From: Marek Vasut Date: Sun, 9 Jun 2019 01:50:52 +0000 (+0200) Subject: pci: imx: Factor out hard-coded register base addresses X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=33f794be36e846a522c7020e642a1e89c0769b17;p=project%2Fbcm63xx%2Fu-boot.git pci: imx: Factor out hard-coded register base addresses Pull out hard-coded register base addresses into driver private structure in preparation for DM conversion. No functional change. Signed-off-by: Marek Vasut Cc: Bin Meng Cc: Fabio Estevam Cc: Stefano Babic Reviewed-by: Bin Meng --- diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c index fcc4ab7139..173636f48e 100644 --- a/drivers/pci/pcie_imx.c +++ b/drivers/pci/pcie_imx.c @@ -92,6 +92,18 @@ #define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) #define PCIE_ATU_UPPER_TARGET 0x91C +struct imx_pcie_priv { + void __iomem *dbi_base; + void __iomem *cfg_base; +}; + +static struct imx_pcie_priv imx_pcie_priv = { + .dbi_base = (void __iomem *)MX6_DBI_ADDR, + .cfg_base = (void __iomem *)MX6_ROOT_ADDR, +}; + +static struct imx_pcie_priv *priv = &imx_pcie_priv; + /* * PHY access functions */ @@ -231,7 +243,7 @@ static int imx6_pcie_link_up(void) int rx_valid, temp; /* link is debug bit 36, debug register 1 starts at bit 32 */ - rc = readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R1); + rc = readl(priv->dbi_base + PCIE_PHY_DEBUG_R1); if ((rc & PCIE_PHY_DEBUG_R1_LINK_UP) && !(rc & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING)) return -EAGAIN; @@ -243,8 +255,8 @@ static int imx6_pcie_link_up(void) * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition * to gen2 is stuck */ - pcie_phy_read((void *)MX6_DBI_ADDR, PCIE_PHY_RX_ASIC_OUT, &rx_valid); - ltssm = readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R0) & 0x3F; + pcie_phy_read(priv->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid); + ltssm = readl(priv->dbi_base + PCIE_PHY_DEBUG_R0) & 0x3F; if (rx_valid & 0x01) return 0; @@ -254,15 +266,15 @@ static int imx6_pcie_link_up(void) printf("transition to gen2 is stuck, reset PHY!\n"); - pcie_phy_read((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, &temp); + pcie_phy_read(priv->dbi_base, PHY_RX_OVRD_IN_LO, &temp); temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN); - pcie_phy_write((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, temp); + pcie_phy_write(priv->dbi_base, PHY_RX_OVRD_IN_LO, temp); udelay(3000); - pcie_phy_read((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, &temp); + pcie_phy_read(priv->dbi_base, PHY_RX_OVRD_IN_LO, &temp); temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN); - pcie_phy_write((void *)MX6_DBI_ADDR, PHY_RX_OVRD_IN_LO, temp); + pcie_phy_write(priv->dbi_base, PHY_RX_OVRD_IN_LO, temp); return 0; } @@ -285,24 +297,25 @@ static int imx_pcie_regions_setup(void) */ /* CMD reg:I/O space, MEM space, and Bus Master Enable */ - setbits_le32(MX6_DBI_ADDR | PCI_COMMAND, + setbits_le32(priv->dbi_base + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); /* Set the CLASS_REV of RC CFG header to PCI_CLASS_BRIDGE_PCI */ - setbits_le32(MX6_DBI_ADDR + PCI_CLASS_REVISION, + setbits_le32(priv->dbi_base + PCI_CLASS_REVISION, PCI_CLASS_BRIDGE_PCI << 16); /* Region #0 is used for Outbound CFG space access. */ - writel(0, MX6_DBI_ADDR + PCIE_ATU_VIEWPORT); + writel(0, priv->dbi_base + PCIE_ATU_VIEWPORT); - writel(MX6_ROOT_ADDR, MX6_DBI_ADDR + PCIE_ATU_LOWER_BASE); - writel(0, MX6_DBI_ADDR + PCIE_ATU_UPPER_BASE); - writel(MX6_ROOT_ADDR + MX6_ROOT_SIZE, MX6_DBI_ADDR + PCIE_ATU_LIMIT); + writel((u32)priv->cfg_base, priv->dbi_base + PCIE_ATU_LOWER_BASE); + writel(0, priv->dbi_base + PCIE_ATU_UPPER_BASE); + writel((u32)priv->cfg_base + MX6_ROOT_SIZE, + priv->dbi_base + PCIE_ATU_LIMIT); - writel(0, MX6_DBI_ADDR + PCIE_ATU_LOWER_TARGET); - writel(0, MX6_DBI_ADDR + PCIE_ATU_UPPER_TARGET); - writel(PCIE_ATU_TYPE_CFG0, MX6_DBI_ADDR + PCIE_ATU_CR1); - writel(PCIE_ATU_ENABLE, MX6_DBI_ADDR + PCIE_ATU_CR2); + writel(0, priv->dbi_base + PCIE_ATU_LOWER_TARGET); + writel(0, priv->dbi_base + PCIE_ATU_UPPER_TARGET); + writel(PCIE_ATU_TYPE_CFG0, priv->dbi_base + PCIE_ATU_CR1); + writel(PCIE_ATU_ENABLE, priv->dbi_base + PCIE_ATU_CR2); return 0; } @@ -315,18 +328,18 @@ static uint32_t get_bus_address(pci_dev_t d, int where) uint32_t va_address; /* Reconfigure Region #0 */ - writel(0, MX6_DBI_ADDR + PCIE_ATU_VIEWPORT); + writel(0, priv->dbi_base + PCIE_ATU_VIEWPORT); if (PCI_BUS(d) < 2) - writel(PCIE_ATU_TYPE_CFG0, MX6_DBI_ADDR + PCIE_ATU_CR1); + writel(PCIE_ATU_TYPE_CFG0, priv->dbi_base + PCIE_ATU_CR1); else - writel(PCIE_ATU_TYPE_CFG1, MX6_DBI_ADDR + PCIE_ATU_CR1); + writel(PCIE_ATU_TYPE_CFG1, priv->dbi_base + PCIE_ATU_CR1); if (PCI_BUS(d) == 0) { - va_address = MX6_DBI_ADDR; + va_address = (u32)priv->dbi_base; } else { - writel(d << 8, MX6_DBI_ADDR + PCIE_ATU_LOWER_TARGET); - va_address = MX6_IO_ADDR + SZ_16M - SZ_1M; + writel(d << 8, priv->dbi_base + PCIE_ATU_LOWER_TARGET); + va_address = (u32)priv->cfg_base; } va_address += (where & ~0x3); @@ -465,12 +478,12 @@ static int imx6_pcie_assert_core_reset(bool prepare_for_boot) gpr12 = readl(&iomuxc_regs->gpr[12]); if ((gpr1 & IOMUXC_GPR1_PCIE_REF_CLK_EN) && (gpr12 & IOMUXC_GPR12_PCIE_CTL_2)) { - val = readl(MX6_DBI_ADDR + PCIE_PL_PFLR); + val = readl(priv->dbi_base + PCIE_PL_PFLR); val &= ~PCIE_PL_PFLR_LINK_STATE_MASK; val |= PCIE_PL_PFLR_FORCE_LINK; imx_pcie_fix_dabt_handler(true); - writel(val, MX6_DBI_ADDR + PCIE_PL_PFLR); + writel(val, priv->dbi_base + PCIE_PL_PFLR); imx_pcie_fix_dabt_handler(false); gpr12 &= ~IOMUXC_GPR12_PCIE_CTL_2; @@ -621,9 +634,9 @@ static int imx_pcie_link_up(void) * Force the PCIe RC subordinate to 0xff, otherwise no downstream * devices will be detected if the enumeration is applied strictly. */ - tmp = readl(MX6_DBI_ADDR + 0x18); + tmp = readl(priv->dbi_base + 0x18); tmp |= (0xff << 16); - writel(tmp, MX6_DBI_ADDR + 0x18); + writel(tmp, priv->dbi_base + 0x18); /* * FIXME: Force the PCIe RC to Gen1 operation @@ -631,10 +644,10 @@ static int imx_pcie_link_up(void) * up, otherwise no downstream devices are detected. After the * link is up, a managed Gen1->Gen2 transition can be initiated. */ - tmp = readl(MX6_DBI_ADDR + 0x7c); + tmp = readl(priv->dbi_base + 0x7c); tmp &= ~0xf; tmp |= 0x1; - writel(tmp, MX6_DBI_ADDR + 0x7c); + writel(tmp, priv->dbi_base + 0x7c); /* LTSSM enable, starting link. */ setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_APPS_LTSSM_ENABLE); @@ -647,8 +660,8 @@ static int imx_pcie_link_up(void) puts("PCI: pcie phy link never came up\n"); #endif debug("DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n", - readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R0), - readl(MX6_DBI_ADDR + PCIE_PHY_DEBUG_R1)); + readl(priv->dbi_base + PCIE_PHY_DEBUG_R0), + readl(priv->dbi_base + PCIE_PHY_DEBUG_R1)); return -EINVAL; } }