From: Rosen Penev Date: Mon, 6 Jan 2020 02:27:06 +0000 (-0800) Subject: scripts/flashing/flash.sh: Add missing quotes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=34a2780395bef13be548c04b03b132a40bf32adf;p=openwrt%2Fstaging%2Fluka.git scripts/flashing/flash.sh: Add missing quotes These are in if statements (where they should be), and echo output that is not piped to anything. These should be safe. Found with shellcheck. Signed-off-by: Rosen Penev --- diff --git a/scripts/flashing/flash.sh b/scripts/flashing/flash.sh index 3499581ef4..7f2cdf5db9 100755 --- a/scripts/flashing/flash.sh +++ b/scripts/flashing/flash.sh @@ -20,8 +20,8 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then - echo Usage: $0 firmware vendor +if [ -z "$1" ] || [ ! -f "$1" ] || [ -z "$2" ]; then + echo Usage: "$0" firmware vendor cat << EOF IMPORTANT: Notes for Linksys / Asus WL500gx router: @@ -52,15 +52,15 @@ fi if [ "$2" = "asus" ]; then echo Confirming IP address setting... echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1 -echo Flashing 192.168.1.1 using $1... +echo Flashing 192.168.1.1 using "$1"... echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1 echo Please wait until leds stops flashing. elif [ "$2" = "linksys" ]; then -echo Flashing 192.168.1.1 using $1... +echo Flashing 192.168.1.1 using "$1"... echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1 echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1. elif [ "$2" = "toshiba" ]; then -echo Flashing 192.168.10.1 using $1... +echo Flashing 192.168.10.1 using "$1"... echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.10.1 echo Unit will automatically reboot within 5 minutes. Do not power off. Then you can login via telnet 192.168.10.1. fi