From: Felix Fietkau <nbd@openwrt.org>
Date: Wed, 15 Jul 2015 08:17:36 +0000 (+0000)
Subject: ar8216: adjust ATU flushing in case of link changes
X-Git-Tag: reboot~2472
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=33b72b8e0faf7a39faabece584fd6da61cd8f8df;p=openwrt%2Fstaging%2Fnoltari.git

ar8216: adjust ATU flushing in case of link changes

If a link goes down, don't flush the complete ARL table.
Only flush the entries for the respective port.
Don't touch ARL table if a link goes up.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 46381
---

diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c
index f4c7b8d1e9..9065915f4b 100644
--- a/target/linux/generic/files/drivers/net/phy/ar8216.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.c
@@ -1882,13 +1882,13 @@ ar8xxx_check_link_states(struct ar8xxx_priv *priv)
 
 		priv->link_up[i] = link_new;
 		changed = true;
+		/* flush ARL entries for this port if it went down*/
+		if (!link_new)
+			priv->chip->atu_flush_port(priv, i);
 		dev_info(&priv->phy->dev, "Port %d is %s\n",
 			 i, link_new ? "up" : "down");
 	}
 
-	if (changed)
-		priv->chip->atu_flush(priv);
-
 	mutex_unlock(&priv->reg_mutex);
 
 	return changed;
@@ -1900,9 +1900,7 @@ ar8xxx_phy_read_status(struct phy_device *phydev)
 	struct ar8xxx_priv *priv = phydev->priv;
 	struct switch_port_link link;
 
-	/* check for link changes and flush ATU
-	 * if a change was detected
-	 */
+	/* check for switch port link changes */
 	if (phydev->state == PHY_CHANGELINK)
 		ar8xxx_check_link_states(priv);