From: Mike Dunn Date: Tue, 18 Jun 2013 18:08:51 +0000 (-0700) Subject: pxa: palmtreo680 flash programming utility X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3497d43215b6919e680fefe59b38b71516adf2a0;p=project%2Fbcm63xx%2Fu-boot.git pxa: palmtreo680 flash programming utility This adds a userspace linux utility that writes the u-boot image to an mtd partition on the docg4 nand flash. A special utility is required to do this because u-boot is partially loaded by an initial program loader (IPL) that is permanently programmed to the boot region of the flash. This IPL expects the image to be written in a unique format. The characteristics of this format can be summarized as follows: - Flash blocks to be loaded must have a magic number in the oob bytes of the first page of the block. - Each page must be written redundantly in the subsequent page. - The integrated flash controller's "reliable mode" is used, requiring that alternate 2k regions (4 pages) are skipped when writing. For these reasons, a u-boot image can not be written using nandwrite from mtd-utils. Signed-off-by: Mike Dunn --- diff --git a/tools/palmtreo680/flash_u-boot.c b/tools/palmtreo680/flash_u-boot.c new file mode 100644 index 0000000000..3d8296fc6b --- /dev/null +++ b/tools/palmtreo680/flash_u-boot.c @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2013 Mike Dunn + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + * + * + * This is a userspace Linux utility that, when run on the Treo 680, will + * program u-boot to flash. The docg4 driver *must* be loaded with the + * reliable_mode and ignore_badblocks parameters enabled: + * + * modprobe docg4 ignore_badblocks=1 reliable_mode=1 + * + * This utility writes the concatenated spl + u-boot image to the start of the + * mtd device in the format expected by the IPL/SPL. The image file and mtd + * device node are passed to the utility as arguments. The blocks must have + * been erased beforehand. + * + * When you compile this, note that it links to libmtd from mtd-utils, so ensure + * that your include and lib paths include this. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "libmtd.h" + +#define RELIABLE_BLOCKSIZE 0x10000 /* block capacity in reliable mode */ +#define STANDARD_BLOCKSIZE 0x40000 /* block capacity in normal mode */ +#define PAGESIZE 512 +#define PAGES_PER_BLOCK 512 +#define OOBSIZE 7 /* available to user (16 total) */ + +uint8_t ff_oob[OOBSIZE] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; + +/* this is the magic number the IPL looks for (ASCII "BIPO") */ +uint8_t page0_oob[OOBSIZE] = {'B', 'I', 'P', 'O', 0xff, 0xff, 0xff}; + +int main(int argc, char * const argv[]) +{ + int devfd, datafd, num_blocks, block; + off_t file_size; + libmtd_t mtd_desc; + struct mtd_dev_info devinfo; + uint8_t *blockbuf; + char response[8]; + + if (argc != 3) { + printf("usage: %s \n", argv[0]); + return -EINVAL; + } + + mtd_desc = libmtd_open(); + if (mtd_desc == NULL) { + int errsv = errno; + fprintf(stderr, "can't initialize libmtd\n"); + return -errsv; + } + + /* open the spl image file and mtd device */ + datafd = open(argv[1], O_RDONLY); + if (datafd == -1) { + int errsv = errno; + perror(argv[1]); + return -errsv; + } + devfd = open(argv[2], O_WRONLY); + if (devfd == -1) { + int errsv = errno; + perror(argv[2]); + return -errsv; + } + if (mtd_get_dev_info(mtd_desc, argv[2], &devinfo) < 0) { + int errsv = errno; + perror(argv[2]); + return -errsv; + } + + /* determine the number of blocks needed by the image */ + file_size = lseek(datafd, 0, SEEK_END); + if (file_size == (off_t)-1) { + int errsv = errno; + perror("lseek"); + return -errsv; + } + num_blocks = (file_size + RELIABLE_BLOCKSIZE - 1) / RELIABLE_BLOCKSIZE; + file_size = lseek(datafd, 0, SEEK_SET); + if (file_size == (off_t)-1) { + int errsv = errno; + perror("lseek"); + return -errsv; + } + printf("The mtd partition contains %d blocks\n", devinfo.eb_cnt); + printf("U-boot will occupy %d blocks\n", num_blocks); + if (num_blocks > devinfo.eb_cnt) { + fprintf(stderr, "Insufficient blocks on partition\n"); + return -EINVAL; + } + + printf("IMPORTANT: These blocks must be in an erased state!\n"); + printf("Do you want to proceed?\n"); + scanf("%s", response); + if ((response[0] != 'y') && (response[0] != 'Y')) { + printf("Exiting\n"); + close(devfd); + close(datafd); + return 0; + } + + blockbuf = calloc(RELIABLE_BLOCKSIZE, 1); + if (blockbuf == NULL) { + int errsv = errno; + perror("calloc"); + return -errsv; + } + + for (block = 0; block < num_blocks; block++) { + int ofs, page; + uint8_t *pagebuf = blockbuf, *buf = blockbuf; + uint8_t *oobbuf = page0_oob; /* magic num in oob of 1st page */ + size_t len = RELIABLE_BLOCKSIZE; + int ret; + + /* read data for one block from file */ + while (len) { + ssize_t read_ret = read(datafd, buf, len); + if (read_ret == -1) { + int errsv = errno; + if (errno == EINTR) + continue; + perror("read"); + return -errsv; + } else if (read_ret == 0) { + break; /* EOF */ + } + len -= read_ret; + buf += read_ret; + } + + printf("Block %d: writing\r", block + 1); + fflush(stdout); + + for (page = 0, ofs = 0; + page < PAGES_PER_BLOCK; + page++, ofs += PAGESIZE) { + if (page & 0x04) /* Odd-numbered 2k page */ + continue; /* skipped in reliable mode */ + + ret = mtd_write(mtd_desc, &devinfo, devfd, block, ofs, + pagebuf, PAGESIZE, oobbuf, OOBSIZE, + MTD_OPS_PLACE_OOB); + if (ret) { + fprintf(stderr, + "\nmtd_write returned %d on block %d, ofs %x\n", + ret, block + 1, ofs); + return -EIO; + } + oobbuf = ff_oob; /* oob for subsequent pages */ + + if (page & 0x01) /* odd-numbered subpage */ + pagebuf += PAGESIZE; + } + } + + printf("\nDone\n"); + + close(devfd); + close(datafd); + free(blockbuf); + return 0; +}