\n", type, version); ++} ++ ++static const char *omnia_status_to_mcu_type(u16 status) ++{ ++ switch (status & OMNIA_STS_MCU_TYPE_MASK) { ++ case OMNIA_STS_MCU_TYPE_STM32: ++ return "STM32"; ++ case OMNIA_STS_MCU_TYPE_GD32: ++ return "GD32"; ++ case OMNIA_STS_MCU_TYPE_MKL: ++ return "MKL"; ++ default: ++ return "unknown"; ++ } ++} ++ ++static void omnia_info_missing_feature(struct device *dev, const char *feature) ++{ ++ dev_info(dev, ++ "Your board's MCU firmware does not support the %s feature.\n", ++ feature); ++} ++ ++static int omnia_mcu_read_features(struct omnia_mcu *mcu) ++{ ++ static const struct { ++ u16 mask; ++ const char *name; ++ } features[] = { ++#define _DEF_FEAT(_n, _m) { OMNIA_FEAT_ ## _n, _m } ++ _DEF_FEAT(EXT_CMDS, "extended control and status"), ++ _DEF_FEAT(WDT_PING, "watchdog pinging"), ++ _DEF_FEAT(LED_STATE_EXT_MASK, "peripheral LED pins reading"), ++ _DEF_FEAT(NEW_INT_API, "new interrupt API"), ++ _DEF_FEAT(POWEROFF_WAKEUP, "poweroff and wakeup"), ++ _DEF_FEAT(TRNG, "true random number generator"), ++#undef _DEF_FEAT ++ }; ++ struct i2c_client *client = mcu->client; ++ struct device *dev = &client->dev; ++ bool suggest_fw_upgrade = false; ++ u16 status; ++ int err; ++ ++ /* status word holds MCU type, which we need below */ ++ err = omnia_cmd_read_u16(client, OMNIA_CMD_GET_STATUS_WORD, &status); ++ if (err) ++ return err; ++ ++ /* ++ * Check whether MCU firmware supports the OMNIA_CMD_GET_FEATURES ++ * command. ++ */ ++ if (status & OMNIA_STS_FEATURES_SUPPORTED) { ++ /* try read 32-bit features */ ++ err = omnia_cmd_read_u32(client, OMNIA_CMD_GET_FEATURES, ++ &mcu->features); ++ if (err) { ++ /* try read 16-bit features */ ++ u16 features16; ++ ++ err = omnia_cmd_read_u16(client, OMNIA_CMD_GET_FEATURES, ++ &features16); ++ if (err) ++ return err; ++ ++ mcu->features = features16; ++ } else { ++ if (mcu->features & OMNIA_FEAT_FROM_BIT_16_INVALID) ++ mcu->features &= GENMASK(15, 0); ++ } ++ } else { ++ dev_info(dev, ++ "Your board's MCU firmware does not support feature reading.\n"); ++ suggest_fw_upgrade = true; ++ } ++ ++ mcu->type = omnia_status_to_mcu_type(status); ++ dev_info(dev, "MCU type %s%s\n", mcu->type, ++ (mcu->features & OMNIA_FEAT_PERIPH_MCU) ? ++ ", with peripheral resets wired" : ""); ++ ++ omnia_mcu_print_version_hash(mcu, true); ++ ++ if (mcu->features & OMNIA_FEAT_BOOTLOADER) ++ dev_warn(dev, ++ "MCU is running bootloader firmware. Was firmware upgrade interrupted?\n"); ++ else ++ omnia_mcu_print_version_hash(mcu, false); ++ ++ for (unsigned int i = 0; i < ARRAY_SIZE(features); i++) { ++ if (mcu->features & features[i].mask) ++ continue; ++ ++ omnia_info_missing_feature(dev, features[i].name); ++ suggest_fw_upgrade = true; ++ } ++ ++ if (suggest_fw_upgrade) ++ dev_info(dev, ++ "Consider upgrading MCU firmware with the omnia-mcutool utility.\n"); ++ ++ return 0; ++} ++ ++static int omnia_mcu_read_board_info(struct omnia_mcu *mcu) ++{ ++ u8 reply[1 + OMNIA_BOARD_INFO_LEN]; ++ int err; ++ ++ err = omnia_cmd_read(mcu->client, OMNIA_CMD_BOARD_INFO_GET, reply, ++ sizeof(reply)); ++ if (err) ++ return err; ++ ++ if (reply[0] != OMNIA_BOARD_INFO_LEN) ++ return -EIO; ++ ++ mcu->board_serial_number = get_unaligned_le64(&reply[1]); ++ ++ /* we can't use ether_addr_copy() because reply is not u16-aligned */ ++ memcpy(mcu->board_first_mac, &reply[9], sizeof(mcu->board_first_mac)); ++ ++ mcu->board_revision = reply[15]; ++ ++ return 0; ++} ++ ++static int omnia_mcu_probe(struct i2c_client *client) ++{ ++ struct device *dev = &client->dev; ++ struct omnia_mcu *mcu; ++ int err; ++ ++ if (!client->irq) ++ return dev_err_probe(dev, -EINVAL, "IRQ resource not found\n"); ++ ++ mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL); ++ if (!mcu) ++ return -ENOMEM; ++ ++ mcu->client = client; ++ i2c_set_clientdata(client, mcu); ++ ++ err = omnia_mcu_read_features(mcu); ++ if (err) ++ return dev_err_probe(dev, err, ++ "Cannot determine MCU supported features\n"); ++ ++ if (mcu->features & OMNIA_FEAT_BOARD_INFO) { ++ err = omnia_mcu_read_board_info(mcu); ++ if (err) ++ return dev_err_probe(dev, err, ++ "Cannot read board info\n"); ++ } ++ ++ return 0; ++} ++ ++static const struct of_device_id of_omnia_mcu_match[] = { ++ { .compatible = "cznic,turris-omnia-mcu" }, ++ {} ++}; ++ ++static struct i2c_driver omnia_mcu_driver = { ++ .probe = omnia_mcu_probe, ++ .driver = { ++ .name = "turris-omnia-mcu", ++ .of_match_table = of_omnia_mcu_match, ++ .dev_groups = omnia_mcu_groups, ++ }, ++}; ++module_i2c_driver(omnia_mcu_driver); ++ ++MODULE_AUTHOR("Marek Behun "); ++MODULE_DESCRIPTION("CZ.NIC's Turris Omnia MCU"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/platform/cznic/turris-omnia-mcu.h +@@ -0,0 +1,74 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * CZ.NIC's Turris Omnia MCU driver ++ * ++ * 2024 by Marek Behún ++ */ ++ ++#ifndef __TURRIS_OMNIA_MCU_H ++#define __TURRIS_OMNIA_MCU_H ++ ++#include ++#include ++#include ++ ++struct i2c_client; ++ ++struct omnia_mcu { ++ struct i2c_client *client; ++ const char *type; ++ u32 features; ++ ++ /* board information */ ++ u64 board_serial_number; ++ u8 board_first_mac[ETH_ALEN]; ++ u8 board_revision; ++}; ++ ++int omnia_cmd_write_read(const struct i2c_client *client, ++ void *cmd, unsigned int cmd_len, ++ void *reply, unsigned int reply_len); ++ ++static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd, ++ void *reply, unsigned int len) ++{ ++ return omnia_cmd_write_read(client, &cmd, 1, reply, len); ++} ++ ++static inline int omnia_cmd_read_u32(const struct i2c_client *client, u8 cmd, ++ u32 *dst) ++{ ++ __le32 reply; ++ int err; ++ ++ err = omnia_cmd_read(client, cmd, &reply, sizeof(reply)); ++ if (err) ++ return err; ++ ++ *dst = le32_to_cpu(reply); ++ ++ return 0; ++} ++ ++static inline int omnia_cmd_read_u16(const struct i2c_client *client, u8 cmd, ++ u16 *dst) ++{ ++ __le16 reply; ++ int err; ++ ++ err = omnia_cmd_read(client, cmd, &reply, sizeof(reply)); ++ if (err) ++ return err; ++ ++ *dst = le16_to_cpu(reply); ++ ++ return 0; ++} ++ ++static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd, ++ u8 *reply) ++{ ++ return omnia_cmd_read(client, cmd, reply, sizeof(*reply)); ++} ++ ++#endif /* __TURRIS_OMNIA_MCU_H */ +--- /dev/null ++++ b/include/linux/turris-omnia-mcu-interface.h +@@ -0,0 +1,249 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * CZ.NIC's Turris Omnia MCU I2C interface commands definitions ++ * ++ * 2024 by Marek Behún ++ */ ++ ++#ifndef __TURRIS_OMNIA_MCU_INTERFACE_H ++#define __TURRIS_OMNIA_MCU_INTERFACE_H ++ ++#include ++#include ++ ++enum omnia_commands_e { ++ OMNIA_CMD_GET_STATUS_WORD = 0x01, /* slave sends status word back */ ++ OMNIA_CMD_GENERAL_CONTROL = 0x02, ++ OMNIA_CMD_LED_MODE = 0x03, /* default/user */ ++ OMNIA_CMD_LED_STATE = 0x04, /* LED on/off */ ++ OMNIA_CMD_LED_COLOR = 0x05, /* LED number + RED + GREEN + BLUE */ ++ OMNIA_CMD_USER_VOLTAGE = 0x06, ++ OMNIA_CMD_SET_BRIGHTNESS = 0x07, ++ OMNIA_CMD_GET_BRIGHTNESS = 0x08, ++ OMNIA_CMD_GET_RESET = 0x09, ++ OMNIA_CMD_GET_FW_VERSION_APP = 0x0A, /* 20B git hash number */ ++ OMNIA_CMD_SET_WATCHDOG_STATE = 0x0B, /* 0 - disable ++ * 1 - enable / ping ++ * after boot watchdog is started ++ * with 2 minutes timeout ++ */ ++ ++ /* OMNIA_CMD_WATCHDOG_STATUS = 0x0C, not implemented anymore */ ++ ++ OMNIA_CMD_GET_WATCHDOG_STATE = 0x0D, ++ OMNIA_CMD_GET_FW_VERSION_BOOT = 0x0E, /* 20B Git hash number */ ++ OMNIA_CMD_GET_FW_CHECKSUM = 0x0F, /* 4B length, 4B checksum */ ++ ++ /* available if FEATURES_SUPPORTED bit set in status word */ ++ OMNIA_CMD_GET_FEATURES = 0x10, ++ ++ /* available if EXT_CMD bit set in features */ ++ OMNIA_CMD_GET_EXT_STATUS_DWORD = 0x11, ++ OMNIA_CMD_EXT_CONTROL = 0x12, ++ OMNIA_CMD_GET_EXT_CONTROL_STATUS = 0x13, ++ ++ /* available if NEW_INT_API bit set in features */ ++ OMNIA_CMD_GET_INT_AND_CLEAR = 0x14, ++ OMNIA_CMD_GET_INT_MASK = 0x15, ++ OMNIA_CMD_SET_INT_MASK = 0x16, ++ ++ /* available if FLASHING bit set in features */ ++ OMNIA_CMD_FLASH = 0x19, ++ ++ /* available if WDT_PING bit set in features */ ++ OMNIA_CMD_SET_WDT_TIMEOUT = 0x20, ++ OMNIA_CMD_GET_WDT_TIMELEFT = 0x21, ++ ++ /* available if POWEROFF_WAKEUP bit set in features */ ++ OMNIA_CMD_SET_WAKEUP = 0x22, ++ OMNIA_CMD_GET_UPTIME_AND_WAKEUP = 0x23, ++ OMNIA_CMD_POWER_OFF = 0x24, ++ ++ /* available if USB_OVC_PROT_SETTING bit set in features */ ++ OMNIA_CMD_SET_USB_OVC_PROT = 0x25, ++ OMNIA_CMD_GET_USB_OVC_PROT = 0x26, ++ ++ /* available if TRNG bit set in features */ ++ OMNIA_CMD_TRNG_COLLECT_ENTROPY = 0x28, ++ ++ /* available if CRYPTO bit set in features */ ++ OMNIA_CMD_CRYPTO_GET_PUBLIC_KEY = 0x29, ++ OMNIA_CMD_CRYPTO_SIGN_MESSAGE = 0x2A, ++ OMNIA_CMD_CRYPTO_COLLECT_SIGNATURE = 0x2B, ++ ++ /* available if BOARD_INFO it set in features */ ++ OMNIA_CMD_BOARD_INFO_GET = 0x2C, ++ OMNIA_CMD_BOARD_INFO_BURN = 0x2D, ++ ++ /* available only at address 0x2b (LED-controller) */ ++ /* available only if LED_GAMMA_CORRECTION bit set in features */ ++ OMNIA_CMD_SET_GAMMA_CORRECTION = 0x30, ++ OMNIA_CMD_GET_GAMMA_CORRECTION = 0x31, ++ ++ /* available only at address 0x2b (LED-controller) */ ++ /* available only if PER_LED_CORRECTION bit set in features */ ++ /* available only if FROM_BIT_16_INVALID bit NOT set in features */ ++ OMNIA_CMD_SET_LED_CORRECTIONS = 0x32, ++ OMNIA_CMD_GET_LED_CORRECTIONS = 0x33, ++}; ++ ++enum omnia_flashing_commands_e { ++ OMNIA_FLASH_CMD_UNLOCK = 0x01, ++ OMNIA_FLASH_CMD_SIZE_AND_CSUM = 0x02, ++ OMNIA_FLASH_CMD_PROGRAM = 0x03, ++ OMNIA_FLASH_CMD_RESET = 0x04, ++}; ++ ++enum omnia_sts_word_e { ++ OMNIA_STS_MCU_TYPE_MASK = GENMASK(1, 0), ++ OMNIA_STS_MCU_TYPE_STM32 = FIELD_PREP_CONST(OMNIA_STS_MCU_TYPE_MASK, 0), ++ OMNIA_STS_MCU_TYPE_GD32 = FIELD_PREP_CONST(OMNIA_STS_MCU_TYPE_MASK, 1), ++ OMNIA_STS_MCU_TYPE_MKL = FIELD_PREP_CONST(OMNIA_STS_MCU_TYPE_MASK, 2), ++ OMNIA_STS_FEATURES_SUPPORTED = BIT(2), ++ OMNIA_STS_USER_REGULATOR_NOT_SUPPORTED = BIT(3), ++ OMNIA_STS_CARD_DET = BIT(4), ++ OMNIA_STS_MSATA_IND = BIT(5), ++ OMNIA_STS_USB30_OVC = BIT(6), ++ OMNIA_STS_USB31_OVC = BIT(7), ++ OMNIA_STS_USB30_PWRON = BIT(8), ++ OMNIA_STS_USB31_PWRON = BIT(9), ++ OMNIA_STS_ENABLE_4V5 = BIT(10), ++ OMNIA_STS_BUTTON_MODE = BIT(11), ++ OMNIA_STS_BUTTON_PRESSED = BIT(12), ++ OMNIA_STS_BUTTON_COUNTER_MASK = GENMASK(15, 13), ++}; ++ ++enum omnia_ctl_byte_e { ++ OMNIA_CTL_LIGHT_RST = BIT(0), ++ OMNIA_CTL_HARD_RST = BIT(1), ++ /* BIT(2) is currently reserved */ ++ OMNIA_CTL_USB30_PWRON = BIT(3), ++ OMNIA_CTL_USB31_PWRON = BIT(4), ++ OMNIA_CTL_ENABLE_4V5 = BIT(5), ++ OMNIA_CTL_BUTTON_MODE = BIT(6), ++ OMNIA_CTL_BOOTLOADER = BIT(7), ++}; ++ ++enum omnia_features_e { ++ OMNIA_FEAT_PERIPH_MCU = BIT(0), ++ OMNIA_FEAT_EXT_CMDS = BIT(1), ++ OMNIA_FEAT_WDT_PING = BIT(2), ++ OMNIA_FEAT_LED_STATE_EXT_MASK = GENMASK(4, 3), ++ OMNIA_FEAT_LED_STATE_EXT = FIELD_PREP_CONST(OMNIA_FEAT_LED_STATE_EXT_MASK, 1), ++ OMNIA_FEAT_LED_STATE_EXT_V32 = FIELD_PREP_CONST(OMNIA_FEAT_LED_STATE_EXT_MASK, 2), ++ OMNIA_FEAT_LED_GAMMA_CORRECTION = BIT(5), ++ OMNIA_FEAT_NEW_INT_API = BIT(6), ++ OMNIA_FEAT_BOOTLOADER = BIT(7), ++ OMNIA_FEAT_FLASHING = BIT(8), ++ OMNIA_FEAT_NEW_MESSAGE_API = BIT(9), ++ OMNIA_FEAT_BRIGHTNESS_INT = BIT(10), ++ OMNIA_FEAT_POWEROFF_WAKEUP = BIT(11), ++ OMNIA_FEAT_CAN_OLD_MESSAGE_API = BIT(12), ++ OMNIA_FEAT_TRNG = BIT(13), ++ OMNIA_FEAT_CRYPTO = BIT(14), ++ OMNIA_FEAT_BOARD_INFO = BIT(15), ++ ++ /* ++ * Orginally the features command replied only 16 bits. If more were ++ * read, either the I2C transaction failed or 0xff bytes were sent. ++ * Therefore to consider bits 16 - 31 valid, one bit (20) was reserved ++ * to be zero. ++ */ ++ ++ /* Bits 16 - 19 correspond to bits 0 - 3 of status word */ ++ OMNIA_FEAT_MCU_TYPE_MASK = GENMASK(17, 16), ++ OMNIA_FEAT_MCU_TYPE_STM32 = FIELD_PREP_CONST(OMNIA_FEAT_MCU_TYPE_MASK, 0), ++ OMNIA_FEAT_MCU_TYPE_GD32 = FIELD_PREP_CONST(OMNIA_FEAT_MCU_TYPE_MASK, 1), ++ OMNIA_FEAT_MCU_TYPE_MKL = FIELD_PREP_CONST(OMNIA_FEAT_MCU_TYPE_MASK, 2), ++ OMNIA_FEAT_FEATURES_SUPPORTED = BIT(18), ++ OMNIA_FEAT_USER_REGULATOR_NOT_SUPPORTED = BIT(19), ++ ++ /* must not be set */ ++ OMNIA_FEAT_FROM_BIT_16_INVALID = BIT(20), ++ ++ OMNIA_FEAT_PER_LED_CORRECTION = BIT(21), ++ OMNIA_FEAT_USB_OVC_PROT_SETTING = BIT(22), ++}; ++ ++enum omnia_ext_sts_dword_e { ++ OMNIA_EXT_STS_SFP_nDET = BIT(0), ++ OMNIA_EXT_STS_LED_STATES_MASK = GENMASK(31, 12), ++ OMNIA_EXT_STS_WLAN0_MSATA_LED = BIT(12), ++ OMNIA_EXT_STS_WLAN1_LED = BIT(13), ++ OMNIA_EXT_STS_WLAN2_LED = BIT(14), ++ OMNIA_EXT_STS_WPAN0_LED = BIT(15), ++ OMNIA_EXT_STS_WPAN1_LED = BIT(16), ++ OMNIA_EXT_STS_WPAN2_LED = BIT(17), ++ OMNIA_EXT_STS_WAN_LED0 = BIT(18), ++ OMNIA_EXT_STS_WAN_LED1 = BIT(19), ++ OMNIA_EXT_STS_LAN0_LED0 = BIT(20), ++ OMNIA_EXT_STS_LAN0_LED1 = BIT(21), ++ OMNIA_EXT_STS_LAN1_LED0 = BIT(22), ++ OMNIA_EXT_STS_LAN1_LED1 = BIT(23), ++ OMNIA_EXT_STS_LAN2_LED0 = BIT(24), ++ OMNIA_EXT_STS_LAN2_LED1 = BIT(25), ++ OMNIA_EXT_STS_LAN3_LED0 = BIT(26), ++ OMNIA_EXT_STS_LAN3_LED1 = BIT(27), ++ OMNIA_EXT_STS_LAN4_LED0 = BIT(28), ++ OMNIA_EXT_STS_LAN4_LED1 = BIT(29), ++ OMNIA_EXT_STS_LAN5_LED0 = BIT(30), ++ OMNIA_EXT_STS_LAN5_LED1 = BIT(31), ++}; ++ ++enum omnia_ext_ctl_e { ++ OMNIA_EXT_CTL_nRES_MMC = BIT(0), ++ OMNIA_EXT_CTL_nRES_LAN = BIT(1), ++ OMNIA_EXT_CTL_nRES_PHY = BIT(2), ++ OMNIA_EXT_CTL_nPERST0 = BIT(3), ++ OMNIA_EXT_CTL_nPERST1 = BIT(4), ++ OMNIA_EXT_CTL_nPERST2 = BIT(5), ++ OMNIA_EXT_CTL_PHY_SFP = BIT(6), ++ OMNIA_EXT_CTL_PHY_SFP_AUTO = BIT(7), ++ OMNIA_EXT_CTL_nVHV_CTRL = BIT(8), ++}; ++ ++enum omnia_int_e { ++ OMNIA_INT_CARD_DET = BIT(0), ++ OMNIA_INT_MSATA_IND = BIT(1), ++ OMNIA_INT_USB30_OVC = BIT(2), ++ OMNIA_INT_USB31_OVC = BIT(3), ++ OMNIA_INT_BUTTON_PRESSED = BIT(4), ++ OMNIA_INT_SFP_nDET = BIT(5), ++ OMNIA_INT_BRIGHTNESS_CHANGED = BIT(6), ++ OMNIA_INT_TRNG = BIT(7), ++ OMNIA_INT_MESSAGE_SIGNED = BIT(8), ++ ++ OMNIA_INT_LED_STATES_MASK = GENMASK(31, 12), ++ OMNIA_INT_WLAN0_MSATA_LED = BIT(12), ++ OMNIA_INT_WLAN1_LED = BIT(13), ++ OMNIA_INT_WLAN2_LED = BIT(14), ++ OMNIA_INT_WPAN0_LED = BIT(15), ++ OMNIA_INT_WPAN1_LED = BIT(16), ++ OMNIA_INT_WPAN2_LED = BIT(17), ++ OMNIA_INT_WAN_LED0 = BIT(18), ++ OMNIA_INT_WAN_LED1 = BIT(19), ++ OMNIA_INT_LAN0_LED0 = BIT(20), ++ OMNIA_INT_LAN0_LED1 = BIT(21), ++ OMNIA_INT_LAN1_LED0 = BIT(22), ++ OMNIA_INT_LAN1_LED1 = BIT(23), ++ OMNIA_INT_LAN2_LED0 = BIT(24), ++ OMNIA_INT_LAN2_LED1 = BIT(25), ++ OMNIA_INT_LAN3_LED0 = BIT(26), ++ OMNIA_INT_LAN3_LED1 = BIT(27), ++ OMNIA_INT_LAN4_LED0 = BIT(28), ++ OMNIA_INT_LAN4_LED1 = BIT(29), ++ OMNIA_INT_LAN5_LED0 = BIT(30), ++ OMNIA_INT_LAN5_LED1 = BIT(31), ++}; ++ ++enum omnia_cmd_poweroff_e { ++ OMNIA_CMD_POWER_OFF_POWERON_BUTTON = BIT(0), ++ OMNIA_CMD_POWER_OFF_MAGIC = 0xdead, ++}; ++ ++enum omnia_cmd_usb_ovc_prot_e { ++ OMNIA_CMD_xET_USB_OVC_PROT_PORT_MASK = GENMASK(3, 0), ++ OMNIA_CMD_xET_USB_OVC_PROT_ENABLE = BIT(4), ++}; ++ ++#endif /* __TURRIS_OMNIA_MCU_INTERFACE_H */ diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-03-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch b/target/linux/mvebu/patches-6.6/820-v6.11-03-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch new file mode 100644 index 0000000000..3309a773a9 --- /dev/null +++ b/target/linux/mvebu/patches-6.6/820-v6.11-03-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch @@ -0,0 +1,1311 @@ +From 7f4f2744f9788312e12940b516b51a0a466b137e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 1 Jul 2024 13:30:05 +0200 +Subject: [PATCH 03/11] platform: cznic: turris-omnia-mcu: Add support for MCU + connected GPIOs +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add support for GPIOs connected to the MCU on the Turris Omnia board. + +This includes: +- front button pin +- enable pins for USB regulators +- MiniPCIe / mSATA card presence pins in MiniPCIe port 0 +- LED output pins from WAN ethernet PHY, LAN switch and MiniPCIe ports +- on board revisions 32+ also various peripheral resets and another + voltage regulator enable pin + +Signed-off-by: Marek Behún +Acked-by: Bartosz Golaszewski +Link: https://lore.kernel.org/r/20240701113010.16447-4-kabel@kernel.org +Signed-off-by: Arnd Bergmann +--- + .../sysfs-bus-i2c-devices-turris-omnia-mcu | 16 + + drivers/platform/cznic/Kconfig | 15 + + drivers/platform/cznic/Makefile | 1 + + .../platform/cznic/turris-omnia-mcu-base.c | 3 +- + .../platform/cznic/turris-omnia-mcu-gpio.c | 1094 +++++++++++++++++ + drivers/platform/cznic/turris-omnia-mcu.h | 68 + + 6 files changed, 1196 insertions(+), 1 deletion(-) + create mode 100644 drivers/platform/cznic/turris-omnia-mcu-gpio.c + +--- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu ++++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu +@@ -22,6 +22,22 @@ Description: (RO) Contains device first + + Format: %pM. + ++What: /sys/bus/i2c/devices//front_button_mode ++Date: September 2024 ++KernelVersion: 6.11 ++Contact: Marek Behún ++Description: (RW) The front button on the Turris Omnia router can be ++ configured either to change the intensity of all the LEDs on the ++ front panel, or to send the press event to the CPU as an ++ interrupt. ++ ++ This file switches between these two modes: ++ - "mcu" makes the button press event be handled by the MCU to ++ change the LEDs panel intensity. ++ - "cpu" makes the button press event be handled by the CPU. ++ ++ Format: %s. ++ + What: /sys/bus/i2c/devices//fw_features + Date: September 2024 + KernelVersion: 6.11 +--- a/drivers/platform/cznic/Kconfig ++++ b/drivers/platform/cznic/Kconfig +@@ -16,9 +16,24 @@ config TURRIS_OMNIA_MCU + tristate "Turris Omnia MCU driver" + depends on MACH_ARMADA_38X || COMPILE_TEST + depends on I2C ++ select GPIOLIB ++ select GPIOLIB_IRQCHIP + help + Say Y here to add support for the features implemented by the + microcontroller on the CZ.NIC's Turris Omnia SOHO router. ++ The features include: ++ - GPIO pins ++ - to get front button press events (the front button can be ++ configured either to generate press events to the CPU or to change ++ front LEDs panel brightness) ++ - to enable / disable USB port voltage regulators and to detect ++ USB overcurrent ++ - to detect MiniPCIe / mSATA card presence in MiniPCIe port 0 ++ - to configure resets of various peripherals on board revisions 32+ ++ - to enable / disable the VHV voltage regulator to the SOC in order ++ to be able to program SOC's OTP on board revisions 32+ ++ - to get input from the LED output pins of the WAN ethernet PHY, LAN ++ switch and MiniPCIe ports + To compile this driver as a module, choose M here; the module will be + called turris-omnia-mcu. + +--- a/drivers/platform/cznic/Makefile ++++ b/drivers/platform/cznic/Makefile +@@ -2,3 +2,4 @@ + + obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o + turris-omnia-mcu-y := turris-omnia-mcu-base.o ++turris-omnia-mcu-y += turris-omnia-mcu-gpio.o +--- a/drivers/platform/cznic/turris-omnia-mcu-base.c ++++ b/drivers/platform/cznic/turris-omnia-mcu-base.c +@@ -196,6 +196,7 @@ static const struct attribute_group omni + + static const struct attribute_group *omnia_mcu_groups[] = { + &omnia_mcu_base_group, ++ &omnia_mcu_gpio_group, + NULL + }; + +@@ -370,7 +371,7 @@ static int omnia_mcu_probe(struct i2c_cl + "Cannot read board info\n"); + } + +- return 0; ++ return omnia_mcu_register_gpiochip(mcu); + } + + static const struct of_device_id of_omnia_mcu_match[] = { +--- /dev/null ++++ b/drivers/platform/cznic/turris-omnia-mcu-gpio.c +@@ -0,0 +1,1094 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * CZ.NIC's Turris Omnia MCU GPIO and IRQ driver ++ * ++ * 2024 by Marek Behún ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include "turris-omnia-mcu.h" ++ ++#define OMNIA_CMD_INT_ARG_LEN 8 ++#define FRONT_BUTTON_RELEASE_DELAY_MS 50 ++ ++static const char * const omnia_mcu_gpio_templates[64] = { ++ /* GPIOs with value read from the 16-bit wide status */ ++ [4] = "MiniPCIe0 Card Detect", ++ [5] = "MiniPCIe0 mSATA Indicator", ++ [6] = "Front USB3 port over-current", ++ [7] = "Rear USB3 port over-current", ++ [8] = "Front USB3 port power", ++ [9] = "Rear USB3 port power", ++ [12] = "Front Button", ++ ++ /* GPIOs with value read from the 32-bit wide extended status */ ++ [16] = "SFP nDET", ++ [28] = "MiniPCIe0 LED", ++ [29] = "MiniPCIe1 LED", ++ [30] = "MiniPCIe2 LED", ++ [31] = "MiniPCIe0 PAN LED", ++ [32] = "MiniPCIe1 PAN LED", ++ [33] = "MiniPCIe2 PAN LED", ++ [34] = "WAN PHY LED0", ++ [35] = "WAN PHY LED1", ++ [36] = "LAN switch p0 LED0", ++ [37] = "LAN switch p0 LED1", ++ [38] = "LAN switch p1 LED0", ++ [39] = "LAN switch p1 LED1", ++ [40] = "LAN switch p2 LED0", ++ [41] = "LAN switch p2 LED1", ++ [42] = "LAN switch p3 LED0", ++ [43] = "LAN switch p3 LED1", ++ [44] = "LAN switch p4 LED0", ++ [45] = "LAN switch p4 LED1", ++ [46] = "LAN switch p5 LED0", ++ [47] = "LAN switch p5 LED1", ++ ++ /* GPIOs with value read from the 16-bit wide extended control status */ ++ [48] = "eMMC nRESET", ++ [49] = "LAN switch nRESET", ++ [50] = "WAN PHY nRESET", ++ [51] = "MiniPCIe0 nPERST", ++ [52] = "MiniPCIe1 nPERST", ++ [53] = "MiniPCIe2 nPERST", ++ [54] = "WAN PHY SFP mux", ++ [56] = "VHV power disable", ++}; ++ ++struct omnia_gpio { ++ u8 cmd; ++ u8 ctl_cmd; ++ u8 bit; ++ u8 ctl_bit; ++ u8 int_bit; ++ u16 feat; ++ u16 feat_mask; ++}; ++ ++#define OMNIA_GPIO_INVALID_INT_BIT 0xff ++ ++#define _DEF_GPIO(_cmd, _ctl_cmd, _bit, _ctl_bit, _int_bit, _feat, _feat_mask) \ ++ { \ ++ .cmd = _cmd, \ ++ .ctl_cmd = _ctl_cmd, \ ++ .bit = _bit, \ ++ .ctl_bit = _ctl_bit, \ ++ .int_bit = (_int_bit) < 0 ? OMNIA_GPIO_INVALID_INT_BIT \ ++ : (_int_bit), \ ++ .feat = _feat, \ ++ .feat_mask = _feat_mask, \ ++ } ++ ++#define _DEF_GPIO_STS(_name) \ ++ _DEF_GPIO(OMNIA_CMD_GET_STATUS_WORD, 0, __bf_shf(OMNIA_STS_ ## _name), \ ++ 0, __bf_shf(OMNIA_INT_ ## _name), 0, 0) ++ ++#define _DEF_GPIO_CTL(_name) \ ++ _DEF_GPIO(OMNIA_CMD_GET_STATUS_WORD, OMNIA_CMD_GENERAL_CONTROL, \ ++ __bf_shf(OMNIA_STS_ ## _name), __bf_shf(OMNIA_CTL_ ## _name), \ ++ -1, 0, 0) ++ ++#define _DEF_GPIO_EXT_STS(_name, _feat) \ ++ _DEF_GPIO(OMNIA_CMD_GET_EXT_STATUS_DWORD, 0, \ ++ __bf_shf(OMNIA_EXT_STS_ ## _name), 0, \ ++ __bf_shf(OMNIA_INT_ ## _name), \ ++ OMNIA_FEAT_ ## _feat | OMNIA_FEAT_EXT_CMDS, \ ++ OMNIA_FEAT_ ## _feat | OMNIA_FEAT_EXT_CMDS) ++ ++#define _DEF_GPIO_EXT_STS_LED(_name, _ledext) \ ++ _DEF_GPIO(OMNIA_CMD_GET_EXT_STATUS_DWORD, 0, \ ++ __bf_shf(OMNIA_EXT_STS_ ## _name), 0, \ ++ __bf_shf(OMNIA_INT_ ## _name), \ ++ OMNIA_FEAT_LED_STATE_ ## _ledext, \ ++ OMNIA_FEAT_LED_STATE_EXT_MASK) ++ ++#define _DEF_GPIO_EXT_STS_LEDALL(_name) \ ++ _DEF_GPIO(OMNIA_CMD_GET_EXT_STATUS_DWORD, 0, \ ++ __bf_shf(OMNIA_EXT_STS_ ## _name), 0, \ ++ __bf_shf(OMNIA_INT_ ## _name), \ ++ OMNIA_FEAT_LED_STATE_EXT_MASK, 0) ++ ++#define _DEF_GPIO_EXT_CTL(_name, _feat) \ ++ _DEF_GPIO(OMNIA_CMD_GET_EXT_CONTROL_STATUS, OMNIA_CMD_EXT_CONTROL, \ ++ __bf_shf(OMNIA_EXT_CTL_ ## _name), \ ++ __bf_shf(OMNIA_EXT_CTL_ ## _name), -1, \ ++ OMNIA_FEAT_ ## _feat | OMNIA_FEAT_EXT_CMDS, \ ++ OMNIA_FEAT_ ## _feat | OMNIA_FEAT_EXT_CMDS) ++ ++#define _DEF_INT(_name) \ ++ _DEF_GPIO(0, 0, 0, 0, __bf_shf(OMNIA_INT_ ## _name), 0, 0) ++ ++static inline bool is_int_bit_valid(const struct omnia_gpio *gpio) ++{ ++ return gpio->int_bit != OMNIA_GPIO_INVALID_INT_BIT; ++} ++ ++static const struct omnia_gpio omnia_gpios[64] = { ++ /* GPIOs with value read from the 16-bit wide status */ ++ [4] = _DEF_GPIO_STS(CARD_DET), ++ [5] = _DEF_GPIO_STS(MSATA_IND), ++ [6] = _DEF_GPIO_STS(USB30_OVC), ++ [7] = _DEF_GPIO_STS(USB31_OVC), ++ [8] = _DEF_GPIO_CTL(USB30_PWRON), ++ [9] = _DEF_GPIO_CTL(USB31_PWRON), ++ ++ /* brightness changed interrupt, no GPIO */ ++ [11] = _DEF_INT(BRIGHTNESS_CHANGED), ++ ++ [12] = _DEF_GPIO_STS(BUTTON_PRESSED), ++ ++ /* TRNG interrupt, no GPIO */ ++ [13] = _DEF_INT(TRNG), ++ ++ /* MESSAGE_SIGNED interrupt, no GPIO */ ++ [14] = _DEF_INT(MESSAGE_SIGNED), ++ ++ /* GPIOs with value read from the 32-bit wide extended status */ ++ [16] = _DEF_GPIO_EXT_STS(SFP_nDET, PERIPH_MCU), ++ [28] = _DEF_GPIO_EXT_STS_LEDALL(WLAN0_MSATA_LED), ++ [29] = _DEF_GPIO_EXT_STS_LEDALL(WLAN1_LED), ++ [30] = _DEF_GPIO_EXT_STS_LEDALL(WLAN2_LED), ++ [31] = _DEF_GPIO_EXT_STS_LED(WPAN0_LED, EXT), ++ [32] = _DEF_GPIO_EXT_STS_LED(WPAN1_LED, EXT), ++ [33] = _DEF_GPIO_EXT_STS_LED(WPAN2_LED, EXT), ++ [34] = _DEF_GPIO_EXT_STS_LEDALL(WAN_LED0), ++ [35] = _DEF_GPIO_EXT_STS_LED(WAN_LED1, EXT_V32), ++ [36] = _DEF_GPIO_EXT_STS_LEDALL(LAN0_LED0), ++ [37] = _DEF_GPIO_EXT_STS_LEDALL(LAN0_LED1), ++ [38] = _DEF_GPIO_EXT_STS_LEDALL(LAN1_LED0), ++ [39] = _DEF_GPIO_EXT_STS_LEDALL(LAN1_LED1), ++ [40] = _DEF_GPIO_EXT_STS_LEDALL(LAN2_LED0), ++ [41] = _DEF_GPIO_EXT_STS_LEDALL(LAN2_LED1), ++ [42] = _DEF_GPIO_EXT_STS_LEDALL(LAN3_LED0), ++ [43] = _DEF_GPIO_EXT_STS_LEDALL(LAN3_LED1), ++ [44] = _DEF_GPIO_EXT_STS_LEDALL(LAN4_LED0), ++ [45] = _DEF_GPIO_EXT_STS_LEDALL(LAN4_LED1), ++ [46] = _DEF_GPIO_EXT_STS_LEDALL(LAN5_LED0), ++ [47] = _DEF_GPIO_EXT_STS_LEDALL(LAN5_LED1), ++ ++ /* GPIOs with value read from the 16-bit wide extended control status */ ++ [48] = _DEF_GPIO_EXT_CTL(nRES_MMC, PERIPH_MCU), ++ [49] = _DEF_GPIO_EXT_CTL(nRES_LAN, PERIPH_MCU), ++ [50] = _DEF_GPIO_EXT_CTL(nRES_PHY, PERIPH_MCU), ++ [51] = _DEF_GPIO_EXT_CTL(nPERST0, PERIPH_MCU), ++ [52] = _DEF_GPIO_EXT_CTL(nPERST1, PERIPH_MCU), ++ [53] = _DEF_GPIO_EXT_CTL(nPERST2, PERIPH_MCU), ++ [54] = _DEF_GPIO_EXT_CTL(PHY_SFP, PERIPH_MCU), ++ [56] = _DEF_GPIO_EXT_CTL(nVHV_CTRL, PERIPH_MCU), ++}; ++ ++/* mapping from interrupts to indexes of GPIOs in the omnia_gpios array */ ++static const u8 omnia_int_to_gpio_idx[32] = { ++ [__bf_shf(OMNIA_INT_CARD_DET)] = 4, ++ [__bf_shf(OMNIA_INT_MSATA_IND)] = 5, ++ [__bf_shf(OMNIA_INT_USB30_OVC)] = 6, ++ [__bf_shf(OMNIA_INT_USB31_OVC)] = 7, ++ [__bf_shf(OMNIA_INT_BUTTON_PRESSED)] = 12, ++ [__bf_shf(OMNIA_INT_TRNG)] = 13, ++ [__bf_shf(OMNIA_INT_MESSAGE_SIGNED)] = 14, ++ [__bf_shf(OMNIA_INT_SFP_nDET)] = 16, ++ [__bf_shf(OMNIA_INT_BRIGHTNESS_CHANGED)] = 11, ++ [__bf_shf(OMNIA_INT_WLAN0_MSATA_LED)] = 28, ++ [__bf_shf(OMNIA_INT_WLAN1_LED)] = 29, ++ [__bf_shf(OMNIA_INT_WLAN2_LED)] = 30, ++ [__bf_shf(OMNIA_INT_WPAN0_LED)] = 31, ++ [__bf_shf(OMNIA_INT_WPAN1_LED)] = 32, ++ [__bf_shf(OMNIA_INT_WPAN2_LED)] = 33, ++ [__bf_shf(OMNIA_INT_WAN_LED0)] = 34, ++ [__bf_shf(OMNIA_INT_WAN_LED1)] = 35, ++ [__bf_shf(OMNIA_INT_LAN0_LED0)] = 36, ++ [__bf_shf(OMNIA_INT_LAN0_LED1)] = 37, ++ [__bf_shf(OMNIA_INT_LAN1_LED0)] = 38, ++ [__bf_shf(OMNIA_INT_LAN1_LED1)] = 39, ++ [__bf_shf(OMNIA_INT_LAN2_LED0)] = 40, ++ [__bf_shf(OMNIA_INT_LAN2_LED1)] = 41, ++ [__bf_shf(OMNIA_INT_LAN3_LED0)] = 42, ++ [__bf_shf(OMNIA_INT_LAN3_LED1)] = 43, ++ [__bf_shf(OMNIA_INT_LAN4_LED0)] = 44, ++ [__bf_shf(OMNIA_INT_LAN4_LED1)] = 45, ++ [__bf_shf(OMNIA_INT_LAN5_LED0)] = 46, ++ [__bf_shf(OMNIA_INT_LAN5_LED1)] = 47, ++}; ++ ++/* index of PHY_SFP GPIO in the omnia_gpios array */ ++#define OMNIA_GPIO_PHY_SFP_OFFSET 54 ++ ++static int omnia_ctl_cmd_locked(struct omnia_mcu *mcu, u8 cmd, u16 val, u16 mask) ++{ ++ unsigned int len; ++ u8 buf[5]; ++ ++ buf[0] = cmd; ++ ++ switch (cmd) { ++ case OMNIA_CMD_GENERAL_CONTROL: ++ buf[1] = val; ++ buf[2] = mask; ++ len = 3; ++ break; ++ ++ case OMNIA_CMD_EXT_CONTROL: ++ put_unaligned_le16(val, &buf[1]); ++ put_unaligned_le16(mask, &buf[3]); ++ len = 5; ++ break; ++ ++ default: ++ BUG(); ++ } ++ ++ return omnia_cmd_write(mcu->client, buf, len); ++} ++ ++static int omnia_ctl_cmd(struct omnia_mcu *mcu, u8 cmd, u16 val, u16 mask) ++{ ++ guard(mutex)(&mcu->lock); ++ ++ return omnia_ctl_cmd_locked(mcu, cmd, val, mask); ++} ++ ++static int omnia_gpio_request(struct gpio_chip *gc, unsigned int offset) ++{ ++ if (!omnia_gpios[offset].cmd) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static int omnia_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) ++{ ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ ++ if (offset == OMNIA_GPIO_PHY_SFP_OFFSET) { ++ int val; ++ ++ scoped_guard(mutex, &mcu->lock) { ++ val = omnia_cmd_read_bit(mcu->client, ++ OMNIA_CMD_GET_EXT_CONTROL_STATUS, ++ OMNIA_EXT_CTL_PHY_SFP_AUTO); ++ if (val < 0) ++ return val; ++ } ++ ++ if (val) ++ return GPIO_LINE_DIRECTION_IN; ++ ++ return GPIO_LINE_DIRECTION_OUT; ++ } ++ ++ if (omnia_gpios[offset].ctl_cmd) ++ return GPIO_LINE_DIRECTION_OUT; ++ ++ return GPIO_LINE_DIRECTION_IN; ++} ++ ++static int omnia_gpio_direction_input(struct gpio_chip *gc, unsigned int offset) ++{ ++ const struct omnia_gpio *gpio = &omnia_gpios[offset]; ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ ++ if (offset == OMNIA_GPIO_PHY_SFP_OFFSET) ++ return omnia_ctl_cmd(mcu, OMNIA_CMD_EXT_CONTROL, ++ OMNIA_EXT_CTL_PHY_SFP_AUTO, ++ OMNIA_EXT_CTL_PHY_SFP_AUTO); ++ ++ if (gpio->ctl_cmd) ++ return -ENOTSUPP; ++ ++ return 0; ++} ++ ++static int omnia_gpio_direction_output(struct gpio_chip *gc, ++ unsigned int offset, int value) ++{ ++ const struct omnia_gpio *gpio = &omnia_gpios[offset]; ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ u16 val, mask; ++ ++ if (!gpio->ctl_cmd) ++ return -ENOTSUPP; ++ ++ mask = BIT(gpio->ctl_bit); ++ val = value ? mask : 0; ++ ++ if (offset == OMNIA_GPIO_PHY_SFP_OFFSET) ++ mask |= OMNIA_EXT_CTL_PHY_SFP_AUTO; ++ ++ return omnia_ctl_cmd(mcu, gpio->ctl_cmd, val, mask); ++} ++ ++static int omnia_gpio_get(struct gpio_chip *gc, unsigned int offset) ++{ ++ const struct omnia_gpio *gpio = &omnia_gpios[offset]; ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ ++ /* ++ * If firmware does not support the new interrupt API, we are informed ++ * of every change of the status word by an interrupt from MCU and save ++ * its value in the interrupt service routine. Simply return the saved ++ * value. ++ */ ++ if (gpio->cmd == OMNIA_CMD_GET_STATUS_WORD && ++ !(mcu->features & OMNIA_FEAT_NEW_INT_API)) ++ return test_bit(gpio->bit, &mcu->last_status); ++ ++ guard(mutex)(&mcu->lock); ++ ++ /* ++ * If firmware does support the new interrupt API, we may have cached ++ * the value of a GPIO in the interrupt service routine. If not, read ++ * the relevant bit now. ++ */ ++ if (is_int_bit_valid(gpio) && test_bit(gpio->int_bit, &mcu->is_cached)) ++ return test_bit(gpio->int_bit, &mcu->cached); ++ ++ return omnia_cmd_read_bit(mcu->client, gpio->cmd, BIT(gpio->bit)); ++} ++ ++static unsigned long * ++_relevant_field_for_sts_cmd(u8 cmd, unsigned long *sts, unsigned long *ext_sts, ++ unsigned long *ext_ctl) ++{ ++ switch (cmd) { ++ case OMNIA_CMD_GET_STATUS_WORD: ++ return sts; ++ case OMNIA_CMD_GET_EXT_STATUS_DWORD: ++ return ext_sts; ++ case OMNIA_CMD_GET_EXT_CONTROL_STATUS: ++ return ext_ctl; ++ default: ++ return NULL; ++ } ++} ++ ++static int omnia_gpio_get_multiple(struct gpio_chip *gc, unsigned long *mask, ++ unsigned long *bits) ++{ ++ unsigned long sts = 0, ext_sts = 0, ext_ctl = 0, *field; ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ struct i2c_client *client = mcu->client; ++ unsigned int i; ++ int err; ++ ++ /* determine which bits to read from the 3 possible commands */ ++ for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) { ++ field = _relevant_field_for_sts_cmd(omnia_gpios[i].cmd, ++ &sts, &ext_sts, &ext_ctl); ++ if (!field) ++ continue; ++ ++ __set_bit(omnia_gpios[i].bit, field); ++ } ++ ++ guard(mutex)(&mcu->lock); ++ ++ if (mcu->features & OMNIA_FEAT_NEW_INT_API) { ++ /* read relevant bits from status */ ++ err = omnia_cmd_read_bits(client, OMNIA_CMD_GET_STATUS_WORD, ++ sts, &sts); ++ if (err) ++ return err; ++ } else { ++ /* ++ * Use status word value cached in the interrupt service routine ++ * if firmware does not support the new interrupt API. ++ */ ++ sts = mcu->last_status; ++ } ++ ++ /* read relevant bits from extended status */ ++ err = omnia_cmd_read_bits(client, OMNIA_CMD_GET_EXT_STATUS_DWORD, ++ ext_sts, &ext_sts); ++ if (err) ++ return err; ++ ++ /* read relevant bits from extended control */ ++ err = omnia_cmd_read_bits(client, OMNIA_CMD_GET_EXT_CONTROL_STATUS, ++ ext_ctl, &ext_ctl); ++ if (err) ++ return err; ++ ++ /* assign relevant bits in result */ ++ for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) { ++ field = _relevant_field_for_sts_cmd(omnia_gpios[i].cmd, ++ &sts, &ext_sts, &ext_ctl); ++ if (!field) ++ continue; ++ ++ __assign_bit(i, bits, test_bit(omnia_gpios[i].bit, field)); ++ } ++ ++ return 0; ++} ++ ++static void omnia_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) ++{ ++ const struct omnia_gpio *gpio = &omnia_gpios[offset]; ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ u16 val, mask; ++ ++ if (!gpio->ctl_cmd) ++ return; ++ ++ mask = BIT(gpio->ctl_bit); ++ val = value ? mask : 0; ++ ++ omnia_ctl_cmd(mcu, gpio->ctl_cmd, val, mask); ++} ++ ++static void omnia_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask, ++ unsigned long *bits) ++{ ++ unsigned long ctl = 0, ctl_mask = 0, ext_ctl = 0, ext_ctl_mask = 0; ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ unsigned int i; ++ ++ for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) { ++ unsigned long *field, *field_mask; ++ u8 bit = omnia_gpios[i].ctl_bit; ++ ++ switch (omnia_gpios[i].ctl_cmd) { ++ case OMNIA_CMD_GENERAL_CONTROL: ++ field = &ctl; ++ field_mask = &ctl_mask; ++ break; ++ case OMNIA_CMD_EXT_CONTROL: ++ field = &ext_ctl; ++ field_mask = &ext_ctl_mask; ++ break; ++ default: ++ field = field_mask = NULL; ++ break; ++ } ++ ++ if (!field) ++ continue; ++ ++ __set_bit(bit, field_mask); ++ __assign_bit(bit, field, test_bit(i, bits)); ++ } ++ ++ guard(mutex)(&mcu->lock); ++ ++ if (ctl_mask) ++ omnia_ctl_cmd_locked(mcu, OMNIA_CMD_GENERAL_CONTROL, ++ ctl, ctl_mask); ++ ++ if (ext_ctl_mask) ++ omnia_ctl_cmd_locked(mcu, OMNIA_CMD_EXT_CONTROL, ++ ext_ctl, ext_ctl_mask); ++} ++ ++static bool omnia_gpio_available(struct omnia_mcu *mcu, ++ const struct omnia_gpio *gpio) ++{ ++ if (gpio->feat_mask) ++ return (mcu->features & gpio->feat_mask) == gpio->feat; ++ ++ if (gpio->feat) ++ return mcu->features & gpio->feat; ++ ++ return true; ++} ++ ++static int omnia_gpio_init_valid_mask(struct gpio_chip *gc, ++ unsigned long *valid_mask, ++ unsigned int ngpios) ++{ ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ ++ for (unsigned int i = 0; i < ngpios; i++) { ++ const struct omnia_gpio *gpio = &omnia_gpios[i]; ++ ++ if (gpio->cmd || is_int_bit_valid(gpio)) ++ __assign_bit(i, valid_mask, ++ omnia_gpio_available(mcu, gpio)); ++ else ++ __clear_bit(i, valid_mask); ++ } ++ ++ return 0; ++} ++ ++static int omnia_gpio_of_xlate(struct gpio_chip *gc, ++ const struct of_phandle_args *gpiospec, ++ u32 *flags) ++{ ++ u32 bank, gpio; ++ ++ if (WARN_ON(gpiospec->args_count != 3)) ++ return -EINVAL; ++ ++ if (flags) ++ *flags = gpiospec->args[2]; ++ ++ bank = gpiospec->args[0]; ++ gpio = gpiospec->args[1]; ++ ++ switch (bank) { ++ case 0: ++ return gpio < 16 ? gpio : -EINVAL; ++ case 1: ++ return gpio < 32 ? 16 + gpio : -EINVAL; ++ case 2: ++ return gpio < 16 ? 48 + gpio : -EINVAL; ++ default: ++ return -EINVAL; ++ } ++} ++ ++static void omnia_irq_shutdown(struct irq_data *d) ++{ ++ struct gpio_chip *gc = irq_data_get_irq_chip_data(d); ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ irq_hw_number_t hwirq = irqd_to_hwirq(d); ++ u8 bit = omnia_gpios[hwirq].int_bit; ++ ++ __clear_bit(bit, &mcu->rising); ++ __clear_bit(bit, &mcu->falling); ++} ++ ++static void omnia_irq_mask(struct irq_data *d) ++{ ++ struct gpio_chip *gc = irq_data_get_irq_chip_data(d); ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ irq_hw_number_t hwirq = irqd_to_hwirq(d); ++ u8 bit = omnia_gpios[hwirq].int_bit; ++ ++ if (!omnia_gpios[hwirq].cmd) ++ __clear_bit(bit, &mcu->rising); ++ __clear_bit(bit, &mcu->mask); ++ gpiochip_disable_irq(gc, hwirq); ++} ++ ++static void omnia_irq_unmask(struct irq_data *d) ++{ ++ struct gpio_chip *gc = irq_data_get_irq_chip_data(d); ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ irq_hw_number_t hwirq = irqd_to_hwirq(d); ++ u8 bit = omnia_gpios[hwirq].int_bit; ++ ++ gpiochip_enable_irq(gc, hwirq); ++ __set_bit(bit, &mcu->mask); ++ if (!omnia_gpios[hwirq].cmd) ++ __set_bit(bit, &mcu->rising); ++} ++ ++static int omnia_irq_set_type(struct irq_data *d, unsigned int type) ++{ ++ struct gpio_chip *gc = irq_data_get_irq_chip_data(d); ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ irq_hw_number_t hwirq = irqd_to_hwirq(d); ++ struct device *dev = &mcu->client->dev; ++ u8 bit = omnia_gpios[hwirq].int_bit; ++ ++ if (!(type & IRQ_TYPE_EDGE_BOTH)) { ++ dev_err(dev, "irq %u: unsupported type %u\n", d->irq, type); ++ return -EINVAL; ++ } ++ ++ __assign_bit(bit, &mcu->rising, type & IRQ_TYPE_EDGE_RISING); ++ __assign_bit(bit, &mcu->falling, type & IRQ_TYPE_EDGE_FALLING); ++ ++ return 0; ++} ++ ++static void omnia_irq_bus_lock(struct irq_data *d) ++{ ++ struct gpio_chip *gc = irq_data_get_irq_chip_data(d); ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ ++ /* nothing to do if MCU firmware does not support new interrupt API */ ++ if (!(mcu->features & OMNIA_FEAT_NEW_INT_API)) ++ return; ++ ++ mutex_lock(&mcu->lock); ++} ++ ++/** ++ * omnia_mask_interleave - Interleaves the bytes from @rising and @falling ++ * @dst: the destination u8 array of interleaved bytes ++ * @rising: rising mask ++ * @falling: falling mask ++ * ++ * Interleaves the little-endian bytes from @rising and @falling words. ++ * ++ * If @rising = (r0, r1, r2, r3) and @falling = (f0, f1, f2, f3), the result is ++ * @dst = (r0, f0, r1, f1, r2, f2, r3, f3). ++ * ++ * The MCU receives an interrupt mask and reports a pending interrupt bitmap in ++ * this interleaved format. The rationale behind this is that the low-indexed ++ * bits are more important - in many cases, the user will be interested only in ++ * interrupts with indexes 0 to 7, and so the system can stop reading after ++ * first 2 bytes (r0, f0), to save time on the slow I2C bus. ++ * ++ * Feel free to remove this function and its inverse, omnia_mask_deinterleave, ++ * and use an appropriate bitmap_*() function once such a function exists. ++ */ ++static void ++omnia_mask_interleave(u8 *dst, unsigned long rising, unsigned long falling) ++{ ++ for (unsigned int i = 0; i < sizeof(u32); i++) { ++ dst[2 * i] = rising >> (8 * i); ++ dst[2 * i + 1] = falling >> (8 * i); ++ } ++} ++ ++/** ++ * omnia_mask_deinterleave - Deinterleaves the bytes into @rising and @falling ++ * @src: the source u8 array containing the interleaved bytes ++ * @rising: pointer where to store the rising mask gathered from @src ++ * @falling: pointer where to store the falling mask gathered from @src ++ * ++ * This is the inverse function to omnia_mask_interleave. ++ */ ++static void omnia_mask_deinterleave(const u8 *src, unsigned long *rising, ++ unsigned long *falling) ++{ ++ *rising = *falling = 0; ++ ++ for (unsigned int i = 0; i < sizeof(u32); i++) { ++ *rising |= src[2 * i] << (8 * i); ++ *falling |= src[2 * i + 1] << (8 * i); ++ } ++} ++ ++static void omnia_irq_bus_sync_unlock(struct irq_data *d) ++{ ++ struct gpio_chip *gc = irq_data_get_irq_chip_data(d); ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ struct device *dev = &mcu->client->dev; ++ u8 cmd[1 + OMNIA_CMD_INT_ARG_LEN]; ++ unsigned long rising, falling; ++ int err; ++ ++ /* nothing to do if MCU firmware does not support new interrupt API */ ++ if (!(mcu->features & OMNIA_FEAT_NEW_INT_API)) ++ return; ++ ++ cmd[0] = OMNIA_CMD_SET_INT_MASK; ++ ++ rising = mcu->rising & mcu->mask; ++ falling = mcu->falling & mcu->mask; ++ ++ /* interleave the rising and falling bytes into the command arguments */ ++ omnia_mask_interleave(&cmd[1], rising, falling); ++ ++ dev_dbg(dev, "set int mask %8ph\n", &cmd[1]); ++ ++ err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd)); ++ if (err) { ++ dev_err(dev, "Cannot set mask: %d\n", err); ++ goto unlock; ++ } ++ ++ /* ++ * Remember which GPIOs have both rising and falling interrupts enabled. ++ * For those we will cache their value so that .get() method is faster. ++ * We also need to forget cached values of GPIOs that aren't cached ++ * anymore. ++ */ ++ mcu->both = rising & falling; ++ mcu->is_cached &= mcu->both; ++ ++unlock: ++ mutex_unlock(&mcu->lock); ++} ++ ++static const struct irq_chip omnia_mcu_irq_chip = { ++ .name = "Turris Omnia MCU interrupts", ++ .irq_shutdown = omnia_irq_shutdown, ++ .irq_mask = omnia_irq_mask, ++ .irq_unmask = omnia_irq_unmask, ++ .irq_set_type = omnia_irq_set_type, ++ .irq_bus_lock = omnia_irq_bus_lock, ++ .irq_bus_sync_unlock = omnia_irq_bus_sync_unlock, ++ .flags = IRQCHIP_IMMUTABLE, ++ GPIOCHIP_IRQ_RESOURCE_HELPERS, ++}; ++ ++static void omnia_irq_init_valid_mask(struct gpio_chip *gc, ++ unsigned long *valid_mask, ++ unsigned int ngpios) ++{ ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ ++ for (unsigned int i = 0; i < ngpios; i++) { ++ const struct omnia_gpio *gpio = &omnia_gpios[i]; ++ ++ if (is_int_bit_valid(gpio)) ++ __assign_bit(i, valid_mask, ++ omnia_gpio_available(mcu, gpio)); ++ else ++ __clear_bit(i, valid_mask); ++ } ++} ++ ++static int omnia_irq_init_hw(struct gpio_chip *gc) ++{ ++ struct omnia_mcu *mcu = gpiochip_get_data(gc); ++ u8 cmd[1 + OMNIA_CMD_INT_ARG_LEN] = {}; ++ ++ cmd[0] = OMNIA_CMD_SET_INT_MASK; ++ ++ return omnia_cmd_write(mcu->client, cmd, sizeof(cmd)); ++} ++ ++/* ++ * Determine how many bytes we need to read from the reply to the ++ * OMNIA_CMD_GET_INT_AND_CLEAR command in order to retrieve all unmasked ++ * interrupts. ++ */ ++static unsigned int ++omnia_irq_compute_pending_length(unsigned long rising, unsigned long falling) ++{ ++ return max(omnia_compute_reply_length(rising, true, 0), ++ omnia_compute_reply_length(falling, true, 1)); ++} ++ ++static bool omnia_irq_read_pending_new(struct omnia_mcu *mcu, ++ unsigned long *pending) ++{ ++ struct device *dev = &mcu->client->dev; ++ u8 reply[OMNIA_CMD_INT_ARG_LEN] = {}; ++ unsigned long rising, falling; ++ unsigned int len; ++ int err; ++ ++ len = omnia_irq_compute_pending_length(mcu->rising & mcu->mask, ++ mcu->falling & mcu->mask); ++ if (!len) ++ return false; ++ ++ guard(mutex)(&mcu->lock); ++ ++ err = omnia_cmd_read(mcu->client, OMNIA_CMD_GET_INT_AND_CLEAR, reply, ++ len); ++ if (err) { ++ dev_err(dev, "Cannot read pending IRQs: %d\n", err); ++ return false; ++ } ++ ++ /* deinterleave the reply bytes into rising and falling */ ++ omnia_mask_deinterleave(reply, &rising, &falling); ++ ++ rising &= mcu->mask; ++ falling &= mcu->mask; ++ *pending = rising | falling; ++ ++ /* cache values for GPIOs that have both edges enabled */ ++ mcu->is_cached &= ~(rising & falling); ++ mcu->is_cached |= mcu->both & (rising ^ falling); ++ mcu->cached = (mcu->cached | rising) & ~falling; ++ ++ return true; ++} ++ ++static int omnia_read_status_word_old_fw(struct omnia_mcu *mcu, ++ unsigned long *status) ++{ ++ u16 raw_status; ++ int err; ++ ++ err = omnia_cmd_read_u16(mcu->client, OMNIA_CMD_GET_STATUS_WORD, ++ &raw_status); ++ if (err) ++ return err; ++ ++ /* ++ * Old firmware has a bug wherein it never resets the USB port ++ * overcurrent bits back to zero. Ignore them. ++ */ ++ *status = raw_status & ~(OMNIA_STS_USB30_OVC | OMNIA_STS_USB31_OVC); ++ ++ return 0; ++} ++ ++static void button_release_emul_fn(struct work_struct *work) ++{ ++ struct omnia_mcu *mcu = container_of(to_delayed_work(work), ++ struct omnia_mcu, ++ button_release_emul_work); ++ ++ mcu->button_pressed_emul = false; ++ generic_handle_irq_safe(mcu->client->irq); ++} ++ ++static void ++fill_int_from_sts(unsigned long *rising, unsigned long *falling, ++ unsigned long rising_sts, unsigned long falling_sts, ++ unsigned long sts_bit, unsigned long int_bit) ++{ ++ if (rising_sts & sts_bit) ++ *rising |= int_bit; ++ if (falling_sts & sts_bit) ++ *falling |= int_bit; ++} ++ ++static bool omnia_irq_read_pending_old(struct omnia_mcu *mcu, ++ unsigned long *pending) ++{ ++ unsigned long status, rising_sts, falling_sts, rising, falling; ++ struct device *dev = &mcu->client->dev; ++ int err; ++ ++ guard(mutex)(&mcu->lock); ++ ++ err = omnia_read_status_word_old_fw(mcu, &status); ++ if (err) { ++ dev_err(dev, "Cannot read pending IRQs: %d\n", err); ++ return false; ++ } ++ ++ /* ++ * The old firmware triggers an interrupt whenever status word changes, ++ * but does not inform about which bits rose or fell. We need to compute ++ * this here by comparing with the last status word value. ++ * ++ * The OMNIA_STS_BUTTON_PRESSED bit needs special handling, because the ++ * old firmware clears the OMNIA_STS_BUTTON_PRESSED bit on successful ++ * completion of the OMNIA_CMD_GET_STATUS_WORD command, resulting in ++ * another interrupt: ++ * - first we get an interrupt, we read the status word where ++ * OMNIA_STS_BUTTON_PRESSED is present, ++ * - MCU clears the OMNIA_STS_BUTTON_PRESSED bit because we read the ++ * status word, ++ * - we get another interrupt because the status word changed again ++ * (the OMNIA_STS_BUTTON_PRESSED bit was cleared). ++ * ++ * The gpiolib-cdev, gpiolib-sysfs and gpio-keys input driver all call ++ * the gpiochip's .get() method after an edge event on a requested GPIO ++ * occurs. ++ * ++ * We ensure that the .get() method reads 1 for the button GPIO for some ++ * time. ++ */ ++ ++ if (status & OMNIA_STS_BUTTON_PRESSED) { ++ mcu->button_pressed_emul = true; ++ mod_delayed_work(system_wq, &mcu->button_release_emul_work, ++ msecs_to_jiffies(FRONT_BUTTON_RELEASE_DELAY_MS)); ++ } else if (mcu->button_pressed_emul) { ++ status |= OMNIA_STS_BUTTON_PRESSED; ++ } ++ ++ rising_sts = ~mcu->last_status & status; ++ falling_sts = mcu->last_status & ~status; ++ ++ mcu->last_status = status; ++ ++ /* ++ * Fill in the relevant interrupt bits from status bits for CARD_DET, ++ * MSATA_IND and BUTTON_PRESSED. ++ */ ++ rising = 0; ++ falling = 0; ++ fill_int_from_sts(&rising, &falling, rising_sts, falling_sts, ++ OMNIA_STS_CARD_DET, OMNIA_INT_CARD_DET); ++ fill_int_from_sts(&rising, &falling, rising_sts, falling_sts, ++ OMNIA_STS_MSATA_IND, OMNIA_INT_MSATA_IND); ++ fill_int_from_sts(&rising, &falling, rising_sts, falling_sts, ++ OMNIA_STS_BUTTON_PRESSED, OMNIA_INT_BUTTON_PRESSED); ++ ++ /* Use only bits that are enabled */ ++ rising &= mcu->rising & mcu->mask; ++ falling &= mcu->falling & mcu->mask; ++ *pending = rising | falling; ++ ++ return true; ++} ++ ++static bool omnia_irq_read_pending(struct omnia_mcu *mcu, ++ unsigned long *pending) ++{ ++ if (mcu->features & OMNIA_FEAT_NEW_INT_API) ++ return omnia_irq_read_pending_new(mcu, pending); ++ else ++ return omnia_irq_read_pending_old(mcu, pending); ++} ++ ++static irqreturn_t omnia_irq_thread_handler(int irq, void *dev_id) ++{ ++ struct omnia_mcu *mcu = dev_id; ++ struct irq_domain *domain; ++ unsigned long pending; ++ unsigned int i; ++ ++ if (!omnia_irq_read_pending(mcu, &pending)) ++ return IRQ_NONE; ++ ++ domain = mcu->gc.irq.domain; ++ ++ for_each_set_bit(i, &pending, 32) { ++ unsigned int nested_irq; ++ ++ nested_irq = irq_find_mapping(domain, omnia_int_to_gpio_idx[i]); ++ ++ handle_nested_irq(nested_irq); ++ } ++ ++ return IRQ_RETVAL(pending); ++} ++ ++static const char * const front_button_modes[] = { "mcu", "cpu" }; ++ ++static ssize_t front_button_mode_show(struct device *dev, ++ struct device_attribute *a, char *buf) ++{ ++ struct omnia_mcu *mcu = dev_get_drvdata(dev); ++ int val; ++ ++ if (mcu->features & OMNIA_FEAT_NEW_INT_API) { ++ val = omnia_cmd_read_bit(mcu->client, OMNIA_CMD_GET_STATUS_WORD, ++ OMNIA_STS_BUTTON_MODE); ++ if (val < 0) ++ return val; ++ } else { ++ val = !!(mcu->last_status & OMNIA_STS_BUTTON_MODE); ++ } ++ ++ return sysfs_emit(buf, "%s\n", front_button_modes[val]); ++} ++ ++static ssize_t front_button_mode_store(struct device *dev, ++ struct device_attribute *a, ++ const char *buf, size_t count) ++{ ++ struct omnia_mcu *mcu = dev_get_drvdata(dev); ++ int err, i; ++ ++ i = sysfs_match_string(front_button_modes, buf); ++ if (i < 0) ++ return i; ++ ++ err = omnia_ctl_cmd_locked(mcu, OMNIA_CMD_GENERAL_CONTROL, ++ i ? OMNIA_CTL_BUTTON_MODE : 0, ++ OMNIA_CTL_BUTTON_MODE); ++ if (err) ++ return err; ++ ++ return count; ++} ++static DEVICE_ATTR_RW(front_button_mode); ++ ++static struct attribute *omnia_mcu_gpio_attrs[] = { ++ &dev_attr_front_button_mode.attr, ++ NULL ++}; ++ ++const struct attribute_group omnia_mcu_gpio_group = { ++ .attrs = omnia_mcu_gpio_attrs, ++}; ++ ++int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu) ++{ ++ bool new_api = mcu->features & OMNIA_FEAT_NEW_INT_API; ++ struct device *dev = &mcu->client->dev; ++ unsigned long irqflags; ++ int err; ++ ++ err = devm_mutex_init(dev, &mcu->lock); ++ if (err) ++ return err; ++ ++ mcu->gc.request = omnia_gpio_request; ++ mcu->gc.get_direction = omnia_gpio_get_direction; ++ mcu->gc.direction_input = omnia_gpio_direction_input; ++ mcu->gc.direction_output = omnia_gpio_direction_output; ++ mcu->gc.get = omnia_gpio_get; ++ mcu->gc.get_multiple = omnia_gpio_get_multiple; ++ mcu->gc.set = omnia_gpio_set; ++ mcu->gc.set_multiple = omnia_gpio_set_multiple; ++ mcu->gc.init_valid_mask = omnia_gpio_init_valid_mask; ++ mcu->gc.can_sleep = true; ++ mcu->gc.names = omnia_mcu_gpio_templates; ++ mcu->gc.base = -1; ++ mcu->gc.ngpio = ARRAY_SIZE(omnia_gpios); ++ mcu->gc.label = "Turris Omnia MCU GPIOs"; ++ mcu->gc.parent = dev; ++ mcu->gc.owner = THIS_MODULE; ++ mcu->gc.of_gpio_n_cells = 3; ++ mcu->gc.of_xlate = omnia_gpio_of_xlate; ++ ++ gpio_irq_chip_set_chip(&mcu->gc.irq, &omnia_mcu_irq_chip); ++ /* This will let us handle the parent IRQ in the driver */ ++ mcu->gc.irq.parent_handler = NULL; ++ mcu->gc.irq.num_parents = 0; ++ mcu->gc.irq.parents = NULL; ++ mcu->gc.irq.default_type = IRQ_TYPE_NONE; ++ mcu->gc.irq.handler = handle_bad_irq; ++ mcu->gc.irq.threaded = true; ++ if (new_api) ++ mcu->gc.irq.init_hw = omnia_irq_init_hw; ++ mcu->gc.irq.init_valid_mask = omnia_irq_init_valid_mask; ++ ++ err = devm_gpiochip_add_data(dev, &mcu->gc, mcu); ++ if (err) ++ return dev_err_probe(dev, err, "Cannot add GPIO chip\n"); ++ ++ /* ++ * Before requesting the interrupt, if firmware does not support the new ++ * interrupt API, we need to cache the value of the status word, so that ++ * when it changes, we may compare the new value with the cached one in ++ * the interrupt handler. ++ */ ++ if (!new_api) { ++ err = omnia_read_status_word_old_fw(mcu, &mcu->last_status); ++ if (err) ++ return dev_err_probe(dev, err, ++ "Cannot read status word\n"); ++ ++ INIT_DELAYED_WORK(&mcu->button_release_emul_work, ++ button_release_emul_fn); ++ } ++ ++ irqflags = IRQF_ONESHOT; ++ if (new_api) ++ irqflags |= IRQF_TRIGGER_LOW; ++ else ++ irqflags |= IRQF_TRIGGER_FALLING; ++ ++ err = devm_request_threaded_irq(dev, mcu->client->irq, NULL, ++ omnia_irq_thread_handler, irqflags, ++ "turris-omnia-mcu", mcu); ++ if (err) ++ return dev_err_probe(dev, err, "Cannot request IRQ\n"); ++ ++ if (!new_api) { ++ /* ++ * The button_release_emul_work has to be initialized before the ++ * thread is requested, and on driver remove it needs to be ++ * canceled before the thread is freed. Therefore we can't use ++ * devm_delayed_work_autocancel() directly, because the order ++ * devm_delayed_work_autocancel(); ++ * devm_request_threaded_irq(); ++ * would cause improper release order: ++ * free_irq(); ++ * cancel_delayed_work_sync(); ++ * Instead we first initialize the work above, and only now ++ * after IRQ is requested we add the work devm action. ++ */ ++ err = devm_add_action(dev, devm_delayed_work_drop, ++ &mcu->button_release_emul_work); ++ if (err) ++ return err; ++ } ++ ++ return 0; ++} +--- a/drivers/platform/cznic/turris-omnia-mcu.h ++++ b/drivers/platform/cznic/turris-omnia-mcu.h +@@ -8,8 +8,12 @@ + #ifndef __TURRIS_OMNIA_MCU_H + #define __TURRIS_OMNIA_MCU_H + ++#include ++#include + #include ++#include + #include ++#include + #include + + struct i2c_client; +@@ -23,18 +27,78 @@ struct omnia_mcu { + u64 board_serial_number; + u8 board_first_mac[ETH_ALEN]; + u8 board_revision; ++ ++ /* GPIO chip */ ++ struct gpio_chip gc; ++ struct mutex lock; ++ unsigned long mask, rising, falling, both, cached, is_cached; ++ /* Old MCU firmware handling needs the following */ ++ struct delayed_work button_release_emul_work; ++ unsigned long last_status; ++ bool button_pressed_emul; + }; + + int omnia_cmd_write_read(const struct i2c_client *client, + void *cmd, unsigned int cmd_len, + void *reply, unsigned int reply_len); + ++static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd, ++ unsigned int len) ++{ ++ return omnia_cmd_write_read(client, cmd, len, NULL, 0); ++} ++ + static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd, + void *reply, unsigned int len) + { + return omnia_cmd_write_read(client, &cmd, 1, reply, len); + } + ++static inline unsigned int ++omnia_compute_reply_length(unsigned long mask, bool interleaved, ++ unsigned int offset) ++{ ++ if (!mask) ++ return 0; ++ ++ return ((__fls(mask) >> 3) << interleaved) + 1 + offset; ++} ++ ++/* Returns 0 on success */ ++static inline int omnia_cmd_read_bits(const struct i2c_client *client, u8 cmd, ++ unsigned long bits, unsigned long *dst) ++{ ++ __le32 reply; ++ int err; ++ ++ if (!bits) { ++ *dst = 0; ++ return 0; ++ } ++ ++ err = omnia_cmd_read(client, cmd, &reply, ++ omnia_compute_reply_length(bits, false, 0)); ++ if (err) ++ return err; ++ ++ *dst = le32_to_cpu(reply) & bits; ++ ++ return 0; ++} ++ ++static inline int omnia_cmd_read_bit(const struct i2c_client *client, u8 cmd, ++ unsigned long bit) ++{ ++ unsigned long reply; ++ int err; ++ ++ err = omnia_cmd_read_bits(client, cmd, bit, &reply); ++ if (err) ++ return err; ++ ++ return !!reply; ++} ++ + static inline int omnia_cmd_read_u32(const struct i2c_client *client, u8 cmd, + u32 *dst) + { +@@ -71,4 +135,8 @@ static inline int omnia_cmd_read_u8(cons + return omnia_cmd_read(client, cmd, reply, sizeof(*reply)); + } + ++extern const struct attribute_group omnia_mcu_gpio_group; ++ ++int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu); ++ + #endif /* __TURRIS_OMNIA_MCU_H */ diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-04-platform-cznic-turris-omnia-mcu-Add-support-for-powe.patch b/target/linux/mvebu/patches-6.6/820-v6.11-04-platform-cznic-turris-omnia-mcu-Add-support-for-powe.patch new file mode 100644 index 0000000000..2ef6242d70 --- /dev/null +++ b/target/linux/mvebu/patches-6.6/820-v6.11-04-platform-cznic-turris-omnia-mcu-Add-support-for-powe.patch @@ -0,0 +1,415 @@ +From f69e0a731ab471f3a57c48258ad2d9990820c173 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 1 Jul 2024 13:30:06 +0200 +Subject: [PATCH 04/11] platform: cznic: turris-omnia-mcu: Add support for + poweroff and wakeup +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add support for true board poweroff (MCU can disable all unnecessary +voltage regulators) and wakeup at a specified time, implemented via a +RTC driver so that the rtcwake utility can be used to configure it. + +Signed-off-by: Marek Behún +Reviewed-by: Andy Shevchenko +Acked-by: Alexandre Belloni +Acked-by: Bartosz Golaszewski +Link: https://lore.kernel.org/r/20240701113010.16447-5-kabel@kernel.org +Signed-off-by: Arnd Bergmann +--- + .../sysfs-bus-i2c-devices-turris-omnia-mcu | 16 ++ + drivers/platform/cznic/Kconfig | 4 + + drivers/platform/cznic/Makefile | 1 + + .../platform/cznic/turris-omnia-mcu-base.c | 5 + + .../cznic/turris-omnia-mcu-sys-off-wakeup.c | 260 ++++++++++++++++++ + drivers/platform/cznic/turris-omnia-mcu.h | 20 ++ + 6 files changed, 306 insertions(+) + create mode 100644 drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c + +--- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu ++++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu +@@ -38,6 +38,22 @@ Description: (RW) The front button on th + + Format: %s. + ++What: /sys/bus/i2c/devices//front_button_poweron ++Date: September 2024 ++KernelVersion: 6.11 ++Contact: Marek Behún ++Description: (RW) Newer versions of the microcontroller firmware of the ++ Turris Omnia router support powering off the router into true ++ low power mode. The router can be powered on by pressing the ++ front button. ++ ++ This file configures whether front button power on is enabled. ++ ++ This file is present only if the power off feature is supported ++ by the firmware. ++ ++ Format: %i. ++ + What: /sys/bus/i2c/devices//fw_features + Date: September 2024 + KernelVersion: 6.11 +--- a/drivers/platform/cznic/Kconfig ++++ b/drivers/platform/cznic/Kconfig +@@ -18,10 +18,14 @@ config TURRIS_OMNIA_MCU + depends on I2C + select GPIOLIB + select GPIOLIB_IRQCHIP ++ select RTC_CLASS + help + Say Y here to add support for the features implemented by the + microcontroller on the CZ.NIC's Turris Omnia SOHO router. + The features include: ++ - board poweroff into true low power mode (with voltage regulators ++ disabled) and the ability to configure wake up from this mode (via ++ rtcwake) + - GPIO pins + - to get front button press events (the front button can be + configured either to generate press events to the CPU or to change +--- a/drivers/platform/cznic/Makefile ++++ b/drivers/platform/cznic/Makefile +@@ -3,3 +3,4 @@ + obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o + turris-omnia-mcu-y := turris-omnia-mcu-base.o + turris-omnia-mcu-y += turris-omnia-mcu-gpio.o ++turris-omnia-mcu-y += turris-omnia-mcu-sys-off-wakeup.o +--- a/drivers/platform/cznic/turris-omnia-mcu-base.c ++++ b/drivers/platform/cznic/turris-omnia-mcu-base.c +@@ -197,6 +197,7 @@ static const struct attribute_group omni + static const struct attribute_group *omnia_mcu_groups[] = { + &omnia_mcu_base_group, + &omnia_mcu_gpio_group, ++ &omnia_mcu_poweroff_group, + NULL + }; + +@@ -371,6 +372,10 @@ static int omnia_mcu_probe(struct i2c_cl + "Cannot read board info\n"); + } + ++ err = omnia_mcu_register_sys_off_and_wakeup(mcu); ++ if (err) ++ return err; ++ + return omnia_mcu_register_gpiochip(mcu); + } + +--- /dev/null ++++ b/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c +@@ -0,0 +1,260 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * CZ.NIC's Turris Omnia MCU system off and RTC wakeup driver ++ * ++ * This is not a true RTC driver (in the sense that it does not provide a ++ * real-time clock), rather the MCU implements a wakeup from powered off state ++ * at a specified time relative to MCU boot, and we expose this feature via RTC ++ * alarm, so that it can be used via the rtcwake command, which is the standard ++ * Linux command for this. ++ * ++ * 2024 by Marek Behún ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include "turris-omnia-mcu.h" ++ ++static int omnia_get_uptime_wakeup(const struct i2c_client *client, u32 *uptime, ++ u32 *wakeup) ++{ ++ __le32 reply[2]; ++ int err; ++ ++ err = omnia_cmd_read(client, OMNIA_CMD_GET_UPTIME_AND_WAKEUP, reply, ++ sizeof(reply)); ++ if (err) ++ return err; ++ ++ if (uptime) ++ *uptime = le32_to_cpu(reply[0]); ++ ++ if (wakeup) ++ *wakeup = le32_to_cpu(reply[1]); ++ ++ return 0; ++} ++ ++static int omnia_read_time(struct device *dev, struct rtc_time *tm) ++{ ++ u32 uptime; ++ int err; ++ ++ err = omnia_get_uptime_wakeup(to_i2c_client(dev), &uptime, NULL); ++ if (err) ++ return err; ++ ++ rtc_time64_to_tm(uptime, tm); ++ ++ return 0; ++} ++ ++static int omnia_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) ++{ ++ struct i2c_client *client = to_i2c_client(dev); ++ struct omnia_mcu *mcu = i2c_get_clientdata(client); ++ u32 wakeup; ++ int err; ++ ++ err = omnia_get_uptime_wakeup(client, NULL, &wakeup); ++ if (err) ++ return err; ++ ++ alrm->enabled = !!wakeup; ++ rtc_time64_to_tm(wakeup ?: mcu->rtc_alarm, &alrm->time); ++ ++ return 0; ++} ++ ++static int omnia_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) ++{ ++ struct i2c_client *client = to_i2c_client(dev); ++ struct omnia_mcu *mcu = i2c_get_clientdata(client); ++ ++ mcu->rtc_alarm = rtc_tm_to_time64(&alrm->time); ++ ++ if (alrm->enabled) ++ return omnia_cmd_write_u32(client, OMNIA_CMD_SET_WAKEUP, ++ mcu->rtc_alarm); ++ ++ return 0; ++} ++ ++static int omnia_alarm_irq_enable(struct device *dev, unsigned int enabled) ++{ ++ struct i2c_client *client = to_i2c_client(dev); ++ struct omnia_mcu *mcu = i2c_get_clientdata(client); ++ ++ return omnia_cmd_write_u32(client, OMNIA_CMD_SET_WAKEUP, ++ enabled ? mcu->rtc_alarm : 0); ++} ++ ++static const struct rtc_class_ops omnia_rtc_ops = { ++ .read_time = omnia_read_time, ++ .read_alarm = omnia_read_alarm, ++ .set_alarm = omnia_set_alarm, ++ .alarm_irq_enable = omnia_alarm_irq_enable, ++}; ++ ++static int omnia_power_off(struct sys_off_data *data) ++{ ++ struct omnia_mcu *mcu = data->cb_data; ++ __be32 tmp; ++ u8 cmd[9]; ++ u16 arg; ++ int err; ++ ++ if (mcu->front_button_poweron) ++ arg = OMNIA_CMD_POWER_OFF_POWERON_BUTTON; ++ else ++ arg = 0; ++ ++ cmd[0] = OMNIA_CMD_POWER_OFF; ++ put_unaligned_le16(OMNIA_CMD_POWER_OFF_MAGIC, &cmd[1]); ++ put_unaligned_le16(arg, &cmd[3]); ++ ++ /* ++ * Although all values from and to MCU are passed in little-endian, the ++ * MCU's CRC unit uses big-endian CRC32 polynomial (0x04c11db7), so we ++ * need to use crc32_be() here. ++ */ ++ tmp = cpu_to_be32(get_unaligned_le32(&cmd[1])); ++ put_unaligned_le32(crc32_be(~0, (void *)&tmp, sizeof(tmp)), &cmd[5]); ++ ++ err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd)); ++ if (err) ++ dev_err(&mcu->client->dev, ++ "Unable to send the poweroff command: %d\n", err); ++ ++ return NOTIFY_DONE; ++} ++ ++static int omnia_restart(struct sys_off_data *data) ++{ ++ struct omnia_mcu *mcu = data->cb_data; ++ u8 cmd[3]; ++ int err; ++ ++ cmd[0] = OMNIA_CMD_GENERAL_CONTROL; ++ ++ if (reboot_mode == REBOOT_HARD) ++ cmd[1] = cmd[2] = OMNIA_CTL_HARD_RST; ++ else ++ cmd[1] = cmd[2] = OMNIA_CTL_LIGHT_RST; ++ ++ err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd)); ++ if (err) ++ dev_err(&mcu->client->dev, ++ "Unable to send the restart command: %d\n", err); ++ ++ /* ++ * MCU needs a little bit to process the I2C command, otherwise it will ++ * do a light reset based on SOC SYSRES_OUT pin. ++ */ ++ mdelay(1); ++ ++ return NOTIFY_DONE; ++} ++ ++static ssize_t front_button_poweron_show(struct device *dev, ++ struct device_attribute *a, char *buf) ++{ ++ struct omnia_mcu *mcu = dev_get_drvdata(dev); ++ ++ return sysfs_emit(buf, "%d\n", mcu->front_button_poweron); ++} ++ ++static ssize_t front_button_poweron_store(struct device *dev, ++ struct device_attribute *a, ++ const char *buf, size_t count) ++{ ++ struct omnia_mcu *mcu = dev_get_drvdata(dev); ++ bool val; ++ int err; ++ ++ err = kstrtobool(buf, &val); ++ if (err) ++ return err; ++ ++ mcu->front_button_poweron = val; ++ ++ return count; ++} ++static DEVICE_ATTR_RW(front_button_poweron); ++ ++static struct attribute *omnia_mcu_poweroff_attrs[] = { ++ &dev_attr_front_button_poweron.attr, ++ NULL ++}; ++ ++static umode_t poweroff_attrs_visible(struct kobject *kobj, struct attribute *a, ++ int n) ++{ ++ struct device *dev = kobj_to_dev(kobj); ++ struct omnia_mcu *mcu = dev_get_drvdata(dev); ++ ++ if (mcu->features & OMNIA_FEAT_POWEROFF_WAKEUP) ++ return a->mode; ++ ++ return 0; ++} ++ ++const struct attribute_group omnia_mcu_poweroff_group = { ++ .attrs = omnia_mcu_poweroff_attrs, ++ .is_visible = poweroff_attrs_visible, ++}; ++ ++int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu) ++{ ++ struct device *dev = &mcu->client->dev; ++ int err; ++ ++ /* MCU restart is always available */ ++ err = devm_register_sys_off_handler(dev, SYS_OFF_MODE_RESTART, ++ SYS_OFF_PRIO_FIRMWARE, ++ omnia_restart, mcu); ++ if (err) ++ return dev_err_probe(dev, err, ++ "Cannot register system restart handler\n"); ++ ++ /* ++ * Poweroff and wakeup are available only if POWEROFF_WAKEUP feature is ++ * present. ++ */ ++ if (!(mcu->features & OMNIA_FEAT_POWEROFF_WAKEUP)) ++ return 0; ++ ++ err = devm_register_sys_off_handler(dev, SYS_OFF_MODE_POWER_OFF, ++ SYS_OFF_PRIO_FIRMWARE, ++ omnia_power_off, mcu); ++ if (err) ++ return dev_err_probe(dev, err, ++ "Cannot register system power off handler\n"); ++ ++ mcu->rtcdev = devm_rtc_allocate_device(dev); ++ if (IS_ERR(mcu->rtcdev)) ++ return dev_err_probe(dev, PTR_ERR(mcu->rtcdev), ++ "Cannot allocate RTC device\n"); ++ ++ mcu->rtcdev->ops = &omnia_rtc_ops; ++ mcu->rtcdev->range_max = U32_MAX; ++ set_bit(RTC_FEATURE_ALARM_WAKEUP_ONLY, mcu->rtcdev->features); ++ ++ err = devm_rtc_register_device(mcu->rtcdev); ++ if (err) ++ return dev_err_probe(dev, err, "Cannot register RTC device\n"); ++ ++ mcu->front_button_poweron = true; ++ ++ return 0; ++} +--- a/drivers/platform/cznic/turris-omnia-mcu.h ++++ b/drivers/platform/cznic/turris-omnia-mcu.h +@@ -15,8 +15,10 @@ + #include + #include + #include ++#include + + struct i2c_client; ++struct rtc_device; + + struct omnia_mcu { + struct i2c_client *client; +@@ -36,6 +38,11 @@ struct omnia_mcu { + struct delayed_work button_release_emul_work; + unsigned long last_status; + bool button_pressed_emul; ++ ++ /* RTC device for configuring wake-up */ ++ struct rtc_device *rtcdev; ++ u32 rtc_alarm; ++ bool front_button_poweron; + }; + + int omnia_cmd_write_read(const struct i2c_client *client, +@@ -48,6 +55,17 @@ static inline int omnia_cmd_write(const + return omnia_cmd_write_read(client, cmd, len, NULL, 0); + } + ++static inline int omnia_cmd_write_u32(const struct i2c_client *client, u8 cmd, ++ u32 val) ++{ ++ u8 buf[5]; ++ ++ buf[0] = cmd; ++ put_unaligned_le32(val, &buf[1]); ++ ++ return omnia_cmd_write(client, buf, sizeof(buf)); ++} ++ + static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd, + void *reply, unsigned int len) + { +@@ -136,7 +154,9 @@ static inline int omnia_cmd_read_u8(cons + } + + extern const struct attribute_group omnia_mcu_gpio_group; ++extern const struct attribute_group omnia_mcu_poweroff_group; + + int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu); ++int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu); + + #endif /* __TURRIS_OMNIA_MCU_H */ diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-05-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch b/target/linux/mvebu/patches-6.6/820-v6.11-05-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch new file mode 100644 index 0000000000..cf3f88bfcf --- /dev/null +++ b/target/linux/mvebu/patches-6.6/820-v6.11-05-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch @@ -0,0 +1,250 @@ +From 33ae4e4c86bc6ff298489fb8b743e2743dd0af6d Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 1 Jul 2024 13:30:07 +0200 +Subject: [PATCH 05/11] platform: cznic: turris-omnia-mcu: Add support for MCU + watchdog +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add support for the watchdog mechanism provided by the MCU. + +Signed-off-by: Marek Behún +Reviewed-by: Andy Shevchenko +Reviewed-by: Guenter Roeck +Acked-by: Bartosz Golaszewski +Link: https://lore.kernel.org/r/20240701113010.16447-6-kabel@kernel.org +Signed-off-by: Arnd Bergmann +--- + drivers/platform/cznic/Kconfig | 2 + + drivers/platform/cznic/Makefile | 1 + + .../platform/cznic/turris-omnia-mcu-base.c | 4 + + .../cznic/turris-omnia-mcu-watchdog.c | 130 ++++++++++++++++++ + drivers/platform/cznic/turris-omnia-mcu.h | 24 ++++ + 5 files changed, 161 insertions(+) + create mode 100644 drivers/platform/cznic/turris-omnia-mcu-watchdog.c + +--- a/drivers/platform/cznic/Kconfig ++++ b/drivers/platform/cznic/Kconfig +@@ -19,6 +19,7 @@ config TURRIS_OMNIA_MCU + select GPIOLIB + select GPIOLIB_IRQCHIP + select RTC_CLASS ++ select WATCHDOG_CORE + help + Say Y here to add support for the features implemented by the + microcontroller on the CZ.NIC's Turris Omnia SOHO router. +@@ -26,6 +27,7 @@ config TURRIS_OMNIA_MCU + - board poweroff into true low power mode (with voltage regulators + disabled) and the ability to configure wake up from this mode (via + rtcwake) ++ - MCU watchdog + - GPIO pins + - to get front button press events (the front button can be + configured either to generate press events to the CPU or to change +--- a/drivers/platform/cznic/Makefile ++++ b/drivers/platform/cznic/Makefile +@@ -4,3 +4,4 @@ obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris + turris-omnia-mcu-y := turris-omnia-mcu-base.o + turris-omnia-mcu-y += turris-omnia-mcu-gpio.o + turris-omnia-mcu-y += turris-omnia-mcu-sys-off-wakeup.o ++turris-omnia-mcu-y += turris-omnia-mcu-watchdog.o +--- a/drivers/platform/cznic/turris-omnia-mcu-base.c ++++ b/drivers/platform/cznic/turris-omnia-mcu-base.c +@@ -376,6 +376,10 @@ static int omnia_mcu_probe(struct i2c_cl + if (err) + return err; + ++ err = omnia_mcu_register_watchdog(mcu); ++ if (err) ++ return err; ++ + return omnia_mcu_register_gpiochip(mcu); + } + +--- /dev/null ++++ b/drivers/platform/cznic/turris-omnia-mcu-watchdog.c +@@ -0,0 +1,130 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * CZ.NIC's Turris Omnia MCU watchdog driver ++ * ++ * 2024 by Marek Behún ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include "turris-omnia-mcu.h" ++ ++#define WATCHDOG_TIMEOUT 120 ++ ++static unsigned int timeout; ++module_param(timeout, int, 0); ++MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds"); ++ ++static bool nowayout = WATCHDOG_NOWAYOUT; ++module_param(nowayout, bool, 0); ++MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" ++ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); ++ ++static int omnia_wdt_start(struct watchdog_device *wdt) ++{ ++ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt); ++ ++ return omnia_cmd_write_u8(mcu->client, OMNIA_CMD_SET_WATCHDOG_STATE, 1); ++} ++ ++static int omnia_wdt_stop(struct watchdog_device *wdt) ++{ ++ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt); ++ ++ return omnia_cmd_write_u8(mcu->client, OMNIA_CMD_SET_WATCHDOG_STATE, 0); ++} ++ ++static int omnia_wdt_ping(struct watchdog_device *wdt) ++{ ++ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt); ++ ++ return omnia_cmd_write_u8(mcu->client, OMNIA_CMD_SET_WATCHDOG_STATE, 1); ++} ++ ++static int omnia_wdt_set_timeout(struct watchdog_device *wdt, ++ unsigned int timeout) ++{ ++ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt); ++ ++ return omnia_cmd_write_u16(mcu->client, OMNIA_CMD_SET_WDT_TIMEOUT, ++ timeout * DECI); ++} ++ ++static unsigned int omnia_wdt_get_timeleft(struct watchdog_device *wdt) ++{ ++ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt); ++ u16 timeleft; ++ int err; ++ ++ err = omnia_cmd_read_u16(mcu->client, OMNIA_CMD_GET_WDT_TIMELEFT, ++ &timeleft); ++ if (err) { ++ dev_err(&mcu->client->dev, "Cannot get watchdog timeleft: %d\n", ++ err); ++ return 0; ++ } ++ ++ return timeleft / DECI; ++} ++ ++static const struct watchdog_info omnia_wdt_info = { ++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, ++ .identity = "Turris Omnia MCU Watchdog", ++}; ++ ++static const struct watchdog_ops omnia_wdt_ops = { ++ .owner = THIS_MODULE, ++ .start = omnia_wdt_start, ++ .stop = omnia_wdt_stop, ++ .ping = omnia_wdt_ping, ++ .set_timeout = omnia_wdt_set_timeout, ++ .get_timeleft = omnia_wdt_get_timeleft, ++}; ++ ++int omnia_mcu_register_watchdog(struct omnia_mcu *mcu) ++{ ++ struct device *dev = &mcu->client->dev; ++ u8 state; ++ int err; ++ ++ if (!(mcu->features & OMNIA_FEAT_WDT_PING)) ++ return 0; ++ ++ mcu->wdt.info = &omnia_wdt_info; ++ mcu->wdt.ops = &omnia_wdt_ops; ++ mcu->wdt.parent = dev; ++ mcu->wdt.min_timeout = 1; ++ mcu->wdt.max_timeout = 65535 / DECI; ++ ++ mcu->wdt.timeout = WATCHDOG_TIMEOUT; ++ watchdog_init_timeout(&mcu->wdt, timeout, dev); ++ ++ watchdog_set_drvdata(&mcu->wdt, mcu); ++ ++ omnia_wdt_set_timeout(&mcu->wdt, mcu->wdt.timeout); ++ ++ err = omnia_cmd_read_u8(mcu->client, OMNIA_CMD_GET_WATCHDOG_STATE, ++ &state); ++ if (err) ++ return dev_err_probe(dev, err, ++ "Cannot get MCU watchdog state\n"); ++ ++ if (state) ++ set_bit(WDOG_HW_RUNNING, &mcu->wdt.status); ++ ++ watchdog_set_nowayout(&mcu->wdt, nowayout); ++ watchdog_stop_on_reboot(&mcu->wdt); ++ err = devm_watchdog_register_device(dev, &mcu->wdt); ++ if (err) ++ return dev_err_probe(dev, err, ++ "Cannot register MCU watchdog\n"); ++ ++ return 0; ++} +--- a/drivers/platform/cznic/turris-omnia-mcu.h ++++ b/drivers/platform/cznic/turris-omnia-mcu.h +@@ -13,6 +13,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -43,6 +44,9 @@ struct omnia_mcu { + struct rtc_device *rtcdev; + u32 rtc_alarm; + bool front_button_poweron; ++ ++ /* MCU watchdog */ ++ struct watchdog_device wdt; + }; + + int omnia_cmd_write_read(const struct i2c_client *client, +@@ -55,6 +59,25 @@ static inline int omnia_cmd_write(const + return omnia_cmd_write_read(client, cmd, len, NULL, 0); + } + ++static inline int omnia_cmd_write_u8(const struct i2c_client *client, u8 cmd, ++ u8 val) ++{ ++ u8 buf[2] = { cmd, val }; ++ ++ return omnia_cmd_write(client, buf, sizeof(buf)); ++} ++ ++static inline int omnia_cmd_write_u16(const struct i2c_client *client, u8 cmd, ++ u16 val) ++{ ++ u8 buf[3]; ++ ++ buf[0] = cmd; ++ put_unaligned_le16(val, &buf[1]); ++ ++ return omnia_cmd_write(client, buf, sizeof(buf)); ++} ++ + static inline int omnia_cmd_write_u32(const struct i2c_client *client, u8 cmd, + u32 val) + { +@@ -158,5 +181,6 @@ extern const struct attribute_group omni + + int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu); + int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu); ++int omnia_mcu_register_watchdog(struct omnia_mcu *mcu); + + #endif /* __TURRIS_OMNIA_MCU_H */ diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-06-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch b/target/linux/mvebu/patches-6.6/820-v6.11-06-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch new file mode 100644 index 0000000000..35387e34c7 --- /dev/null +++ b/target/linux/mvebu/patches-6.6/820-v6.11-06-platform-cznic-turris-omnia-mcu-Add-support-for-MCU-.patch @@ -0,0 +1,225 @@ +From b3ed8645c45567b598bef0868dca166f8ed166a0 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 1 Jul 2024 13:30:08 +0200 +Subject: [PATCH 06/11] platform: cznic: turris-omnia-mcu: Add support for MCU + provided TRNG +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add support for true random number generator provided by the MCU. +New Omnia boards come without the Atmel SHA204-A chip. Instead the +crypto functionality is provided by new microcontroller, which has +a TRNG peripheral. + +Signed-off-by: Marek Behún +Acked-by: Bartosz Golaszewski +Link: https://lore.kernel.org/r/20240701113010.16447-7-kabel@kernel.org +Signed-off-by: Arnd Bergmann +--- + drivers/platform/cznic/Kconfig | 2 + + drivers/platform/cznic/Makefile | 1 + + .../platform/cznic/turris-omnia-mcu-base.c | 6 +- + .../platform/cznic/turris-omnia-mcu-gpio.c | 2 +- + .../platform/cznic/turris-omnia-mcu-trng.c | 105 ++++++++++++++++++ + drivers/platform/cznic/turris-omnia-mcu.h | 8 ++ + 6 files changed, 122 insertions(+), 2 deletions(-) + create mode 100644 drivers/platform/cznic/turris-omnia-mcu-trng.c + +--- a/drivers/platform/cznic/Kconfig ++++ b/drivers/platform/cznic/Kconfig +@@ -18,6 +18,7 @@ config TURRIS_OMNIA_MCU + depends on I2C + select GPIOLIB + select GPIOLIB_IRQCHIP ++ select HW_RANDOM + select RTC_CLASS + select WATCHDOG_CORE + help +@@ -27,6 +28,7 @@ config TURRIS_OMNIA_MCU + - board poweroff into true low power mode (with voltage regulators + disabled) and the ability to configure wake up from this mode (via + rtcwake) ++ - true random number generator (if available on the MCU) + - MCU watchdog + - GPIO pins + - to get front button press events (the front button can be +--- a/drivers/platform/cznic/Makefile ++++ b/drivers/platform/cznic/Makefile +@@ -4,4 +4,5 @@ obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris + turris-omnia-mcu-y := turris-omnia-mcu-base.o + turris-omnia-mcu-y += turris-omnia-mcu-gpio.o + turris-omnia-mcu-y += turris-omnia-mcu-sys-off-wakeup.o ++turris-omnia-mcu-y += turris-omnia-mcu-trng.o + turris-omnia-mcu-y += turris-omnia-mcu-watchdog.o +--- a/drivers/platform/cznic/turris-omnia-mcu-base.c ++++ b/drivers/platform/cznic/turris-omnia-mcu-base.c +@@ -380,7 +380,11 @@ static int omnia_mcu_probe(struct i2c_cl + if (err) + return err; + +- return omnia_mcu_register_gpiochip(mcu); ++ err = omnia_mcu_register_gpiochip(mcu); ++ if (err) ++ return err; ++ ++ return omnia_mcu_register_trng(mcu); + } + + static const struct of_device_id of_omnia_mcu_match[] = { +--- a/drivers/platform/cznic/turris-omnia-mcu-gpio.c ++++ b/drivers/platform/cznic/turris-omnia-mcu-gpio.c +@@ -194,7 +194,7 @@ static const struct omnia_gpio omnia_gpi + }; + + /* mapping from interrupts to indexes of GPIOs in the omnia_gpios array */ +-static const u8 omnia_int_to_gpio_idx[32] = { ++const u8 omnia_int_to_gpio_idx[32] = { + [__bf_shf(OMNIA_INT_CARD_DET)] = 4, + [__bf_shf(OMNIA_INT_MSATA_IND)] = 5, + [__bf_shf(OMNIA_INT_USB30_OVC)] = 6, +--- /dev/null ++++ b/drivers/platform/cznic/turris-omnia-mcu-trng.c +@@ -0,0 +1,105 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * CZ.NIC's Turris Omnia MCU TRNG driver ++ * ++ * 2024 by Marek Behún ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../../gpio/gpiolib.h" ++ ++#include ++#include "turris-omnia-mcu.h" ++ ++#define OMNIA_CMD_TRNG_MAX_ENTROPY_LEN 64 ++ ++static irqreturn_t omnia_trng_irq_handler(int irq, void *dev_id) ++{ ++ struct omnia_mcu *mcu = dev_id; ++ ++ complete(&mcu->trng_entropy_ready); ++ ++ return IRQ_HANDLED; ++} ++ ++static int omnia_trng_read(struct hwrng *rng, void *data, size_t max, bool wait) ++{ ++ struct omnia_mcu *mcu = container_of(rng, struct omnia_mcu, trng); ++ u8 reply[1 + OMNIA_CMD_TRNG_MAX_ENTROPY_LEN]; ++ int err, bytes; ++ ++ if (!wait && !completion_done(&mcu->trng_entropy_ready)) ++ return 0; ++ ++ do { ++ if (wait_for_completion_interruptible(&mcu->trng_entropy_ready)) ++ return -ERESTARTSYS; ++ ++ err = omnia_cmd_read(mcu->client, ++ OMNIA_CMD_TRNG_COLLECT_ENTROPY, ++ reply, sizeof(reply)); ++ if (err) ++ return err; ++ ++ bytes = min3(reply[0], max, OMNIA_CMD_TRNG_MAX_ENTROPY_LEN); ++ } while (wait && !bytes); ++ ++ memcpy(data, &reply[1], bytes); ++ ++ return bytes; ++} ++ ++int omnia_mcu_register_trng(struct omnia_mcu *mcu) ++{ ++ struct device *dev = &mcu->client->dev; ++ u8 irq_idx, dummy; ++ int irq, err; ++ ++ if (!(mcu->features & OMNIA_FEAT_TRNG)) ++ return 0; ++ ++ irq_idx = omnia_int_to_gpio_idx[__bf_shf(OMNIA_INT_TRNG)]; ++ irq = gpiod_to_irq(gpiochip_get_desc(&mcu->gc, irq_idx)); ++ if (!irq) ++ return dev_err_probe(dev, -ENXIO, "Cannot get TRNG IRQ\n"); ++ ++ /* ++ * If someone else cleared the TRNG interrupt but did not read the ++ * entropy, a new interrupt won't be generated, and entropy collection ++ * will be stuck. Ensure an interrupt will be generated by executing ++ * the collect entropy command (and discarding the result). ++ */ ++ err = omnia_cmd_read(mcu->client, OMNIA_CMD_TRNG_COLLECT_ENTROPY, ++ &dummy, 1); ++ if (err) ++ return err; ++ ++ init_completion(&mcu->trng_entropy_ready); ++ ++ err = devm_request_threaded_irq(dev, irq, NULL, omnia_trng_irq_handler, ++ IRQF_ONESHOT, "turris-omnia-mcu-trng", ++ mcu); ++ if (err) ++ return dev_err_probe(dev, err, "Cannot request TRNG IRQ\n"); ++ ++ mcu->trng.name = "turris-omnia-mcu-trng"; ++ mcu->trng.read = omnia_trng_read; ++ ++ err = devm_hwrng_register(dev, &mcu->trng); ++ if (err) ++ return dev_err_probe(dev, err, "Cannot register TRNG\n"); ++ ++ return 0; ++} +--- a/drivers/platform/cznic/turris-omnia-mcu.h ++++ b/drivers/platform/cznic/turris-omnia-mcu.h +@@ -9,7 +9,9 @@ + #define __TURRIS_OMNIA_MCU_H + + #include ++#include + #include ++#include + #include + #include + #include +@@ -47,6 +49,10 @@ struct omnia_mcu { + + /* MCU watchdog */ + struct watchdog_device wdt; ++ ++ /* true random number generator */ ++ struct hwrng trng; ++ struct completion trng_entropy_ready; + }; + + int omnia_cmd_write_read(const struct i2c_client *client, +@@ -176,11 +182,13 @@ static inline int omnia_cmd_read_u8(cons + return omnia_cmd_read(client, cmd, reply, sizeof(*reply)); + } + ++extern const u8 omnia_int_to_gpio_idx[32]; + extern const struct attribute_group omnia_mcu_gpio_group; + extern const struct attribute_group omnia_mcu_poweroff_group; + + int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu); + int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu); ++int omnia_mcu_register_trng(struct omnia_mcu *mcu); + int omnia_mcu_register_watchdog(struct omnia_mcu *mcu); + + #endif /* __TURRIS_OMNIA_MCU_H */ diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-07-ARM-dts-turris-omnia-Add-MCU-system-controller-node.patch b/target/linux/mvebu/patches-6.6/820-v6.11-07-ARM-dts-turris-omnia-Add-MCU-system-controller-node.patch new file mode 100644 index 0000000000..ad65de2f52 --- /dev/null +++ b/target/linux/mvebu/patches-6.6/820-v6.11-07-ARM-dts-turris-omnia-Add-MCU-system-controller-node.patch @@ -0,0 +1,69 @@ +From 4f11095a4ae00b2fe4cebb21e36ee37cc62f5e1a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 1 Jul 2024 13:30:09 +0200 +Subject: [PATCH 07/11] ARM: dts: turris-omnia: Add MCU system-controller node +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Turris Omnia's MCU provides various features that can be configured over +I2C at address 0x2a. Add device-tree node. + +This does not carry a Fixes tag - we do not want this to get backported +to stable kernels for the following reason: U-Boot since v2022.10 +inserts a phy-reset-gpio property into the WAN ethernet node pointing to +the MCU node if it finds the MCU node with a cznic,turris-omnia-mcu +compatible. Thus if this change got backported to a stable kernel, the +WAN interface driver would defer probe indefinitely (since it would wait +for the turris-omnia-mcu driver which would not be present). + +Signed-off-by: Marek Behún +Reviewed-by: Andrew Lunn +Reviewed-by: Andy Shevchenko +Reviewed-by: Conor Dooley +Acked-by: Bartosz Golaszewski +Acked-by: Alexandre Belloni +Link: https://lore.kernel.org/r/20240701113010.16447-8-kabel@kernel.org +Signed-off-by: Arnd Bergmann +--- + .../dts/marvell/armada-385-turris-omnia.dts | 22 ++++++++++++++++++- + 1 file changed, 21 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts ++++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +@@ -218,7 +218,22 @@ + #size-cells = <0>; + reg = <0>; + +- /* STM32F0 command interface at address 0x2a */ ++ mcu: system-controller@2a { ++ compatible = "cznic,turris-omnia-mcu"; ++ reg = <0x2a>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mcu_pins>; ++ ++ interrupt-parent = <&gpio1>; ++ interrupts = <11 IRQ_TYPE_NONE>; ++ ++ gpio-controller; ++ #gpio-cells = <3>; ++ ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; + + led-controller@2b { + compatible = "cznic,turris-omnia-leds"; +@@ -503,6 +518,11 @@ + }; + + &pinctrl { ++ mcu_pins: mcu-pins { ++ marvell,pins = "mpp43"; ++ marvell,function = "gpio"; ++ }; ++ + pcawan_pins: pcawan-pins { + marvell,pins = "mpp46"; + marvell,function = "gpio"; diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-08-ARM-dts-turris-omnia-Add-GPIO-key-node-for-front-but.patch b/target/linux/mvebu/patches-6.6/820-v6.11-08-ARM-dts-turris-omnia-Add-GPIO-key-node-for-front-but.patch new file mode 100644 index 0000000000..4b36167d66 --- /dev/null +++ b/target/linux/mvebu/patches-6.6/820-v6.11-08-ARM-dts-turris-omnia-Add-GPIO-key-node-for-front-but.patch @@ -0,0 +1,46 @@ +From c3eeabe0b8d22d7c869278cc0cb35b83512fbed5 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 1 Jul 2024 13:30:10 +0200 +Subject: [PATCH 08/11] ARM: dts: turris-omnia: Add GPIO key node for front + button +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Now that we have the MCU device-tree node, which acts as a GPIO +controller, add GPIO key node for the front button. + +Signed-off-by: Marek Behún +Reviewed-by: Andrew Lunn +Reviewed-by: Andy Shevchenko +Reviewed-by: Conor Dooley +Acked-by: Bartosz Golaszewski +Acked-by: Alexandre Belloni +Link: https://lore.kernel.org/r/20240701113010.16447-9-kabel@kernel.org +Signed-off-by: Arnd Bergmann +--- + .../boot/dts/marvell/armada-385-turris-omnia.dts | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts ++++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +@@ -112,6 +112,19 @@ + status = "disabled"; + }; + ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ front-button { ++ label = "Front Button"; ++ linux,code = ; ++ linux,can-disable; ++ gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>; ++ /* debouncing is done by the microcontroller */ ++ debounce-interval = <0>; ++ }; ++ }; ++ + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-09-platform-cznic-turris-omnia-mcu-Depend-on-OF.patch b/target/linux/mvebu/patches-6.6/820-v6.11-09-platform-cznic-turris-omnia-mcu-Depend-on-OF.patch new file mode 100644 index 0000000000..80c9e1a3cc --- /dev/null +++ b/target/linux/mvebu/patches-6.6/820-v6.11-09-platform-cznic-turris-omnia-mcu-Depend-on-OF.patch @@ -0,0 +1,32 @@ +From 08838657bbc35494276c7ba4ef53f30a9816f8c9 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 8 Jul 2024 13:40:01 +0200 +Subject: [PATCH 09/11] platform: cznic: turris-omnia-mcu: Depend on OF +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add depend on OF, otherwise the compilation fails with + error: no member named 'of_gpio_n_cells' in 'struct gpio_chip' + error: no member named 'of_xlate' in 'struct gpio_chip' + +Fixes: dfa556e45ae9 ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs") +Reported-by: kernel test robot +Closes: https://lore.kernel.org/oe-kbuild-all/202407031646.trNSwajF-lkp@intel.com/ +Signed-off-by: Marek Behún +Link: https://lore.kernel.org/r/20240708114002.4285-2-kabel@kernel.org +Signed-off-by: Arnd Bergmann +--- + drivers/platform/cznic/Kconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/platform/cznic/Kconfig ++++ b/drivers/platform/cznic/Kconfig +@@ -16,6 +16,7 @@ config TURRIS_OMNIA_MCU + tristate "Turris Omnia MCU driver" + depends on MACH_ARMADA_38X || COMPILE_TEST + depends on I2C ++ depends on OF + select GPIOLIB + select GPIOLIB_IRQCHIP + select HW_RANDOM diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-10-platform-cznic-turris-omnia-mcu-Depend-on-WATCHDOG.patch b/target/linux/mvebu/patches-6.6/820-v6.11-10-platform-cznic-turris-omnia-mcu-Depend-on-WATCHDOG.patch new file mode 100644 index 0000000000..50e028752a --- /dev/null +++ b/target/linux/mvebu/patches-6.6/820-v6.11-10-platform-cznic-turris-omnia-mcu-Depend-on-WATCHDOG.patch @@ -0,0 +1,32 @@ +From 5e425e6eca155c162da58d4e58e896ed4109c7fd Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Mon, 8 Jul 2024 13:40:02 +0200 +Subject: [PATCH 10/11] platform: cznic: turris-omnia-mcu: Depend on WATCHDOG +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add depend on WATCHDOG, otherwise modpost fails with + ERROR: modpost: "watchdog_init_timeout" [drivers/platform/cznic/turris-omnia-mcu.ko] undefined! + ERROR: modpost: "devm_watchdog_register_device" [drivers/platform/cznic/turris-omnia-mcu.ko] undefined! + +Fixes: ab89fb5fb92c ("platform: cznic: turris-omnia-mcu: Add support for MCU watchdog") +Reported-by: kernel test robot +Closes: https://lore.kernel.org/oe-kbuild-all/202407040711.g19y3cWq-lkp@intel.com/ +Signed-off-by: Marek Behún +Link: https://lore.kernel.org/r/20240708114002.4285-3-kabel@kernel.org +Signed-off-by: Arnd Bergmann +--- + drivers/platform/cznic/Kconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/platform/cznic/Kconfig ++++ b/drivers/platform/cznic/Kconfig +@@ -17,6 +17,7 @@ config TURRIS_OMNIA_MCU + depends on MACH_ARMADA_38X || COMPILE_TEST + depends on I2C + depends on OF ++ depends on WATCHDOG + select GPIOLIB + select GPIOLIB_IRQCHIP + select HW_RANDOM diff --git a/target/linux/mvebu/patches-6.6/820-v6.11-11-platform-cznic-turris-omnia-mcu-fix-Kconfig-dependen.patch b/target/linux/mvebu/patches-6.6/820-v6.11-11-platform-cznic-turris-omnia-mcu-fix-Kconfig-dependen.patch new file mode 100644 index 0000000000..30a476586e --- /dev/null +++ b/target/linux/mvebu/patches-6.6/820-v6.11-11-platform-cznic-turris-omnia-mcu-fix-Kconfig-dependen.patch @@ -0,0 +1,45 @@ +From 24c68c2525de5fcd0f3b16b2ad1028fb13b53393 Mon Sep 17 00:00:00 2001 +From: Arnd Bergmann +Date: Mon, 15 Jul 2024 08:02:30 +0200 +Subject: [PATCH 11/11] platform: cznic: turris-omnia-mcu: fix Kconfig + dependencies + +The newly added driver causes a Kconfig warning: + +WARNING: unmet direct dependencies detected for RTC_CLASS + Depends on [n]: !S390 [=y] + Selected by [m]: + - TURRIS_OMNIA_MCU [=m] && CZNIC_PLATFORMS [=y] && (MACH_ARMADA_38X || COMPILE_TEST [=y]) && I2C [=m] && OF [=y] && WATCHDOG [=y] + +The problem here is that it selects entire subsystems, which normal +device drivers should not do. Changes all of these to 'depends on' +instead. + +Fixes: dfa556e45ae9e ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs") +Fixes: 90e700fd12b61 ("platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup") +Fixes: ab89fb5fb92c7 ("platform: cznic: turris-omnia-mcu: Add support for MCU watchdog") +Fixes: 41bb142a40289 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG") +Reported-by: Nathan Chancellor +Signed-off-by: Arnd Bergmann +--- + drivers/platform/cznic/Kconfig | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/platform/cznic/Kconfig ++++ b/drivers/platform/cznic/Kconfig +@@ -18,11 +18,11 @@ config TURRIS_OMNIA_MCU + depends on I2C + depends on OF + depends on WATCHDOG +- select GPIOLIB ++ depends on GPIOLIB ++ depends on HW_RANDOM ++ depends on RTC_CLASS ++ depends on WATCHDOG_CORE + select GPIOLIB_IRQCHIP +- select HW_RANDOM +- select RTC_CLASS +- select WATCHDOG_CORE + help + Say Y here to add support for the features implemented by the + microcontroller on the CZ.NIC's Turris Omnia SOHO router. diff --git a/target/linux/mvebu/patches-6.6/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch b/target/linux/mvebu/patches-6.6/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch index 2a8397d0b5..dad8c16be1 100644 --- a/target/linux/mvebu/patches-6.6/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch +++ b/target/linux/mvebu/patches-6.6/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch @@ -16,7 +16,7 @@ Cc: Robert Marko --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -10138,6 +10138,22 @@ IFCVF VIRTIO DATA PATH ACCELERATOR +@@ -10142,6 +10142,22 @@ IFCVF VIRTIO DATA PATH ACCELERATOR R: Zhu Lingshan F: drivers/vdpa/ifcvf/