From: Brian Norris Date: Tue, 22 Feb 2022 08:00:29 +0000 (-0800) Subject: firmware/ipq-wifi: Add Google Wifi board-2.bin X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=331d78a90f3f11e9abfbc114a601c565899e3764;p=openwrt%2Fstaging%2Fchunkeey.git firmware/ipq-wifi: Add Google Wifi board-2.bin From a manufacturer's image (version R89-13729.57.27), with appopriate ',variant=' appended to the board names: $ .../qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder \ -i ./board-google_wifi.qca4019 FileSize: 48596 FileCRC32: 3966df5d FileMD5: d54161b0fb9e93691c4272649c37535a BoardNames[0]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_GALE' BoardLength[0]: 12064 BoardCRC32[0]: e117f336 BoardMD5[0]: ea35e78c88a8571201da8b75edc9b881 BoardNames[1]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_GALE' BoardLength[1]: 12064 BoardCRC32[1]: 6c751ec9 BoardMD5[1]: 44cbc4ca6cb7141ba4249615f7065582 BoardNames[2]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_BREEZE' BoardLength[2]: 12064 BoardCRC32[2]: 24fba117 BoardMD5[2]: b4ac055b3ab67d5a6f5607a96af39a1f BoardNames[3]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_BREEZE' BoardLength[3]: 12064 BoardCRC32[3]: a3e16b2a BoardMD5[3]: 8b26cb285032314247304114b8ac50e7 Naming follows existing Google projects included in upstream board-2.bin -- GO(ogle) prefix, an underscore (_), and the project code name, all in caps. Note that I only tested the "gale" model; the "breeze" model is a later revision (same marketing name) with very small hardware changes but otherwise using the same firmware image. Submitted upstream here: ath10k-firmware: QCA4019: hw1.0: Add Google Wifi BDFs http://lists.infradead.org/pipermail/ath10k/2022-March/013465.html https://lore.kernel.org/ath10k/YjaNGW252Ls%2FyDw8@localhost/ Signed-off-by: Brian Norris --- diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index 9842725be2..5ee9d12919 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -42,6 +42,7 @@ ALLWIFIBOARDS:= \ glinet_gl-ap1300 \ glinet_gl-b2200 \ glinet_gl-s1300 \ + google_wifi \ linksys_ea8300 \ linksys_mr8300-v0 \ luma_wrtq-329acn \ @@ -134,6 +135,7 @@ $(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD12 $(eval $(call generate-ipq-wifi-package,glinet_gl-ap1300,GL.iNet GL-AP1300)) $(eval $(call generate-ipq-wifi-package,glinet_gl-b2200,GL.iNet GL-B2200)) $(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300)) +$(eval $(call generate-ipq-wifi-package,google_wifi,Google WiFi)) $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300)) $(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300)) $(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN)) diff --git a/package/firmware/ipq-wifi/board-google_wifi.qca4019 b/package/firmware/ipq-wifi/board-google_wifi.qca4019 new file mode 100644 index 0000000000..1c10731f0d Binary files /dev/null and b/package/firmware/ipq-wifi/board-google_wifi.qca4019 differ