From: Lech Perczak <lech.perczak@gmail.com>
Date: Mon, 21 Feb 2022 21:48:10 +0000 (+0100)
Subject: umbim: detect actual connection IP type
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=356a6f0eee93ffd03e8f398446ceded144c6237f;p=openwrt%2Fstaging%2Fblogic.git

umbim: detect actual connection IP type

Current implementation needlessly creates both IPv4 and IPv6
sub-interfaces for single-stack IP types. Limit this only to selected IP
type. While at that, ensure that IP type is also passed to umbim during
"connect" phase. In addition, detect the actual established connection
type returned by umbim and set up subinterfaces according to that,
not to requested configuration. While at that, allow empty IP type explicitly,
interpreted as "any" according to MBIM specification.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
---

diff --git a/package/network/utils/umbim/files/lib/netifd/proto/mbim.sh b/package/network/utils/umbim/files/lib/netifd/proto/mbim.sh
index c6fa6665ef39..c5f366327108 100755
--- a/package/network/utils/umbim/files/lib/netifd/proto/mbim.sh
+++ b/package/network/utils/umbim/files/lib/netifd/proto/mbim.sh
@@ -149,10 +149,13 @@ _proto_mbim_setup() {
 	tid=$((tid + 1))
 
 	pdptype=$(echo "$pdptype" | awk '{print tolower($0)}')
-	[ "$pdptype" = "ipv4" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype="ipv4v6"
 
+	local req_pdptype="" # Pass "default" PDP type to umbim if unconfigured
+	[ "$pdptype" = "ipv4" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && req_pdptype="$pdptype:"
+
+	local connect_state
 	echo "mbim[$$]" "Connect to network"
-	umbim $DBG -n -t $tid -d $device connect "$pdptype:$apn" "$auth" "$username" "$password" || {
+	connect_state=$(umbim $DBG -n -t $tid -d $device connect "$req_pdptype$apn" "$auth" "$username" "$password") || {
 		echo "mbim[$$]" "Failed to connect bearer"
 		tid=$((tid + 1))
 		umbim $DBG -t $tid -d "$device" disconnect
@@ -161,6 +164,9 @@ _proto_mbim_setup() {
 	}
 	tid=$((tid + 1))
 
+	echo "$connect_state"
+	local iptype="$(echo "$connect_state" | grep iptype: | awk '{print $4}')"
+
 	echo "mbim[$$]" "Connected"
 
 	if [ "$dhcp" = 0 ]; then
@@ -171,7 +177,7 @@ _proto_mbim_setup() {
 		proto_init_update "$ifname" 1
 		proto_send_update "$interface"
 
-		[ "$pdptype" = "ipv4" -o "$pdptype" = "ipv4v6" ] && {
+		[ "$iptype" != "ipv6" ] && {
 			json_init
 			json_add_string name "${interface}_4"
 			json_add_string ifname "@$interface"
@@ -188,7 +194,7 @@ _proto_mbim_setup() {
 			ubus call network add_dynamic "$(json_dump)"
 		}
 
-		[ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
+		[ "$iptype" != "ipv4" ] && {
 			json_init
 			json_add_string name "${interface}_6"
 			json_add_string ifname "@$interface"