From: Adrian Schmutzler Date: Fri, 14 Aug 2020 11:09:12 +0000 (+0200) Subject: ath79: add support for TP-Link TL-WDR7500 v3 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=33c27ccf4aef677d28246d30e815050ead68b434;p=openwrt%2Fstaging%2Fthess.git ath79: add support for TP-Link TL-WDR7500 v3 This ports support for the TP-Link TL-WDR7500 v3 from ar71xx to ath79. The basic features appear to be identical to the Archer C7 v1, however it has the (supported) QCA9880-BR4A chip of the C7 v2. Specifications: SoC: QCA9558 CPU: 720 MHz Flash: 8 MiB RAM: 128 MiB WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac Qualcomm Atheros QCA9880-BR4A Ethernet: 5x Gbit ports USB: 2x 2.0 ports Flashing instructions: Upload the factory image via the OEM firmware GUI. TFTP recovery appears to be available as well. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wdr7500-v3.dts b/target/linux/ath79/dts/qca9558_tplink_tl-wdr7500-v3.dts new file mode 100644 index 0000000000..04368b9244 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_tplink_tl-wdr7500-v3.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9558_tplink_archer-c.dtsi" + +/ { + compatible = "tplink,tl-wdr7500-v3", "qca,qca9558"; + model = "TP-Link TL-WDR7500 v3"; +}; + +&keys { + rfkill { + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + debounce-interval = <60>; + }; +}; + +&leds { + wlan5g { + label = "green:wlan5g"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; +}; + +&mtdparts { + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + compatible = "tplink,firmware"; + reg = <0x020000 0x7d0000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 5c0195f6ff..149f7b1141 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -311,7 +311,8 @@ ath79_setup_interfaces() tplink,archer-c5-v1|\ tplink,archer-c7-v1|\ tplink,archer-c7-v2|\ - tplink,tl-wdr4900-v2) + tplink,tl-wdr4900-v2|\ + tplink,tl-wdr7500-v3) ucidef_add_switch "switch0" \ "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan" ;; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index ff15414ead..0d09cd3140 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -109,7 +109,8 @@ case "$FIRMWARE" in ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1) ;; tplink,archer-c5-v1|\ - tplink,archer-c7-v2) + tplink,archer-c7-v2|\ + tplink,tl-wdr7500-v3) caldata_extract "art" 0x5000 0x844 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1) ;; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 5088510af0..0058d74f77 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -564,6 +564,18 @@ define Device/tplink_tl-wdr4900-v2 endef TARGET_DEVICES += tplink_tl-wdr4900-v2 +define Device/tplink_tl-wdr7500-v3 + $(Device/tplink-8mlzma) + SOC := qca9558 + DEVICE_MODEL := TL-WDR7500 + DEVICE_VARIANT := v3 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct \ + ath10k-firmware-qca988x-ct + TPLINK_HWID := 0x75000003 + SUPPORTED_DEVICES += archer-c7 +endef +TARGET_DEVICES += tplink_tl-wdr7500-v3 + define Device/tplink_tl-wpa8630-v1 $(Device/tplink-8mlzma) SOC := qca9563