From: Roger Quadros Date: Tue, 24 Sep 2013 08:53:50 +0000 (+0300) Subject: ARM: OMAP2+: usb-host: Adapt to USB phy-nop RESET line changes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=33d7be354025d7273556783e8a8d9408af1d802b;p=openwrt%2Fstaging%2Fblogic.git ARM: OMAP2+: usb-host: Adapt to USB phy-nop RESET line changes The USB phy-nop nop driver expects the RESET line information to be sent as a GPIO number via platform data. Adapt to that. Acked-by: Tony Lindgren Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi --- diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 78ac1c211ece..10855eb4ccc1 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -460,8 +460,7 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) memset(&nop_pdata, 0, sizeof(nop_pdata)); if (gpio_is_valid(phy->vcc_gpio)) nop_pdata.needs_vcc = true; - if (gpio_is_valid(phy->reset_gpio)) - nop_pdata.needs_reset = true; + nop_pdata.gpio_reset = phy->reset_gpio; nop_pdata.type = USB_PHY_TYPE_USB2; /* create a NOP PHY device */ @@ -483,14 +482,6 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id); - /* Do we need RESET regulator ? */ - if (gpio_is_valid(phy->reset_gpio)) { - scnprintf(rail_name, MAX_STR, - "hsusb%d_reset", phy->port); - usbhs_add_regulator(rail_name, phy_id, "reset", - phy->reset_gpio, 1); - } - /* Do we need VCC regulator ? */ if (gpio_is_valid(phy->vcc_gpio)) { scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);