From: Luka Perkov <luka@openwrt.org>
Date: Sun, 18 Jan 2015 16:45:01 +0000 (+0000)
Subject: kirkwood: enable switch on Linksys EA3500
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=34f6c6fc3809e3a5ecaf7698b048741d1792ba2b;p=openwrt%2Fstaging%2Fdangole.git

kirkwood: enable switch on Linksys EA3500

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 44036
---

diff --git a/target/linux/kirkwood/base-files/etc/uci-defaults/02_network b/target/linux/kirkwood/base-files/etc/uci-defaults/02_network
index 9fd6845924..994d7e8998 100644
--- a/target/linux/kirkwood/base-files/etc/uci-defaults/02_network
+++ b/target/linux/kirkwood/base-files/etc/uci-defaults/02_network
@@ -55,6 +55,9 @@ case "$board" in
 	;;
 "ea3500")
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	ucidef_add_switch "switch0" "1" "0"
+	add_port_based_vlan "switch0" "1" "0 1 2 3 5"
+	add_port_based_vlan "switch0" "2" "4 6"
 	;;
 "ea4500")
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
diff --git a/target/linux/kirkwood/patches-3.14/170-ea3500.patch b/target/linux/kirkwood/patches-3.14/170-ea3500.patch
index ac4f45ca3e..58e7a1fbd1 100644
--- a/target/linux/kirkwood/patches-3.14/170-ea3500.patch
+++ b/target/linux/kirkwood/patches-3.14/170-ea3500.patch
@@ -10,7 +10,7 @@
  	kirkwood-guruplug-server-plus.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-ea3500.dts
-@@ -0,0 +1,149 @@
+@@ -0,0 +1,160 @@
 +/*
 + * kirkwood-ea3500.dts - Device Tree file for Linksys EA3500
 + *
@@ -112,6 +112,17 @@
 +			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 +		};
 +	};
++
++	mvsw61xx {
++		compatible = "marvell,88e6171";
++		status = "okay";
++		reg = <0x10>;
++
++		mii-bus = <&mdio>;
++		cpu-port-0 = <5>;
++		cpu-port-1 = <6>;
++		is-indirect;
++	};
 +};
 +
 +&nand {
diff --git a/target/linux/kirkwood/patches-3.18/170-ea3500.patch b/target/linux/kirkwood/patches-3.18/170-ea3500.patch
index 95007fa30d..84645decf3 100644
--- a/target/linux/kirkwood/patches-3.18/170-ea3500.patch
+++ b/target/linux/kirkwood/patches-3.18/170-ea3500.patch
@@ -10,7 +10,7 @@
  	kirkwood-guruplug-server-plus.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-ea3500.dts
-@@ -0,0 +1,149 @@
+@@ -0,0 +1,160 @@
 +/*
 + * kirkwood-ea3500.dts - Device Tree file for Linksys EA3500
 + *
@@ -112,6 +112,17 @@
 +			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 +		};
 +	};
++
++	mvsw61xx {
++		compatible = "marvell,88e6171";
++		status = "okay";
++		reg = <0x10>;
++
++		mii-bus = <&mdio>;
++		cpu-port-0 = <5>;
++		cpu-port-1 = <6>;
++		is-indirect;
++	};
 +};
 +
 +&nand {