From: Michael Pratt Date: Thu, 26 Nov 2020 23:57:31 +0000 (-0500) Subject: ath79: create common DTSI for ECB1200 and ECB1750 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=3381392557fe5cd1dd00d6f63dc5aa7e37333021;p=openwrt%2Fstaging%2Fnoltari.git ath79: create common DTSI for ECB1200 and ECB1750 These boards are sister boards exactly the same hardware except that ECB1200 has: - QCA9557 - 2 RF circuits/antennas per band instead of 3 - a resistor blocking UART RX line Tested-by: sven friedmann Signed-off-by: Michael Pratt --- diff --git a/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts b/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts index ee46cd79e7..955f17f0f3 100644 --- a/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts +++ b/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts @@ -1,140 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "qca955x.dtsi" - -#include -#include +#include "qca955x_engenius_ecb1xxx.dtsi" / { compatible = "engenius,ecb1200", "qca,qca9557"; model = "EnGenius ECB1200"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - debounce-interval = <60>; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "amber:power"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - wifi2g { - label = "blue:wifi2g"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - wifi5g { - label = "blue:wifi5g"; - gpios = <&gpio 23 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&spi { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@40000 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x050000 0xf50000>; - }; - - partition@fa0000 { - label = "userconfig"; - reg = <0xfa0000 0x050000>; - read-only; - }; - - partition@ff0000 { - label = "art"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - phy5: ethernet-phy@5 { - reg = <5>; - eee-broken-100tx; - eee-broken-1000t; - }; -}; - -ð0 { - status = "okay"; - - phy-handle = <&phy5>; - phy-mode = "rgmii-id"; - - pll-data = <0x82000000 0x80000101 0x80001313>; - - gmac-config { - device = <&gmac>; - rgmii-enabled = <1>; - }; -}; - -&pcie0 { - status = "okay"; - - wifi@0,0,0 { - compatible = "qcom,ath10k"; - reg = <0x0 0 0 0 0>; - qca,no-eeprom; - }; -}; - -&wmac { - status = "okay"; - - qca,no-eeprom; }; diff --git a/target/linux/ath79/dts/qca9558_engenius_ecb1750.dts b/target/linux/ath79/dts/qca9558_engenius_ecb1750.dts index 159ccc1872..4ee4c8ea69 100644 --- a/target/linux/ath79/dts/qca9558_engenius_ecb1750.dts +++ b/target/linux/ath79/dts/qca9558_engenius_ecb1750.dts @@ -1,139 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "qca955x.dtsi" - -#include -#include +#include "qca955x_engenius_ecb1xxx.dtsi" / { compatible = "engenius,ecb1750", "qca,qca9558"; model = "EnGenius ECB1750"; - - aliases { - led-boot = &led_power_orange; - led-failsafe = &led_power_orange; - led-running = &led_power_orange; - led-upgrade = &led_power_orange; - }; - - leds { - compatible = "gpio-leds"; - - led_power_orange: power_orange { - label = "orange:power"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - wlan2g { - label = "blue:wlan2g"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - wlan5g { - label = "blue:wlan5g"; - gpios = <&gpio 23 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - lan { - label = "blue:lan"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - linux,code = ; - gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&pcie0 { - status = "okay"; -}; - -&uart { - status = "okay"; -}; - -&spi { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - uboot: partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@40000 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x050000 0xf50000>; - }; - - partition@fa0000 { - label = "userconfig"; - reg = <0xfa0000 0x050000>; - read-only; - }; - - art: partition@ff0000 { - label = "art"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; - }; -}; - -&wmac { - status = "okay"; - - qca,no-eeprom; -}; - -&mdio0 { - status = "okay"; - - phy5: ethernet-phy@5 { - reg = <5>; - eee-broken-100tx; - eee-broken-1000t; - }; -}; - -ð0 { - status = "okay"; - - pll-data = <0x9a000000 0x80000101 0x80001313>; - - phy-handle = <&phy5>; - - gmac-config { - device = <&gmac>; - rgmii-gmac0 = <1>; - rxd-delay = <3>; - rxdv-delay = <3>; - }; }; diff --git a/target/linux/ath79/dts/qca955x_engenius_ecb1xxx.dtsi b/target/linux/ath79/dts/qca955x_engenius_ecb1xxx.dtsi new file mode 100644 index 0000000000..0051eb2508 --- /dev/null +++ b/target/linux/ath79/dts/qca955x_engenius_ecb1xxx.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca955x.dtsi" + +#include +#include + +/ { + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + debounce-interval = <60>; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "amber:power"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wifi2g { + label = "blue:wifi2g"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wifi5g { + label = "blue:wifi5g"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x050000 0xf50000>; + }; + + partition@fa0000 { + label = "userconfig"; + reg = <0xfa0000 0x050000>; + read-only; + }; + + partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy5: ethernet-phy@5 { + reg = <5>; + eee-broken-100tx; + eee-broken-1000t; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&phy5>; + phy-mode = "rgmii-id"; + + pll-data = <0x82000000 0x80000101 0x80001313>; + + gmac-config { + device = <&gmac>; + rgmii-enabled = <1>; + }; +}; + +&pcie0 { + status = "okay"; + + wifi@0,0,0 { + compatible = "qcom,ath10k"; + reg = <0x0 0 0 0 0>; + qca,no-eeprom; + }; +}; + +&wmac { + status = "okay"; + + qca,no-eeprom; +};