From: Hauke Mehrtens Date: Sat, 15 Jul 2017 20:50:41 +0000 (+0200) Subject: sunxi: Backport patches needed for A64 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=34a422794ddab738408edc7e3980ccbc14f28af4;p=openwrt%2Fstaging%2Fblocktrron.git sunxi: Backport patches needed for A64 This backports multiple patches from kernel 4.10 which are adding missing support for the A64 and the pine64 board. These are the device tree files, the pinctlk and the clock driver. Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/sunxi/config-4.9 b/target/linux/sunxi/config-4.9 index f338c6ec76..45677f9a83 100644 --- a/target/linux/sunxi/config-4.9 +++ b/target/linux/sunxi/config-4.9 @@ -486,6 +486,7 @@ CONFIG_STMMAC_PLATFORM=y CONFIG_STRICT_DEVMEM=y # CONFIG_SUN4I_EMAC is not set CONFIG_SUN4I_TIMER=y +# CONFIG_SUN50I_A64_CCU is not set CONFIG_SUN5I_HSTIMER=y CONFIG_SUN6I_A31_CCU=y CONFIG_SUN8I_A23_CCU=y diff --git a/target/linux/sunxi/patches-4.9/0001-arm64-sunxi-always-enable-reset-controller.patch b/target/linux/sunxi/patches-4.9/0001-arm64-sunxi-always-enable-reset-controller.patch new file mode 100644 index 0000000000..e23475218b --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0001-arm64-sunxi-always-enable-reset-controller.patch @@ -0,0 +1,39 @@ +From 900a9020af7a023f9b64c919fddf8a7486108962 Mon Sep 17 00:00:00 2001 +From: Arnd Bergmann +Date: Tue, 18 Apr 2017 15:55:51 +0200 +Subject: arm64: sunxi: always enable reset controller + +The sunxi clk driver causes a link error when the reset controller +subsystem is disabled: + +drivers/clk/built-in.o: In function `sun4i_ve_clk_setup': +:(.init.text+0xd040): undefined reference to `reset_controller_register' +drivers/clk/built-in.o: In function `sun4i_a10_display_init': +:(.init.text+0xe5e0): undefined reference to `reset_controller_register' +drivers/clk/built-in.o: In function `sunxi_usb_clk_setup': +:(.init.text+0x10074): undefined reference to `reset_controller_register' + +We already force it to be enabled on arm32 and some other arm64 platforms, +but not on arm64/sunxi. This adds the respective Kconfig statements to +also select it here. + +Signed-off-by: Arnd Bergmann +Acked-by: Maxime Ripard +--- + arch/arm64/Kconfig.platforms | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/Kconfig.platforms ++++ b/arch/arm64/Kconfig.platforms +@@ -2,9 +2,11 @@ menu "Platform selection" + + config ARCH_SUNXI + bool "Allwinner sunxi 64-bit SoC Family" ++ select ARCH_HAS_RESET_CONTROLLER + select GENERIC_IRQ_CHIP + select PINCTRL + select PINCTRL_SUN50I_A64 ++ select RESET_CONTROLLER + help + This enables support for Allwinner sunxi based SoCs like the A64. + diff --git a/target/linux/sunxi/patches-4.9/0002-clk-sunxi-ng-Rename-the-internal-structures.patch b/target/linux/sunxi/patches-4.9/0002-clk-sunxi-ng-Rename-the-internal-structures.patch new file mode 100644 index 0000000000..f3e485d88a --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0002-clk-sunxi-ng-Rename-the-internal-structures.patch @@ -0,0 +1,239 @@ +From a501a14e38cc4d8e9c91bb508cdca7032d53f717 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Fri, 30 Sep 2016 10:05:32 +0200 +Subject: clk: sunxi-ng: Rename the internal structures + +Rename the structures meant to be embedded in other structures to make it +consistent with the mux structure name + +Signed-off-by: Maxime Ripard +Acked-by: Chen-Yu Tsai +--- + drivers/clk/sunxi-ng/ccu_div.h | 6 +++--- + drivers/clk/sunxi-ng/ccu_frac.c | 12 ++++++------ + drivers/clk/sunxi-ng/ccu_frac.h | 14 +++++++------- + drivers/clk/sunxi-ng/ccu_mp.h | 4 ++-- + drivers/clk/sunxi-ng/ccu_mult.h | 4 ++-- + drivers/clk/sunxi-ng/ccu_nk.h | 4 ++-- + drivers/clk/sunxi-ng/ccu_nkm.h | 6 +++--- + drivers/clk/sunxi-ng/ccu_nkmp.h | 8 ++++---- + drivers/clk/sunxi-ng/ccu_nm.h | 6 +++--- + 9 files changed, 32 insertions(+), 32 deletions(-) + +--- a/drivers/clk/sunxi-ng/ccu_div.h ++++ b/drivers/clk/sunxi-ng/ccu_div.h +@@ -20,7 +20,7 @@ + #include "ccu_mux.h" + + /** +- * struct _ccu_div - Internal divider description ++ * struct ccu_div_internal - Internal divider description + * @shift: Bit offset of the divider in its register + * @width: Width of the divider field in its register + * @max: Maximum value allowed for that divider. This is the +@@ -36,7 +36,7 @@ + * It is basically a wrapper around the clk_divider functions + * arguments. + */ +-struct _ccu_div { ++struct ccu_div_internal { + u8 shift; + u8 width; + +@@ -78,7 +78,7 @@ struct _ccu_div { + struct ccu_div { + u32 enable; + +- struct _ccu_div div; ++ struct ccu_div_internal div; + struct ccu_mux_internal mux; + struct ccu_common common; + }; +--- a/drivers/clk/sunxi-ng/ccu_frac.c ++++ b/drivers/clk/sunxi-ng/ccu_frac.c +@@ -14,7 +14,7 @@ + #include "ccu_frac.h" + + bool ccu_frac_helper_is_enabled(struct ccu_common *common, +- struct _ccu_frac *cf) ++ struct ccu_frac_internal *cf) + { + if (!(common->features & CCU_FEATURE_FRACTIONAL)) + return false; +@@ -23,7 +23,7 @@ bool ccu_frac_helper_is_enabled(struct c + } + + void ccu_frac_helper_enable(struct ccu_common *common, +- struct _ccu_frac *cf) ++ struct ccu_frac_internal *cf) + { + unsigned long flags; + u32 reg; +@@ -38,7 +38,7 @@ void ccu_frac_helper_enable(struct ccu_c + } + + void ccu_frac_helper_disable(struct ccu_common *common, +- struct _ccu_frac *cf) ++ struct ccu_frac_internal *cf) + { + unsigned long flags; + u32 reg; +@@ -53,7 +53,7 @@ void ccu_frac_helper_disable(struct ccu_ + } + + bool ccu_frac_helper_has_rate(struct ccu_common *common, +- struct _ccu_frac *cf, ++ struct ccu_frac_internal *cf, + unsigned long rate) + { + if (!(common->features & CCU_FEATURE_FRACTIONAL)) +@@ -63,7 +63,7 @@ bool ccu_frac_helper_has_rate(struct ccu + } + + unsigned long ccu_frac_helper_read_rate(struct ccu_common *common, +- struct _ccu_frac *cf) ++ struct ccu_frac_internal *cf) + { + u32 reg; + +@@ -84,7 +84,7 @@ unsigned long ccu_frac_helper_read_rate( + } + + int ccu_frac_helper_set_rate(struct ccu_common *common, +- struct _ccu_frac *cf, ++ struct ccu_frac_internal *cf, + unsigned long rate) + { + unsigned long flags; +--- a/drivers/clk/sunxi-ng/ccu_frac.h ++++ b/drivers/clk/sunxi-ng/ccu_frac.h +@@ -18,7 +18,7 @@ + + #include "ccu_common.h" + +-struct _ccu_frac { ++struct ccu_frac_internal { + u32 enable; + u32 select; + +@@ -33,21 +33,21 @@ struct _ccu_frac { + } + + bool ccu_frac_helper_is_enabled(struct ccu_common *common, +- struct _ccu_frac *cf); ++ struct ccu_frac_internal *cf); + void ccu_frac_helper_enable(struct ccu_common *common, +- struct _ccu_frac *cf); ++ struct ccu_frac_internal *cf); + void ccu_frac_helper_disable(struct ccu_common *common, +- struct _ccu_frac *cf); ++ struct ccu_frac_internal *cf); + + bool ccu_frac_helper_has_rate(struct ccu_common *common, +- struct _ccu_frac *cf, ++ struct ccu_frac_internal *cf, + unsigned long rate); + + unsigned long ccu_frac_helper_read_rate(struct ccu_common *common, +- struct _ccu_frac *cf); ++ struct ccu_frac_internal *cf); + + int ccu_frac_helper_set_rate(struct ccu_common *common, +- struct _ccu_frac *cf, ++ struct ccu_frac_internal *cf, + unsigned long rate); + + #endif /* _CCU_FRAC_H_ */ +--- a/drivers/clk/sunxi-ng/ccu_mp.h ++++ b/drivers/clk/sunxi-ng/ccu_mp.h +@@ -29,8 +29,8 @@ + struct ccu_mp { + u32 enable; + +- struct _ccu_div m; +- struct _ccu_div p; ++ struct ccu_div_internal m; ++ struct ccu_div_internal p; + struct ccu_mux_internal mux; + struct ccu_common common; + }; +--- a/drivers/clk/sunxi-ng/ccu_mult.h ++++ b/drivers/clk/sunxi-ng/ccu_mult.h +@@ -4,7 +4,7 @@ + #include "ccu_common.h" + #include "ccu_mux.h" + +-struct _ccu_mult { ++struct ccu_mult_internal { + u8 shift; + u8 width; + }; +@@ -18,7 +18,7 @@ struct _ccu_mult { + struct ccu_mult { + u32 enable; + +- struct _ccu_mult mult; ++ struct ccu_mult_internal mult; + struct ccu_mux_internal mux; + struct ccu_common common; + }; +--- a/drivers/clk/sunxi-ng/ccu_nk.h ++++ b/drivers/clk/sunxi-ng/ccu_nk.h +@@ -30,8 +30,8 @@ struct ccu_nk { + u32 enable; + u32 lock; + +- struct _ccu_mult n; +- struct _ccu_mult k; ++ struct ccu_mult_internal n; ++ struct ccu_mult_internal k; + + unsigned int fixed_post_div; + +--- a/drivers/clk/sunxi-ng/ccu_nkm.h ++++ b/drivers/clk/sunxi-ng/ccu_nkm.h +@@ -29,9 +29,9 @@ struct ccu_nkm { + u32 enable; + u32 lock; + +- struct _ccu_mult n; +- struct _ccu_mult k; +- struct _ccu_div m; ++ struct ccu_mult_internal n; ++ struct ccu_mult_internal k; ++ struct ccu_div_internal m; + struct ccu_mux_internal mux; + + struct ccu_common common; +--- a/drivers/clk/sunxi-ng/ccu_nkmp.h ++++ b/drivers/clk/sunxi-ng/ccu_nkmp.h +@@ -29,10 +29,10 @@ struct ccu_nkmp { + u32 enable; + u32 lock; + +- struct _ccu_mult n; +- struct _ccu_mult k; +- struct _ccu_div m; +- struct _ccu_div p; ++ struct ccu_mult_internal n; ++ struct ccu_mult_internal k; ++ struct ccu_div_internal m; ++ struct ccu_div_internal p; + + struct ccu_common common; + }; +--- a/drivers/clk/sunxi-ng/ccu_nm.h ++++ b/drivers/clk/sunxi-ng/ccu_nm.h +@@ -30,9 +30,9 @@ struct ccu_nm { + u32 enable; + u32 lock; + +- struct _ccu_mult n; +- struct _ccu_div m; +- struct _ccu_frac frac; ++ struct ccu_mult_internal n; ++ struct ccu_div_internal m; ++ struct ccu_frac_internal frac; + + struct ccu_common common; + }; diff --git a/target/linux/sunxi/patches-4.9/0003-clk-sunxi-ng-Remove-the-use-of-rational-computations.patch b/target/linux/sunxi/patches-4.9/0003-clk-sunxi-ng-Remove-the-use-of-rational-computations.patch new file mode 100644 index 0000000000..6b8f46eae0 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0003-clk-sunxi-ng-Remove-the-use-of-rational-computations.patch @@ -0,0 +1,239 @@ +From ee28648cb2b4d4ab5c2eb8199ea86675fe19016b Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Thu, 29 Sep 2016 22:53:12 +0200 +Subject: clk: sunxi-ng: Remove the use of rational computations + +While the rational library works great, it doesn't really allow us to add +more constraints, like the minimum. + +Remove that in order to be able to deal with the constraints we'll need. + +Signed-off-by: Maxime Ripard +Acked-by: Chen-Yu Tsai +--- + drivers/clk/sunxi-ng/Kconfig | 3 --- + drivers/clk/sunxi-ng/ccu_nkm.c | 31 ++++++++++++----------- + drivers/clk/sunxi-ng/ccu_nkmp.c | 37 ++++++++++++++-------------- + drivers/clk/sunxi-ng/ccu_nm.c | 54 +++++++++++++++++++++++++++++++---------- + 4 files changed, 74 insertions(+), 51 deletions(-) + +--- a/drivers/clk/sunxi-ng/Kconfig ++++ b/drivers/clk/sunxi-ng/Kconfig +@@ -35,17 +35,14 @@ config SUNXI_CCU_NK + + config SUNXI_CCU_NKM + bool +- select RATIONAL + select SUNXI_CCU_GATE + + config SUNXI_CCU_NKMP + bool +- select RATIONAL + select SUNXI_CCU_GATE + + config SUNXI_CCU_NM + bool +- select RATIONAL + select SUNXI_CCU_FRAC + select SUNXI_CCU_GATE + +--- a/drivers/clk/sunxi-ng/ccu_nkm.c ++++ b/drivers/clk/sunxi-ng/ccu_nkm.c +@@ -9,7 +9,6 @@ + */ + + #include +-#include + + #include "ccu_gate.h" + #include "ccu_nkm.h" +@@ -28,21 +27,21 @@ static void ccu_nkm_find_best(unsigned l + unsigned long _n, _k, _m; + + for (_k = 1; _k <= nkm->max_k; _k++) { +- unsigned long tmp_rate; +- +- rational_best_approximation(rate / _k, parent, +- nkm->max_n, nkm->max_m, &_n, &_m); +- +- tmp_rate = parent * _n * _k / _m; +- +- if (tmp_rate > rate) +- continue; +- +- if ((rate - tmp_rate) < (rate - best_rate)) { +- best_rate = tmp_rate; +- best_n = _n; +- best_k = _k; +- best_m = _m; ++ for (_n = 1; _n <= nkm->max_n; _n++) { ++ for (_m = 1; _n <= nkm->max_m; _m++) { ++ unsigned long tmp_rate; ++ ++ tmp_rate = parent * _n * _k / _m; ++ ++ if (tmp_rate > rate) ++ continue; ++ if ((rate - tmp_rate) < (rate - best_rate)) { ++ best_rate = tmp_rate; ++ best_n = _n; ++ best_k = _k; ++ best_m = _m; ++ } ++ } + } + } + +--- a/drivers/clk/sunxi-ng/ccu_nkmp.c ++++ b/drivers/clk/sunxi-ng/ccu_nkmp.c +@@ -9,7 +9,6 @@ + */ + + #include +-#include + + #include "ccu_gate.h" + #include "ccu_nkmp.h" +@@ -29,24 +28,24 @@ static void ccu_nkmp_find_best(unsigned + unsigned long _n, _k, _m, _p; + + for (_k = 1; _k <= nkmp->max_k; _k++) { +- for (_p = 1; _p <= nkmp->max_p; _p <<= 1) { +- unsigned long tmp_rate; +- +- rational_best_approximation(rate / _k, parent / _p, +- nkmp->max_n, nkmp->max_m, +- &_n, &_m); +- +- tmp_rate = parent * _n * _k / (_m * _p); +- +- if (tmp_rate > rate) +- continue; +- +- if ((rate - tmp_rate) < (rate - best_rate)) { +- best_rate = tmp_rate; +- best_n = _n; +- best_k = _k; +- best_m = _m; +- best_p = _p; ++ for (_n = 1; _n <= nkmp->max_n; _n++) { ++ for (_m = 1; _n <= nkmp->max_m; _m++) { ++ for (_p = 1; _p <= nkmp->max_p; _p <<= 1) { ++ unsigned long tmp_rate; ++ ++ tmp_rate = parent * _n * _k / (_m * _p); ++ ++ if (tmp_rate > rate) ++ continue; ++ ++ if ((rate - tmp_rate) < (rate - best_rate)) { ++ best_rate = tmp_rate; ++ best_n = _n; ++ best_k = _k; ++ best_m = _m; ++ best_p = _p; ++ } ++ } + } + } + } +--- a/drivers/clk/sunxi-ng/ccu_nm.c ++++ b/drivers/clk/sunxi-ng/ccu_nm.c +@@ -9,12 +9,42 @@ + */ + + #include +-#include + + #include "ccu_frac.h" + #include "ccu_gate.h" + #include "ccu_nm.h" + ++struct _ccu_nm { ++ unsigned long n, max_n; ++ unsigned long m, max_m; ++}; ++ ++static void ccu_nm_find_best(unsigned long parent, unsigned long rate, ++ struct _ccu_nm *nm) ++{ ++ unsigned long best_rate = 0; ++ unsigned long best_n = 0, best_m = 0; ++ unsigned long _n, _m; ++ ++ for (_n = 1; _n <= nm->max_n; _n++) { ++ for (_m = 1; _n <= nm->max_m; _m++) { ++ unsigned long tmp_rate = parent * _n / _m; ++ ++ if (tmp_rate > rate) ++ continue; ++ ++ if ((rate - tmp_rate) < (rate - best_rate)) { ++ best_rate = tmp_rate; ++ best_n = _n; ++ best_m = _m; ++ } ++ } ++ } ++ ++ nm->n = best_n; ++ nm->m = best_m; ++} ++ + static void ccu_nm_disable(struct clk_hw *hw) + { + struct ccu_nm *nm = hw_to_ccu_nm(hw); +@@ -61,24 +91,22 @@ static long ccu_nm_round_rate(struct clk + unsigned long *parent_rate) + { + struct ccu_nm *nm = hw_to_ccu_nm(hw); +- unsigned long max_n, max_m; +- unsigned long n, m; ++ struct _ccu_nm _nm; + +- max_n = 1 << nm->n.width; +- max_m = nm->m.max ?: 1 << nm->m.width; ++ _nm.max_n = 1 << nm->n.width; ++ _nm.max_m = nm->m.max ?: 1 << nm->m.width; + +- rational_best_approximation(rate, *parent_rate, max_n, max_m, &n, &m); ++ ccu_nm_find_best(*parent_rate, rate, &_nm); + +- return *parent_rate * n / m; ++ return *parent_rate * _nm.n / _nm.m; + } + + static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) + { + struct ccu_nm *nm = hw_to_ccu_nm(hw); ++ struct _ccu_nm _nm; + unsigned long flags; +- unsigned long max_n, max_m; +- unsigned long n, m; + u32 reg; + + if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) +@@ -86,10 +114,10 @@ static int ccu_nm_set_rate(struct clk_hw + else + ccu_frac_helper_disable(&nm->common, &nm->frac); + +- max_n = 1 << nm->n.width; +- max_m = nm->m.max ?: 1 << nm->m.width; ++ _nm.max_n = 1 << nm->n.width; ++ _nm.max_m = nm->m.max ?: 1 << nm->m.width; + +- rational_best_approximation(rate, parent_rate, max_n, max_m, &n, &m); ++ ccu_nm_find_best(parent_rate, rate, &_nm); + + spin_lock_irqsave(nm->common.lock, flags); + +@@ -97,7 +125,7 @@ static int ccu_nm_set_rate(struct clk_hw + reg &= ~GENMASK(nm->n.width + nm->n.shift - 1, nm->n.shift); + reg &= ~GENMASK(nm->m.width + nm->m.shift - 1, nm->m.shift); + +- writel(reg | ((m - 1) << nm->m.shift) | ((n - 1) << nm->n.shift), ++ writel(reg | ((_nm.m - 1) << nm->m.shift) | ((_nm.n - 1) << nm->n.shift), + nm->common.base + nm->common.reg); + + spin_unlock_irqrestore(nm->common.lock, flags); diff --git a/target/linux/sunxi/patches-4.9/0004-clk-sunxi-ng-Finish-to-convert-to-structures-for-arg.patch b/target/linux/sunxi/patches-4.9/0004-clk-sunxi-ng-Finish-to-convert-to-structures-for-arg.patch new file mode 100644 index 0000000000..4b91892b81 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0004-clk-sunxi-ng-Finish-to-convert-to-structures-for-arg.patch @@ -0,0 +1,182 @@ +From b8302c7267dedaeeb1bf38143f099defbf16dce8 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Thu, 29 Sep 2016 23:50:21 +0200 +Subject: clk: sunxi-ng: Finish to convert to structures for arguments + +Some clocks still use an explicit list of arguments, which make it a bit +more tedious to add new parameters. + +Convert those over to a structure pointer argument to add as many +arguments as possible without having to many noise in our patches, or a +very long list of arguments. + +Signed-off-by: Maxime Ripard +Acked-by: Chen-Yu Tsai +--- + drivers/clk/sunxi-ng/ccu_mult.c | 28 ++++++++++++++++++++-------- + drivers/clk/sunxi-ng/ccu_nk.c | 39 ++++++++++++++++++++++----------------- + 2 files changed, 42 insertions(+), 25 deletions(-) + +--- a/drivers/clk/sunxi-ng/ccu_mult.c ++++ b/drivers/clk/sunxi-ng/ccu_mult.c +@@ -13,10 +13,20 @@ + #include "ccu_gate.h" + #include "ccu_mult.h" + ++struct _ccu_mult { ++ unsigned long mult, max; ++}; ++ + static void ccu_mult_find_best(unsigned long parent, unsigned long rate, +- unsigned int max_n, unsigned int *n) ++ struct _ccu_mult *mult) + { +- *n = rate / parent; ++ int _mult; ++ ++ _mult = rate / parent; ++ if (_mult > mult->max) ++ _mult = mult->max; ++ ++ mult->mult = _mult; + } + + static unsigned long ccu_mult_round_rate(struct ccu_mux_internal *mux, +@@ -25,11 +35,12 @@ static unsigned long ccu_mult_round_rate + void *data) + { + struct ccu_mult *cm = data; +- unsigned int n; ++ struct _ccu_mult _cm; + +- ccu_mult_find_best(parent_rate, rate, 1 << cm->mult.width, &n); ++ _cm.max = 1 << cm->mult.width; ++ ccu_mult_find_best(parent_rate, rate, &_cm); + +- return parent_rate * n; ++ return parent_rate * _cm.mult; + } + + static void ccu_mult_disable(struct clk_hw *hw) +@@ -83,21 +94,22 @@ static int ccu_mult_set_rate(struct clk_ + unsigned long parent_rate) + { + struct ccu_mult *cm = hw_to_ccu_mult(hw); ++ struct _ccu_mult _cm; + unsigned long flags; +- unsigned int n; + u32 reg; + + ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1, + &parent_rate); + +- ccu_mult_find_best(parent_rate, rate, 1 << cm->mult.width, &n); ++ _cm.max = 1 << cm->mult.width; ++ ccu_mult_find_best(parent_rate, rate, &_cm); + + spin_lock_irqsave(cm->common.lock, flags); + + reg = readl(cm->common.base + cm->common.reg); + reg &= ~GENMASK(cm->mult.width + cm->mult.shift - 1, cm->mult.shift); + +- writel(reg | ((n - 1) << cm->mult.shift), ++ writel(reg | ((_cm.mult - 1) << cm->mult.shift), + cm->common.base + cm->common.reg); + + spin_unlock_irqrestore(cm->common.lock, flags); +--- a/drivers/clk/sunxi-ng/ccu_nk.c ++++ b/drivers/clk/sunxi-ng/ccu_nk.c +@@ -9,21 +9,24 @@ + */ + + #include +-#include + + #include "ccu_gate.h" + #include "ccu_nk.h" + ++struct _ccu_nk { ++ unsigned long n, max_n; ++ unsigned long k, max_k; ++}; ++ + static void ccu_nk_find_best(unsigned long parent, unsigned long rate, +- unsigned int max_n, unsigned int max_k, +- unsigned int *n, unsigned int *k) ++ struct _ccu_nk *nk) + { + unsigned long best_rate = 0; + unsigned int best_k = 0, best_n = 0; + unsigned int _k, _n; + +- for (_k = 1; _k <= max_k; _k++) { +- for (_n = 1; _n <= max_n; _n++) { ++ for (_k = 1; _k <= nk->max_k; _k++) { ++ for (_n = 1; _n <= nk->max_n; _n++) { + unsigned long tmp_rate = parent * _n * _k; + + if (tmp_rate > rate) +@@ -37,8 +40,8 @@ static void ccu_nk_find_best(unsigned lo + } + } + +- *k = best_k; +- *n = best_n; ++ nk->k = best_k; ++ nk->n = best_n; + } + + static void ccu_nk_disable(struct clk_hw *hw) +@@ -89,16 +92,17 @@ static long ccu_nk_round_rate(struct clk + unsigned long *parent_rate) + { + struct ccu_nk *nk = hw_to_ccu_nk(hw); +- unsigned int n, k; ++ struct _ccu_nk _nk; + + if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV) + rate *= nk->fixed_post_div; + +- ccu_nk_find_best(*parent_rate, rate, +- 1 << nk->n.width, 1 << nk->k.width, +- &n, &k); ++ _nk.max_n = 1 << nk->n.width; ++ _nk.max_k = 1 << nk->k.width; ++ ++ ccu_nk_find_best(*parent_rate, rate, &_nk); ++ rate = *parent_rate * _nk.n * _nk.k; + +- rate = *parent_rate * n * k; + if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV) + rate = rate / nk->fixed_post_div; + +@@ -110,15 +114,16 @@ static int ccu_nk_set_rate(struct clk_hw + { + struct ccu_nk *nk = hw_to_ccu_nk(hw); + unsigned long flags; +- unsigned int n, k; ++ struct _ccu_nk _nk; + u32 reg; + + if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV) + rate = rate * nk->fixed_post_div; + +- ccu_nk_find_best(parent_rate, rate, +- 1 << nk->n.width, 1 << nk->k.width, +- &n, &k); ++ _nk.max_n = 1 << nk->n.width; ++ _nk.max_k = 1 << nk->k.width; ++ ++ ccu_nk_find_best(parent_rate, rate, &_nk); + + spin_lock_irqsave(nk->common.lock, flags); + +@@ -126,7 +131,7 @@ static int ccu_nk_set_rate(struct clk_hw + reg &= ~GENMASK(nk->n.width + nk->n.shift - 1, nk->n.shift); + reg &= ~GENMASK(nk->k.width + nk->k.shift - 1, nk->k.shift); + +- writel(reg | ((k - 1) << nk->k.shift) | ((n - 1) << nk->n.shift), ++ writel(reg | ((_nk.k - 1) << nk->k.shift) | ((_nk.n - 1) << nk->n.shift), + nk->common.base + nk->common.reg); + + spin_unlock_irqrestore(nk->common.lock, flags); diff --git a/target/linux/sunxi/patches-4.9/0005-clk-sunxi-ng-Add-minimums-for-all-the-relevant-struc.patch b/target/linux/sunxi/patches-4.9/0005-clk-sunxi-ng-Add-minimums-for-all-the-relevant-struc.patch new file mode 100644 index 0000000000..0165ade138 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0005-clk-sunxi-ng-Add-minimums-for-all-the-relevant-struc.patch @@ -0,0 +1,256 @@ +From 6e0d50daa97f4bf9706e343b4f71171e88921209 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Thu, 29 Sep 2016 22:57:26 +0200 +Subject: clk: sunxi-ng: Add minimums for all the relevant structures and + clocks + +Modify the current clocks we have to be able to specify the minimum for +each clocks we support, just like we support the max. + +Signed-off-by: Maxime Ripard +Acked-by: Chen-Yu Tsai +--- + drivers/clk/sunxi-ng/ccu_mult.c | 7 ++++++- + drivers/clk/sunxi-ng/ccu_nk.c | 12 ++++++++---- + drivers/clk/sunxi-ng/ccu_nkm.c | 18 ++++++++++++------ + drivers/clk/sunxi-ng/ccu_nkmp.c | 24 ++++++++++++++++-------- + drivers/clk/sunxi-ng/ccu_nm.c | 12 ++++++++---- + 5 files changed, 50 insertions(+), 23 deletions(-) + +--- a/drivers/clk/sunxi-ng/ccu_mult.c ++++ b/drivers/clk/sunxi-ng/ccu_mult.c +@@ -14,7 +14,7 @@ + #include "ccu_mult.h" + + struct _ccu_mult { +- unsigned long mult, max; ++ unsigned long mult, min, max; + }; + + static void ccu_mult_find_best(unsigned long parent, unsigned long rate, +@@ -23,6 +23,9 @@ static void ccu_mult_find_best(unsigned + int _mult; + + _mult = rate / parent; ++ if (_mult < mult->min) ++ _mult = mult->min; ++ + if (_mult > mult->max) + _mult = mult->max; + +@@ -37,6 +40,7 @@ static unsigned long ccu_mult_round_rate + struct ccu_mult *cm = data; + struct _ccu_mult _cm; + ++ _cm.min = 1; + _cm.max = 1 << cm->mult.width; + ccu_mult_find_best(parent_rate, rate, &_cm); + +@@ -101,6 +105,7 @@ static int ccu_mult_set_rate(struct clk_ + ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1, + &parent_rate); + ++ _cm.min = 1; + _cm.max = 1 << cm->mult.width; + ccu_mult_find_best(parent_rate, rate, &_cm); + +--- a/drivers/clk/sunxi-ng/ccu_nk.c ++++ b/drivers/clk/sunxi-ng/ccu_nk.c +@@ -14,8 +14,8 @@ + #include "ccu_nk.h" + + struct _ccu_nk { +- unsigned long n, max_n; +- unsigned long k, max_k; ++ unsigned long n, min_n, max_n; ++ unsigned long k, min_k, max_k; + }; + + static void ccu_nk_find_best(unsigned long parent, unsigned long rate, +@@ -25,8 +25,8 @@ static void ccu_nk_find_best(unsigned lo + unsigned int best_k = 0, best_n = 0; + unsigned int _k, _n; + +- for (_k = 1; _k <= nk->max_k; _k++) { +- for (_n = 1; _n <= nk->max_n; _n++) { ++ for (_k = nk->min_k; _k <= nk->max_k; _k++) { ++ for (_n = nk->min_n; _n <= nk->max_n; _n++) { + unsigned long tmp_rate = parent * _n * _k; + + if (tmp_rate > rate) +@@ -97,7 +97,9 @@ static long ccu_nk_round_rate(struct clk + if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV) + rate *= nk->fixed_post_div; + ++ _nk.min_n = 1; + _nk.max_n = 1 << nk->n.width; ++ _nk.min_k = 1; + _nk.max_k = 1 << nk->k.width; + + ccu_nk_find_best(*parent_rate, rate, &_nk); +@@ -120,7 +122,9 @@ static int ccu_nk_set_rate(struct clk_hw + if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV) + rate = rate * nk->fixed_post_div; + ++ _nk.min_n = 1; + _nk.max_n = 1 << nk->n.width; ++ _nk.min_k = 1; + _nk.max_k = 1 << nk->k.width; + + ccu_nk_find_best(parent_rate, rate, &_nk); +--- a/drivers/clk/sunxi-ng/ccu_nkm.c ++++ b/drivers/clk/sunxi-ng/ccu_nkm.c +@@ -14,9 +14,9 @@ + #include "ccu_nkm.h" + + struct _ccu_nkm { +- unsigned long n, max_n; +- unsigned long k, max_k; +- unsigned long m, max_m; ++ unsigned long n, min_n, max_n; ++ unsigned long k, min_k, max_k; ++ unsigned long m, min_m, max_m; + }; + + static void ccu_nkm_find_best(unsigned long parent, unsigned long rate, +@@ -26,9 +26,9 @@ static void ccu_nkm_find_best(unsigned l + unsigned long best_n = 0, best_k = 0, best_m = 0; + unsigned long _n, _k, _m; + +- for (_k = 1; _k <= nkm->max_k; _k++) { +- for (_n = 1; _n <= nkm->max_n; _n++) { +- for (_m = 1; _n <= nkm->max_m; _m++) { ++ for (_k = nkm->min_k; _k <= nkm->max_k; _k++) { ++ for (_n = nkm->min_n; _n <= nkm->max_n; _n++) { ++ for (_m = nkm->min_m; _m <= nkm->max_m; _m++) { + unsigned long tmp_rate; + + tmp_rate = parent * _n * _k / _m; +@@ -100,8 +100,11 @@ static unsigned long ccu_nkm_round_rate( + struct ccu_nkm *nkm = data; + struct _ccu_nkm _nkm; + ++ _nkm.min_n = 1; + _nkm.max_n = 1 << nkm->n.width; ++ _nkm.min_k = 1; + _nkm.max_k = 1 << nkm->k.width; ++ _nkm.min_m = 1; + _nkm.max_m = nkm->m.max ?: 1 << nkm->m.width; + + ccu_nkm_find_best(parent_rate, rate, &_nkm); +@@ -126,8 +129,11 @@ static int ccu_nkm_set_rate(struct clk_h + unsigned long flags; + u32 reg; + ++ _nkm.min_n = 1; + _nkm.max_n = 1 << nkm->n.width; ++ _nkm.min_k = 1; + _nkm.max_k = 1 << nkm->k.width; ++ _nkm.min_m = 1; + _nkm.max_m = nkm->m.max ?: 1 << nkm->m.width; + + ccu_nkm_find_best(parent_rate, rate, &_nkm); +--- a/drivers/clk/sunxi-ng/ccu_nkmp.c ++++ b/drivers/clk/sunxi-ng/ccu_nkmp.c +@@ -14,10 +14,10 @@ + #include "ccu_nkmp.h" + + struct _ccu_nkmp { +- unsigned long n, max_n; +- unsigned long k, max_k; +- unsigned long m, max_m; +- unsigned long p, max_p; ++ unsigned long n, min_n, max_n; ++ unsigned long k, min_k, max_k; ++ unsigned long m, min_m, max_m; ++ unsigned long p, min_p, max_p; + }; + + static void ccu_nkmp_find_best(unsigned long parent, unsigned long rate, +@@ -27,10 +27,10 @@ static void ccu_nkmp_find_best(unsigned + unsigned long best_n = 0, best_k = 0, best_m = 0, best_p = 0; + unsigned long _n, _k, _m, _p; + +- for (_k = 1; _k <= nkmp->max_k; _k++) { +- for (_n = 1; _n <= nkmp->max_n; _n++) { +- for (_m = 1; _n <= nkmp->max_m; _m++) { +- for (_p = 1; _p <= nkmp->max_p; _p <<= 1) { ++ for (_k = nkmp->min_k; _k <= nkmp->max_k; _k++) { ++ for (_n = nkmp->min_n; _n <= nkmp->max_n; _n++) { ++ for (_m = nkmp->min_m; _m <= nkmp->max_m; _m++) { ++ for (_p = nkmp->min_p; _p <= nkmp->max_p; _p <<= 1) { + unsigned long tmp_rate; + + tmp_rate = parent * _n * _k / (_m * _p); +@@ -107,9 +107,13 @@ static long ccu_nkmp_round_rate(struct c + struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw); + struct _ccu_nkmp _nkmp; + ++ _nkmp.min_n = 1; + _nkmp.max_n = 1 << nkmp->n.width; ++ _nkmp.min_k = 1; + _nkmp.max_k = 1 << nkmp->k.width; ++ _nkmp.min_m = 1; + _nkmp.max_m = nkmp->m.max ?: 1 << nkmp->m.width; ++ _nkmp.min_p = 1; + _nkmp.max_p = nkmp->p.max ?: 1 << ((1 << nkmp->p.width) - 1); + + ccu_nkmp_find_best(*parent_rate, rate, &_nkmp); +@@ -125,9 +129,13 @@ static int ccu_nkmp_set_rate(struct clk_ + unsigned long flags; + u32 reg; + ++ _nkmp.min_n = 1; + _nkmp.max_n = 1 << nkmp->n.width; ++ _nkmp.min_k = 1; + _nkmp.max_k = 1 << nkmp->k.width; ++ _nkmp.min_m = 1; + _nkmp.max_m = nkmp->m.max ?: 1 << nkmp->m.width; ++ _nkmp.min_p = 1; + _nkmp.max_p = nkmp->p.max ?: 1 << ((1 << nkmp->p.width) - 1); + + ccu_nkmp_find_best(parent_rate, rate, &_nkmp); +--- a/drivers/clk/sunxi-ng/ccu_nm.c ++++ b/drivers/clk/sunxi-ng/ccu_nm.c +@@ -15,8 +15,8 @@ + #include "ccu_nm.h" + + struct _ccu_nm { +- unsigned long n, max_n; +- unsigned long m, max_m; ++ unsigned long n, min_n, max_n; ++ unsigned long m, min_m, max_m; + }; + + static void ccu_nm_find_best(unsigned long parent, unsigned long rate, +@@ -26,8 +26,8 @@ static void ccu_nm_find_best(unsigned lo + unsigned long best_n = 0, best_m = 0; + unsigned long _n, _m; + +- for (_n = 1; _n <= nm->max_n; _n++) { +- for (_m = 1; _n <= nm->max_m; _m++) { ++ for (_n = nm->min_n; _n <= nm->max_n; _n++) { ++ for (_m = nm->min_m; _m <= nm->max_m; _m++) { + unsigned long tmp_rate = parent * _n / _m; + + if (tmp_rate > rate) +@@ -93,7 +93,9 @@ static long ccu_nm_round_rate(struct clk + struct ccu_nm *nm = hw_to_ccu_nm(hw); + struct _ccu_nm _nm; + ++ _nm.min_n = 1; + _nm.max_n = 1 << nm->n.width; ++ _nm.min_m = 1; + _nm.max_m = nm->m.max ?: 1 << nm->m.width; + + ccu_nm_find_best(*parent_rate, rate, &_nm); +@@ -114,7 +116,9 @@ static int ccu_nm_set_rate(struct clk_hw + else + ccu_frac_helper_disable(&nm->common, &nm->frac); + ++ _nm.min_n = 1; + _nm.max_n = 1 << nm->n.width; ++ _nm.min_m = 1; + _nm.max_m = nm->m.max ?: 1 << nm->m.width; + + ccu_nm_find_best(parent_rate, rate, &_nm); diff --git a/target/linux/sunxi/patches-4.9/0006-clk-sunxi-ng-Implement-minimum-for-multipliers.patch b/target/linux/sunxi/patches-4.9/0006-clk-sunxi-ng-Implement-minimum-for-multipliers.patch new file mode 100644 index 0000000000..668d596493 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0006-clk-sunxi-ng-Implement-minimum-for-multipliers.patch @@ -0,0 +1,132 @@ +From 2beaa601c849e72683a2dd0fe6fd77763f19f051 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Fri, 30 Sep 2016 22:16:51 +0200 +Subject: clk: sunxi-ng: Implement minimum for multipliers + +Allow the CCU drivers to specify a multiplier for their clocks. + +Signed-off-by: Maxime Ripard +Acked-by: Chen-Yu Tsai +--- + drivers/clk/sunxi-ng/ccu_mult.c | 2 +- + drivers/clk/sunxi-ng/ccu_mult.h | 13 +++++++++---- + drivers/clk/sunxi-ng/ccu_nk.c | 8 ++++---- + drivers/clk/sunxi-ng/ccu_nkm.c | 8 ++++---- + drivers/clk/sunxi-ng/ccu_nkmp.c | 4 ++-- + drivers/clk/sunxi-ng/ccu_nm.c | 2 +- + 6 files changed, 21 insertions(+), 16 deletions(-) + +--- a/drivers/clk/sunxi-ng/ccu_mult.c ++++ b/drivers/clk/sunxi-ng/ccu_mult.c +@@ -105,7 +105,7 @@ static int ccu_mult_set_rate(struct clk_ + ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1, + &parent_rate); + +- _cm.min = 1; ++ _cm.min = cm->mult.min; + _cm.max = 1 << cm->mult.width; + ccu_mult_find_best(parent_rate, rate, &_cm); + +--- a/drivers/clk/sunxi-ng/ccu_mult.h ++++ b/drivers/clk/sunxi-ng/ccu_mult.h +@@ -7,14 +7,19 @@ + struct ccu_mult_internal { + u8 shift; + u8 width; ++ u8 min; + }; + +-#define _SUNXI_CCU_MULT(_shift, _width) \ +- { \ +- .shift = _shift, \ +- .width = _width, \ ++#define _SUNXI_CCU_MULT_MIN(_shift, _width, _min) \ ++ { \ ++ .shift = _shift, \ ++ .width = _width, \ ++ .min = _min, \ + } + ++#define _SUNXI_CCU_MULT(_shift, _width) \ ++ _SUNXI_CCU_MULT_MIN(_shift, _width, 1) ++ + struct ccu_mult { + u32 enable; + +--- a/drivers/clk/sunxi-ng/ccu_nk.c ++++ b/drivers/clk/sunxi-ng/ccu_nk.c +@@ -97,9 +97,9 @@ static long ccu_nk_round_rate(struct clk + if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV) + rate *= nk->fixed_post_div; + +- _nk.min_n = 1; ++ _nk.min_n = nk->n.min; + _nk.max_n = 1 << nk->n.width; +- _nk.min_k = 1; ++ _nk.min_k = nk->k.min; + _nk.max_k = 1 << nk->k.width; + + ccu_nk_find_best(*parent_rate, rate, &_nk); +@@ -122,9 +122,9 @@ static int ccu_nk_set_rate(struct clk_hw + if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV) + rate = rate * nk->fixed_post_div; + +- _nk.min_n = 1; ++ _nk.min_n = nk->n.min; + _nk.max_n = 1 << nk->n.width; +- _nk.min_k = 1; ++ _nk.min_k = nk->k.min; + _nk.max_k = 1 << nk->k.width; + + ccu_nk_find_best(parent_rate, rate, &_nk); +--- a/drivers/clk/sunxi-ng/ccu_nkm.c ++++ b/drivers/clk/sunxi-ng/ccu_nkm.c +@@ -100,9 +100,9 @@ static unsigned long ccu_nkm_round_rate( + struct ccu_nkm *nkm = data; + struct _ccu_nkm _nkm; + +- _nkm.min_n = 1; ++ _nkm.min_n = nkm->n.min; + _nkm.max_n = 1 << nkm->n.width; +- _nkm.min_k = 1; ++ _nkm.min_k = nkm->k.min; + _nkm.max_k = 1 << nkm->k.width; + _nkm.min_m = 1; + _nkm.max_m = nkm->m.max ?: 1 << nkm->m.width; +@@ -129,9 +129,9 @@ static int ccu_nkm_set_rate(struct clk_h + unsigned long flags; + u32 reg; + +- _nkm.min_n = 1; ++ _nkm.min_n = nkm->n.min; + _nkm.max_n = 1 << nkm->n.width; +- _nkm.min_k = 1; ++ _nkm.min_k = nkm->k.min; + _nkm.max_k = 1 << nkm->k.width; + _nkm.min_m = 1; + _nkm.max_m = nkm->m.max ?: 1 << nkm->m.width; +--- a/drivers/clk/sunxi-ng/ccu_nkmp.c ++++ b/drivers/clk/sunxi-ng/ccu_nkmp.c +@@ -107,9 +107,9 @@ static long ccu_nkmp_round_rate(struct c + struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw); + struct _ccu_nkmp _nkmp; + +- _nkmp.min_n = 1; ++ _nkmp.min_n = nkmp->n.min; + _nkmp.max_n = 1 << nkmp->n.width; +- _nkmp.min_k = 1; ++ _nkmp.min_k = nkmp->k.min; + _nkmp.max_k = 1 << nkmp->k.width; + _nkmp.min_m = 1; + _nkmp.max_m = nkmp->m.max ?: 1 << nkmp->m.width; +--- a/drivers/clk/sunxi-ng/ccu_nm.c ++++ b/drivers/clk/sunxi-ng/ccu_nm.c +@@ -93,7 +93,7 @@ static long ccu_nm_round_rate(struct clk + struct ccu_nm *nm = hw_to_ccu_nm(hw); + struct _ccu_nm _nm; + +- _nm.min_n = 1; ++ _nm.min_n = nm->n.min; + _nm.max_n = 1 << nm->n.width; + _nm.min_m = 1; + _nm.max_m = nm->m.max ?: 1 << nm->m.width; diff --git a/target/linux/sunxi/patches-4.9/0007-clk-sunxi-ng-Add-A64-clocks.patch b/target/linux/sunxi/patches-4.9/0007-clk-sunxi-ng-Add-A64-clocks.patch new file mode 100644 index 0000000000..fa0bae92b4 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0007-clk-sunxi-ng-Add-A64-clocks.patch @@ -0,0 +1,1295 @@ +From c6a0637460c29799f1e63a6a4a65bda22caf4a54 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Wed, 6 Jul 2016 08:31:34 +0200 +Subject: clk: sunxi-ng: Add A64 clocks + +Add the A64 CCU clocks set. + +Acked-by: Rob Herring +Acked-by: Chen-Yu Tsai +Signed-off-by: Maxime Ripard +--- + .../devicetree/bindings/clock/sunxi-ccu.txt | 1 + + drivers/clk/sunxi-ng/Kconfig | 11 + + drivers/clk/sunxi-ng/Makefile | 1 + + drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 915 +++++++++++++++++++++ + drivers/clk/sunxi-ng/ccu-sun50i-a64.h | 72 ++ + include/dt-bindings/clock/sun50i-a64-ccu.h | 134 +++ + include/dt-bindings/reset/sun50i-a64-ccu.h | 98 +++ + 7 files changed, 1232 insertions(+) + create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.c + create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.h + create mode 100644 include/dt-bindings/clock/sun50i-a64-ccu.h + create mode 100644 include/dt-bindings/reset/sun50i-a64-ccu.h + +--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt ++++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +@@ -7,6 +7,7 @@ Required properties : + - "allwinner,sun8i-a23-ccu" + - "allwinner,sun8i-a33-ccu" + - "allwinner,sun8i-h3-ccu" ++ - "allwinner,sun50i-a64-ccu" + + - reg: Must contain the registers base address and length + - clocks: phandle to the oscillators feeding the CCU. Two are needed: +--- a/drivers/clk/sunxi-ng/Kconfig ++++ b/drivers/clk/sunxi-ng/Kconfig +@@ -53,6 +53,17 @@ config SUNXI_CCU_MP + + # SoC Drivers + ++config SUN50I_A64_CCU ++ bool "Support for the Allwinner A64 CCU" ++ select SUNXI_CCU_DIV ++ select SUNXI_CCU_NK ++ select SUNXI_CCU_NKM ++ select SUNXI_CCU_NKMP ++ select SUNXI_CCU_NM ++ select SUNXI_CCU_MP ++ select SUNXI_CCU_PHASE ++ default ARM64 && ARCH_SUNXI ++ + config SUN6I_A31_CCU + bool "Support for the Allwinner A31/A31s CCU" + select SUNXI_CCU_DIV +--- a/drivers/clk/sunxi-ng/Makefile ++++ b/drivers/clk/sunxi-ng/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_SUNXI_CCU_NM) += ccu_nm.o + obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o + + # SoC support ++obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o + obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o + obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o + obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o +--- /dev/null ++++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c +@@ -0,0 +1,915 @@ ++/* ++ * Copyright (c) 2016 Maxime Ripard. All rights reserved. ++ * ++ * This software is licensed under the terms of the GNU General Public ++ * License version 2, as published by the Free Software Foundation, and ++ * may be copied, distributed, and modified under those terms. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++ ++#include "ccu_common.h" ++#include "ccu_reset.h" ++ ++#include "ccu_div.h" ++#include "ccu_gate.h" ++#include "ccu_mp.h" ++#include "ccu_mult.h" ++#include "ccu_nk.h" ++#include "ccu_nkm.h" ++#include "ccu_nkmp.h" ++#include "ccu_nm.h" ++#include "ccu_phase.h" ++ ++#include "ccu-sun50i-a64.h" ++ ++static struct ccu_nkmp pll_cpux_clk = { ++ .enable = BIT(31), ++ .lock = BIT(28), ++ .n = _SUNXI_CCU_MULT(8, 5), ++ .k = _SUNXI_CCU_MULT(4, 2), ++ .m = _SUNXI_CCU_DIV(0, 2), ++ .p = _SUNXI_CCU_DIV_MAX(16, 2, 4), ++ .common = { ++ .reg = 0x000, ++ .hw.init = CLK_HW_INIT("pll-cpux", ++ "osc24M", ++ &ccu_nkmp_ops, ++ CLK_SET_RATE_UNGATE), ++ }, ++}; ++ ++/* ++ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from ++ * the base (2x, 4x and 8x), and one variable divider (the one true ++ * pll audio). ++ * ++ * We don't have any need for the variable divider for now, so we just ++ * hardcode it to match with the clock names ++ */ ++#define SUN50I_A64_PLL_AUDIO_REG 0x008 ++ ++static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base", ++ "osc24M", 0x008, ++ 8, 7, /* N */ ++ 0, 5, /* M */ ++ BIT(31), /* gate */ ++ BIT(28), /* lock */ ++ CLK_SET_RATE_UNGATE); ++ ++static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0", ++ "osc24M", 0x010, ++ 8, 7, /* N */ ++ 0, 4, /* M */ ++ BIT(24), /* frac enable */ ++ BIT(25), /* frac select */ ++ 270000000, /* frac rate 0 */ ++ 297000000, /* frac rate 1 */ ++ BIT(31), /* gate */ ++ BIT(28), /* lock */ ++ CLK_SET_RATE_UNGATE); ++ ++static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve", ++ "osc24M", 0x018, ++ 8, 7, /* N */ ++ 0, 4, /* M */ ++ BIT(24), /* frac enable */ ++ BIT(25), /* frac select */ ++ 270000000, /* frac rate 0 */ ++ 297000000, /* frac rate 1 */ ++ BIT(31), /* gate */ ++ BIT(28), /* lock */ ++ CLK_SET_RATE_UNGATE); ++ ++static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0", ++ "osc24M", 0x020, ++ 8, 5, /* N */ ++ 4, 2, /* K */ ++ 0, 2, /* M */ ++ BIT(31), /* gate */ ++ BIT(28), /* lock */ ++ CLK_SET_RATE_UNGATE); ++ ++static struct ccu_nk pll_periph0_clk = { ++ .enable = BIT(31), ++ .lock = BIT(28), ++ .n = _SUNXI_CCU_MULT(8, 5), ++ .k = _SUNXI_CCU_MULT_MIN(4, 2, 2), ++ .fixed_post_div = 2, ++ .common = { ++ .reg = 0x028, ++ .features = CCU_FEATURE_FIXED_POSTDIV, ++ .hw.init = CLK_HW_INIT("pll-periph0", "osc24M", ++ &ccu_nk_ops, CLK_SET_RATE_UNGATE), ++ }, ++}; ++ ++static struct ccu_nk pll_periph1_clk = { ++ .enable = BIT(31), ++ .lock = BIT(28), ++ .n = _SUNXI_CCU_MULT(8, 5), ++ .k = _SUNXI_CCU_MULT_MIN(4, 2, 2), ++ .fixed_post_div = 2, ++ .common = { ++ .reg = 0x02c, ++ .features = CCU_FEATURE_FIXED_POSTDIV, ++ .hw.init = CLK_HW_INIT("pll-periph1", "osc24M", ++ &ccu_nk_ops, CLK_SET_RATE_UNGATE), ++ }, ++}; ++ ++static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1", ++ "osc24M", 0x030, ++ 8, 7, /* N */ ++ 0, 4, /* M */ ++ BIT(24), /* frac enable */ ++ BIT(25), /* frac select */ ++ 270000000, /* frac rate 0 */ ++ 297000000, /* frac rate 1 */ ++ BIT(31), /* gate */ ++ BIT(28), /* lock */ ++ CLK_SET_RATE_UNGATE); ++ ++static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu", ++ "osc24M", 0x038, ++ 8, 7, /* N */ ++ 0, 4, /* M */ ++ BIT(24), /* frac enable */ ++ BIT(25), /* frac select */ ++ 270000000, /* frac rate 0 */ ++ 297000000, /* frac rate 1 */ ++ BIT(31), /* gate */ ++ BIT(28), /* lock */ ++ CLK_SET_RATE_UNGATE); ++ ++/* ++ * The output function can be changed to something more complex that ++ * we do not handle yet. ++ * ++ * Hardcode the mode so that we don't fall in that case. ++ */ ++#define SUN50I_A64_PLL_MIPI_REG 0x040 ++ ++struct ccu_nkm pll_mipi_clk = { ++ .enable = BIT(31), ++ .lock = BIT(28), ++ .n = _SUNXI_CCU_MULT(8, 4), ++ .k = _SUNXI_CCU_MULT_MIN(4, 2, 2), ++ .m = _SUNXI_CCU_DIV(0, 4), ++ .common = { ++ .reg = 0x040, ++ .hw.init = CLK_HW_INIT("pll-mipi", "pll-video0", ++ &ccu_nkm_ops, CLK_SET_RATE_UNGATE), ++ }, ++}; ++ ++static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_hsic_clk, "pll-hsic", ++ "osc24M", 0x044, ++ 8, 7, /* N */ ++ 0, 4, /* M */ ++ BIT(24), /* frac enable */ ++ BIT(25), /* frac select */ ++ 270000000, /* frac rate 0 */ ++ 297000000, /* frac rate 1 */ ++ BIT(31), /* gate */ ++ BIT(28), /* lock */ ++ CLK_SET_RATE_UNGATE); ++ ++static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de", ++ "osc24M", 0x048, ++ 8, 7, /* N */ ++ 0, 4, /* M */ ++ BIT(24), /* frac enable */ ++ BIT(25), /* frac select */ ++ 270000000, /* frac rate 0 */ ++ 297000000, /* frac rate 1 */ ++ BIT(31), /* gate */ ++ BIT(28), /* lock */ ++ CLK_SET_RATE_UNGATE); ++ ++static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1", ++ "osc24M", 0x04c, ++ 8, 7, /* N */ ++ 0, 2, /* M */ ++ BIT(31), /* gate */ ++ BIT(28), /* lock */ ++ CLK_SET_RATE_UNGATE); ++ ++static const char * const cpux_parents[] = { "osc32k", "osc24M", ++ "pll-cpux" , "pll-cpux" }; ++static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents, ++ 0x050, 16, 2, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL); ++ ++static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0); ++ ++static const char * const ahb1_parents[] = { "osc32k", "osc24M", ++ "axi" , "pll-periph0" }; ++static struct ccu_div ahb1_clk = { ++ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO), ++ ++ .mux = { ++ .shift = 12, ++ .width = 2, ++ ++ .variable_prediv = { ++ .index = 3, ++ .shift = 6, ++ .width = 2, ++ }, ++ }, ++ ++ .common = { ++ .reg = 0x054, ++ .features = CCU_FEATURE_VARIABLE_PREDIV, ++ .hw.init = CLK_HW_INIT_PARENTS("ahb1", ++ ahb1_parents, ++ &ccu_div_ops, ++ 0), ++ }, ++}; ++ ++static struct clk_div_table apb1_div_table[] = { ++ { .val = 0, .div = 2 }, ++ { .val = 1, .div = 2 }, ++ { .val = 2, .div = 4 }, ++ { .val = 3, .div = 8 }, ++ { /* Sentinel */ }, ++}; ++static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1", ++ 0x054, 8, 2, apb1_div_table, 0); ++ ++static const char * const apb2_parents[] = { "osc32k", "osc24M", ++ "pll-periph0-2x" , ++ "pll-periph0-2x" }; ++static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058, ++ 0, 5, /* M */ ++ 16, 2, /* P */ ++ 24, 2, /* mux */ ++ 0); ++ ++static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" }; ++static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = { ++ { .index = 1, .div = 2 }, ++}; ++static struct ccu_mux ahb2_clk = { ++ .mux = { ++ .shift = 0, ++ .width = 1, ++ .fixed_predivs = ahb2_fixed_predivs, ++ .n_predivs = ARRAY_SIZE(ahb2_fixed_predivs), ++ }, ++ ++ .common = { ++ .reg = 0x05c, ++ .features = CCU_FEATURE_FIXED_PREDIV, ++ .hw.init = CLK_HW_INIT_PARENTS("ahb2", ++ ahb2_parents, ++ &ccu_mux_ops, ++ 0), ++ }, ++}; ++ ++static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb1", ++ 0x060, BIT(1), 0); ++static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1", ++ 0x060, BIT(5), 0); ++static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1", ++ 0x060, BIT(6), 0); ++static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1", ++ 0x060, BIT(8), 0); ++static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1", ++ 0x060, BIT(9), 0); ++static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1", ++ 0x060, BIT(10), 0); ++static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1", ++ 0x060, BIT(13), 0); ++static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1", ++ 0x060, BIT(14), 0); ++static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb2", ++ 0x060, BIT(17), 0); ++static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb1", ++ 0x060, BIT(18), 0); ++static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1", ++ 0x060, BIT(19), 0); ++static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1", ++ 0x060, BIT(20), 0); ++static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1", ++ 0x060, BIT(21), 0); ++static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1", ++ 0x060, BIT(23), 0); ++static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1", ++ 0x060, BIT(24), 0); ++static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb2", ++ 0x060, BIT(25), 0); ++static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1", ++ 0x060, BIT(28), 0); ++static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb2", ++ 0x060, BIT(29), 0); ++ ++static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1", ++ 0x064, BIT(0), 0); ++static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1", ++ 0x064, BIT(3), 0); ++static SUNXI_CCU_GATE(bus_tcon1_clk, "bus-tcon1", "ahb1", ++ 0x064, BIT(4), 0); ++static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb1", ++ 0x064, BIT(5), 0); ++static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb1", ++ 0x064, BIT(8), 0); ++static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb1", ++ 0x064, BIT(11), 0); ++static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1", ++ 0x064, BIT(12), 0); ++static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1", ++ 0x064, BIT(20), 0); ++static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1", ++ 0x064, BIT(21), 0); ++static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1", ++ 0x064, BIT(22), 0); ++ ++static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1", ++ 0x068, BIT(0), 0); ++static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", ++ 0x068, BIT(1), 0); ++static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1", ++ 0x068, BIT(5), 0); ++static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", ++ 0x068, BIT(8), 0); ++static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", ++ 0x068, BIT(12), 0); ++static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", ++ 0x068, BIT(13), 0); ++static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1", ++ 0x068, BIT(14), 0); ++ ++static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", ++ 0x06c, BIT(0), 0); ++static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", ++ 0x06c, BIT(1), 0); ++static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", ++ 0x06c, BIT(2), 0); ++static SUNXI_CCU_GATE(bus_scr_clk, "bus-scr", "apb2", ++ 0x06c, BIT(5), 0); ++static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", ++ 0x06c, BIT(16), 0); ++static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", ++ 0x06c, BIT(17), 0); ++static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", ++ 0x06c, BIT(18), 0); ++static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", ++ 0x06c, BIT(19), 0); ++static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", ++ 0x06c, BIT(20), 0); ++ ++static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1", ++ 0x070, BIT(7), 0); ++ ++static struct clk_div_table ths_div_table[] = { ++ { .val = 0, .div = 1 }, ++ { .val = 1, .div = 2 }, ++ { .val = 2, .div = 4 }, ++ { .val = 3, .div = 6 }, ++}; ++static const char * const ths_parents[] = { "osc24M" }; ++static struct ccu_div ths_clk = { ++ .enable = BIT(31), ++ .div = _SUNXI_CCU_DIV_TABLE(0, 2, ths_div_table), ++ .mux = _SUNXI_CCU_MUX(24, 2), ++ .common = { ++ .reg = 0x074, ++ .hw.init = CLK_HW_INIT_PARENTS("ths", ++ ths_parents, ++ &ccu_div_ops, ++ 0), ++ }, ++}; ++ ++static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0", ++ "pll-periph1" }; ++static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080, ++ 0, 4, /* M */ ++ 16, 2, /* P */ ++ 24, 2, /* mux */ ++ BIT(31), /* gate */ ++ 0); ++ ++static const char * const mmc_default_parents[] = { "osc24M", "pll-periph0-2x", ++ "pll-periph1-2x" }; ++static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mmc_default_parents, 0x088, ++ 0, 4, /* M */ ++ 16, 2, /* P */ ++ 24, 2, /* mux */ ++ BIT(31), /* gate */ ++ 0); ++ ++static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mmc_default_parents, 0x08c, ++ 0, 4, /* M */ ++ 16, 2, /* P */ ++ 24, 2, /* mux */ ++ BIT(31), /* gate */ ++ 0); ++ ++static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mmc_default_parents, 0x090, ++ 0, 4, /* M */ ++ 16, 2, /* P */ ++ 24, 2, /* mux */ ++ BIT(31), /* gate */ ++ 0); ++ ++static const char * const ts_parents[] = { "osc24M", "pll-periph0", }; ++static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098, ++ 0, 4, /* M */ ++ 16, 2, /* P */ ++ 24, 4, /* mux */ ++ BIT(31), /* gate */ ++ 0); ++ ++static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", mmc_default_parents, 0x09c, ++ 0, 4, /* M */ ++ 16, 2, /* P */ ++ 24, 2, /* mux */ ++ BIT(31), /* gate */ ++ 0); ++ ++static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0, ++ 0, 4, /* M */ ++ 16, 2, /* P */ ++ 24, 2, /* mux */ ++ BIT(31), /* gate */ ++ 0); ++ ++static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4, ++ 0, 4, /* M */ ++ 16, 2, /* P */ ++ 24, 2, /* mux */ ++ BIT(31), /* gate */ ++ 0); ++ ++static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x", ++ "pll-audio-2x", "pll-audio" }; ++static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents, ++ 0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT); ++ ++static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents, ++ 0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT); ++ ++static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents, ++ 0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT); ++ ++static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio", ++ 0x0c0, 0, 4, BIT(31), CLK_SET_RATE_PARENT); ++ ++static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", ++ 0x0cc, BIT(8), 0); ++static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", ++ 0x0cc, BIT(9), 0); ++static SUNXI_CCU_GATE(usb_hsic_clk, "usb-hsic", "pll-hsic", ++ 0x0cc, BIT(10), 0); ++static SUNXI_CCU_GATE(usb_hsic_12m_clk, "usb-hsic-12M", "osc12M", ++ 0x0cc, BIT(11), 0); ++static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", ++ 0x0cc, BIT(16), 0); ++static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "usb-ohci0", ++ 0x0cc, BIT(17), 0); ++ ++static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" }; ++static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents, ++ 0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL); ++ ++static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram", ++ 0x100, BIT(0), 0); ++static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "dram", ++ 0x100, BIT(1), 0); ++static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram", ++ 0x100, BIT(2), 0); ++static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram", ++ 0x100, BIT(3), 0); ++ ++static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" }; ++static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, ++ 0x104, 0, 4, 24, 3, BIT(31), 0); ++ ++static const char * const tcon0_parents[] = { "pll-mipi", "pll-video0-2x" }; ++static const u8 tcon0_table[] = { 0, 2, }; ++static SUNXI_CCU_MUX_TABLE_WITH_GATE(tcon0_clk, "tcon0", tcon0_parents, ++ tcon0_table, 0x118, 24, 3, BIT(31), ++ CLK_SET_RATE_PARENT); ++ ++static const char * const tcon1_parents[] = { "pll-video0", "pll-video1" }; ++static const u8 tcon1_table[] = { 0, 2, }; ++struct ccu_div tcon1_clk = { ++ .enable = BIT(31), ++ .div = _SUNXI_CCU_DIV(0, 4), ++ .mux = _SUNXI_CCU_MUX_TABLE(24, 2, tcon1_table), ++ .common = { ++ .reg = 0x11c, ++ .hw.init = CLK_HW_INIT_PARENTS("tcon1", ++ tcon1_parents, ++ &ccu_div_ops, ++ CLK_SET_RATE_PARENT), ++ }, ++}; ++ ++static const char * const deinterlace_parents[] = { "pll-periph0", "pll-periph1" }; ++static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", deinterlace_parents, ++ 0x124, 0, 4, 24, 3, BIT(31), 0); ++ ++static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M", ++ 0x130, BIT(31), 0); ++ ++static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" }; ++static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents, ++ 0x134, 16, 4, 24, 3, BIT(31), 0); ++ ++static const char * const csi_mclk_parents[] = { "osc24M", "pll-video1", "pll-periph1" }; ++static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk", csi_mclk_parents, ++ 0x134, 0, 5, 8, 3, BIT(15), 0); ++ ++static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve", ++ 0x13c, 16, 3, BIT(31), 0); ++ ++static SUNXI_CCU_GATE(ac_dig_clk, "ac-dig", "pll-audio", ++ 0x140, BIT(31), CLK_SET_RATE_PARENT); ++ ++static SUNXI_CCU_GATE(ac_dig_4x_clk, "ac-dig-4x", "pll-audio-4x", ++ 0x140, BIT(30), CLK_SET_RATE_PARENT); ++ ++static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", ++ 0x144, BIT(31), 0); ++ ++static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" }; ++static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents, ++ 0x150, 0, 4, 24, 2, BIT(31), CLK_SET_RATE_PARENT); ++ ++static SUNXI_CCU_GATE(hdmi_ddc_clk, "hdmi-ddc", "osc24M", ++ 0x154, BIT(31), 0); ++ ++static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x", ++ "pll-ddr0", "pll-ddr1" }; ++static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, ++ 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL); ++ ++static const char * const dsi_dphy_parents[] = { "pll-video0", "pll-periph0" }; ++static const u8 dsi_dphy_table[] = { 0, 2, }; ++static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(dsi_dphy_clk, "dsi-dphy", ++ dsi_dphy_parents, dsi_dphy_table, ++ 0x168, 0, 4, 8, 2, BIT(31), CLK_SET_RATE_PARENT); ++ ++static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu", ++ 0x1a0, 0, 3, BIT(31), CLK_SET_RATE_PARENT); ++ ++/* Fixed Factor clocks */ ++static CLK_FIXED_FACTOR(osc12M_clk, "osc12M", "osc24M", 1, 2, 0); ++ ++/* We hardcode the divider to 4 for now */ ++static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio", ++ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT); ++static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x", ++ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT); ++static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x", ++ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT); ++static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x", ++ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT); ++static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x", ++ "pll-periph0", 1, 2, 0); ++static CLK_FIXED_FACTOR(pll_periph1_2x_clk, "pll-periph1-2x", ++ "pll-periph1", 1, 2, 0); ++static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x", ++ "pll-video0", 1, 2, CLK_SET_RATE_PARENT); ++ ++static struct ccu_common *sun50i_a64_ccu_clks[] = { ++ &pll_cpux_clk.common, ++ &pll_audio_base_clk.common, ++ &pll_video0_clk.common, ++ &pll_ve_clk.common, ++ &pll_ddr0_clk.common, ++ &pll_periph0_clk.common, ++ &pll_periph1_clk.common, ++ &pll_video1_clk.common, ++ &pll_gpu_clk.common, ++ &pll_mipi_clk.common, ++ &pll_hsic_clk.common, ++ &pll_de_clk.common, ++ &pll_ddr1_clk.common, ++ &cpux_clk.common, ++ &axi_clk.common, ++ &ahb1_clk.common, ++ &apb1_clk.common, ++ &apb2_clk.common, ++ &ahb2_clk.common, ++ &bus_mipi_dsi_clk.common, ++ &bus_ce_clk.common, ++ &bus_dma_clk.common, ++ &bus_mmc0_clk.common, ++ &bus_mmc1_clk.common, ++ &bus_mmc2_clk.common, ++ &bus_nand_clk.common, ++ &bus_dram_clk.common, ++ &bus_emac_clk.common, ++ &bus_ts_clk.common, ++ &bus_hstimer_clk.common, ++ &bus_spi0_clk.common, ++ &bus_spi1_clk.common, ++ &bus_otg_clk.common, ++ &bus_ehci0_clk.common, ++ &bus_ehci1_clk.common, ++ &bus_ohci0_clk.common, ++ &bus_ohci1_clk.common, ++ &bus_ve_clk.common, ++ &bus_tcon0_clk.common, ++ &bus_tcon1_clk.common, ++ &bus_deinterlace_clk.common, ++ &bus_csi_clk.common, ++ &bus_hdmi_clk.common, ++ &bus_de_clk.common, ++ &bus_gpu_clk.common, ++ &bus_msgbox_clk.common, ++ &bus_spinlock_clk.common, ++ &bus_codec_clk.common, ++ &bus_spdif_clk.common, ++ &bus_pio_clk.common, ++ &bus_ths_clk.common, ++ &bus_i2s0_clk.common, ++ &bus_i2s1_clk.common, ++ &bus_i2s2_clk.common, ++ &bus_i2c0_clk.common, ++ &bus_i2c1_clk.common, ++ &bus_i2c2_clk.common, ++ &bus_scr_clk.common, ++ &bus_uart0_clk.common, ++ &bus_uart1_clk.common, ++ &bus_uart2_clk.common, ++ &bus_uart3_clk.common, ++ &bus_uart4_clk.common, ++ &bus_dbg_clk.common, ++ &ths_clk.common, ++ &nand_clk.common, ++ &mmc0_clk.common, ++ &mmc1_clk.common, ++ &mmc2_clk.common, ++ &ts_clk.common, ++ &ce_clk.common, ++ &spi0_clk.common, ++ &spi1_clk.common, ++ &i2s0_clk.common, ++ &i2s1_clk.common, ++ &i2s2_clk.common, ++ &spdif_clk.common, ++ &usb_phy0_clk.common, ++ &usb_phy1_clk.common, ++ &usb_hsic_clk.common, ++ &usb_hsic_12m_clk.common, ++ &usb_ohci0_clk.common, ++ &usb_ohci1_clk.common, ++ &dram_clk.common, ++ &dram_ve_clk.common, ++ &dram_csi_clk.common, ++ &dram_deinterlace_clk.common, ++ &dram_ts_clk.common, ++ &de_clk.common, ++ &tcon0_clk.common, ++ &tcon1_clk.common, ++ &deinterlace_clk.common, ++ &csi_misc_clk.common, ++ &csi_sclk_clk.common, ++ &csi_mclk_clk.common, ++ &ve_clk.common, ++ &ac_dig_clk.common, ++ &ac_dig_4x_clk.common, ++ &avs_clk.common, ++ &hdmi_clk.common, ++ &hdmi_ddc_clk.common, ++ &mbus_clk.common, ++ &dsi_dphy_clk.common, ++ &gpu_clk.common, ++}; ++ ++static struct clk_hw_onecell_data sun50i_a64_hw_clks = { ++ .hws = { ++ [CLK_OSC_12M] = &osc12M_clk.hw, ++ [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw, ++ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw, ++ [CLK_PLL_AUDIO] = &pll_audio_clk.hw, ++ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw, ++ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw, ++ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw, ++ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw, ++ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw, ++ [CLK_PLL_VE] = &pll_ve_clk.common.hw, ++ [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw, ++ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw, ++ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw, ++ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw, ++ [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw, ++ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw, ++ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw, ++ [CLK_PLL_MIPI] = &pll_mipi_clk.common.hw, ++ [CLK_PLL_HSIC] = &pll_hsic_clk.common.hw, ++ [CLK_PLL_DE] = &pll_de_clk.common.hw, ++ [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw, ++ [CLK_CPUX] = &cpux_clk.common.hw, ++ [CLK_AXI] = &axi_clk.common.hw, ++ [CLK_AHB1] = &ahb1_clk.common.hw, ++ [CLK_APB1] = &apb1_clk.common.hw, ++ [CLK_APB2] = &apb2_clk.common.hw, ++ [CLK_AHB2] = &ahb2_clk.common.hw, ++ [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw, ++ [CLK_BUS_CE] = &bus_ce_clk.common.hw, ++ [CLK_BUS_DMA] = &bus_dma_clk.common.hw, ++ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw, ++ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw, ++ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw, ++ [CLK_BUS_NAND] = &bus_nand_clk.common.hw, ++ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw, ++ [CLK_BUS_EMAC] = &bus_emac_clk.common.hw, ++ [CLK_BUS_TS] = &bus_ts_clk.common.hw, ++ [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw, ++ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw, ++ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw, ++ [CLK_BUS_OTG] = &bus_otg_clk.common.hw, ++ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw, ++ [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw, ++ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw, ++ [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw, ++ [CLK_BUS_VE] = &bus_ve_clk.common.hw, ++ [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw, ++ [CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw, ++ [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw, ++ [CLK_BUS_CSI] = &bus_csi_clk.common.hw, ++ [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw, ++ [CLK_BUS_DE] = &bus_de_clk.common.hw, ++ [CLK_BUS_GPU] = &bus_gpu_clk.common.hw, ++ [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw, ++ [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw, ++ [CLK_BUS_CODEC] = &bus_codec_clk.common.hw, ++ [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw, ++ [CLK_BUS_PIO] = &bus_pio_clk.common.hw, ++ [CLK_BUS_THS] = &bus_ths_clk.common.hw, ++ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw, ++ [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw, ++ [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw, ++ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw, ++ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw, ++ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw, ++ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw, ++ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw, ++ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw, ++ [CLK_BUS_UART3] = &bus_uart3_clk.common.hw, ++ [CLK_BUS_UART4] = &bus_uart4_clk.common.hw, ++ [CLK_BUS_SCR] = &bus_scr_clk.common.hw, ++ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw, ++ [CLK_THS] = &ths_clk.common.hw, ++ [CLK_NAND] = &nand_clk.common.hw, ++ [CLK_MMC0] = &mmc0_clk.common.hw, ++ [CLK_MMC1] = &mmc1_clk.common.hw, ++ [CLK_MMC2] = &mmc2_clk.common.hw, ++ [CLK_TS] = &ts_clk.common.hw, ++ [CLK_CE] = &ce_clk.common.hw, ++ [CLK_SPI0] = &spi0_clk.common.hw, ++ [CLK_SPI1] = &spi1_clk.common.hw, ++ [CLK_I2S0] = &i2s0_clk.common.hw, ++ [CLK_I2S1] = &i2s1_clk.common.hw, ++ [CLK_I2S2] = &i2s2_clk.common.hw, ++ [CLK_SPDIF] = &spdif_clk.common.hw, ++ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw, ++ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw, ++ [CLK_USB_HSIC] = &usb_hsic_clk.common.hw, ++ [CLK_USB_HSIC_12M] = &usb_hsic_12m_clk.common.hw, ++ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw, ++ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw, ++ [CLK_DRAM] = &dram_clk.common.hw, ++ [CLK_DRAM_VE] = &dram_ve_clk.common.hw, ++ [CLK_DRAM_CSI] = &dram_csi_clk.common.hw, ++ [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw, ++ [CLK_DRAM_TS] = &dram_ts_clk.common.hw, ++ [CLK_DE] = &de_clk.common.hw, ++ [CLK_TCON0] = &tcon0_clk.common.hw, ++ [CLK_TCON1] = &tcon1_clk.common.hw, ++ [CLK_DEINTERLACE] = &deinterlace_clk.common.hw, ++ [CLK_CSI_MISC] = &csi_misc_clk.common.hw, ++ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw, ++ [CLK_CSI_MCLK] = &csi_mclk_clk.common.hw, ++ [CLK_VE] = &ve_clk.common.hw, ++ [CLK_AC_DIG] = &ac_dig_clk.common.hw, ++ [CLK_AC_DIG_4X] = &ac_dig_4x_clk.common.hw, ++ [CLK_AVS] = &avs_clk.common.hw, ++ [CLK_HDMI] = &hdmi_clk.common.hw, ++ [CLK_HDMI_DDC] = &hdmi_ddc_clk.common.hw, ++ [CLK_MBUS] = &mbus_clk.common.hw, ++ [CLK_DSI_DPHY] = &dsi_dphy_clk.common.hw, ++ [CLK_GPU] = &gpu_clk.common.hw, ++ }, ++ .num = CLK_NUMBER, ++}; ++ ++static struct ccu_reset_map sun50i_a64_ccu_resets[] = { ++ [RST_USB_PHY0] = { 0x0cc, BIT(0) }, ++ [RST_USB_PHY1] = { 0x0cc, BIT(1) }, ++ [RST_USB_HSIC] = { 0x0cc, BIT(2) }, ++ ++ [RST_DRAM] = { 0x0f4, BIT(31) }, ++ [RST_MBUS] = { 0x0fc, BIT(31) }, ++ ++ [RST_BUS_MIPI_DSI] = { 0x2c0, BIT(1) }, ++ [RST_BUS_CE] = { 0x2c0, BIT(5) }, ++ [RST_BUS_DMA] = { 0x2c0, BIT(6) }, ++ [RST_BUS_MMC0] = { 0x2c0, BIT(8) }, ++ [RST_BUS_MMC1] = { 0x2c0, BIT(9) }, ++ [RST_BUS_MMC2] = { 0x2c0, BIT(10) }, ++ [RST_BUS_NAND] = { 0x2c0, BIT(13) }, ++ [RST_BUS_DRAM] = { 0x2c0, BIT(14) }, ++ [RST_BUS_EMAC] = { 0x2c0, BIT(17) }, ++ [RST_BUS_TS] = { 0x2c0, BIT(18) }, ++ [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) }, ++ [RST_BUS_SPI0] = { 0x2c0, BIT(20) }, ++ [RST_BUS_SPI1] = { 0x2c0, BIT(21) }, ++ [RST_BUS_OTG] = { 0x2c0, BIT(23) }, ++ [RST_BUS_EHCI0] = { 0x2c0, BIT(24) }, ++ [RST_BUS_EHCI1] = { 0x2c0, BIT(25) }, ++ [RST_BUS_OHCI0] = { 0x2c0, BIT(28) }, ++ [RST_BUS_OHCI1] = { 0x2c0, BIT(29) }, ++ ++ [RST_BUS_VE] = { 0x2c4, BIT(0) }, ++ [RST_BUS_TCON0] = { 0x2c4, BIT(3) }, ++ [RST_BUS_TCON1] = { 0x2c4, BIT(4) }, ++ [RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) }, ++ [RST_BUS_CSI] = { 0x2c4, BIT(8) }, ++ [RST_BUS_HDMI0] = { 0x2c4, BIT(10) }, ++ [RST_BUS_HDMI1] = { 0x2c4, BIT(11) }, ++ [RST_BUS_DE] = { 0x2c4, BIT(12) }, ++ [RST_BUS_GPU] = { 0x2c4, BIT(20) }, ++ [RST_BUS_MSGBOX] = { 0x2c4, BIT(21) }, ++ [RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) }, ++ [RST_BUS_DBG] = { 0x2c4, BIT(31) }, ++ ++ [RST_BUS_LVDS] = { 0x2c8, BIT(0) }, ++ ++ [RST_BUS_CODEC] = { 0x2d0, BIT(0) }, ++ [RST_BUS_SPDIF] = { 0x2d0, BIT(1) }, ++ [RST_BUS_THS] = { 0x2d0, BIT(8) }, ++ [RST_BUS_I2S0] = { 0x2d0, BIT(12) }, ++ [RST_BUS_I2S1] = { 0x2d0, BIT(13) }, ++ [RST_BUS_I2S2] = { 0x2d0, BIT(14) }, ++ ++ [RST_BUS_I2C0] = { 0x2d8, BIT(0) }, ++ [RST_BUS_I2C1] = { 0x2d8, BIT(1) }, ++ [RST_BUS_I2C2] = { 0x2d8, BIT(2) }, ++ [RST_BUS_SCR] = { 0x2d8, BIT(5) }, ++ [RST_BUS_UART0] = { 0x2d8, BIT(16) }, ++ [RST_BUS_UART1] = { 0x2d8, BIT(17) }, ++ [RST_BUS_UART2] = { 0x2d8, BIT(18) }, ++ [RST_BUS_UART3] = { 0x2d8, BIT(19) }, ++ [RST_BUS_UART4] = { 0x2d8, BIT(20) }, ++}; ++ ++static const struct sunxi_ccu_desc sun50i_a64_ccu_desc = { ++ .ccu_clks = sun50i_a64_ccu_clks, ++ .num_ccu_clks = ARRAY_SIZE(sun50i_a64_ccu_clks), ++ ++ .hw_clks = &sun50i_a64_hw_clks, ++ ++ .resets = sun50i_a64_ccu_resets, ++ .num_resets = ARRAY_SIZE(sun50i_a64_ccu_resets), ++}; ++ ++static int sun50i_a64_ccu_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ void __iomem *reg; ++ u32 val; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ reg = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(reg)) ++ return PTR_ERR(reg); ++ ++ /* Force the PLL-Audio-1x divider to 4 */ ++ val = readl(reg + SUN50I_A64_PLL_AUDIO_REG); ++ val &= ~GENMASK(19, 16); ++ writel(val | (3 << 16), reg + SUN50I_A64_PLL_AUDIO_REG); ++ ++ writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG); ++ ++ return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc); ++} ++ ++static const struct of_device_id sun50i_a64_ccu_ids[] = { ++ { .compatible = "allwinner,sun50i-a64-ccu" }, ++ { } ++}; ++ ++static struct platform_driver sun50i_a64_ccu_driver = { ++ .probe = sun50i_a64_ccu_probe, ++ .driver = { ++ .name = "sun50i-a64-ccu", ++ .of_match_table = sun50i_a64_ccu_ids, ++ }, ++}; ++builtin_platform_driver(sun50i_a64_ccu_driver); +--- /dev/null ++++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h +@@ -0,0 +1,72 @@ ++/* ++ * Copyright 2016 Maxime Ripard ++ * ++ * Maxime Ripard ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef _CCU_SUN50I_A64_H_ ++#define _CCU_SUN50I_A64_H_ ++ ++#include ++#include ++ ++#define CLK_OSC_12M 0 ++#define CLK_PLL_CPUX 1 ++#define CLK_PLL_AUDIO_BASE 2 ++#define CLK_PLL_AUDIO 3 ++#define CLK_PLL_AUDIO_2X 4 ++#define CLK_PLL_AUDIO_4X 5 ++#define CLK_PLL_AUDIO_8X 6 ++#define CLK_PLL_VIDEO0 7 ++#define CLK_PLL_VIDEO0_2X 8 ++#define CLK_PLL_VE 9 ++#define CLK_PLL_DDR0 10 ++#define CLK_PLL_PERIPH0 11 ++#define CLK_PLL_PERIPH0_2X 12 ++#define CLK_PLL_PERIPH1 13 ++#define CLK_PLL_PERIPH1_2X 14 ++#define CLK_PLL_VIDEO1 15 ++#define CLK_PLL_GPU 16 ++#define CLK_PLL_MIPI 17 ++#define CLK_PLL_HSIC 18 ++#define CLK_PLL_DE 19 ++#define CLK_PLL_DDR1 20 ++#define CLK_CPUX 21 ++#define CLK_AXI 22 ++#define CLK_APB 23 ++#define CLK_AHB1 24 ++#define CLK_APB1 25 ++#define CLK_APB2 26 ++#define CLK_AHB2 27 ++ ++/* All the bus gates are exported */ ++ ++/* The first bunch of module clocks are exported */ ++ ++#define CLK_USB_OHCI0_12M 90 ++ ++#define CLK_USB_OHCI1_12M 92 ++ ++#define CLK_DRAM 94 ++ ++/* All the DRAM gates are exported */ ++ ++/* Some more module clocks are exported */ ++ ++#define CLK_MBUS 112 ++ ++/* And the DSI and GPU module clock is exported */ ++ ++#define CLK_NUMBER (CLK_GPU + 1) ++ ++#endif /* _CCU_SUN50I_A64_H_ */ +--- /dev/null ++++ b/include/dt-bindings/clock/sun50i-a64-ccu.h +@@ -0,0 +1,134 @@ ++/* ++ * Copyright (C) 2016 Maxime Ripard ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++#ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_ ++#define _DT_BINDINGS_CLK_SUN50I_A64_H_ ++ ++#define CLK_BUS_MIPI_DSI 28 ++#define CLK_BUS_CE 29 ++#define CLK_BUS_DMA 30 ++#define CLK_BUS_MMC0 31 ++#define CLK_BUS_MMC1 32 ++#define CLK_BUS_MMC2 33 ++#define CLK_BUS_NAND 34 ++#define CLK_BUS_DRAM 35 ++#define CLK_BUS_EMAC 36 ++#define CLK_BUS_TS 37 ++#define CLK_BUS_HSTIMER 38 ++#define CLK_BUS_SPI0 39 ++#define CLK_BUS_SPI1 40 ++#define CLK_BUS_OTG 41 ++#define CLK_BUS_EHCI0 42 ++#define CLK_BUS_EHCI1 43 ++#define CLK_BUS_OHCI0 44 ++#define CLK_BUS_OHCI1 45 ++#define CLK_BUS_VE 46 ++#define CLK_BUS_TCON0 47 ++#define CLK_BUS_TCON1 48 ++#define CLK_BUS_DEINTERLACE 49 ++#define CLK_BUS_CSI 50 ++#define CLK_BUS_HDMI 51 ++#define CLK_BUS_DE 52 ++#define CLK_BUS_GPU 53 ++#define CLK_BUS_MSGBOX 54 ++#define CLK_BUS_SPINLOCK 55 ++#define CLK_BUS_CODEC 56 ++#define CLK_BUS_SPDIF 57 ++#define CLK_BUS_PIO 58 ++#define CLK_BUS_THS 59 ++#define CLK_BUS_I2S0 60 ++#define CLK_BUS_I2S1 61 ++#define CLK_BUS_I2S2 62 ++#define CLK_BUS_I2C0 63 ++#define CLK_BUS_I2C1 64 ++#define CLK_BUS_I2C2 65 ++#define CLK_BUS_SCR 66 ++#define CLK_BUS_UART0 67 ++#define CLK_BUS_UART1 68 ++#define CLK_BUS_UART2 69 ++#define CLK_BUS_UART3 70 ++#define CLK_BUS_UART4 71 ++#define CLK_BUS_DBG 72 ++#define CLK_THS 73 ++#define CLK_NAND 74 ++#define CLK_MMC0 75 ++#define CLK_MMC1 76 ++#define CLK_MMC2 77 ++#define CLK_TS 78 ++#define CLK_CE 79 ++#define CLK_SPI0 80 ++#define CLK_SPI1 81 ++#define CLK_I2S0 82 ++#define CLK_I2S1 83 ++#define CLK_I2S2 84 ++#define CLK_SPDIF 85 ++#define CLK_USB_PHY0 86 ++#define CLK_USB_PHY1 87 ++#define CLK_USB_HSIC 88 ++#define CLK_USB_HSIC_12M 89 ++ ++#define CLK_USB_OHCI0 91 ++ ++#define CLK_USB_OHCI1 93 ++ ++#define CLK_DRAM_VE 95 ++#define CLK_DRAM_CSI 96 ++#define CLK_DRAM_DEINTERLACE 97 ++#define CLK_DRAM_TS 98 ++#define CLK_DE 99 ++#define CLK_TCON0 100 ++#define CLK_TCON1 101 ++#define CLK_DEINTERLACE 102 ++#define CLK_CSI_MISC 103 ++#define CLK_CSI_SCLK 104 ++#define CLK_CSI_MCLK 105 ++#define CLK_VE 106 ++#define CLK_AC_DIG 107 ++#define CLK_AC_DIG_4X 108 ++#define CLK_AVS 109 ++#define CLK_HDMI 110 ++#define CLK_HDMI_DDC 111 ++ ++#define CLK_DSI_DPHY 113 ++#define CLK_GPU 114 ++ ++#endif /* _DT_BINDINGS_CLK_SUN50I_H_ */ +--- /dev/null ++++ b/include/dt-bindings/reset/sun50i-a64-ccu.h +@@ -0,0 +1,98 @@ ++/* ++ * Copyright (C) 2016 Maxime Ripard ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++#ifndef _DT_BINDINGS_RST_SUN50I_A64_H_ ++#define _DT_BINDINGS_RST_SUN50I_A64_H_ ++ ++#define RST_USB_PHY0 0 ++#define RST_USB_PHY1 1 ++#define RST_USB_HSIC 2 ++#define RST_DRAM 3 ++#define RST_MBUS 4 ++#define RST_BUS_MIPI_DSI 5 ++#define RST_BUS_CE 6 ++#define RST_BUS_DMA 7 ++#define RST_BUS_MMC0 8 ++#define RST_BUS_MMC1 9 ++#define RST_BUS_MMC2 10 ++#define RST_BUS_NAND 11 ++#define RST_BUS_DRAM 12 ++#define RST_BUS_EMAC 13 ++#define RST_BUS_TS 14 ++#define RST_BUS_HSTIMER 15 ++#define RST_BUS_SPI0 16 ++#define RST_BUS_SPI1 17 ++#define RST_BUS_OTG 18 ++#define RST_BUS_EHCI0 19 ++#define RST_BUS_EHCI1 20 ++#define RST_BUS_OHCI0 21 ++#define RST_BUS_OHCI1 22 ++#define RST_BUS_VE 23 ++#define RST_BUS_TCON0 24 ++#define RST_BUS_TCON1 25 ++#define RST_BUS_DEINTERLACE 26 ++#define RST_BUS_CSI 27 ++#define RST_BUS_HDMI0 28 ++#define RST_BUS_HDMI1 29 ++#define RST_BUS_DE 30 ++#define RST_BUS_GPU 31 ++#define RST_BUS_MSGBOX 32 ++#define RST_BUS_SPINLOCK 33 ++#define RST_BUS_DBG 34 ++#define RST_BUS_LVDS 35 ++#define RST_BUS_CODEC 36 ++#define RST_BUS_SPDIF 37 ++#define RST_BUS_THS 38 ++#define RST_BUS_I2S0 39 ++#define RST_BUS_I2S1 40 ++#define RST_BUS_I2S2 41 ++#define RST_BUS_I2C0 42 ++#define RST_BUS_I2C1 43 ++#define RST_BUS_I2C2 44 ++#define RST_BUS_SCR 45 ++#define RST_BUS_UART0 46 ++#define RST_BUS_UART1 47 ++#define RST_BUS_UART2 48 ++#define RST_BUS_UART3 49 ++#define RST_BUS_UART4 50 ++ ++#endif /* _DT_BINDINGS_RST_SUN50I_A64_H_ */ diff --git a/target/linux/sunxi/patches-4.9/0010-arm64-dts-add-Allwinner-A64-SoC-.dtsi.patch b/target/linux/sunxi/patches-4.9/0010-arm64-dts-add-Allwinner-A64-SoC-.dtsi.patch new file mode 100644 index 0000000000..eaaba96fc1 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0010-arm64-dts-add-Allwinner-A64-SoC-.dtsi.patch @@ -0,0 +1,311 @@ +From 6bc37fac30cf01c39feb17834090089304bd1d31 Mon Sep 17 00:00:00 2001 +From: Andre Przywara +Date: Mon, 18 Jan 2016 10:24:31 +0000 +Subject: arm64: dts: add Allwinner A64 SoC .dtsi + +The Allwinner A64 SoC is a low-cost chip with 4 ARM Cortex-A53 cores +and the typical tablet / TV box peripherals. +The SoC is based on the (32-bit) Allwinner H3 chip, sharing most of +the peripherals and the memory map. +Although the cores are proper 64-bit ones, the whole SoC is actually +limited to 4GB (including all the supported DRAM), so we use 32-bit +address and size cells. This has the nice feature of us being able to +reuse the DT for 32-bit kernels as well. +This .dtsi lists the hardware that we support so far. + +Signed-off-by: Andre Przywara +Acked-by: Rob Herring +Acked-by: Chen-Yu Tsai +[Maxime: Convert to CCU binding, drop the MMC support for now] +Signed-off-by: Maxime Ripard +--- + Documentation/devicetree/bindings/arm/sunxi.txt | 1 + + MAINTAINERS | 1 + + arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 263 ++++++++++++++++++++++++ + 3 files changed, 265 insertions(+) + create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi + +--- a/Documentation/devicetree/bindings/arm/sunxi.txt ++++ b/Documentation/devicetree/bindings/arm/sunxi.txt +@@ -14,4 +14,5 @@ using one of the following compatible st + allwinner,sun8i-a83t + allwinner,sun8i-h3 + allwinner,sun9i-a80 ++ allwinner,sun50i-a64 + nextthing,gr8 +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -1026,6 +1026,7 @@ L: linux-arm-kernel@lists.infradead.org + S: Maintained + N: sun[x456789]i + F: arch/arm/boot/dts/ntc-gr8* ++F: arch/arm64/boot/dts/allwinner/ + + ARM/Allwinner SoC Clock Support + M: Emilio López +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +@@ -0,0 +1,263 @@ ++/* ++ * Copyright (C) 2016 ARM Ltd. ++ * based on the Allwinner H3 dtsi: ++ * Copyright (C) 2015 Jens Kuske ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++#include ++#include ++#include ++#include ++ ++/ { ++ interrupt-parent = <&gic>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu0: cpu@0 { ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ device_type = "cpu"; ++ reg = <0>; ++ enable-method = "psci"; ++ }; ++ ++ cpu1: cpu@1 { ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ device_type = "cpu"; ++ reg = <1>; ++ enable-method = "psci"; ++ }; ++ ++ cpu2: cpu@2 { ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ device_type = "cpu"; ++ reg = <2>; ++ enable-method = "psci"; ++ }; ++ ++ cpu3: cpu@3 { ++ compatible = "arm,cortex-a53", "arm,armv8"; ++ device_type = "cpu"; ++ reg = <3>; ++ enable-method = "psci"; ++ }; ++ }; ++ ++ osc24M: osc24M_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <24000000>; ++ clock-output-names = "osc24M"; ++ }; ++ ++ osc32k: osc32k_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++ clock-output-names = "osc32k"; ++ }; ++ ++ psci { ++ compatible = "arm,psci-0.2"; ++ method = "smc"; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ }; ++ ++ soc { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ++ ccu: clock@01c20000 { ++ compatible = "allwinner,sun50i-a64-ccu"; ++ reg = <0x01c20000 0x400>; ++ clocks = <&osc24M>, <&osc32k>; ++ clock-names = "hosc", "losc"; ++ #clock-cells = <1>; ++ #reset-cells = <1>; ++ }; ++ ++ pio: pinctrl@1c20800 { ++ compatible = "allwinner,sun50i-a64-pinctrl"; ++ reg = <0x01c20800 0x400>; ++ interrupts = , ++ , ++ ; ++ clocks = <&ccu CLK_BUS_PIO>; ++ gpio-controller; ++ #gpio-cells = <3>; ++ interrupt-controller; ++ #interrupt-cells = <3>; ++ ++ i2c1_pins: i2c1_pins { ++ pins = "PH2", "PH3"; ++ function = "i2c1"; ++ }; ++ ++ uart0_pins_a: uart0@0 { ++ pins = "PB8", "PB9"; ++ function = "uart0"; ++ }; ++ }; ++ ++ uart0: serial@1c28000 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x01c28000 0x400>; ++ interrupts = ; ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ clocks = <&ccu CLK_BUS_UART0>; ++ resets = <&ccu RST_BUS_UART0>; ++ status = "disabled"; ++ }; ++ ++ uart1: serial@1c28400 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x01c28400 0x400>; ++ interrupts = ; ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ clocks = <&ccu CLK_BUS_UART1>; ++ resets = <&ccu RST_BUS_UART1>; ++ status = "disabled"; ++ }; ++ ++ uart2: serial@1c28800 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x01c28800 0x400>; ++ interrupts = ; ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ clocks = <&ccu CLK_BUS_UART2>; ++ resets = <&ccu RST_BUS_UART2>; ++ status = "disabled"; ++ }; ++ ++ uart3: serial@1c28c00 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x01c28c00 0x400>; ++ interrupts = ; ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ clocks = <&ccu CLK_BUS_UART3>; ++ resets = <&ccu RST_BUS_UART3>; ++ status = "disabled"; ++ }; ++ ++ uart4: serial@1c29000 { ++ compatible = "snps,dw-apb-uart"; ++ reg = <0x01c29000 0x400>; ++ interrupts = ; ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ clocks = <&ccu CLK_BUS_UART4>; ++ resets = <&ccu RST_BUS_UART4>; ++ status = "disabled"; ++ }; ++ ++ i2c0: i2c@1c2ac00 { ++ compatible = "allwinner,sun6i-a31-i2c"; ++ reg = <0x01c2ac00 0x400>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_I2C0>; ++ resets = <&ccu RST_BUS_I2C0>; ++ status = "disabled"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ i2c1: i2c@1c2b000 { ++ compatible = "allwinner,sun6i-a31-i2c"; ++ reg = <0x01c2b000 0x400>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_I2C1>; ++ resets = <&ccu RST_BUS_I2C1>; ++ status = "disabled"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ i2c2: i2c@1c2b400 { ++ compatible = "allwinner,sun6i-a31-i2c"; ++ reg = <0x01c2b400 0x400>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_I2C2>; ++ resets = <&ccu RST_BUS_I2C2>; ++ status = "disabled"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ gic: interrupt-controller@1c81000 { ++ compatible = "arm,gic-400"; ++ reg = <0x01c81000 0x1000>, ++ <0x01c82000 0x2000>, ++ <0x01c84000 0x2000>, ++ <0x01c86000 0x2000>; ++ interrupts = ; ++ interrupt-controller; ++ #interrupt-cells = <3>; ++ }; ++ ++ rtc: rtc@1f00000 { ++ compatible = "allwinner,sun6i-a31-rtc"; ++ reg = <0x01f00000 0x54>; ++ interrupts = , ++ ; ++ }; ++ }; ++}; diff --git a/target/linux/sunxi/patches-4.9/0011-arm64-dts-add-Pine64-support.patch b/target/linux/sunxi/patches-4.9/0011-arm64-dts-add-Pine64-support.patch new file mode 100644 index 0000000000..9960588ab8 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0011-arm64-dts-add-Pine64-support.patch @@ -0,0 +1,176 @@ +From 4e3886081848b7ea16452a92c4324acaab644d49 Mon Sep 17 00:00:00 2001 +From: Andre Przywara +Date: Tue, 19 Jan 2016 10:36:39 +0000 +Subject: arm64: dts: add Pine64 support + +The Pine64 is a cost-efficient development board based on the +Allwinner A64 SoC. +There are three models: the basic version with Fast Ethernet and +512 MB of DRAM (Pine64) and two Pine64+ versions, which both +feature Gigabit Ethernet and additional connectors for touchscreens +and a camera. Or as my son put it: "Those are smaller and these are +missing." ;-) +The two Pine64+ models just differ in the amount of DRAM +(1GB vs. 2GB). Since U-Boot will figure out the right size for us and +patches the DT accordingly we just need to provide one DT for the +Pine64+. + +Signed-off-by: Andre Przywara +[Maxime: Removed the common DTSI and include directly the pine64 DTS] +Signed-off-by: Maxime Ripard +--- + arch/arm64/boot/dts/Makefile | 1 + + arch/arm64/boot/dts/allwinner/Makefile | 5 ++ + .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 50 +++++++++++++++ + .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 74 ++++++++++++++++++++++ + 4 files changed, 130 insertions(+) + create mode 100644 arch/arm64/boot/dts/allwinner/Makefile + create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts + create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts + +--- a/arch/arm64/boot/dts/Makefile ++++ b/arch/arm64/boot/dts/Makefile +@@ -1,4 +1,5 @@ + dts-dirs += al ++dts-dirs += allwinner + dts-dirs += altera + dts-dirs += amd + dts-dirs += amlogic +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/Makefile +@@ -0,0 +1,5 @@ ++dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb ++ ++always := $(dtb-y) ++subdir-y := $(dts-dirs) ++clean-files := *.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts +@@ -0,0 +1,50 @@ ++/* ++ * Copyright (c) 2016 ARM Ltd. ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++#include "sun50i-a64-pine64.dts" ++ ++/ { ++ model = "Pine64+"; ++ compatible = "pine64,pine64-plus", "allwinner,sun50i-a64"; ++ ++ /* TODO: Camera, Ethernet PHY, touchscreen, etc. */ ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +@@ -0,0 +1,74 @@ ++/* ++ * Copyright (c) 2016 ARM Ltd. ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++ ++#include "sun50i-a64.dtsi" ++ ++/ { ++ model = "Pine64"; ++ compatible = "pine64,pine64", "allwinner,sun50i-a64"; ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ status = "okay"; ++}; ++ ++&i2c1_pins { ++ bias-pull-up; ++}; diff --git a/target/linux/sunxi/patches-4.9/0012-arm64-dts-fix-build-errors-from-missing-dependencies.patch b/target/linux/sunxi/patches-4.9/0012-arm64-dts-fix-build-errors-from-missing-dependencies.patch new file mode 100644 index 0000000000..1719b682b3 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0012-arm64-dts-fix-build-errors-from-missing-dependencies.patch @@ -0,0 +1,134 @@ +From f98121f3ef3d36f4d040b11ab38f15387f6eefa2 Mon Sep 17 00:00:00 2001 +From: Arnd Bergmann +Date: Wed, 30 Nov 2016 15:08:55 +0100 +Subject: arm64: dts: fix build errors from missing dependencies + +Two branches were incorrectly sent without having the necessary +header file changes. Rather than back those out now, I'm replacing +the symbolic names for the clks and resets with the numeric +values to get 'make allmodconfig dtbs' back to work. + +After the header file changes are merged, we can revert this +patch. + +Fixes: 6bc37fa ("arm64: dts: add Allwinner A64 SoC .dtsi") +Fixes: 50784e6 ("dts: arm64: db820c: add pmic pins specific dts file") +Acked-by: Andre Przywara +Acked-by: Maxime Ripard +Acked-by: Srinivas Kandagatla +Signed-off-by: Arnd Bergmann +--- + arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 36 ++++++++++------------ + .../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 2 +- + 2 files changed, 18 insertions(+), 20 deletions(-) + +--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi ++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +@@ -42,10 +42,8 @@ + * OTHER DEALINGS IN THE SOFTWARE. + */ + +-#include + #include + #include +-#include + + / { + interrupt-parent = <&gic>; +@@ -137,7 +135,7 @@ + interrupts = , + , + ; +- clocks = <&ccu CLK_BUS_PIO>; ++ clocks = <&ccu 58>; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; +@@ -160,8 +158,8 @@ + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; +- clocks = <&ccu CLK_BUS_UART0>; +- resets = <&ccu RST_BUS_UART0>; ++ clocks = <&ccu 67>; ++ resets = <&ccu 46>; + status = "disabled"; + }; + +@@ -171,8 +169,8 @@ + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; +- clocks = <&ccu CLK_BUS_UART1>; +- resets = <&ccu RST_BUS_UART1>; ++ clocks = <&ccu 68>; ++ resets = <&ccu 47>; + status = "disabled"; + }; + +@@ -182,8 +180,8 @@ + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; +- clocks = <&ccu CLK_BUS_UART2>; +- resets = <&ccu RST_BUS_UART2>; ++ clocks = <&ccu 69>; ++ resets = <&ccu 48>; + status = "disabled"; + }; + +@@ -193,8 +191,8 @@ + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; +- clocks = <&ccu CLK_BUS_UART3>; +- resets = <&ccu RST_BUS_UART3>; ++ clocks = <&ccu 70>; ++ resets = <&ccu 49>; + status = "disabled"; + }; + +@@ -204,8 +202,8 @@ + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; +- clocks = <&ccu CLK_BUS_UART4>; +- resets = <&ccu RST_BUS_UART4>; ++ clocks = <&ccu 71>; ++ resets = <&ccu 50>; + status = "disabled"; + }; + +@@ -213,8 +211,8 @@ + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = ; +- clocks = <&ccu CLK_BUS_I2C0>; +- resets = <&ccu RST_BUS_I2C0>; ++ clocks = <&ccu 63>; ++ resets = <&ccu 42>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; +@@ -224,8 +222,8 @@ + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = ; +- clocks = <&ccu CLK_BUS_I2C1>; +- resets = <&ccu RST_BUS_I2C1>; ++ clocks = <&ccu 64>; ++ resets = <&ccu 43>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; +@@ -235,8 +233,8 @@ + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = ; +- clocks = <&ccu CLK_BUS_I2C2>; +- resets = <&ccu RST_BUS_I2C2>; ++ clocks = <&ccu 65>; ++ resets = <&ccu 44>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; diff --git a/target/linux/sunxi/patches-4.9/0030-pinctrl-sunxi-Rework-the-pin-config-building-code.patch b/target/linux/sunxi/patches-4.9/0030-pinctrl-sunxi-Rework-the-pin-config-building-code.patch new file mode 100644 index 0000000000..498581712d --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0030-pinctrl-sunxi-Rework-the-pin-config-building-code.patch @@ -0,0 +1,251 @@ +From f233dbca6227703eaae2f67d6d9c79819773f16b Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Tue, 11 Oct 2016 17:45:59 +0200 +Subject: pinctrl: sunxi: Rework the pin config building code + +In order to support more easily the generic pinctrl properties, rework the +pinctrl maps configuration and split it into several sub-functions. + +One of the side-effects from that rework is that we only parse the pin +configuration once, since it's going to be common to every pin, instead of +having to parsing once for each pin. + +Signed-off-by: Maxime Ripard +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 178 +++++++++++++++++++++++++--------- + 1 file changed, 130 insertions(+), 48 deletions(-) + +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c +@@ -145,6 +145,110 @@ static int sunxi_pctrl_get_group_pins(st + return 0; + } + ++static bool sunxi_pctrl_has_bias_prop(struct device_node *node) ++{ ++ return of_find_property(node, "allwinner,pull", NULL); ++} ++ ++static bool sunxi_pctrl_has_drive_prop(struct device_node *node) ++{ ++ return of_find_property(node, "allwinner,drive", NULL); ++} ++ ++static int sunxi_pctrl_parse_bias_prop(struct device_node *node) ++{ ++ u32 val; ++ ++ if (of_property_read_u32(node, "allwinner,pull", &val)) ++ return -EINVAL; ++ ++ switch (val) { ++ case 1: ++ return PIN_CONFIG_BIAS_PULL_UP; ++ case 2: ++ return PIN_CONFIG_BIAS_PULL_DOWN; ++ } ++ ++ return -EINVAL; ++} ++ ++static int sunxi_pctrl_parse_drive_prop(struct device_node *node) ++{ ++ u32 val; ++ ++ if (of_property_read_u32(node, "allwinner,drive", &val)) ++ return -EINVAL; ++ ++ return (val + 1) * 10; ++} ++ ++static const char *sunxi_pctrl_parse_function_prop(struct device_node *node) ++{ ++ const char *function; ++ int ret; ++ ++ ret = of_property_read_string(node, "allwinner,function", &function); ++ if (!ret) ++ return function; ++ ++ return NULL; ++} ++ ++static const char *sunxi_pctrl_find_pins_prop(struct device_node *node, ++ int *npins) ++{ ++ int count; ++ ++ count = of_property_count_strings(node, "allwinner,pins"); ++ if (count > 0) { ++ *npins = count; ++ return "allwinner,pins"; ++ } ++ ++ return NULL; ++} ++ ++static unsigned long *sunxi_pctrl_build_pin_config(struct device_node *node, ++ unsigned int *len) ++{ ++ unsigned long *pinconfig; ++ unsigned int configlen = 0, idx = 0; ++ ++ if (sunxi_pctrl_has_drive_prop(node)) ++ configlen++; ++ if (sunxi_pctrl_has_bias_prop(node)) ++ configlen++; ++ ++ pinconfig = kzalloc(configlen * sizeof(*pinconfig), GFP_KERNEL); ++ if (!pinconfig) ++ return NULL; ++ ++ if (sunxi_pctrl_has_drive_prop(node)) { ++ int drive = sunxi_pctrl_parse_drive_prop(node); ++ if (drive < 0) ++ goto err_free; ++ ++ pinconfig[idx++] = pinconf_to_config_packed(PIN_CONFIG_DRIVE_STRENGTH, ++ drive); ++ } ++ ++ if (sunxi_pctrl_has_bias_prop(node)) { ++ int pull = sunxi_pctrl_parse_bias_prop(node); ++ if (pull < 0) ++ goto err_free; ++ ++ pinconfig[idx++] = pinconf_to_config_packed(pull, 0); ++ } ++ ++ ++ *len = configlen; ++ return pinconfig; ++ ++err_free: ++ kfree(pinconfig); ++ return NULL; ++} ++ + static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *node, + struct pinctrl_map **map, +@@ -153,38 +257,45 @@ static int sunxi_pctrl_dt_node_to_map(st + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + unsigned long *pinconfig; + struct property *prop; +- const char *function; ++ const char *function, *pin_prop; + const char *group; +- int ret, nmaps, i = 0; +- u32 val; ++ int ret, npins, nmaps, configlen = 0, i = 0; + + *map = NULL; + *num_maps = 0; + +- ret = of_property_read_string(node, "allwinner,function", &function); +- if (ret) { +- dev_err(pctl->dev, +- "missing allwinner,function property in node %s\n", ++ function = sunxi_pctrl_parse_function_prop(node); ++ if (!function) { ++ dev_err(pctl->dev, "missing function property in node %s\n", + node->name); + return -EINVAL; + } + +- nmaps = of_property_count_strings(node, "allwinner,pins") * 2; +- if (nmaps < 0) { +- dev_err(pctl->dev, +- "missing allwinner,pins property in node %s\n", ++ pin_prop = sunxi_pctrl_find_pins_prop(node, &npins); ++ if (!pin_prop) { ++ dev_err(pctl->dev, "missing pins property in node %s\n", + node->name); + return -EINVAL; + } + ++ /* ++ * We have two maps for each pin: one for the function, one ++ * for the configuration (bias, strength, etc) ++ */ ++ nmaps = npins * 2; + *map = kmalloc(nmaps * sizeof(struct pinctrl_map), GFP_KERNEL); + if (!*map) + return -ENOMEM; + +- of_property_for_each_string(node, "allwinner,pins", prop, group) { ++ pinconfig = sunxi_pctrl_build_pin_config(node, &configlen); ++ if (!pinconfig) { ++ ret = -EINVAL; ++ goto err_free_map; ++ } ++ ++ of_property_for_each_string(node, pin_prop, prop, group) { + struct sunxi_pinctrl_group *grp = + sunxi_pinctrl_find_group_by_name(pctl, group); +- int j = 0, configlen = 0; + + if (!grp) { + dev_err(pctl->dev, "unknown pin %s", group); +@@ -207,34 +318,6 @@ static int sunxi_pctrl_dt_node_to_map(st + + (*map)[i].type = PIN_MAP_TYPE_CONFIGS_GROUP; + (*map)[i].data.configs.group_or_pin = group; +- +- if (of_find_property(node, "allwinner,drive", NULL)) +- configlen++; +- if (of_find_property(node, "allwinner,pull", NULL)) +- configlen++; +- +- pinconfig = kzalloc(configlen * sizeof(*pinconfig), GFP_KERNEL); +- if (!pinconfig) { +- kfree(*map); +- return -ENOMEM; +- } +- +- if (!of_property_read_u32(node, "allwinner,drive", &val)) { +- u16 strength = (val + 1) * 10; +- pinconfig[j++] = +- pinconf_to_config_packed(PIN_CONFIG_DRIVE_STRENGTH, +- strength); +- } +- +- if (!of_property_read_u32(node, "allwinner,pull", &val)) { +- enum pin_config_param pull = PIN_CONFIG_END; +- if (val == 1) +- pull = PIN_CONFIG_BIAS_PULL_UP; +- else if (val == 2) +- pull = PIN_CONFIG_BIAS_PULL_DOWN; +- pinconfig[j++] = pinconf_to_config_packed(pull, 0); +- } +- + (*map)[i].data.configs.configs = pinconfig; + (*map)[i].data.configs.num_configs = configlen; + +@@ -244,19 +327,18 @@ static int sunxi_pctrl_dt_node_to_map(st + *num_maps = nmaps; + + return 0; ++ ++err_free_map: ++ kfree(map); ++ return ret; + } + + static void sunxi_pctrl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, + unsigned num_maps) + { +- int i; +- +- for (i = 0; i < num_maps; i++) { +- if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) +- kfree(map[i].data.configs.configs); +- } +- ++ /* All the maps have the same pin config, free only the first one */ ++ kfree(map[0].data.configs.configs); + kfree(map); + } + diff --git a/target/linux/sunxi/patches-4.9/0031-pinctrl-sunxi-Use-macros-from-bindings-header-file-f.patch b/target/linux/sunxi/patches-4.9/0031-pinctrl-sunxi-Use-macros-from-bindings-header-file-f.patch new file mode 100644 index 0000000000..39be965422 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0031-pinctrl-sunxi-Use-macros-from-bindings-header-file-f.patch @@ -0,0 +1,38 @@ +From 42676fa4aa87eda4fc762df495d4bde2ddc4bfce Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Tue, 11 Oct 2016 17:46:00 +0200 +Subject: pinctrl: sunxi: Use macros from bindings header file for DT parsing + +Since we have some bindings header for our hardcoded flags, let's use them +when we can. + +Acked-by: Chen-Yu Tsai +Signed-off-by: Maxime Ripard +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c +@@ -28,6 +28,8 @@ + #include + #include + ++#include ++ + #include "../core.h" + #include "pinctrl-sunxi.h" + +@@ -163,9 +165,9 @@ static int sunxi_pctrl_parse_bias_prop(s + return -EINVAL; + + switch (val) { +- case 1: ++ case SUN4I_PINCTRL_PULL_UP: + return PIN_CONFIG_BIAS_PULL_UP; +- case 2: ++ case SUN4I_PINCTRL_PULL_DOWN: + return PIN_CONFIG_BIAS_PULL_DOWN; + } + diff --git a/target/linux/sunxi/patches-4.9/0032-pinctrl-sunxi-Handle-bias-disable.patch b/target/linux/sunxi/patches-4.9/0032-pinctrl-sunxi-Handle-bias-disable.patch new file mode 100644 index 0000000000..61d6102c92 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0032-pinctrl-sunxi-Handle-bias-disable.patch @@ -0,0 +1,42 @@ +From 07fe64ba213f36ca8f6ffd8c4d5893f022744fdb Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Tue, 11 Oct 2016 17:46:01 +0200 +Subject: pinctrl: sunxi: Handle bias disable + +So far, putting NO_PULL in allwinner,pull was ignored, behaving like if +that property was not there at all. + +Obviously, this is not the right thing to do, and in that case, we really +need to just disable the bias. + +Acked-by: Chen-Yu Tsai +Signed-off-by: Maxime Ripard +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c +@@ -165,6 +165,8 @@ static int sunxi_pctrl_parse_bias_prop(s + return -EINVAL; + + switch (val) { ++ case SUN4I_PINCTRL_NO_PULL: ++ return PIN_CONFIG_BIAS_DISABLE; + case SUN4I_PINCTRL_PULL_UP: + return PIN_CONFIG_BIAS_PULL_UP; + case SUN4I_PINCTRL_PULL_DOWN: +@@ -401,6 +403,12 @@ static int sunxi_pconf_group_set(struct + | dlevel << sunxi_dlevel_offset(pin), + pctl->membase + sunxi_dlevel_reg(pin)); + break; ++ case PIN_CONFIG_BIAS_DISABLE: ++ val = readl(pctl->membase + sunxi_pull_reg(pin)); ++ mask = PULL_PINS_MASK << sunxi_pull_offset(pin); ++ writel((val & ~mask), ++ pctl->membase + sunxi_pull_reg(pin)); ++ break; + case PIN_CONFIG_BIAS_PULL_UP: + val = readl(pctl->membase + sunxi_pull_reg(pin)); + mask = PULL_PINS_MASK << sunxi_pull_offset(pin); diff --git a/target/linux/sunxi/patches-4.9/0033-pinctrl-sunxi-Support-generic-binding.patch b/target/linux/sunxi/patches-4.9/0033-pinctrl-sunxi-Support-generic-binding.patch new file mode 100644 index 0000000000..35c6876812 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0033-pinctrl-sunxi-Support-generic-binding.patch @@ -0,0 +1,106 @@ +From cefbf1a1b29531a970bc2908a50a75d6474fcc38 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Thu, 20 Oct 2016 15:49:03 +0200 +Subject: pinctrl: sunxi: Support generic binding + +Our bindings are mostly irrelevant now that we have generic pinctrl +bindings that cover exactly the same uses cases. + +Add support for the new ones, and obviously keep our old binding support in +order to keep the ABI stable. + +Acked-by: Chen-Yu Tsai +Signed-off-by: Maxime Ripard +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 48 +++++++++++++++++++++++++++++++++-- + 1 file changed, 46 insertions(+), 2 deletions(-) + +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c +@@ -149,18 +149,33 @@ static int sunxi_pctrl_get_group_pins(st + + static bool sunxi_pctrl_has_bias_prop(struct device_node *node) + { +- return of_find_property(node, "allwinner,pull", NULL); ++ return of_find_property(node, "bias-pull-up", NULL) || ++ of_find_property(node, "bias-pull-down", NULL) || ++ of_find_property(node, "bias-disable", NULL) || ++ of_find_property(node, "allwinner,pull", NULL); + } + + static bool sunxi_pctrl_has_drive_prop(struct device_node *node) + { +- return of_find_property(node, "allwinner,drive", NULL); ++ return of_find_property(node, "drive-strength", NULL) || ++ of_find_property(node, "allwinner,drive", NULL); + } + + static int sunxi_pctrl_parse_bias_prop(struct device_node *node) + { + u32 val; + ++ /* Try the new style binding */ ++ if (of_find_property(node, "bias-pull-up", NULL)) ++ return PIN_CONFIG_BIAS_PULL_UP; ++ ++ if (of_find_property(node, "bias-pull-down", NULL)) ++ return PIN_CONFIG_BIAS_PULL_DOWN; ++ ++ if (of_find_property(node, "bias-disable", NULL)) ++ return PIN_CONFIG_BIAS_DISABLE; ++ ++ /* And fall back to the old binding */ + if (of_property_read_u32(node, "allwinner,pull", &val)) + return -EINVAL; + +@@ -180,6 +195,21 @@ static int sunxi_pctrl_parse_drive_prop( + { + u32 val; + ++ /* Try the new style binding */ ++ if (!of_property_read_u32(node, "drive-strength", &val)) { ++ /* We can't go below 10mA ... */ ++ if (val < 10) ++ return -EINVAL; ++ ++ /* ... and only up to 40 mA ... */ ++ if (val > 40) ++ val = 40; ++ ++ /* by steps of 10 mA */ ++ return rounddown(val, 10); ++ } ++ ++ /* And then fall back to the old binding */ + if (of_property_read_u32(node, "allwinner,drive", &val)) + return -EINVAL; + +@@ -191,6 +221,12 @@ static const char *sunxi_pctrl_parse_fun + const char *function; + int ret; + ++ /* Try the generic binding */ ++ ret = of_property_read_string(node, "function", &function); ++ if (!ret) ++ return function; ++ ++ /* And fall back to our legacy one */ + ret = of_property_read_string(node, "allwinner,function", &function); + if (!ret) + return function; +@@ -203,6 +239,14 @@ static const char *sunxi_pctrl_find_pins + { + int count; + ++ /* Try the generic binding */ ++ count = of_property_count_strings(node, "pins"); ++ if (count > 0) { ++ *npins = count; ++ return "pins"; ++ } ++ ++ /* And fall back to our legacy one */ + count = of_property_count_strings(node, "allwinner,pins"); + if (count > 0) { + *npins = count; diff --git a/target/linux/sunxi/patches-4.9/0034-pinctrl-sunxi-Deal-with-configless-pins.patch b/target/linux/sunxi/patches-4.9/0034-pinctrl-sunxi-Deal-with-configless-pins.patch new file mode 100644 index 0000000000..119ab2b8f9 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0034-pinctrl-sunxi-Deal-with-configless-pins.patch @@ -0,0 +1,128 @@ +From e11dee2e98f8abc99ad5336796576a827853ccfa Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Thu, 20 Oct 2016 15:49:02 +0200 +Subject: pinctrl: sunxi: Deal with configless pins + +Even though the our binding had the assumption that the allwinner,pull and +allwinner,drive properties were optional, the code never took that into +account. + +Fix that. + +Signed-off-by: Maxime Ripard +Acked-by: Chen-Yu Tsai +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 51 +++++++++++++++++++++++++---------- + 1 file changed, 37 insertions(+), 14 deletions(-) + +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c +@@ -261,20 +261,29 @@ static unsigned long *sunxi_pctrl_build_ + { + unsigned long *pinconfig; + unsigned int configlen = 0, idx = 0; ++ int ret; + + if (sunxi_pctrl_has_drive_prop(node)) + configlen++; + if (sunxi_pctrl_has_bias_prop(node)) + configlen++; + ++ /* ++ * If we don't have any configuration, bail out ++ */ ++ if (!configlen) ++ return NULL; ++ + pinconfig = kzalloc(configlen * sizeof(*pinconfig), GFP_KERNEL); + if (!pinconfig) +- return NULL; ++ return ERR_PTR(-ENOMEM); + + if (sunxi_pctrl_has_drive_prop(node)) { + int drive = sunxi_pctrl_parse_drive_prop(node); +- if (drive < 0) ++ if (drive < 0) { ++ ret = drive; + goto err_free; ++ } + + pinconfig[idx++] = pinconf_to_config_packed(PIN_CONFIG_DRIVE_STRENGTH, + drive); +@@ -282,8 +291,10 @@ static unsigned long *sunxi_pctrl_build_ + + if (sunxi_pctrl_has_bias_prop(node)) { + int pull = sunxi_pctrl_parse_bias_prop(node); +- if (pull < 0) ++ if (pull < 0) { ++ ret = pull; + goto err_free; ++ } + + pinconfig[idx++] = pinconf_to_config_packed(pull, 0); + } +@@ -294,7 +305,7 @@ static unsigned long *sunxi_pctrl_build_ + + err_free: + kfree(pinconfig); +- return NULL; ++ return ERR_PTR(ret); + } + + static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev, +@@ -328,7 +339,10 @@ static int sunxi_pctrl_dt_node_to_map(st + + /* + * We have two maps for each pin: one for the function, one +- * for the configuration (bias, strength, etc) ++ * for the configuration (bias, strength, etc). ++ * ++ * We might be slightly overshooting, since we might not have ++ * any configuration. + */ + nmaps = npins * 2; + *map = kmalloc(nmaps * sizeof(struct pinctrl_map), GFP_KERNEL); +@@ -336,8 +350,8 @@ static int sunxi_pctrl_dt_node_to_map(st + return -ENOMEM; + + pinconfig = sunxi_pctrl_build_pin_config(node, &configlen); +- if (!pinconfig) { +- ret = -EINVAL; ++ if (IS_ERR(pinconfig)) { ++ ret = PTR_ERR(pinconfig); + goto err_free_map; + } + +@@ -364,15 +378,24 @@ static int sunxi_pctrl_dt_node_to_map(st + + i++; + +- (*map)[i].type = PIN_MAP_TYPE_CONFIGS_GROUP; +- (*map)[i].data.configs.group_or_pin = group; +- (*map)[i].data.configs.configs = pinconfig; +- (*map)[i].data.configs.num_configs = configlen; +- +- i++; ++ if (pinconfig) { ++ (*map)[i].type = PIN_MAP_TYPE_CONFIGS_GROUP; ++ (*map)[i].data.configs.group_or_pin = group; ++ (*map)[i].data.configs.configs = pinconfig; ++ (*map)[i].data.configs.num_configs = configlen; ++ i++; ++ } + } + +- *num_maps = nmaps; ++ *num_maps = i; ++ ++ /* ++ * We know have the number of maps we need, we can resize our ++ * map array ++ */ ++ *map = krealloc(*map, i * sizeof(struct pinctrl_map), GFP_KERNEL); ++ if (!map) ++ return -ENOMEM; + + return 0; + diff --git a/target/linux/sunxi/patches-4.9/0035-pinctrl-sunxi-make-bool-drivers-explicitly-non-modul.patch b/target/linux/sunxi/patches-4.9/0035-pinctrl-sunxi-make-bool-drivers-explicitly-non-modul.patch new file mode 100644 index 0000000000..8ab535c30f --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0035-pinctrl-sunxi-make-bool-drivers-explicitly-non-modul.patch @@ -0,0 +1,437 @@ +From 0c8c6ba00cbf2c0a6164aa41d43d017d65caf321 Mon Sep 17 00:00:00 2001 +From: Paul Gortmaker +Date: Sat, 29 Oct 2016 20:00:30 -0400 +Subject: pinctrl: sunxi: make bool drivers explicitly non-modular + +None of the Kconfigs for any of these drivers are tristate, +meaning that they currently are not being built as a module by anyone. + +Lets remove the modular code that is essentially orphaned, so that +when reading the drivers there is no doubt they are builtin-only. All +drivers get essentially the same change, so they are handled in batch. + +Changes are (1) use builtin_platform_driver, (2) use init.h header +(3) delete module_exit related code, (4) delete MODULE_DEVICE_TABLE, +and (5) delete MODULE_LICENCE/MODULE_AUTHOR and associated tags. + +Since module_platform_driver() uses the same init level priority as +builtin_platform_driver() the init ordering remains unchanged with +this commit. + +Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. + +We do delete the MODULE_LICENSE etc. tags since all that information +is already contained at the top of each file in the comments. + +Cc: Boris Brezillon +Cc: Chen-Yu Tsai +Cc: Hans de Goede +Cc: Linus Walleij +Cc: Patrice Chotard +Cc: Hongzhou Yang +Cc: Fabian Frederick +Cc: Maxime Coquelin +Cc: Vishnu Patekar +Cc: Mylene Josserand +Cc: linux-gpio@vger.kernel.org +Cc: linux-arm-kernel@lists.infradead.org +Signed-off-by: Paul Gortmaker +Acked-by: Maxime Ripard +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/sunxi/pinctrl-gr8.c | 9 ++------- + drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c | 9 ++------- + drivers/pinctrl/sunxi/pinctrl-sun5i-a10s.c | 9 ++------- + drivers/pinctrl/sunxi/pinctrl-sun5i-a13.c | 9 ++------- + drivers/pinctrl/sunxi/pinctrl-sun6i-a31-r.c | 10 ++-------- + drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c | 9 ++------- + drivers/pinctrl/sunxi/pinctrl-sun6i-a31s.c | 9 ++------- + drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c | 9 ++------- + drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c | 11 ++--------- + drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c | 10 ++-------- + drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c | 9 ++------- + drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c | 9 ++------- + drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c | 9 ++------- + 13 files changed, 26 insertions(+), 95 deletions(-) + +--- a/drivers/pinctrl/sunxi/pinctrl-gr8.c ++++ b/drivers/pinctrl/sunxi/pinctrl-gr8.c +@@ -12,7 +12,7 @@ + * warranty of any kind, whether express or implied. + */ + +-#include ++#include + #include + #include + #include +@@ -525,7 +525,6 @@ static const struct of_device_id sun5i_g + { .compatible = "nextthing,gr8-pinctrl", }, + {} + }; +-MODULE_DEVICE_TABLE(of, sun5i_gr8_pinctrl_match); + + static struct platform_driver sun5i_gr8_pinctrl_driver = { + .probe = sun5i_gr8_pinctrl_probe, +@@ -534,8 +533,4 @@ static struct platform_driver sun5i_gr8_ + .of_match_table = sun5i_gr8_pinctrl_match, + }, + }; +-module_platform_driver(sun5i_gr8_pinctrl_driver); +- +-MODULE_AUTHOR("Mylene Josserand ++#include + #include + #include + #include +@@ -1036,7 +1036,6 @@ static const struct of_device_id sun4i_a + { .compatible = "allwinner,sun4i-a10-pinctrl", }, + {} + }; +-MODULE_DEVICE_TABLE(of, sun4i_a10_pinctrl_match); + + static struct platform_driver sun4i_a10_pinctrl_driver = { + .probe = sun4i_a10_pinctrl_probe, +@@ -1045,8 +1044,4 @@ static struct platform_driver sun4i_a10_ + .of_match_table = sun4i_a10_pinctrl_match, + }, + }; +-module_platform_driver(sun4i_a10_pinctrl_driver); +- +-MODULE_AUTHOR("Maxime Ripard ++#include + #include + #include + #include +@@ -674,7 +674,6 @@ static const struct of_device_id sun5i_a + { .compatible = "allwinner,sun5i-a10s-pinctrl", }, + {} + }; +-MODULE_DEVICE_TABLE(of, sun5i_a10s_pinctrl_match); + + static struct platform_driver sun5i_a10s_pinctrl_driver = { + .probe = sun5i_a10s_pinctrl_probe, +@@ -683,8 +682,4 @@ static struct platform_driver sun5i_a10s + .of_match_table = sun5i_a10s_pinctrl_match, + }, + }; +-module_platform_driver(sun5i_a10s_pinctrl_driver); +- +-MODULE_AUTHOR("Maxime Ripard ++#include + #include + #include + #include +@@ -392,7 +392,6 @@ static const struct of_device_id sun5i_a + { .compatible = "allwinner,sun5i-a13-pinctrl", }, + {} + }; +-MODULE_DEVICE_TABLE(of, sun5i_a13_pinctrl_match); + + static struct platform_driver sun5i_a13_pinctrl_driver = { + .probe = sun5i_a13_pinctrl_probe, +@@ -401,8 +400,4 @@ static struct platform_driver sun5i_a13_ + .of_match_table = sun5i_a13_pinctrl_match, + }, + }; +-module_platform_driver(sun5i_a13_pinctrl_driver); +- +-MODULE_AUTHOR("Maxime Ripard ++#include + #include + #include + #include +@@ -136,7 +136,6 @@ static const struct of_device_id sun6i_a + { .compatible = "allwinner,sun6i-a31-r-pinctrl", }, + {} + }; +-MODULE_DEVICE_TABLE(of, sun6i_a31_r_pinctrl_match); + + static struct platform_driver sun6i_a31_r_pinctrl_driver = { + .probe = sun6i_a31_r_pinctrl_probe, +@@ -145,9 +144,4 @@ static struct platform_driver sun6i_a31_ + .of_match_table = sun6i_a31_r_pinctrl_match, + }, + }; +-module_platform_driver(sun6i_a31_r_pinctrl_driver); +- +-MODULE_AUTHOR("Boris Brezillon ++#include + #include + #include + #include +@@ -934,7 +934,6 @@ static const struct of_device_id sun6i_a + { .compatible = "allwinner,sun6i-a31-pinctrl", }, + {} + }; +-MODULE_DEVICE_TABLE(of, sun6i_a31_pinctrl_match); + + static struct platform_driver sun6i_a31_pinctrl_driver = { + .probe = sun6i_a31_pinctrl_probe, +@@ -943,8 +942,4 @@ static struct platform_driver sun6i_a31_ + .of_match_table = sun6i_a31_pinctrl_match, + }, + }; +-module_platform_driver(sun6i_a31_pinctrl_driver); +- +-MODULE_AUTHOR("Maxime Ripard ++#include + #include + #include + #include +@@ -798,7 +798,6 @@ static const struct of_device_id sun6i_a + { .compatible = "allwinner,sun6i-a31s-pinctrl", }, + {} + }; +-MODULE_DEVICE_TABLE(of, sun6i_a31s_pinctrl_match); + + static struct platform_driver sun6i_a31s_pinctrl_driver = { + .probe = sun6i_a31s_pinctrl_probe, +@@ -807,8 +806,4 @@ static struct platform_driver sun6i_a31s + .of_match_table = sun6i_a31s_pinctrl_match, + }, + }; +-module_platform_driver(sun6i_a31s_pinctrl_driver); +- +-MODULE_AUTHOR("Hans de Goede "); +-MODULE_DESCRIPTION("Allwinner A31s pinctrl driver"); +-MODULE_LICENSE("GPL"); ++builtin_platform_driver(sun6i_a31s_pinctrl_driver); +--- a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c +@@ -10,7 +10,7 @@ + * warranty of any kind, whether express or implied. + */ + +-#include ++#include + #include + #include + #include +@@ -1045,7 +1045,6 @@ static const struct of_device_id sun7i_a + { .compatible = "allwinner,sun7i-a20-pinctrl", }, + {} + }; +-MODULE_DEVICE_TABLE(of, sun7i_a20_pinctrl_match); + + static struct platform_driver sun7i_a20_pinctrl_driver = { + .probe = sun7i_a20_pinctrl_probe, +@@ -1054,8 +1053,4 @@ static struct platform_driver sun7i_a20_ + .of_match_table = sun7i_a20_pinctrl_match, + }, + }; +-module_platform_driver(sun7i_a20_pinctrl_driver); +- +-MODULE_AUTHOR("Maxime Ripard ++#include + #include + #include + #include +@@ -123,7 +123,6 @@ static const struct of_device_id sun8i_a + { .compatible = "allwinner,sun8i-a23-r-pinctrl", }, + {} + }; +-MODULE_DEVICE_TABLE(of, sun8i_a23_r_pinctrl_match); + + static struct platform_driver sun8i_a23_r_pinctrl_driver = { + .probe = sun8i_a23_r_pinctrl_probe, +@@ -132,10 +131,4 @@ static struct platform_driver sun8i_a23_ + .of_match_table = sun8i_a23_r_pinctrl_match, + }, + }; +-module_platform_driver(sun8i_a23_r_pinctrl_driver); +- +-MODULE_AUTHOR("Chen-Yu Tsai "); +-MODULE_AUTHOR("Boris Brezillon ++#include + #include + #include + #include +@@ -575,7 +575,6 @@ static const struct of_device_id sun8i_a + { .compatible = "allwinner,sun8i-a23-pinctrl", }, + {} + }; +-MODULE_DEVICE_TABLE(of, sun8i_a23_pinctrl_match); + + static struct platform_driver sun8i_a23_pinctrl_driver = { + .probe = sun8i_a23_pinctrl_probe, +@@ -584,9 +583,4 @@ static struct platform_driver sun8i_a23_ + .of_match_table = sun8i_a23_pinctrl_match, + }, + }; +-module_platform_driver(sun8i_a23_pinctrl_driver); +- +-MODULE_AUTHOR("Chen-Yu Tsai "); +-MODULE_AUTHOR("Maxime Ripard ++#include + #include + #include + #include +@@ -498,7 +498,6 @@ static const struct of_device_id sun8i_a + { .compatible = "allwinner,sun8i-a33-pinctrl", }, + {} + }; +-MODULE_DEVICE_TABLE(of, sun8i_a33_pinctrl_match); + + static struct platform_driver sun8i_a33_pinctrl_driver = { + .probe = sun8i_a33_pinctrl_probe, +@@ -507,8 +506,4 @@ static struct platform_driver sun8i_a33_ + .of_match_table = sun8i_a33_pinctrl_match, + }, + }; +-module_platform_driver(sun8i_a33_pinctrl_driver); +- +-MODULE_AUTHOR("Vishnu Patekar "); +-MODULE_DESCRIPTION("Allwinner a33 pinctrl driver"); +-MODULE_LICENSE("GPL"); ++builtin_platform_driver(sun8i_a33_pinctrl_driver); +--- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c +@@ -12,7 +12,7 @@ + * warranty of any kind, whether express or implied. + */ + +-#include ++#include + #include + #include + #include +@@ -587,7 +587,6 @@ static const struct of_device_id sun8i_a + { .compatible = "allwinner,sun8i-a83t-pinctrl", }, + {} + }; +-MODULE_DEVICE_TABLE(of, sun8i_a83t_pinctrl_match); + + static struct platform_driver sun8i_a83t_pinctrl_driver = { + .probe = sun8i_a83t_pinctrl_probe, +@@ -596,8 +595,4 @@ static struct platform_driver sun8i_a83t + .of_match_table = sun8i_a83t_pinctrl_match, + }, + }; +-module_platform_driver(sun8i_a83t_pinctrl_driver); +- +-MODULE_AUTHOR("Vishnu Patekar "); +-MODULE_DESCRIPTION("Allwinner a83t pinctrl driver"); +-MODULE_LICENSE("GPL"); ++builtin_platform_driver(sun8i_a83t_pinctrl_driver); +--- a/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c +@@ -10,7 +10,7 @@ + * warranty of any kind, whether express or implied. + */ + +-#include ++#include + #include + #include + #include +@@ -733,7 +733,6 @@ static const struct of_device_id sun9i_a + { .compatible = "allwinner,sun9i-a80-pinctrl", }, + {} + }; +-MODULE_DEVICE_TABLE(of, sun9i_a80_pinctrl_match); + + static struct platform_driver sun9i_a80_pinctrl_driver = { + .probe = sun9i_a80_pinctrl_probe, +@@ -742,8 +741,4 @@ static struct platform_driver sun9i_a80_ + .of_match_table = sun9i_a80_pinctrl_match, + }, + }; +-module_platform_driver(sun9i_a80_pinctrl_driver); +- +-MODULE_AUTHOR("Maxime Ripard "); +-MODULE_DESCRIPTION("Allwinner A80 pinctrl driver"); +-MODULE_LICENSE("GPL"); ++builtin_platform_driver(sun9i_a80_pinctrl_driver); diff --git a/target/linux/sunxi/patches-4.9/0036-pinctrl-sunxi-Free-configs-in-pinctrl_map-only-if-it.patch b/target/linux/sunxi/patches-4.9/0036-pinctrl-sunxi-Free-configs-in-pinctrl_map-only-if-it.patch new file mode 100644 index 0000000000..02c5f568c8 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0036-pinctrl-sunxi-Free-configs-in-pinctrl_map-only-if-it.patch @@ -0,0 +1,51 @@ +From 88f01a1bd0e0dbd01b65907023dbe53cf524ea2a Mon Sep 17 00:00:00 2001 +From: Chen-Yu Tsai +Date: Fri, 11 Nov 2016 10:35:10 +0800 +Subject: pinctrl: sunxi: Free configs in pinctrl_map only if it is a config + map + +In the recently refactored sunxi pinctrl library, we are only allocating +one set of pin configs for each pinmux setting node. When the pinctrl_map +structure is freed, the pin configs should also be freed. However the +code assumed the first map would contain the configs, which actually +never happens, as the mux function map gets added first. + +The proper way to do this is to look through all the maps and free the +first one whose type is actually PIN_MAP_TYPE_CONFIGS_GROUP. + +Also slightly expand the comment explaining this. + +Fixes: f233dbca6227 ("pinctrl: sunxi: Rework the pin config building code") +Signed-off-by: Chen-Yu Tsai +Acked-by: Maxime Ripard +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 17 +++++++++++++++-- + 1 file changed, 15 insertions(+), 2 deletions(-) + +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c +@@ -408,8 +408,21 @@ static void sunxi_pctrl_dt_free_map(stru + struct pinctrl_map *map, + unsigned num_maps) + { +- /* All the maps have the same pin config, free only the first one */ +- kfree(map[0].data.configs.configs); ++ int i; ++ ++ /* pin config is never in the first map */ ++ for (i = 1; i < num_maps; i++) { ++ if (map[i].type != PIN_MAP_TYPE_CONFIGS_GROUP) ++ continue; ++ ++ /* ++ * All the maps share the same pin config, ++ * free only the first one we find. ++ */ ++ kfree(map[i].data.configs.configs); ++ break; ++ } ++ + kfree(map); + } + diff --git a/target/linux/sunxi/patches-4.9/0037-pinctrl-sunxi-Fix-PIN_CONFIG_BIAS_PULL_-DOWN-UP-argu.patch b/target/linux/sunxi/patches-4.9/0037-pinctrl-sunxi-Fix-PIN_CONFIG_BIAS_PULL_-DOWN-UP-argu.patch new file mode 100644 index 0000000000..4921240f79 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0037-pinctrl-sunxi-Fix-PIN_CONFIG_BIAS_PULL_-DOWN-UP-argu.patch @@ -0,0 +1,40 @@ +From 223dba00b4072efc590c7d648f230db1b44186b9 Mon Sep 17 00:00:00 2001 +From: Chen-Yu Tsai +Date: Fri, 11 Nov 2016 17:50:34 +0800 +Subject: pinctrl: sunxi: Fix PIN_CONFIG_BIAS_PULL_{DOWN,UP} argument + +According to pinconf-generic.h, the argument for +PIN_CONFIG_BIAS_PULL_{DOWN,UP} is non-zero if the bias is enabled +with a pull up/down resistor, zero if it is directly connected +to VDD or ground. + +Since Allwinner hardware uses a weak pull resistor internally, +the argument should be 1. + +Signed-off-by: Chen-Yu Tsai +Acked-by: Maxime Ripard +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c +@@ -291,12 +291,16 @@ static unsigned long *sunxi_pctrl_build_ + + if (sunxi_pctrl_has_bias_prop(node)) { + int pull = sunxi_pctrl_parse_bias_prop(node); ++ int arg = 0; + if (pull < 0) { + ret = pull; + goto err_free; + } + +- pinconfig[idx++] = pinconf_to_config_packed(pull, 0); ++ if (pull != PIN_CONFIG_BIAS_DISABLE) ++ arg = 1; /* hardware uses weak pull resistors */ ++ ++ pinconfig[idx++] = pinconf_to_config_packed(pull, arg); + } + + diff --git a/target/linux/sunxi/patches-4.9/0038-pinctrl-sunxi-Add-support-for-fetching-pinconf-setti.patch b/target/linux/sunxi/patches-4.9/0038-pinctrl-sunxi-Add-support-for-fetching-pinconf-setti.patch new file mode 100644 index 0000000000..d7972197ff --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0038-pinctrl-sunxi-Add-support-for-fetching-pinconf-setti.patch @@ -0,0 +1,158 @@ +From c5fda170e87a4bdaeb278f7e50f7a1f654e94eb5 Mon Sep 17 00:00:00 2001 +From: Chen-Yu Tsai +Date: Fri, 11 Nov 2016 17:50:35 +0800 +Subject: pinctrl: sunxi: Add support for fetching pinconf settings from + hardware + +The sunxi pinctrl driver only caches whatever pinconf setting was last +set on a given pingroup. This is not particularly helpful, nor is it +correct. + +Fix this by actually reading the hardware registers and returning +the correct results or error codes. Also filter out unsupported +pinconf settings. Since this driver has a peculiar setup of 1 pin +per group, we can support both pin and pingroup pinconf setting +read back with the same code. The sunxi_pconf_reg helper and code +structure is inspired by pinctrl-msm. + +With this done we can also claim to support generic pinconf, by +setting .is_generic = true in pinconf_ops. + +Also remove the cached config value. The behavior of this was never +correct, as it only cached 1 setting instead of all of them. Since +we can now read back settings directly from the hardware, it is no +longer required. + +Signed-off-by: Chen-Yu Tsai +Acked-by: Maxime Ripard +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 86 +++++++++++++++++++++++++++++++++-- + drivers/pinctrl/sunxi/pinctrl-sunxi.h | 1 - + 2 files changed, 81 insertions(+), 6 deletions(-) + +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c +@@ -438,15 +438,91 @@ static const struct pinctrl_ops sunxi_pc + .get_group_pins = sunxi_pctrl_get_group_pins, + }; + ++static int sunxi_pconf_reg(unsigned pin, enum pin_config_param param, ++ u32 *offset, u32 *shift, u32 *mask) ++{ ++ switch (param) { ++ case PIN_CONFIG_DRIVE_STRENGTH: ++ *offset = sunxi_dlevel_reg(pin); ++ *shift = sunxi_dlevel_offset(pin); ++ *mask = DLEVEL_PINS_MASK; ++ break; ++ ++ case PIN_CONFIG_BIAS_PULL_UP: ++ case PIN_CONFIG_BIAS_PULL_DOWN: ++ case PIN_CONFIG_BIAS_DISABLE: ++ *offset = sunxi_pull_reg(pin); ++ *shift = sunxi_pull_offset(pin); ++ *mask = PULL_PINS_MASK; ++ break; ++ ++ default: ++ return -ENOTSUPP; ++ } ++ ++ return 0; ++} ++ ++static int sunxi_pconf_get(struct pinctrl_dev *pctldev, unsigned pin, ++ unsigned long *config) ++{ ++ struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); ++ enum pin_config_param param = pinconf_to_config_param(*config); ++ u32 offset, shift, mask, val; ++ u16 arg; ++ int ret; ++ ++ pin -= pctl->desc->pin_base; ++ ++ ret = sunxi_pconf_reg(pin, param, &offset, &shift, &mask); ++ if (ret < 0) ++ return ret; ++ ++ val = (readl(pctl->membase + offset) >> shift) & mask; ++ ++ switch (pinconf_to_config_param(*config)) { ++ case PIN_CONFIG_DRIVE_STRENGTH: ++ arg = (val + 1) * 10; ++ break; ++ ++ case PIN_CONFIG_BIAS_PULL_UP: ++ if (val != SUN4I_PINCTRL_PULL_UP) ++ return -EINVAL; ++ arg = 1; /* hardware is weak pull-up */ ++ break; ++ ++ case PIN_CONFIG_BIAS_PULL_DOWN: ++ if (val != SUN4I_PINCTRL_PULL_DOWN) ++ return -EINVAL; ++ arg = 1; /* hardware is weak pull-down */ ++ break; ++ ++ case PIN_CONFIG_BIAS_DISABLE: ++ if (val != SUN4I_PINCTRL_NO_PULL) ++ return -EINVAL; ++ arg = 0; ++ break; ++ ++ default: ++ /* sunxi_pconf_reg should catch anything unsupported */ ++ WARN_ON(1); ++ return -ENOTSUPP; ++ } ++ ++ *config = pinconf_to_config_packed(param, arg); ++ ++ return 0; ++} ++ + static int sunxi_pconf_group_get(struct pinctrl_dev *pctldev, + unsigned group, + unsigned long *config) + { + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); ++ struct sunxi_pinctrl_group *g = &pctl->groups[group]; + +- *config = pctl->groups[group].config; +- +- return 0; ++ /* We only support 1 pin per group. Chain it to the pin callback */ ++ return sunxi_pconf_get(pctldev, g->pin, config); + } + + static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev, +@@ -508,8 +584,6 @@ static int sunxi_pconf_group_set(struct + default: + break; + } +- /* cache the config value */ +- g->config = configs[i]; + } /* for each config */ + + spin_unlock_irqrestore(&pctl->lock, flags); +@@ -518,6 +592,8 @@ static int sunxi_pconf_group_set(struct + } + + static const struct pinconf_ops sunxi_pconf_ops = { ++ .is_generic = true, ++ .pin_config_get = sunxi_pconf_get, + .pin_config_group_get = sunxi_pconf_group_get, + .pin_config_group_set = sunxi_pconf_group_set, + }; +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h +@@ -109,7 +109,6 @@ struct sunxi_pinctrl_function { + + struct sunxi_pinctrl_group { + const char *name; +- unsigned long config; + unsigned pin; + }; + diff --git a/target/linux/sunxi/patches-4.9/0039-pinctrl-sunxi-Make-sunxi_pconf_group_set-use-sunxi_p.patch b/target/linux/sunxi/patches-4.9/0039-pinctrl-sunxi-Make-sunxi_pconf_group_set-use-sunxi_p.patch new file mode 100644 index 0000000000..7555933f63 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0039-pinctrl-sunxi-Make-sunxi_pconf_group_set-use-sunxi_p.patch @@ -0,0 +1,122 @@ +From 51814827190214986c452a166718bf12d32211c7 Mon Sep 17 00:00:00 2001 +From: Chen-Yu Tsai +Date: Fri, 11 Nov 2016 17:50:36 +0800 +Subject: pinctrl: sunxi: Make sunxi_pconf_group_set use sunxi_pconf_reg helper + +The sunxi_pconf_reg helper introduced in the last patch gives us the +chance to rework sunxi_pconf_group_set to have it match the structure +of sunxi_pconf_(group_)get and make it easier to understand. + +For each config to set, it: + + 1. checks if the parameter is supported. + 2. checks if the argument is within limits. + 3. converts argument to the register value. + 4. writes to the register with spinlock held. + +As a result the function now blocks unsupported config parameters, +instead of silently ignoring them. + +Signed-off-by: Chen-Yu Tsai +Acked-by: Maxime Ripard +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 64 +++++++++++++++++------------------ + 1 file changed, 32 insertions(+), 32 deletions(-) + +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c +@@ -532,23 +532,27 @@ static int sunxi_pconf_group_set(struct + { + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + struct sunxi_pinctrl_group *g = &pctl->groups[group]; +- unsigned long flags; + unsigned pin = g->pin - pctl->desc->pin_base; +- u32 val, mask; +- u16 strength; +- u8 dlevel; + int i; + +- spin_lock_irqsave(&pctl->lock, flags); +- + for (i = 0; i < num_configs; i++) { +- switch (pinconf_to_config_param(configs[i])) { ++ enum pin_config_param param; ++ unsigned long flags; ++ u32 offset, shift, mask, reg; ++ u16 arg, val; ++ int ret; ++ ++ param = pinconf_to_config_param(configs[i]); ++ arg = pinconf_to_config_argument(configs[i]); ++ ++ ret = sunxi_pconf_reg(pin, param, &offset, &shift, &mask); ++ if (ret < 0) ++ return ret; ++ ++ switch (param) { + case PIN_CONFIG_DRIVE_STRENGTH: +- strength = pinconf_to_config_argument(configs[i]); +- if (strength > 40) { +- spin_unlock_irqrestore(&pctl->lock, flags); ++ if (arg < 10 || arg > 40) + return -EINVAL; +- } + /* + * We convert from mA to what the register expects: + * 0: 10mA +@@ -556,37 +560,33 @@ static int sunxi_pconf_group_set(struct + * 2: 30mA + * 3: 40mA + */ +- dlevel = strength / 10 - 1; +- val = readl(pctl->membase + sunxi_dlevel_reg(pin)); +- mask = DLEVEL_PINS_MASK << sunxi_dlevel_offset(pin); +- writel((val & ~mask) +- | dlevel << sunxi_dlevel_offset(pin), +- pctl->membase + sunxi_dlevel_reg(pin)); ++ val = arg / 10 - 1; + break; + case PIN_CONFIG_BIAS_DISABLE: +- val = readl(pctl->membase + sunxi_pull_reg(pin)); +- mask = PULL_PINS_MASK << sunxi_pull_offset(pin); +- writel((val & ~mask), +- pctl->membase + sunxi_pull_reg(pin)); ++ val = 0; + break; + case PIN_CONFIG_BIAS_PULL_UP: +- val = readl(pctl->membase + sunxi_pull_reg(pin)); +- mask = PULL_PINS_MASK << sunxi_pull_offset(pin); +- writel((val & ~mask) | 1 << sunxi_pull_offset(pin), +- pctl->membase + sunxi_pull_reg(pin)); ++ if (arg == 0) ++ return -EINVAL; ++ val = 1; + break; + case PIN_CONFIG_BIAS_PULL_DOWN: +- val = readl(pctl->membase + sunxi_pull_reg(pin)); +- mask = PULL_PINS_MASK << sunxi_pull_offset(pin); +- writel((val & ~mask) | 2 << sunxi_pull_offset(pin), +- pctl->membase + sunxi_pull_reg(pin)); ++ if (arg == 0) ++ return -EINVAL; ++ val = 2; + break; + default: +- break; ++ /* sunxi_pconf_reg should catch anything unsupported */ ++ WARN_ON(1); ++ return -ENOTSUPP; + } +- } /* for each config */ + +- spin_unlock_irqrestore(&pctl->lock, flags); ++ spin_lock_irqsave(&pctl->lock, flags); ++ reg = readl(pctl->membase + offset); ++ reg &= ~(mask << shift); ++ writel(reg | val << shift, pctl->membase + offset); ++ spin_unlock_irqrestore(&pctl->lock, flags); ++ } /* for each config */ + + return 0; + } diff --git a/target/linux/sunxi/patches-4.9/0040-pinctrl-sunxi-Add-support-for-interrupt-debouncing.patch b/target/linux/sunxi/patches-4.9/0040-pinctrl-sunxi-Add-support-for-interrupt-debouncing.patch new file mode 100644 index 0000000000..01cbe31bef --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0040-pinctrl-sunxi-Add-support-for-interrupt-debouncing.patch @@ -0,0 +1,171 @@ +From 7c926492d38a3feef4b4b29c91b7c03eb1b8b546 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Mon, 14 Nov 2016 21:53:03 +0100 +Subject: pinctrl: sunxi: Add support for interrupt debouncing + +The pin controller found in the Allwinner SoCs has support for interrupts +debouncing. + +However, this is not done per-pin, preventing us from using the generic +pinconf binding for that, but per irq bank, which, depending on the SoC, +ranges from one to five. + +Introduce a device-wide property to deal with this using a microsecond +resolution. We can re-use the per-pin input-debounce property for that, so +let's do it! + +Signed-off-by: Maxime Ripard +Acked-by: Rob Herring +Signed-off-by: Linus Walleij +--- + .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 14 ++++ + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 84 ++++++++++++++++++++++ + drivers/pinctrl/sunxi/pinctrl-sunxi.h | 7 ++ + 3 files changed, 105 insertions(+) + +--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt ++++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +@@ -28,6 +28,20 @@ Required properties: + - reg: Should contain the register physical address and length for the + pin controller. + ++- clocks: phandle to the clocks feeding the pin controller: ++ - "apb": the gated APB parent clock ++ - "hosc": the high frequency oscillator in the system ++ - "losc": the low frequency oscillator in the system ++ ++Note: For backward compatibility reasons, the hosc and losc clocks are only ++required if you need to use the optional input-debounce property. Any new ++device tree should set them. ++ ++Optional properties: ++ - input-debounce: Array of debouncing periods in microseconds. One period per ++ irq bank found in the controller. 0 if no setup required. ++ ++ + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices. + +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c +@@ -1122,6 +1122,88 @@ static int sunxi_pinctrl_build_state(str + return 0; + } + ++static int sunxi_pinctrl_get_debounce_div(struct clk *clk, int freq, int *diff) ++{ ++ unsigned long clock = clk_get_rate(clk); ++ unsigned int best_diff = ~0, best_div; ++ int i; ++ ++ for (i = 0; i < 8; i++) { ++ int cur_diff = abs(freq - (clock >> i)); ++ ++ if (cur_diff < best_diff) { ++ best_diff = cur_diff; ++ best_div = i; ++ } ++ } ++ ++ *diff = best_diff; ++ return best_div; ++} ++ ++static int sunxi_pinctrl_setup_debounce(struct sunxi_pinctrl *pctl, ++ struct device_node *node) ++{ ++ unsigned int hosc_diff, losc_diff; ++ unsigned int hosc_div, losc_div; ++ struct clk *hosc, *losc; ++ u8 div, src; ++ int i, ret; ++ ++ /* Deal with old DTs that didn't have the oscillators */ ++ if (of_count_phandle_with_args(node, "clocks", "#clock-cells") != 3) ++ return 0; ++ ++ /* If we don't have any setup, bail out */ ++ if (!of_find_property(node, "input-debounce", NULL)) ++ return 0; ++ ++ losc = devm_clk_get(pctl->dev, "losc"); ++ if (IS_ERR(losc)) ++ return PTR_ERR(losc); ++ ++ hosc = devm_clk_get(pctl->dev, "hosc"); ++ if (IS_ERR(hosc)) ++ return PTR_ERR(hosc); ++ ++ for (i = 0; i < pctl->desc->irq_banks; i++) { ++ unsigned long debounce_freq; ++ u32 debounce; ++ ++ ret = of_property_read_u32_index(node, "input-debounce", ++ i, &debounce); ++ if (ret) ++ return ret; ++ ++ if (!debounce) ++ continue; ++ ++ debounce_freq = DIV_ROUND_CLOSEST(USEC_PER_SEC, debounce); ++ losc_div = sunxi_pinctrl_get_debounce_div(losc, ++ debounce_freq, ++ &losc_diff); ++ ++ hosc_div = sunxi_pinctrl_get_debounce_div(hosc, ++ debounce_freq, ++ &hosc_diff); ++ ++ if (hosc_diff < losc_diff) { ++ div = hosc_div; ++ src = 1; ++ } else { ++ div = losc_div; ++ src = 0; ++ } ++ ++ writel(src | div << 4, ++ pctl->membase + ++ sunxi_irq_debounce_reg_from_bank(i, ++ pctl->desc->irq_bank_base)); ++ } ++ ++ return 0; ++} ++ + int sunxi_pinctrl_init(struct platform_device *pdev, + const struct sunxi_pinctrl_desc *desc) + { +@@ -1284,6 +1366,8 @@ int sunxi_pinctrl_init(struct platform_d + pctl); + } + ++ sunxi_pinctrl_setup_debounce(pctl, node); ++ + dev_info(&pdev->dev, "initialized sunXi PIO driver\n"); + + return 0; +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h +@@ -69,6 +69,8 @@ + #define IRQ_STATUS_IRQ_BITS 1 + #define IRQ_STATUS_IRQ_MASK ((1 << IRQ_STATUS_IRQ_BITS) - 1) + ++#define IRQ_DEBOUNCE_REG 0x218 ++ + #define IRQ_MEM_SIZE 0x20 + + #define IRQ_EDGE_RISING 0x00 +@@ -265,6 +267,11 @@ static inline u32 sunxi_irq_ctrl_offset( + return irq_num * IRQ_CTRL_IRQ_BITS; + } + ++static inline u32 sunxi_irq_debounce_reg_from_bank(u8 bank, unsigned bank_base) ++{ ++ return IRQ_DEBOUNCE_REG + (bank_base + bank) * IRQ_MEM_SIZE; ++} ++ + static inline u32 sunxi_irq_status_reg_from_bank(u8 bank, unsigned bank_base) + { + return IRQ_STATUS_REG + (bank_base + bank) * IRQ_MEM_SIZE; diff --git a/target/linux/sunxi/patches-4.9/0041-pinctrl-sunxi-fix-theoretical-uninitialized-variable.patch b/target/linux/sunxi/patches-4.9/0041-pinctrl-sunxi-fix-theoretical-uninitialized-variable.patch new file mode 100644 index 0000000000..69de015b67 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0041-pinctrl-sunxi-fix-theoretical-uninitialized-variable.patch @@ -0,0 +1,40 @@ +From d8a22212737314cc02692cc90eda7d844fa20257 Mon Sep 17 00:00:00 2001 +From: Arnd Bergmann +Date: Wed, 16 Nov 2016 15:18:18 +0100 +Subject: pinctrl: sunxi: fix theoretical uninitialized variable access + +gcc warns about a way that it could use an uninitialized variable: + +drivers/pinctrl/sunxi/pinctrl-sunxi.c: In function 'sunxi_pinctrl_init': +drivers/pinctrl/sunxi/pinctrl-sunxi.c:1191:8: error: 'best_div' may be used uninitialized in this function [-Werror=maybe-uninitialized] + +This cannot really happen except if 'freq' is UINT_MAX and 'clock' is +zero, and both of these are forbidden. To shut up the warning anyway, +this changes the logic to initialize the return code to the first +divider value before looking at the others. + +Fixes: 7c926492d38a ("pinctrl: sunxi: Add support for interrupt debouncing") +Signed-off-by: Arnd Bergmann +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 7 +++++-- + 1 file changed, 5 insertions(+), 2 deletions(-) + +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c +@@ -1125,10 +1125,13 @@ static int sunxi_pinctrl_build_state(str + static int sunxi_pinctrl_get_debounce_div(struct clk *clk, int freq, int *diff) + { + unsigned long clock = clk_get_rate(clk); +- unsigned int best_diff = ~0, best_div; ++ unsigned int best_diff, best_div; + int i; + +- for (i = 0; i < 8; i++) { ++ best_diff = abs(freq - clock); ++ best_div = 0; ++ ++ for (i = 1; i < 8; i++) { + int cur_diff = abs(freq - (clock >> i)); + + if (cur_diff < best_diff) { diff --git a/target/linux/sunxi/patches-4.9/0042-pinctrl-sunxi-Testing-the-wrong-variable.patch b/target/linux/sunxi/patches-4.9/0042-pinctrl-sunxi-Testing-the-wrong-variable.patch new file mode 100644 index 0000000000..8ed4f27b4c --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0042-pinctrl-sunxi-Testing-the-wrong-variable.patch @@ -0,0 +1,35 @@ +From b3cde198b17f504643cc1eeffc4623f03326f436 Mon Sep 17 00:00:00 2001 +From: Dan Carpenter +Date: Fri, 18 Nov 2016 14:35:57 +0300 +Subject: pinctrl: sunxi: Testing the wrong variable + +Smatch complains that we dereference "map" before testing it for NULL +which is true. We should be testing "*map" instead. Also on the error +path, we should free *map and set it to NULL. + +Signed-off-by: Dan Carpenter +Acked-by: Maxime Ripard +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c +@@ -398,13 +398,14 @@ static int sunxi_pctrl_dt_node_to_map(st + * map array + */ + *map = krealloc(*map, i * sizeof(struct pinctrl_map), GFP_KERNEL); +- if (!map) ++ if (!*map) + return -ENOMEM; + + return 0; + + err_free_map: +- kfree(map); ++ kfree(*map); ++ *map = NULL; + return ret; + } + diff --git a/target/linux/sunxi/patches-4.9/0043-pinctrl-sunxi-Don-t-enforce-bias-disable-for-now.patch b/target/linux/sunxi/patches-4.9/0043-pinctrl-sunxi-Don-t-enforce-bias-disable-for-now.patch new file mode 100644 index 0000000000..d6e639af52 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/0043-pinctrl-sunxi-Don-t-enforce-bias-disable-for-now.patch @@ -0,0 +1,42 @@ +From 2154d94b40ea2a5de05245521371d0461bb0d669 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Mon, 23 Jan 2017 09:21:30 +0100 +Subject: pinctrl: sunxi: Don't enforce bias disable (for now) + +Commit 07fe64ba213f ("pinctrl: sunxi: Handle bias disable") actually +enforced enforced the disabling of the pull up/down resistors instead of +ignoring it like it was done before. + +This was part of a wider rework to switch to the generic pinconf bindings, +and was meant to be merged together with DT patches that were switching to +it, and removing what was considered default values by both the binding and +the boards. This included no bias on a pin. + +However, those DT patches were delayed to 4.11, which would be fine only +for a significant number boards having the bias setup wrong, which in turns +break the MMC on those boards (and possibly other devices too). + +In order to avoid conflicts as much as possible, bring back the old +behaviour for 4.10, and we'll revert that commit once all the DT bits will +have landed. + +Tested-by: Priit Laes +Signed-off-by: Maxime Ripard +Acked-by: Chen-Yu Tsai +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/sunxi/pinctrl-sunxi.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c ++++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c +@@ -564,8 +564,7 @@ static int sunxi_pconf_group_set(struct + val = arg / 10 - 1; + break; + case PIN_CONFIG_BIAS_DISABLE: +- val = 0; +- break; ++ continue; + case PIN_CONFIG_BIAS_PULL_UP: + if (arg == 0) + return -EINVAL;