From: Richard Fröhning Date: Mon, 17 Aug 2020 11:14:39 +0000 (+0200) Subject: ramips: add support for TP-Link RE200 v4 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=33b76d66d1afa9d888f32587b18d78a930593ca5;p=openwrt%2Fstaging%2Fblogic.git ramips: add support for TP-Link RE200 v4 TP-Link RE200 v4 is a wireless range extender with Ethernet and 2.4G and 5G WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN like the v2/v3. Specifications -------------- - MediaTek MT7628AN (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet - 8x LED (GPIO-controlled), 2x button - UART connection holes on PCB (57600 8n1) There are 2.4G and 5G LEDs in red and green which are controlled separately. MAC addresses ------------- The MAC address assignment matches stock firmware, i.e.: LAN : *:8E 2.4G: *:8D 5G : *:8C MAC address assignment has been done according to the RE200 v2. The label MAC address matches the OpenWrt ethernet address. Installation ------------ Web Interface ------------- It is possible to upgrade to OpenWrt via the web interface. Simply flash the -factory.bin from OEM. In contrast to a stock firmware, this will not overwrite U-Boot. Recovery -------- Unfortunately, this devices does not offer a recovery mode or a tftp installation method. If the web interface upgrade fails, you have to open your device and attach serial console. Instructions for serial console and recovery may be checked out in commit 6d6f36ae787c ("ramips: add support for TP-Link RE200 v2") or on the device's Wiki page. Signed-off-by: Richard Fröhning [removed empty line, fix commit message formatting] Signed-off-by: David Bauer --- diff --git a/target/linux/ramips/dts/mt7628an_tplink_re200-v4.dts b/target/linux/ramips/dts/mt7628an_tplink_re200-v4.dts new file mode 100644 index 000000000000..83f1f3accadb --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_tplink_re200-v4.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7628an_tplink_re200.dtsi" + +/ { + compatible = "tplink,re200-v4", "mediatek,mt7628an-soc"; + model = "TP-Link RE200 v4"; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 326dcd82bb8b..6327c95bb0f1 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -413,6 +413,16 @@ define Device/tplink_re200-v3 endef TARGET_DEVICES += tplink_re200-v3 +define Device/tplink_re200-v4 + $(Device/tplink-safeloader) + IMAGE_SIZE := 7808k + DEVICE_MODEL := RE200 + DEVICE_VARIANT := v4 + DEVICE_PACKAGES := kmod-mt76x0e + TPLINK_BOARD_ID := RE200-V4 +endef +TARGET_DEVICES += tplink_re200-v4 + define Device/tplink_re220-v2 $(Device/tplink-safeloader) IMAGE_SIZE := 7808k diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index c26d6436e931..e1c3454237aa 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -62,6 +62,7 @@ tplink,archer-c50-v4) ;; tplink,re200-v2|\ tplink,re200-v3|\ +tplink,re200-v4|\ tplink,re220-v2|\ tplink,tl-mr3020-v3|\ tplink,tl-wa801nd-v5) diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index f1687c710852..2cda818b2a7c 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -20,6 +20,7 @@ ramips_setup_interfaces() tama,w06|\ tplink,re200-v2|\ tplink,re200-v3|\ + tplink,re200-v4|\ tplink,re220-v2|\ tplink,re305-v1|\ tplink,tl-mr3020-v3|\ diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 31b9c032d1b4..22427a67e53d 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -1774,6 +1774,50 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system" }, + /** Firmware layout for the RE200 v4 */ + { + .id = "RE200-V4", + .vendor = "", + .support_list = + "SupportList:\n" + "{product_name:RE200,product_ver:4.0.0,special_id:00000000}\n" + "{product_name:RE200,product_ver:4.0.0,special_id:45550000}\n" + "{product_name:RE200,product_ver:4.0.0,special_id:4A500000}\n" + "{product_name:RE200,product_ver:4.0.0,special_id:4B520000}\n" + "{product_name:RE200,product_ver:4.0.0,special_id:43410000}\n" + "{product_name:RE200,product_ver:4.0.0,special_id:41550000}\n" + "{product_name:RE200,product_ver:4.0.0,special_id:42520000}\n" + "{product_name:RE200,product_ver:4.0.0,special_id:55530000}\n" + "{product_name:RE200,product_ver:4.0.0,special_id:41520000}\n" + "{product_name:RE200,product_ver:4.0.0,special_id:52550000}\n" + "{product_name:RE200,product_ver:4.0.0,special_id:54570000}\n" + "{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n" + "{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n" + "{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n", + .support_trail = '\x00', + .soft_ver = "soft_ver:1.1.0\n", + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, + {"firmware", 0x20000, 0x7a0000}, + {"partition-table", 0x7c0000, 0x02000}, + {"default-mac", 0x7c2000, 0x00020}, + {"pin", 0x7c2100, 0x00020}, + {"product-info", 0x7c3100, 0x01000}, + {"soft-version", 0x7c4200, 0x01000}, + {"support-list", 0x7c5200, 0x01000}, + {"profile", 0x7c6200, 0x08000}, + {"config-info", 0x7ce200, 0x00400}, + {"user-config", 0x7d0000, 0x10000}, + {"default-config", 0x7e0000, 0x10000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system" + }, + /** Firmware layout for the RE220 v2 */ { .id = "RE220-V2",