From: Adrian Schmutzler Date: Thu, 18 Jun 2020 09:48:58 +0000 (+0200) Subject: lantiq: fritz7312: set maximum speed to 100 mbit on 5.4 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=340de1d1545f6da3f21b06a23bb8288da6d992be;p=openwrt%2Fstaging%2Fdangole.git lantiq: fritz7312: set maximum speed to 100 mbit on 5.4 The fritz 7312 does not support 1000 gbit. Advertising it makes it worse. Some NIC will change to 1000 gibt and turn off and on again for ever. The previous patch in 36f628910b8b was only applied to the 4.19 file, so let's just make it consistent with this patch. Cc: Alexander Couzens Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts index aa825abd9f..0f635127f8 100644 --- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts +++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts @@ -108,6 +108,7 @@ phy0: ethernet-phy@0 { reg = <0>; reset-gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + max-speed = <100>; }; }; };