From: Jody McIntyre Date: Fri, 30 Sep 2005 18:59:08 +0000 (-0700) Subject: [PATCH] ieee1394: reorder activities after bus reset (fixes device detection) X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=328699bf0ff4d35a9932ce279441f955e78a890e;p=openwrt%2Fstaging%2Fblogic.git [PATCH] ieee1394: reorder activities after bus reset (fixes device detection) Units were not detected if the local IRM performed a bus reset. ("The root node is not cycle master capable; selecting a new root node and resetting...", often seen with iPods and other SBP-2 devices). Rearrange the order of IRM duties and node scanning. TODO: Audit the ROM caching and parsing code for underlying issues. Signed-off-by: Stefan Richter Signed-off-by: Jody McIntyre Cc: Ben Collins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index b23322523ef5..743f13c81adb 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -1438,9 +1438,13 @@ static int nodemgr_do_irm_duties(struct hpsb_host *host, int cycles) if (host->busmgr_id == 0xffff && host->node_count > 1) { u16 root_node = host->node_count - 1; - struct node_entry *ne = find_entry_by_nodeid(host, root_node | LOCAL_BUS); - if (ne && ne->busopt.cmc) + /* get cycle master capability flag from root node */ + if (host->is_cycmst || + (!hpsb_read(host, LOCAL_BUS | root_node, get_hpsb_generation(host), + (CSR_REGISTER_BASE + CSR_CONFIG_ROM + 2 * sizeof(quadlet_t)), + &bc, sizeof(quadlet_t)) && + be32_to_cpu(bc) & 1 << CSR_CMC_SHIFT)) hpsb_send_phy_config(host, root_node, -1); else { HPSB_DEBUG("The root node is not cycle master capable; " @@ -1557,24 +1561,19 @@ static int nodemgr_host_thread(void *__hi) } } - if (!nodemgr_check_irm_capability(host, reset_cycles)) { + if (!nodemgr_check_irm_capability(host, reset_cycles) || + !nodemgr_do_irm_duties(host, reset_cycles)) { reset_cycles++; up(&nodemgr_serialize); continue; } + reset_cycles = 0; /* Scan our nodes to get the bus options and create node * entries. This does not do the sysfs stuff, since that * would trigger hotplug callbacks and such, which is a * bad idea at this point. */ nodemgr_node_scan(hi, generation); - if (!nodemgr_do_irm_duties(host, reset_cycles)) { - reset_cycles++; - up(&nodemgr_serialize); - continue; - } - - reset_cycles = 0; /* This actually does the full probe, with sysfs * registration. */