From: Jorge Ramirez-Ortiz Date: Sun, 23 Sep 2018 07:41:53 +0000 (+0200) Subject: rcar_gen3: drivers: serial controller interface X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=33947f2e4ff8fabfc6c48602ed2ac2cbc11c1ee3;p=project%2Fbcm63xx%2Fatf.git rcar_gen3: drivers: serial controller interface Signed-off-by: ldts --- diff --git a/drivers/renesas/rcar/scif/scif.S b/drivers/renesas/rcar/scif/scif.S new file mode 100644 index 00000000..1cc0d590 --- /dev/null +++ b/drivers/renesas/rcar/scif/scif.S @@ -0,0 +1,329 @@ +/* + * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include + +#define SCIF_INTERNAL_CLK 0 +#define SCIF_EXTARNAL_CLK 1 +#define SCIF_CLK SCIF_INTERNAL_CLK + +/* product register */ +#define PRR (0xFFF00044) +#define PRR_PRODUCT_MASK (0x00007F00) +#define PRR_CUT_MASK (0x000000FF) +#define PRR_PRODUCT_H3_VER_10 (0x00004F00) +#define PRR_PRODUCT_E3 (0x00005700) + +/* module stop */ +#define CPG_BASE (0xE6150000) +#define CPG_SMSTPCR3 (0x013C) +#define CPG_MSTPSR3 (0x0048) +#define MSTP310 (1 << 10) +#define CPG_CPGWPR (0x0900) + +/* scif */ +#define SCIF2_BASE (0xE6E88000) +#define SCIF_SCSMR (0x00) +#define SCIF_SCBRR (0x04) +#define SCIF_SCSCR (0x08) +#define SCIF_SCFTDR (0x0C) +#define SCIF_SCFSR (0x10) +#define SCIF_SCFRDR (0x14) +#define SCIF_SCFCR (0x18) +#define SCIF_SCFDR (0x1C) +#define SCIF_SCSPTR (0x20) +#define SCIF_SCLSR (0x24) +#define SCIF_DL (0x30) +#define SCIF_CKS (0x34) + +/* mode pin */ +#define RST_MODEMR (0xE6160060) +#define MODEMR_MD12 (0x00001000) + +#define SCSMR_CA_MASK (1 << 7) +#define SCSMR_CA_ASYNC (0x0000) +#define SCSMR_CHR_MASK (1 << 6) +#define SCSMR_CHR_8 (0x0000) +#define SCSMR_PE_MASK (1 << 5) +#define SCSMR_PE_DIS (0x0000) +#define SCSMR_STOP_MASK (1 << 3) +#define SCSMR_STOP_1 (0x0000) +#define SCSMR_CKS_MASK (3 << 0) +#define SCSMR_CKS_DIV1 (0x0000) +#define SCSMR_INIT_DATA (SCSMR_CA_ASYNC + \ + SCSMR_CHR_8 + \ + SCSMR_PE_DIS + \ + SCSMR_STOP_1 + \ + SCSMR_CKS_DIV1) +#define SCBRR_115200BPS (17) +#define SCBRR_115200BPS_E3_SSCG (15) +#define SCBRR_230400BPS (8) + +#define SCSCR_TE_MASK (1 << 5) +#define SCSCR_TE_DIS (0x0000) +#define SCSCR_TE_EN (0x0020) +#define SCSCR_RE_MASK (1 << 4) +#define SCSCR_RE_DIS (0x0000) +#define SCSCR_RE_EN (0x0010) +#define SCSCR_CKE_MASK (3 << 0) +#define SCSCR_CKE_INT (0x0000) +#define SCSCR_CKE_BRG (0x0002) +#if SCIF_CLK == SCIF_EXTARNAL_CLK +#define SCSCR_CKE_INT_CLK (SCSCR_CKE_BRG) +#else +#define SCSCR_CKE_INT_CLK (SCSCR_CKE_INT) +#endif +#define SCFSR_INIT_DATA (0x0000) +#define SCFCR_TTRG_MASK (3 << 4) +#define SCFCR_TTRG_8 (0x0000) +#define SCFCR_TTRG_0 (0x0030) +#define SCFCR_TFRST_MASK (1 << 2) +#define SCFCR_TFRST_DIS (0x0000) +#define SCFCR_TFRST_EN (0x0004) +#define SCFCR_RFRS_MASK (1 << 1) +#define SCFCR_RFRS_DIS (0x0000) +#define SCFCR_RFRS_EN (0x0002) +#define SCFCR_INIT_DATA (SCFCR_TTRG_8) +#define SCFDR_T_MASK (0x1f << 8) +#define DL_INIT_DATA (8) +#define CKS_CKS_DIV_MASK (1 << 15) +#define CKS_CKS_DIV_CLK (0x0000) +#define CKS_XIN_MASK (1 << 14) +#define CKS_XIN_SCIF_CLK (0x0000) +#define CKS_INIT_DATA (CKS_CKS_DIV_CLK + CKS_XIN_SCIF_CLK) + + .globl console_init + .globl console_uninit + .globl console_putc + .globl console_core_init + .globl console_core_putc + .globl console_getc + .globl console_flush + + /* + * The console base is in the data section and not in .bss + * even though it is zero-init. In particular, this allows + * the console functions to start using this variable before + * the runtime memory is initialized for images which do not + * need to copy the .data section from ROM to RAM. + */ + /* ----------------------------------------------- + * int console_init(unsigned long base_addr, + * unsigned int uart_clk, unsigned int baud_rate) + * Function to initialize the console without a + * C Runtime to print debug information. It saves + * the console base to the data section. + * In: x0 - console base address + * w1 - Uart clock in Hz + * w2 - Baud rate + * out: return 1 on success. + * Clobber list : x1 - x3 + * ----------------------------------------------- + */ +func console_init + b console_core_init +endfunc console_init + +func console_uninit + ret +endfunc console_uninit + + /* ----------------------------------------------- + * int console_core_init(unsigned long base_addr, + * unsigned int uart_clk, unsigned int baud_rate) + * Function to initialize the console without a + * C Runtime to print debug information. This + * function will be accessed by console_init and + * crash reporting. + * In: x0 - console base address + * w1 - Uart clock in Hz + * w2 - Baud rate + * Out: return 1 on success + * Clobber list : x1, x2 + * ----------------------------------------------- + */ +func console_core_init + ldr x0, =CPG_BASE + ldr w1, [x0, #CPG_SMSTPCR3] + and w1, w1, #~MSTP310 /* MSTP310=0 */ + mvn w2, w1 + str w2, [x0, #CPG_CPGWPR] + str w1, [x0, #CPG_SMSTPCR3] +5: + ldr w1, [x0, #CPG_MSTPSR3] + and w1, w1, #MSTP310 + cbnz w1, 5b + + ldr x0, =SCIF2_BASE + /* Clear bits TE and RE in SCSCR to 0 */ + mov w1, #(SCSCR_TE_DIS + SCSCR_RE_DIS) + strh w1, [x0, #SCIF_SCSCR] + /* Set bits TFRST and RFRST in SCFCR to 1 */ + ldrh w1, [x0, #SCIF_SCFCR] + orr w1, w1, #(SCFCR_TFRST_EN + SCFCR_RFRS_EN) + strh w1, [x0, #SCIF_SCFCR] + /* Read flags of ER, DR, BRK, and RDF in SCFSR and those of TO and ORER + in SCLSR, then clear them to 0 */ + mov w1, #SCFSR_INIT_DATA + strh w1, [x0, #SCIF_SCFSR] + mov w1, #0 + strh w1, [x0, #SCIF_SCLSR] + /* Set bits CKE[1:0] in SCSCR */ + ldrh w1, [x0, #SCIF_SCSCR] + and w1, w1, #~SCSCR_CKE_MASK + mov w2, #SCSCR_CKE_INT_CLK + orr w1, w1, w2 + strh w1, [x0, #SCIF_SCSCR] + /* Set data transfer format in SCSMR */ + mov w1, #SCSMR_INIT_DATA + strh w1, [x0, #SCIF_SCSMR] + /* Set value in SCBRR */ +#if SCIF_CLK == SCIF_INTERNAL_CLK + ldr x1, =PRR + ldr w1, [x1] + and w1, w1, #(PRR_PRODUCT_MASK | PRR_CUT_MASK) + mov w2, #PRR_PRODUCT_H3_VER_10 + cmp w1, w2 + beq 3f + and w1, w1, #PRR_PRODUCT_MASK + mov w2, #PRR_PRODUCT_E3 + cmp w1, w2 + bne 4f + + ldr x1, =RST_MODEMR + ldr w1, [x1] + and w1, w1, #MODEMR_MD12 + mov w2, #MODEMR_MD12 + cmp w1, w2 + bne 4f + + mov w1, #SCBRR_115200BPS_E3_SSCG + b 2f +4: + mov w1, #SCBRR_115200BPS + b 2f +3: + mov w1, #SCBRR_230400BPS +2: + strb w1, [x0, SCIF_SCBRR] +#else + mov w1, #DL_INIT_DATA + strh w1, [x0, #SCIF_DL] + mov w1, #CKS_INIT_DATA + strh w1, [x0, #SCIF_CKS] +#endif + /* 1-bit interval elapsed */ + mov w1, #100 +1: + subs w1, w1, #1 + cbnz w1, 1b + /* + * Set bits RTRG[1:0], TTRG[1:0], and MCE in SCFCR + * Clear bits FRST and RFRST to 0 + */ + mov w1, #SCFCR_INIT_DATA + strh w1, [x0, #SCIF_SCFCR] + /* Set bits TE and RE in SCSCR to 1 */ + ldrh w1, [x0, #SCIF_SCSCR] + orr w1, w1, #(SCSCR_TE_EN + SCSCR_RE_EN) + strh w1, [x0, #SCIF_SCSCR] + mov x0, #1 + + ret +endfunc console_core_init + + /* --------------------------------------------- + * int console_putc(int c) + * Function to output a character over the + * console. It returns the character printed on + * success or -1 on error. + * In : x0 - character to be printed + * Out : return -1 on error else return character. + * Clobber list : x1, x2 + * --------------------------------------------- + */ +func console_putc + b console_core_putc +endfunc console_putc + + /* -------------------------------------------------------- + * int console_core_putc(int c, unsigned int base_addr) + * Function to output a character over the console. It + * returns the character printed on success or -1 on error. + * In : w0 - character to be printed + * x1 - console base address + * Out : return -1 on error else return character. + * Clobber list : x2 + * -------------------------------------------------------- + */ +func console_core_putc + ldr x1, =SCIF2_BASE + cmp w0, #0xA + /* Prepend '\r' to '\n' */ + bne 2f +1: + /* Check if the transmit FIFO is full */ + ldrh w2, [x1, #SCIF_SCFDR] + ubfx w2, w2, #8, #5 + cmp w2, #16 + bcs 1b + mov w2, #0x0D + strb w2, [x1, #SCIF_SCFTDR] +2: + /* Check if the transmit FIFO is full */ + ldrh w2, [x1, #SCIF_SCFDR] + ubfx w2, w2, #8, #5 + cmp w2, #16 + bcs 2b + strb w0, [x1, #SCIF_SCFTDR] + + ret +endfunc console_core_putc + + /* --------------------------------------------- + * int console_getc(void) + * Function to get a character from the console. + * It returns the character grabbed on success + * or -1 on error. + * Clobber list : x0, x1 + * --------------------------------------------- + */ +func console_getc + mov w0, #-1 + ret +endfunc console_getc + + /* --------------------------------------------- + * int console_flush(void) + * Function to force a write of all buffered + * data that hasn't been output. It returns 0 + * upon successful completion, otherwise it + * returns -1. + * Clobber list : x0, x1 + * --------------------------------------------- + */ +func console_flush + ldr x0, =SCIF2_BASE +1: + ldrh w1, [x0, #SCIF_SCFDR] + ubfx w1, w1, #8, #5 + cmp w1, #0 + bne 1b + + mov x0, #100 + mov x3, x30 + bl rcar_micro_delay + mov x30, x3 + + ldr x0, =SCIF2_BASE + ldrh w1, [x0, #SCIF_SCSCR] + and w1, w1, #~(SCSCR_TE_EN + SCSCR_RE_EN) + strh w1, [x0, #SCIF_SCSCR] + + mov w0, #0 + ret +endfunc console_flush