From: Wenli Looi Date: Thu, 30 Mar 2023 22:28:23 +0000 (+0000) Subject: ramips: add support for Netgear EAX12 series X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=32ea8a9a7e4b1319607ae398e9bf7d8e3c4cd756;p=openwrt%2Fstaging%2Fneocturne.git ramips: add support for Netgear EAX12 series Netgear EAX12, EAX11v2, EAX15v2 are wall-plug 802.11ax (Wi-Fi 6) extenders that share the SoC, WiFi chip, and image format with the WAX202. Specifications: * MT7621, 256 MiB RAM, 128 MiB NAND * MT7915: 2.4/5 GHz 2x2 802.11ax (DBDC) * Ethernet: 1 port 10/100/1000 * UART: 115200 baud (labeled on board) All LEDs and buttons appear to work without state_default. Installation: * Flash the factory image through the stock web interface, or TFTP to the bootloader. NMRP can be used to TFTP without opening the case. Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. References in GPL source: https://www.downloads.netgear.com/files/GPL/EAX12_EAX11v2_EAX15v2_GPL_V1.0.3.34_src.tar.gz * target/linux/ramips/dts/mt7621-rfb-ax-nand.dts DTS file for this device. Signed-off-by: Wenli Looi --- diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index 85a819be31..d4154cda49 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -65,6 +65,7 @@ h3c,tx1801-plus|\ h3c,tx1806|\ jcg,q20|\ linksys,e7350|\ +netgear,eax12|\ netgear,wax202|\ zyxel,wsm20) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" diff --git a/target/linux/ramips/dts/mt7621_netgear_eax12.dts b/target/linux/ramips/dts/mt7621_netgear_eax12.dts new file mode 100644 index 0000000000..d5ad404be0 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_netgear_eax12.dts @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "netgear,eax12", "mediatek,mt7621-soc"; + model = "Netgear EAX12"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_red; + led-running = &led_power_green; + led-upgrade = &led_power_red; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power_green: power_green { + label = "green:power"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + led_power_red: power_red { + label = "red:power"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + + client_green { + label = "green:client"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + client_red { + label = "red:client"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + router_green { + label = "green:router"; + gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + }; + + router_red { + label = "red:router"; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + + wps_green { + label = "green:wps"; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + }; + + eth_green { + label = "green:eth"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + + eth_yellow { + label = "yellow:eth"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "Config"; + reg = <0x80000 0x80000>; + read-only; + }; + + factory: partition@100000 { + label = "Factory"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "firmware"; + reg = <0x180000 0x3800000>; + + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + partition@400000 { + label = "ubi"; + reg = <0x400000 0x3400000>; + }; + }; + + partition@2780000 { + label = "firmware_backup"; + reg = <0x3980000 0x3800000>; + read-only; + }; + + partition@4d80000 { + label = "CFG"; + reg = <0x7180000 0x200000>; + read-only; + }; + + partition@5580000 { + label = "RAE"; + reg = <0x7380000 0x600000>; + read-only; + }; + + partition@5980000 { + label = "POT"; + reg = <0x7980000 0x020000>; + read-only; + }; + + partition@6780000 { + label = "LOG"; + reg = <0x79A0000 0x40000>; + read-only; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + }; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan"; + }; + }; +}; + +&xhci { + status = "disabled"; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index a5b69839a7..ef02807ec1 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1598,6 +1598,32 @@ define Device/mts_wg430223 endef TARGET_DEVICES += mts_wg430223 +define Device/netgear_eax12 + $(Device/nand) + DEVICE_VENDOR := NETGEAR + DEVICE_MODEL := EAX12 + DEVICE_ALT0_VENDOR := NETGEAR + DEVICE_ALT0_MODEL := EAX11 + DEVICE_ALT0_VARIANT := v2 + DEVICE_ALT1_VENDOR := NETGEAR + DEVICE_ALT1_MODEL := EAX15 + DEVICE_ALT1_VARIANT := v2 + DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools + NETGEAR_ENC_MODEL := EAX12 + NETGEAR_ENC_REGION := US + NETGEAR_ENC_HW_ID_LIST := 1010000004540000_NETGEAR + NETGEAR_ENC_MODEL_LIST := EAX12;EAX11v2;EAX15v2 + IMAGE_SIZE := 57344k + KERNEL_LOADADDR := 0x82000000 + KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \ + append-squashfs4-fakeroot + IMAGES += factory.img + IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \ + append-ubi | check-size | netgear-encrypted-factory +endef +TARGET_DEVICES += netgear_eax12 + define Device/netgear_ex6150 $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 9b15da0d22..188605a671 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -138,6 +138,10 @@ mikrotik,routerboard-m11g) mtc,wr1201) ucidef_set_led_netdev "eth_link" "LAN link" "green:eth_link" "br-lan" ;; +netgear,eax12) + ucidef_set_led_netdev "eth_act" "LAN act" "yellow:eth" "lan" "tx rx" + ucidef_set_led_netdev "eth_link" "LAN link" "green:eth" "lan" "link" + ;; netgear,r6220|\ netgear,r6260|\ netgear,r6350|\ diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index cd746e84ee..180713d964 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -20,6 +20,7 @@ ramips_setup_interfaces() linksys,re7000|\ mikrotik,ltap-2hnd|\ mikrotik,routerboard-m11g|\ + netgear,eax12|\ netgear,ex6150|\ sercomm,na502|\ sercomm,na502s|\ @@ -275,6 +276,10 @@ ramips_setup_macs() label_mac=$wan_mac lan_mac=$(macaddr_add "$wan_mac" 2) ;; + netgear,eax12) + lan_mac=$(mtd_get_mac_ascii Config mac) + label_mac=$lan_mac + ;; netgear,wax202) lan_mac=$(mtd_get_mac_ascii Config mac) wan_mac=$(macaddr_add "$lan_mac" 1) diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 80c7273543..b36ac028b0 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -118,6 +118,11 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress ;; + netgear,eax12) + hw_mac_addr=$(mtd_get_mac_ascii Config mac) + [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress + ;; netgear,wax202) hw_mac_addr=$(mtd_get_mac_ascii Config mac) [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index cef58ec3ba..fa4b8fcc82 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -87,6 +87,7 @@ platform_do_upgrade() { linksys,ea8100-v1|\ linksys,ea8100-v2|\ mts,wg430223|\ + netgear,eax12|\ netgear,r6220|\ netgear,r6260|\ netgear,r6350|\