From: Ansuel Smith Date: Wed, 2 Feb 2022 21:32:57 +0000 (+0100) Subject: generic: 5.15: backport mdio improvement patch for qca8k X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=327b6dbd98ed98be04eb891d9682ae212fe9f09d;p=openwrt%2Fstaging%2F981213.git generic: 5.15: backport mdio improvement patch for qca8k Backport qca8k mdio improvement patch merged upstream, where we use eth packet when available to send mdio commands. This should improve speed and cause less load on the CPU. Signed-off-by: Ansuel Smith --- diff --git a/target/linux/generic/backport-5.15/700-net-next-net-dsa-introduce-tagger-owned-storage-for-private.patch b/target/linux/generic/backport-5.15/700-net-next-net-dsa-introduce-tagger-owned-storage-for-private.patch new file mode 100644 index 0000000000..019d0d5ee8 --- /dev/null +++ b/target/linux/generic/backport-5.15/700-net-next-net-dsa-introduce-tagger-owned-storage-for-private.patch @@ -0,0 +1,290 @@ +From dc452a471dbae8aca8257c565174212620880093 Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Fri, 10 Dec 2021 01:34:37 +0200 +Subject: net: dsa: introduce tagger-owned storage for private and shared data + +Ansuel is working on register access over Ethernet for the qca8k switch +family. This requires the qca8k tagging protocol driver to receive +frames which aren't intended for the network stack, but instead for the +qca8k switch driver itself. + +The dp->priv is currently the prevailing method for passing data back +and forth between the tagging protocol driver and the switch driver. +However, this method is riddled with caveats. + +The DSA design allows in principle for any switch driver to return any +protocol it desires in ->get_tag_protocol(). The dsa_loop driver can be +modified to do just that. But in the current design, the memory behind +dp->priv has to be allocated by the switch driver, so if the tagging +protocol is paired to an unexpected switch driver, we may end up in NULL +pointer dereferences inside the kernel, or worse (a switch driver may +allocate dp->priv according to the expectations of a different tagger). + +The latter possibility is even more plausible considering that DSA +switches can dynamically change tagging protocols in certain cases +(dsa <-> edsa, ocelot <-> ocelot-8021q), and the current design lends +itself to mistakes that are all too easy to make. + +This patch proposes that the tagging protocol driver should manage its +own memory, instead of relying on the switch driver to do so. +After analyzing the different in-tree needs, it can be observed that the +required tagger storage is per switch, therefore a ds->tagger_data +pointer is introduced. In principle, per-port storage could also be +introduced, although there is no need for it at the moment. Future +changes will replace the current usage of dp->priv with ds->tagger_data. + +We define a "binding" event between the DSA switch tree and the tagging +protocol. During this binding event, the tagging protocol's ->connect() +method is called first, and this may allocate some memory for each +switch of the tree. Then a cross-chip notifier is emitted for the +switches within that tree, and they are given the opportunity to fix up +the tagger's memory (for example, they might set up some function +pointers that represent virtual methods for consuming packets). +Because the memory is owned by the tagger, there exists a ->disconnect() +method for the tagger (which is the place to free the resources), but +there doesn't exist a ->disconnect() method for the switch driver. +This is part of the design. The switch driver should make minimal use of +the public part of the tagger data, and only after type-checking it +using the supplied "proto" argument. + +In the code there are in fact two binding events, one is the initial +event in dsa_switch_setup_tag_protocol(). At this stage, the cross chip +notifier chains aren't initialized, so we call each switch's connect() +method by hand. Then there is dsa_tree_bind_tag_proto() during +dsa_tree_change_tag_proto(), and here we have an old protocol and a new +one. We first connect to the new one before disconnecting from the old +one, to simplify error handling a bit and to ensure we remain in a valid +state at all times. + +Co-developed-by: Ansuel Smith +Signed-off-by: Ansuel Smith +Signed-off-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + include/net/dsa.h | 12 +++++++++ + net/dsa/dsa2.c | 73 +++++++++++++++++++++++++++++++++++++++++++++++++++--- + net/dsa/dsa_priv.h | 1 + + net/dsa/switch.c | 14 +++++++++++ + 4 files changed, 96 insertions(+), 4 deletions(-) + +diff --git a/include/net/dsa.h b/include/net/dsa.h +index bdf308a5c55ee..8b496c7e62ef8 100644 +--- a/include/net/dsa.h ++++ b/include/net/dsa.h +@@ -82,12 +82,15 @@ enum dsa_tag_protocol { + }; + + struct dsa_switch; ++struct dsa_switch_tree; + + struct dsa_device_ops { + struct sk_buff *(*xmit)(struct sk_buff *skb, struct net_device *dev); + struct sk_buff *(*rcv)(struct sk_buff *skb, struct net_device *dev); + void (*flow_dissect)(const struct sk_buff *skb, __be16 *proto, + int *offset); ++ int (*connect)(struct dsa_switch_tree *dst); ++ void (*disconnect)(struct dsa_switch_tree *dst); + unsigned int needed_headroom; + unsigned int needed_tailroom; + const char *name; +@@ -337,6 +340,8 @@ struct dsa_switch { + */ + void *priv; + ++ void *tagger_data; ++ + /* + * Configuration data for this switch. + */ +@@ -689,6 +694,13 @@ struct dsa_switch_ops { + enum dsa_tag_protocol mprot); + int (*change_tag_protocol)(struct dsa_switch *ds, int port, + enum dsa_tag_protocol proto); ++ /* ++ * Method for switch drivers to connect to the tagging protocol driver ++ * in current use. The switch driver can provide handlers for certain ++ * types of packets for switch management. ++ */ ++ int (*connect_tag_protocol)(struct dsa_switch *ds, ++ enum dsa_tag_protocol proto); + + /* Optional switch-wide initialization and destruction methods */ + int (*setup)(struct dsa_switch *ds); +diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c +index 8814fa0e44c84..cf65661686209 100644 +--- a/net/dsa/dsa2.c ++++ b/net/dsa/dsa2.c +@@ -248,8 +248,12 @@ static struct dsa_switch_tree *dsa_tree_alloc(int index) + + static void dsa_tree_free(struct dsa_switch_tree *dst) + { +- if (dst->tag_ops) ++ if (dst->tag_ops) { ++ if (dst->tag_ops->disconnect) ++ dst->tag_ops->disconnect(dst); ++ + dsa_tag_driver_put(dst->tag_ops); ++ } + list_del(&dst->list); + kfree(dst); + } +@@ -822,7 +826,7 @@ static int dsa_switch_setup_tag_protocol(struct dsa_switch *ds) + int err; + + if (tag_ops->proto == dst->default_proto) +- return 0; ++ goto connect; + + dsa_switch_for_each_cpu_port(cpu_dp, ds) { + rtnl_lock(); +@@ -836,6 +840,17 @@ static int dsa_switch_setup_tag_protocol(struct dsa_switch *ds) + } + } + ++connect: ++ if (ds->ops->connect_tag_protocol) { ++ err = ds->ops->connect_tag_protocol(ds, tag_ops->proto); ++ if (err) { ++ dev_err(ds->dev, ++ "Unable to connect to tag protocol \"%s\": %pe\n", ++ tag_ops->name, ERR_PTR(err)); ++ return err; ++ } ++ } ++ + return 0; + } + +@@ -1136,6 +1151,46 @@ static void dsa_tree_teardown(struct dsa_switch_tree *dst) + dst->setup = false; + } + ++static int dsa_tree_bind_tag_proto(struct dsa_switch_tree *dst, ++ const struct dsa_device_ops *tag_ops) ++{ ++ const struct dsa_device_ops *old_tag_ops = dst->tag_ops; ++ struct dsa_notifier_tag_proto_info info; ++ int err; ++ ++ dst->tag_ops = tag_ops; ++ ++ /* Notify the new tagger about the connection to this tree */ ++ if (tag_ops->connect) { ++ err = tag_ops->connect(dst); ++ if (err) ++ goto out_revert; ++ } ++ ++ /* Notify the switches from this tree about the connection ++ * to the new tagger ++ */ ++ info.tag_ops = tag_ops; ++ err = dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_CONNECT, &info); ++ if (err && err != -EOPNOTSUPP) ++ goto out_disconnect; ++ ++ /* Notify the old tagger about the disconnection from this tree */ ++ if (old_tag_ops->disconnect) ++ old_tag_ops->disconnect(dst); ++ ++ return 0; ++ ++out_disconnect: ++ /* Revert the new tagger's connection to this tree */ ++ if (tag_ops->disconnect) ++ tag_ops->disconnect(dst); ++out_revert: ++ dst->tag_ops = old_tag_ops; ++ ++ return err; ++} ++ + /* Since the dsa/tagging sysfs device attribute is per master, the assumption + * is that all DSA switches within a tree share the same tagger, otherwise + * they would have formed disjoint trees (different "dsa,member" values). +@@ -1168,12 +1223,15 @@ int dsa_tree_change_tag_proto(struct dsa_switch_tree *dst, + goto out_unlock; + } + ++ /* Notify the tag protocol change */ + info.tag_ops = tag_ops; + err = dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO, &info); + if (err) +- goto out_unwind_tagger; ++ return err; + +- dst->tag_ops = tag_ops; ++ err = dsa_tree_bind_tag_proto(dst, tag_ops); ++ if (err) ++ goto out_unwind_tagger; + + rtnl_unlock(); + +@@ -1260,6 +1318,7 @@ static int dsa_port_parse_cpu(struct dsa_port *dp, struct net_device *master, + struct dsa_switch_tree *dst = ds->dst; + const struct dsa_device_ops *tag_ops; + enum dsa_tag_protocol default_proto; ++ int err; + + /* Find out which protocol the switch would prefer. */ + default_proto = dsa_get_tag_protocol(dp, master); +@@ -1307,6 +1366,12 @@ static int dsa_port_parse_cpu(struct dsa_port *dp, struct net_device *master, + */ + dsa_tag_driver_put(tag_ops); + } else { ++ if (tag_ops->connect) { ++ err = tag_ops->connect(dst); ++ if (err) ++ return err; ++ } ++ + dst->tag_ops = tag_ops; + } + +diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h +index 38ce5129a33dc..0db2b26b0c83c 100644 +--- a/net/dsa/dsa_priv.h ++++ b/net/dsa/dsa_priv.h +@@ -37,6 +37,7 @@ enum { + DSA_NOTIFIER_VLAN_DEL, + DSA_NOTIFIER_MTU, + DSA_NOTIFIER_TAG_PROTO, ++ DSA_NOTIFIER_TAG_PROTO_CONNECT, + DSA_NOTIFIER_MRP_ADD, + DSA_NOTIFIER_MRP_DEL, + DSA_NOTIFIER_MRP_ADD_RING_ROLE, +diff --git a/net/dsa/switch.c b/net/dsa/switch.c +index 9c92edd969612..06948f5368296 100644 +--- a/net/dsa/switch.c ++++ b/net/dsa/switch.c +@@ -647,6 +647,17 @@ static int dsa_switch_change_tag_proto(struct dsa_switch *ds, + return 0; + } + ++static int dsa_switch_connect_tag_proto(struct dsa_switch *ds, ++ struct dsa_notifier_tag_proto_info *info) ++{ ++ const struct dsa_device_ops *tag_ops = info->tag_ops; ++ ++ if (!ds->ops->connect_tag_protocol) ++ return -EOPNOTSUPP; ++ ++ return ds->ops->connect_tag_protocol(ds, tag_ops->proto); ++} ++ + static int dsa_switch_mrp_add(struct dsa_switch *ds, + struct dsa_notifier_mrp_info *info) + { +@@ -766,6 +777,9 @@ static int dsa_switch_event(struct notifier_block *nb, + case DSA_NOTIFIER_TAG_PROTO: + err = dsa_switch_change_tag_proto(ds, info); + break; ++ case DSA_NOTIFIER_TAG_PROTO_CONNECT: ++ err = dsa_switch_connect_tag_proto(ds, info); ++ break; + case DSA_NOTIFIER_MRP_ADD: + err = dsa_switch_mrp_add(ds, info); + break; +-- +cgit 1.2.3-1.el7 + diff --git a/target/linux/generic/backport-5.15/701-net-dsa-make-tagging-protocols-connect-to-individual-switches.patch b/target/linux/generic/backport-5.15/701-net-dsa-make-tagging-protocols-connect-to-individual-switches.patch new file mode 100644 index 0000000000..fa3752ac34 --- /dev/null +++ b/target/linux/generic/backport-5.15/701-net-dsa-make-tagging-protocols-connect-to-individual-switches.patch @@ -0,0 +1,285 @@ +From 7f2973149c22e7a6fee4c0c9fa6b8e4108e9c208 Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Tue, 14 Dec 2021 03:45:36 +0200 +Subject: net: dsa: make tagging protocols connect to individual switches from + a tree + +On the NXP Bluebox 3 board which uses a multi-switch setup with sja1105, +the mechanism through which the tagger connects to the switch tree is +broken, due to improper DSA code design. At the time when tag_ops->connect() +is called in dsa_port_parse_cpu(), DSA hasn't finished "touching" all +the ports, so it doesn't know how large the tree is and how many ports +it has. It has just seen the first CPU port by this time. As a result, +this function will call the tagger's ->connect method too early, and the +tagger will connect only to the first switch from the tree. + +This could be perhaps addressed a bit more simply by just moving the +tag_ops->connect(dst) call a bit later (for example in dsa_tree_setup), +but there is already a design inconsistency at present: on the switch +side, the notification is on a per-switch basis, but on the tagger side, +it is on a per-tree basis. Furthermore, the persistent storage itself is +per switch (ds->tagger_data). And the tagger connect and disconnect +procedures (at least the ones that exist currently) could see a fair bit +of simplification if they didn't have to iterate through the switches of +a tree. + +To fix the issue, this change transforms tag_ops->connect(dst) into +tag_ops->connect(ds) and moves it somewhere where we already iterate +over all switches of a tree. That is in dsa_switch_setup_tag_protocol(), +which is a good placement because we already have there the connection +call to the switch side of things. + +As for the dsa_tree_bind_tag_proto() method (called from the code path +that changes the tag protocol), things are a bit more complicated +because we receive the tree as argument, yet when we unwind on errors, +it would be nice to not call tag_ops->disconnect(ds) where we didn't +previously call tag_ops->connect(ds). We didn't have this problem before +because the tag_ops connection operations passed the entire dst before, +and this is more fine grained now. To solve the error rewind case using +the new API, we have to create yet one more cross-chip notifier for +disconnection, and stay connected with the old tag protocol to all the +switches in the tree until we've succeeded to connect with the new one +as well. So if something fails half way, the whole tree is still +connected to the old tagger. But there may still be leaks if the tagger +fails to connect to the 2nd out of 3 switches in a tree: somebody needs +to tell the tagger to disconnect from the first switch. Nothing comes +for free, and this was previously handled privately by the tagging +protocol driver before, but now we need to emit a disconnect cross-chip +notifier for that, because DSA has to take care of the unwind path. We +assume that the tagging protocol has connected to a switch if it has set +ds->tagger_data to something, otherwise we avoid calling its +disconnection method in the error rewind path. + +The rest of the changes are in the tagging protocol drivers, and have to +do with the replacement of dst with ds. The iteration is removed and the +error unwind path is simplified, as mentioned above. + +Signed-off-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + include/net/dsa.h | 5 ++-- + net/dsa/dsa2.c | 44 +++++++++++++----------------- + net/dsa/dsa_priv.h | 1 + + net/dsa/switch.c | 52 ++++++++++++++++++++++++++++++++--- + net/dsa/tag_ocelot_8021q.c | 53 +++++++++++------------------------- + net/dsa/tag_sja1105.c | 67 ++++++++++++++++------------------------------ + 6 files changed, 109 insertions(+), 113 deletions(-) + +diff --git a/include/net/dsa.h b/include/net/dsa.h +index 64d71968aa91a..f16959444ae12 100644 +--- a/include/net/dsa.h ++++ b/include/net/dsa.h +@@ -82,15 +82,14 @@ enum dsa_tag_protocol { + }; + + struct dsa_switch; +-struct dsa_switch_tree; + + struct dsa_device_ops { + struct sk_buff *(*xmit)(struct sk_buff *skb, struct net_device *dev); + struct sk_buff *(*rcv)(struct sk_buff *skb, struct net_device *dev); + void (*flow_dissect)(const struct sk_buff *skb, __be16 *proto, + int *offset); +- int (*connect)(struct dsa_switch_tree *dst); +- void (*disconnect)(struct dsa_switch_tree *dst); ++ int (*connect)(struct dsa_switch *ds); ++ void (*disconnect)(struct dsa_switch *ds); + unsigned int needed_headroom; + unsigned int needed_tailroom; + const char *name; +diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c +index cf65661686209..c18b22c0bf55e 100644 +--- a/net/dsa/dsa2.c ++++ b/net/dsa/dsa2.c +@@ -248,12 +248,8 @@ static struct dsa_switch_tree *dsa_tree_alloc(int index) + + static void dsa_tree_free(struct dsa_switch_tree *dst) + { +- if (dst->tag_ops) { +- if (dst->tag_ops->disconnect) +- dst->tag_ops->disconnect(dst); +- ++ if (dst->tag_ops) + dsa_tag_driver_put(dst->tag_ops); +- } + list_del(&dst->list); + kfree(dst); + } +@@ -841,17 +837,29 @@ static int dsa_switch_setup_tag_protocol(struct dsa_switch *ds) + } + + connect: ++ if (tag_ops->connect) { ++ err = tag_ops->connect(ds); ++ if (err) ++ return err; ++ } ++ + if (ds->ops->connect_tag_protocol) { + err = ds->ops->connect_tag_protocol(ds, tag_ops->proto); + if (err) { + dev_err(ds->dev, + "Unable to connect to tag protocol \"%s\": %pe\n", + tag_ops->name, ERR_PTR(err)); +- return err; ++ goto disconnect; + } + } + + return 0; ++ ++disconnect: ++ if (tag_ops->disconnect) ++ tag_ops->disconnect(ds); ++ ++ return err; + } + + static int dsa_switch_setup(struct dsa_switch *ds) +@@ -1160,13 +1168,6 @@ static int dsa_tree_bind_tag_proto(struct dsa_switch_tree *dst, + + dst->tag_ops = tag_ops; + +- /* Notify the new tagger about the connection to this tree */ +- if (tag_ops->connect) { +- err = tag_ops->connect(dst); +- if (err) +- goto out_revert; +- } +- + /* Notify the switches from this tree about the connection + * to the new tagger + */ +@@ -1176,16 +1177,14 @@ static int dsa_tree_bind_tag_proto(struct dsa_switch_tree *dst, + goto out_disconnect; + + /* Notify the old tagger about the disconnection from this tree */ +- if (old_tag_ops->disconnect) +- old_tag_ops->disconnect(dst); ++ info.tag_ops = old_tag_ops; ++ dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_DISCONNECT, &info); + + return 0; + + out_disconnect: +- /* Revert the new tagger's connection to this tree */ +- if (tag_ops->disconnect) +- tag_ops->disconnect(dst); +-out_revert: ++ info.tag_ops = tag_ops; ++ dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_DISCONNECT, &info); + dst->tag_ops = old_tag_ops; + + return err; +@@ -1318,7 +1317,6 @@ static int dsa_port_parse_cpu(struct dsa_port *dp, struct net_device *master, + struct dsa_switch_tree *dst = ds->dst; + const struct dsa_device_ops *tag_ops; + enum dsa_tag_protocol default_proto; +- int err; + + /* Find out which protocol the switch would prefer. */ + default_proto = dsa_get_tag_protocol(dp, master); +@@ -1366,12 +1364,6 @@ static int dsa_port_parse_cpu(struct dsa_port *dp, struct net_device *master, + */ + dsa_tag_driver_put(tag_ops); + } else { +- if (tag_ops->connect) { +- err = tag_ops->connect(dst); +- if (err) +- return err; +- } +- + dst->tag_ops = tag_ops; + } + +diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h +index 0db2b26b0c83c..edfaae7b59672 100644 +--- a/net/dsa/dsa_priv.h ++++ b/net/dsa/dsa_priv.h +@@ -38,6 +38,7 @@ enum { + DSA_NOTIFIER_MTU, + DSA_NOTIFIER_TAG_PROTO, + DSA_NOTIFIER_TAG_PROTO_CONNECT, ++ DSA_NOTIFIER_TAG_PROTO_DISCONNECT, + DSA_NOTIFIER_MRP_ADD, + DSA_NOTIFIER_MRP_DEL, + DSA_NOTIFIER_MRP_ADD_RING_ROLE, +diff --git a/net/dsa/switch.c b/net/dsa/switch.c +index 06948f5368296..393f2d8a860a9 100644 +--- a/net/dsa/switch.c ++++ b/net/dsa/switch.c +@@ -647,15 +647,58 @@ static int dsa_switch_change_tag_proto(struct dsa_switch *ds, + return 0; + } + +-static int dsa_switch_connect_tag_proto(struct dsa_switch *ds, +- struct dsa_notifier_tag_proto_info *info) ++/* We use the same cross-chip notifiers to inform both the tagger side, as well ++ * as the switch side, of connection and disconnection events. ++ * Since ds->tagger_data is owned by the tagger, it isn't a hard error if the ++ * switch side doesn't support connecting to this tagger, and therefore, the ++ * fact that we don't disconnect the tagger side doesn't constitute a memory ++ * leak: the tagger will still operate with persistent per-switch memory, just ++ * with the switch side unconnected to it. What does constitute a hard error is ++ * when the switch side supports connecting but fails. ++ */ ++static int ++dsa_switch_connect_tag_proto(struct dsa_switch *ds, ++ struct dsa_notifier_tag_proto_info *info) + { + const struct dsa_device_ops *tag_ops = info->tag_ops; ++ int err; ++ ++ /* Notify the new tagger about the connection to this switch */ ++ if (tag_ops->connect) { ++ err = tag_ops->connect(ds); ++ if (err) ++ return err; ++ } + + if (!ds->ops->connect_tag_protocol) + return -EOPNOTSUPP; + +- return ds->ops->connect_tag_protocol(ds, tag_ops->proto); ++ /* Notify the switch about the connection to the new tagger */ ++ err = ds->ops->connect_tag_protocol(ds, tag_ops->proto); ++ if (err) { ++ /* Revert the new tagger's connection to this tree */ ++ if (tag_ops->disconnect) ++ tag_ops->disconnect(ds); ++ return err; ++ } ++ ++ return 0; ++} ++ ++static int ++dsa_switch_disconnect_tag_proto(struct dsa_switch *ds, ++ struct dsa_notifier_tag_proto_info *info) ++{ ++ const struct dsa_device_ops *tag_ops = info->tag_ops; ++ ++ /* Notify the tagger about the disconnection from this switch */ ++ if (tag_ops->disconnect && ds->tagger_data) ++ tag_ops->disconnect(ds); ++ ++ /* No need to notify the switch, since it shouldn't have any ++ * resources to tear down ++ */ ++ return 0; + } + + static int dsa_switch_mrp_add(struct dsa_switch *ds, +@@ -780,6 +823,9 @@ static int dsa_switch_event(struct notifier_block *nb, + case DSA_NOTIFIER_TAG_PROTO_CONNECT: + err = dsa_switch_connect_tag_proto(ds, info); + break; ++ case DSA_NOTIFIER_TAG_PROTO_DISCONNECT: ++ err = dsa_switch_disconnect_tag_proto(ds, info); ++ break; + case DSA_NOTIFIER_MRP_ADD: + err = dsa_switch_mrp_add(ds, info); + break; +-- +cgit 1.2.3-1.el7 + diff --git a/target/linux/generic/backport-5.15/765-1-net-next-net-dsa-reorder-PHY-initialization-with-MTU-setup-in.patch b/target/linux/generic/backport-5.15/765-1-net-next-net-dsa-reorder-PHY-initialization-with-MTU-setup-in.patch new file mode 100644 index 0000000000..25c6ac2e8f --- /dev/null +++ b/target/linux/generic/backport-5.15/765-1-net-next-net-dsa-reorder-PHY-initialization-with-MTU-setup-in.patch @@ -0,0 +1,57 @@ +From 904e112ad431492b34f235f59738e8312802bbf9 Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Thu, 6 Jan 2022 01:11:12 +0200 +Subject: [PATCH 1/6] net: dsa: reorder PHY initialization with MTU setup in + slave.c + +In dsa_slave_create() there are 2 sections that take rtnl_lock(): +MTU change and netdev registration. They are separated by PHY +initialization. + +There isn't any strict ordering requirement except for the fact that +netdev registration should be last. Therefore, we can perform the MTU +change a bit later, after the PHY setup. A future change will then be +able to merge the two rtnl_lock sections into one. + +Signed-off-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + net/dsa/slave.c | 14 +++++++------- + 1 file changed, 7 insertions(+), 7 deletions(-) + +diff --git a/net/dsa/slave.c b/net/dsa/slave.c +index 88f7b8686dac..88bcdba92fa7 100644 +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -2011,13 +2011,6 @@ int dsa_slave_create(struct dsa_port *port) + port->slave = slave_dev; + dsa_slave_setup_tagger(slave_dev); + +- rtnl_lock(); +- ret = dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN); +- rtnl_unlock(); +- if (ret && ret != -EOPNOTSUPP) +- dev_warn(ds->dev, "nonfatal error %d setting MTU to %d on port %d\n", +- ret, ETH_DATA_LEN, port->index); +- + netif_carrier_off(slave_dev); + + ret = dsa_slave_phy_setup(slave_dev); +@@ -2028,6 +2021,13 @@ int dsa_slave_create(struct dsa_port *port) + goto out_gcells; + } + ++ rtnl_lock(); ++ ret = dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN); ++ rtnl_unlock(); ++ if (ret && ret != -EOPNOTSUPP) ++ dev_warn(ds->dev, "nonfatal error %d setting MTU to %d on port %d\n", ++ ret, ETH_DATA_LEN, port->index); ++ + rtnl_lock(); + + ret = register_netdevice(slave_dev); +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/765-2-net-next-net-dsa-merge-rtnl_lock-sections-in-dsa_slave_create.patch b/target/linux/generic/backport-5.15/765-2-net-next-net-dsa-merge-rtnl_lock-sections-in-dsa_slave_create.patch new file mode 100644 index 0000000000..c383bd93fb --- /dev/null +++ b/target/linux/generic/backport-5.15/765-2-net-next-net-dsa-merge-rtnl_lock-sections-in-dsa_slave_create.patch @@ -0,0 +1,39 @@ +From e31dbd3b6aba585231cd84a87adeb22e7c6a8c19 Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Thu, 6 Jan 2022 01:11:13 +0200 +Subject: [PATCH 2/6] net: dsa: merge rtnl_lock sections in dsa_slave_create + +Currently dsa_slave_create() has two sequences of rtnl_lock/rtnl_unlock +in a row. Remove the rtnl_unlock() and rtnl_lock() in between, such that +the operation can execute slighly faster. + +Signed-off-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + net/dsa/slave.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +diff --git a/net/dsa/slave.c b/net/dsa/slave.c +index 88bcdba92fa7..22241afcac81 100644 +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -2022,14 +2022,12 @@ int dsa_slave_create(struct dsa_port *port) + } + + rtnl_lock(); ++ + ret = dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN); +- rtnl_unlock(); + if (ret && ret != -EOPNOTSUPP) + dev_warn(ds->dev, "nonfatal error %d setting MTU to %d on port %d\n", + ret, ETH_DATA_LEN, port->index); + +- rtnl_lock(); +- + ret = register_netdevice(slave_dev); + if (ret) { + netdev_err(master, "error %d registering interface %s\n", +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/765-3-net-next-net-dsa-stop-updating-master-MTU-from-master.c.patch b/target/linux/generic/backport-5.15/765-3-net-next-net-dsa-stop-updating-master-MTU-from-master.c.patch new file mode 100644 index 0000000000..c81bedaaf8 --- /dev/null +++ b/target/linux/generic/backport-5.15/765-3-net-next-net-dsa-stop-updating-master-MTU-from-master.c.patch @@ -0,0 +1,96 @@ +From a1ff94c2973c43bc1e2677ac63ebb15b1d1ff846 Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Thu, 6 Jan 2022 01:11:14 +0200 +Subject: [PATCH 3/6] net: dsa: stop updating master MTU from master.c + +At present there are two paths for changing the MTU of the DSA master. + +The first is: + +dsa_tree_setup +-> dsa_tree_setup_ports + -> dsa_port_setup + -> dsa_slave_create + -> dsa_slave_change_mtu + -> dev_set_mtu(master) + +The second is: + +dsa_tree_setup +-> dsa_tree_setup_master + -> dsa_master_setup + -> dev_set_mtu(dev) + +So the dev_set_mtu() call from dsa_master_setup() has been effectively +superseded by the dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN) that is +done from dsa_slave_create() for each user port. The later function also +updates the master MTU according to the largest user port MTU from the +tree. Therefore, updating the master MTU through a separate code path +isn't needed. + +Signed-off-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + net/dsa/master.c | 25 +------------------------ + 1 file changed, 1 insertion(+), 24 deletions(-) + +diff --git a/net/dsa/master.c b/net/dsa/master.c +index e8e19857621b..f4efb244f91d 100644 +--- a/net/dsa/master.c ++++ b/net/dsa/master.c +@@ -330,28 +330,13 @@ static const struct attribute_group dsa_group = { + .attrs = dsa_slave_attrs, + }; + +-static void dsa_master_reset_mtu(struct net_device *dev) +-{ +- int err; +- +- rtnl_lock(); +- err = dev_set_mtu(dev, ETH_DATA_LEN); +- if (err) +- netdev_dbg(dev, +- "Unable to reset MTU to exclude DSA overheads\n"); +- rtnl_unlock(); +-} +- + static struct lock_class_key dsa_master_addr_list_lock_key; + + int dsa_master_setup(struct net_device *dev, struct dsa_port *cpu_dp) + { +- const struct dsa_device_ops *tag_ops = cpu_dp->tag_ops; + struct dsa_switch *ds = cpu_dp->ds; + struct device_link *consumer_link; +- int mtu, ret; +- +- mtu = ETH_DATA_LEN + dsa_tag_protocol_overhead(tag_ops); ++ int ret; + + /* The DSA master must use SET_NETDEV_DEV for this to work. */ + consumer_link = device_link_add(ds->dev, dev->dev.parent, +@@ -361,13 +346,6 @@ int dsa_master_setup(struct net_device *dev, struct dsa_port *cpu_dp) + "Failed to create a device link to DSA switch %s\n", + dev_name(ds->dev)); + +- rtnl_lock(); +- ret = dev_set_mtu(dev, mtu); +- rtnl_unlock(); +- if (ret) +- netdev_warn(dev, "error %d setting MTU to %d to include DSA overhead\n", +- ret, mtu); +- + /* If we use a tagging format that doesn't have an ethertype + * field, make sure that all packets from this point on get + * sent to the tag format's receive function. +@@ -405,7 +383,6 @@ void dsa_master_teardown(struct net_device *dev) + sysfs_remove_group(&dev->dev.kobj, &dsa_group); + dsa_netdev_ops_set(dev, NULL); + dsa_master_ethtool_teardown(dev); +- dsa_master_reset_mtu(dev); + dsa_master_set_promiscuity(dev, -1); + + dev->dsa_ptr = NULL; +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/765-4-net-next-net-dsa-hold-rtnl_mutex-when-calling-dsa_master_-set.patch b/target/linux/generic/backport-5.15/765-4-net-next-net-dsa-hold-rtnl_mutex-when-calling-dsa_master_-set.patch new file mode 100644 index 0000000000..cbbe52b0cc --- /dev/null +++ b/target/linux/generic/backport-5.15/765-4-net-next-net-dsa-hold-rtnl_mutex-when-calling-dsa_master_-set.patch @@ -0,0 +1,85 @@ +From c146f9bc195a9dc3ad7fd000a14540e7c9df952d Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Thu, 6 Jan 2022 01:11:15 +0200 +Subject: [PATCH 4/6] net: dsa: hold rtnl_mutex when calling + dsa_master_{setup,teardown} + +DSA needs to simulate master tracking events when a binding is first +with a DSA master established and torn down, in order to give drivers +the simplifying guarantee that ->master_state_change calls are made +only when the master's readiness state to pass traffic changes. +master_state_change() provide a operational bool that DSA driver can use +to understand if DSA master is operational or not. +To avoid races, we need to block the reception of +NETDEV_UP/NETDEV_CHANGE/NETDEV_GOING_DOWN events in the netdev notifier +chain while we are changing the master's dev->dsa_ptr (this changes what +netdev_uses_dsa(dev) reports). + +The dsa_master_setup() and dsa_master_teardown() functions optionally +require the rtnl_mutex to be held, if the tagger needs the master to be +promiscuous, these functions call dev_set_promiscuity(). Move the +rtnl_lock() from that function and make it top-level. + +Signed-off-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + net/dsa/dsa2.c | 8 ++++++++ + net/dsa/master.c | 4 ++-- + 2 files changed, 10 insertions(+), 2 deletions(-) + +diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c +index a0d84f9f864f..52fb1958b535 100644 +--- a/net/dsa/dsa2.c ++++ b/net/dsa/dsa2.c +@@ -1038,6 +1038,8 @@ static int dsa_tree_setup_master(struct dsa_switch_tree *dst) + struct dsa_port *dp; + int err; + ++ rtnl_lock(); ++ + list_for_each_entry(dp, &dst->ports, list) { + if (dsa_port_is_cpu(dp)) { + err = dsa_master_setup(dp->master, dp); +@@ -1046,6 +1048,8 @@ static int dsa_tree_setup_master(struct dsa_switch_tree *dst) + } + } + ++ rtnl_unlock(); ++ + return 0; + } + +@@ -1053,9 +1057,13 @@ static void dsa_tree_teardown_master(struct dsa_switch_tree *dst) + { + struct dsa_port *dp; + ++ rtnl_lock(); ++ + list_for_each_entry(dp, &dst->ports, list) + if (dsa_port_is_cpu(dp)) + dsa_master_teardown(dp->master); ++ ++ rtnl_unlock(); + } + + static int dsa_tree_setup_lags(struct dsa_switch_tree *dst) +diff --git a/net/dsa/master.c b/net/dsa/master.c +index f4efb244f91d..2199104ca7df 100644 +--- a/net/dsa/master.c ++++ b/net/dsa/master.c +@@ -267,9 +267,9 @@ static void dsa_master_set_promiscuity(struct net_device *dev, int inc) + if (!ops->promisc_on_master) + return; + +- rtnl_lock(); ++ ASSERT_RTNL(); ++ + dev_set_promiscuity(dev, inc); +- rtnl_unlock(); + } + + static ssize_t tagging_show(struct device *d, struct device_attribute *attr, +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/765-5-net-next-net-dsa-first-set-up-shared-ports-then-non-shared-po.patch b/target/linux/generic/backport-5.15/765-5-net-next-net-dsa-first-set-up-shared-ports-then-non-shared-po.patch new file mode 100644 index 0000000000..fbd63a5743 --- /dev/null +++ b/target/linux/generic/backport-5.15/765-5-net-next-net-dsa-first-set-up-shared-ports-then-non-shared-po.patch @@ -0,0 +1,123 @@ +From 1e3f407f3cacc5dcfe27166c412ed9bc263d82bf Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Thu, 6 Jan 2022 01:11:16 +0200 +Subject: [PATCH 5/6] net: dsa: first set up shared ports, then non-shared + ports + +After commit a57d8c217aad ("net: dsa: flush switchdev workqueue before +tearing down CPU/DSA ports"), the port setup and teardown procedure +became asymmetric. + +The fact of the matter is that user ports need the shared ports to be up +before they can be used for CPU-initiated termination. And since we +register net devices for the user ports, those won't be functional until +we also call the setup for the shared (CPU, DSA) ports. But we may do +that later, depending on the port numbering scheme of the hardware we +are dealing with. + +It just makes sense that all shared ports are brought up before any user +port is. I can't pinpoint any issue due to the current behavior, but +let's change it nonetheless, for consistency's sake. + +Signed-off-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + net/dsa/dsa2.c | 50 +++++++++++++++++++++++++++++++++++++------------- + 1 file changed, 37 insertions(+), 13 deletions(-) + +diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c +index 52fb1958b535..ea0f02a24b8b 100644 +--- a/net/dsa/dsa2.c ++++ b/net/dsa/dsa2.c +@@ -1003,23 +1003,28 @@ static void dsa_tree_teardown_switches(struct dsa_switch_tree *dst) + dsa_switch_teardown(dp->ds); + } + +-static int dsa_tree_setup_switches(struct dsa_switch_tree *dst) ++/* Bring shared ports up first, then non-shared ports */ ++static int dsa_tree_setup_ports(struct dsa_switch_tree *dst) + { + struct dsa_port *dp; +- int err; ++ int err = 0; + + list_for_each_entry(dp, &dst->ports, list) { +- err = dsa_switch_setup(dp->ds); +- if (err) +- goto teardown; ++ if (dsa_port_is_dsa(dp) || dsa_port_is_cpu(dp)) { ++ err = dsa_port_setup(dp); ++ if (err) ++ goto teardown; ++ } + } + + list_for_each_entry(dp, &dst->ports, list) { +- err = dsa_port_setup(dp); +- if (err) { +- err = dsa_port_reinit_as_unused(dp); +- if (err) +- goto teardown; ++ if (dsa_port_is_user(dp) || dsa_port_is_unused(dp)) { ++ err = dsa_port_setup(dp); ++ if (err) { ++ err = dsa_port_reinit_as_unused(dp); ++ if (err) ++ goto teardown; ++ } + } + } + +@@ -1028,7 +1033,21 @@ static int dsa_tree_setup_switches(struct dsa_switch_tree *dst) + teardown: + dsa_tree_teardown_ports(dst); + +- dsa_tree_teardown_switches(dst); ++ return err; ++} ++ ++static int dsa_tree_setup_switches(struct dsa_switch_tree *dst) ++{ ++ struct dsa_port *dp; ++ int err = 0; ++ ++ list_for_each_entry(dp, &dst->ports, list) { ++ err = dsa_switch_setup(dp->ds); ++ if (err) { ++ dsa_tree_teardown_switches(dst); ++ break; ++ } ++ } + + return err; + } +@@ -1115,10 +1134,14 @@ static int dsa_tree_setup(struct dsa_switch_tree *dst) + if (err) + goto teardown_cpu_ports; + +- err = dsa_tree_setup_master(dst); ++ err = dsa_tree_setup_ports(dst); + if (err) + goto teardown_switches; + ++ err = dsa_tree_setup_master(dst); ++ if (err) ++ goto teardown_ports; ++ + err = dsa_tree_setup_lags(dst); + if (err) + goto teardown_master; +@@ -1131,8 +1154,9 @@ static int dsa_tree_setup(struct dsa_switch_tree *dst) + + teardown_master: + dsa_tree_teardown_master(dst); +-teardown_switches: ++teardown_ports: + dsa_tree_teardown_ports(dst); ++teardown_switches: + dsa_tree_teardown_switches(dst); + teardown_cpu_ports: + dsa_tree_teardown_cpu_ports(dst); +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/765-6-net-next-net-dsa-setup-master-before-ports.patch b/target/linux/generic/backport-5.15/765-6-net-next-net-dsa-setup-master-before-ports.patch new file mode 100644 index 0000000000..3f5b71945b --- /dev/null +++ b/target/linux/generic/backport-5.15/765-6-net-next-net-dsa-setup-master-before-ports.patch @@ -0,0 +1,120 @@ +From 11fd667dac315ea3f2469961f6d2869271a46cae Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Thu, 6 Jan 2022 01:11:17 +0200 +Subject: [PATCH 6/6] net: dsa: setup master before ports + +It is said that as soon as a network interface is registered, all its +resources should have already been prepared, so that it is available for +sending and receiving traffic. One of the resources needed by a DSA +slave interface is the master. + +dsa_tree_setup +-> dsa_tree_setup_ports + -> dsa_port_setup + -> dsa_slave_create + -> register_netdevice +-> dsa_tree_setup_master + -> dsa_master_setup + -> sets up master->dsa_ptr, which enables reception + +Therefore, there is a short period of time after register_netdevice() +during which the master isn't prepared to pass traffic to the DSA layer +(master->dsa_ptr is checked by eth_type_trans). Same thing during +unregistration, there is a time frame in which packets might be missed. + +Note that this change opens us to another race: dsa_master_find_slave() +will get invoked potentially earlier than the slave creation, and later +than the slave deletion. Since dp->slave starts off as a NULL pointer, +the earlier calls aren't a problem, but the later calls are. To avoid +use-after-free, we should zeroize dp->slave before calling +dsa_slave_destroy(). + +In practice I cannot really test real life improvements brought by this +change, since in my systems, netdevice creation races with PHY autoneg +which takes a few seconds to complete, and that masks quite a few races. +Effects might be noticeable in a setup with fixed links all the way to +an external system. + +Signed-off-by: Vladimir Oltean +Signed-off-by: David S. Miller +--- + net/dsa/dsa2.c | 23 +++++++++++++---------- + 1 file changed, 13 insertions(+), 10 deletions(-) + +diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c +index ea0f02a24b8b..3d21521453fe 100644 +--- a/net/dsa/dsa2.c ++++ b/net/dsa/dsa2.c +@@ -561,6 +561,7 @@ static void dsa_port_teardown(struct dsa_port *dp) + struct devlink_port *dlp = &dp->devlink_port; + struct dsa_switch *ds = dp->ds; + struct dsa_mac_addr *a, *tmp; ++ struct net_device *slave; + + if (!dp->setup) + return; +@@ -582,9 +583,11 @@ static void dsa_port_teardown(struct dsa_port *dp) + dsa_port_link_unregister_of(dp); + break; + case DSA_PORT_TYPE_USER: +- if (dp->slave) { +- dsa_slave_destroy(dp->slave); ++ slave = dp->slave; ++ ++ if (slave) { + dp->slave = NULL; ++ dsa_slave_destroy(slave); + } + break; + } +@@ -1134,17 +1137,17 @@ static int dsa_tree_setup(struct dsa_switch_tree *dst) + if (err) + goto teardown_cpu_ports; + +- err = dsa_tree_setup_ports(dst); ++ err = dsa_tree_setup_master(dst); + if (err) + goto teardown_switches; + +- err = dsa_tree_setup_master(dst); ++ err = dsa_tree_setup_ports(dst); + if (err) +- goto teardown_ports; ++ goto teardown_master; + + err = dsa_tree_setup_lags(dst); + if (err) +- goto teardown_master; ++ goto teardown_ports; + + dst->setup = true; + +@@ -1152,10 +1155,10 @@ static int dsa_tree_setup(struct dsa_switch_tree *dst) + + return 0; + +-teardown_master: +- dsa_tree_teardown_master(dst); + teardown_ports: + dsa_tree_teardown_ports(dst); ++teardown_master: ++ dsa_tree_teardown_master(dst); + teardown_switches: + dsa_tree_teardown_switches(dst); + teardown_cpu_ports: +@@ -1173,10 +1176,10 @@ static void dsa_tree_teardown(struct dsa_switch_tree *dst) + + dsa_tree_teardown_lags(dst); + +- dsa_tree_teardown_master(dst); +- + dsa_tree_teardown_ports(dst); + ++ dsa_tree_teardown_master(dst); ++ + dsa_tree_teardown_switches(dst); + + dsa_tree_teardown_cpu_ports(dst); +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-01-net-dsa-provide-switch-operations-for-tracking-the-m.patch b/target/linux/generic/backport-5.15/766-01-net-dsa-provide-switch-operations-for-tracking-the-m.patch new file mode 100644 index 0000000000..2cfb488aee --- /dev/null +++ b/target/linux/generic/backport-5.15/766-01-net-dsa-provide-switch-operations-for-tracking-the-m.patch @@ -0,0 +1,267 @@ +From 295ab96f478d0fa56393e85406f19a867e26ce22 Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Wed, 2 Feb 2022 01:03:20 +0100 +Subject: [PATCH 01/16] net: dsa: provide switch operations for tracking the + master state + +Certain drivers may need to send management traffic to the switch for +things like register access, FDB dump, etc, to accelerate what their +slow bus (SPI, I2C, MDIO) can already do. + +Ethernet is faster (especially in bulk transactions) but is also more +unreliable, since the user may decide to bring the DSA master down (or +not bring it up), therefore severing the link between the host and the +attached switch. + +Drivers needing Ethernet-based register access already should have +fallback logic to the slow bus if the Ethernet method fails, but that +fallback may be based on a timeout, and the I/O to the switch may slow +down to a halt if the master is down, because every Ethernet packet will +have to time out. The driver also doesn't have the option to turn off +Ethernet-based I/O momentarily, because it wouldn't know when to turn it +back on. + +Which is where this change comes in. By tracking NETDEV_CHANGE, +NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know +the exact interval of time during which this interface is reliably +available for traffic. Provide this information to switches so they can +use it as they wish. + +An helper is added dsa_port_master_is_operational() to check if a master +port is operational. + +Signed-off-by: Vladimir Oltean +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + include/net/dsa.h | 17 +++++++++++++++++ + net/dsa/dsa2.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ + net/dsa/dsa_priv.h | 13 +++++++++++++ + net/dsa/slave.c | 32 ++++++++++++++++++++++++++++++++ + net/dsa/switch.c | 15 +++++++++++++++ + 5 files changed, 123 insertions(+) + +diff --git a/include/net/dsa.h b/include/net/dsa.h +index 57b3e4e7413b..43c4153ef53a 100644 +--- a/include/net/dsa.h ++++ b/include/net/dsa.h +@@ -278,6 +278,10 @@ struct dsa_port { + struct list_head mdbs; + + bool setup; ++ /* Master state bits, valid only on CPU ports */ ++ u8 master_admin_up:1; ++ u8 master_oper_up:1; ++ + }; + + /* TODO: ideally DSA ports would have a single dp->link_dp member, +@@ -478,6 +482,12 @@ static inline bool dsa_port_is_unused(struct dsa_port *dp) + return dp->type == DSA_PORT_TYPE_UNUSED; + } + ++static inline bool dsa_port_master_is_operational(struct dsa_port *dp) ++{ ++ return dsa_port_is_cpu(dp) && dp->master_admin_up && ++ dp->master_oper_up; ++} ++ + static inline bool dsa_is_unused_port(struct dsa_switch *ds, int p) + { + return dsa_to_port(ds, p)->type == DSA_PORT_TYPE_UNUSED; +@@ -1036,6 +1046,13 @@ struct dsa_switch_ops { + int (*tag_8021q_vlan_add)(struct dsa_switch *ds, int port, u16 vid, + u16 flags); + int (*tag_8021q_vlan_del)(struct dsa_switch *ds, int port, u16 vid); ++ ++ /* ++ * DSA master tracking operations ++ */ ++ void (*master_state_change)(struct dsa_switch *ds, ++ const struct net_device *master, ++ bool operational); + }; + + #define DSA_DEVLINK_PARAM_DRIVER(_id, _name, _type, _cmodes) \ +diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c +index 3d21521453fe..ff998c0ede02 100644 +--- a/net/dsa/dsa2.c ++++ b/net/dsa/dsa2.c +@@ -1279,6 +1279,52 @@ int dsa_tree_change_tag_proto(struct dsa_switch_tree *dst, + return err; + } + ++static void dsa_tree_master_state_change(struct dsa_switch_tree *dst, ++ struct net_device *master) ++{ ++ struct dsa_notifier_master_state_info info; ++ struct dsa_port *cpu_dp = master->dsa_ptr; ++ ++ info.master = master; ++ info.operational = dsa_port_master_is_operational(cpu_dp); ++ ++ dsa_tree_notify(dst, DSA_NOTIFIER_MASTER_STATE_CHANGE, &info); ++} ++ ++void dsa_tree_master_admin_state_change(struct dsa_switch_tree *dst, ++ struct net_device *master, ++ bool up) ++{ ++ struct dsa_port *cpu_dp = master->dsa_ptr; ++ bool notify = false; ++ ++ if ((dsa_port_master_is_operational(cpu_dp)) != ++ (up && cpu_dp->master_oper_up)) ++ notify = true; ++ ++ cpu_dp->master_admin_up = up; ++ ++ if (notify) ++ dsa_tree_master_state_change(dst, master); ++} ++ ++void dsa_tree_master_oper_state_change(struct dsa_switch_tree *dst, ++ struct net_device *master, ++ bool up) ++{ ++ struct dsa_port *cpu_dp = master->dsa_ptr; ++ bool notify = false; ++ ++ if ((dsa_port_master_is_operational(cpu_dp)) != ++ (cpu_dp->master_admin_up && up)) ++ notify = true; ++ ++ cpu_dp->master_oper_up = up; ++ ++ if (notify) ++ dsa_tree_master_state_change(dst, master); ++} ++ + static struct dsa_port *dsa_port_touch(struct dsa_switch *ds, int index) + { + struct dsa_switch_tree *dst = ds->dst; +diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h +index 760306f0012f..2bbfa9efe9f8 100644 +--- a/net/dsa/dsa_priv.h ++++ b/net/dsa/dsa_priv.h +@@ -40,6 +40,7 @@ enum { + DSA_NOTIFIER_TAG_PROTO_DISCONNECT, + DSA_NOTIFIER_TAG_8021Q_VLAN_ADD, + DSA_NOTIFIER_TAG_8021Q_VLAN_DEL, ++ DSA_NOTIFIER_MASTER_STATE_CHANGE, + }; + + /* DSA_NOTIFIER_AGEING_TIME */ +@@ -109,6 +110,12 @@ struct dsa_notifier_tag_8021q_vlan_info { + u16 vid; + }; + ++/* DSA_NOTIFIER_MASTER_STATE_CHANGE */ ++struct dsa_notifier_master_state_info { ++ const struct net_device *master; ++ bool operational; ++}; ++ + struct dsa_switchdev_event_work { + struct dsa_switch *ds; + int port; +@@ -482,6 +489,12 @@ int dsa_tree_change_tag_proto(struct dsa_switch_tree *dst, + struct net_device *master, + const struct dsa_device_ops *tag_ops, + const struct dsa_device_ops *old_tag_ops); ++void dsa_tree_master_admin_state_change(struct dsa_switch_tree *dst, ++ struct net_device *master, ++ bool up); ++void dsa_tree_master_oper_state_change(struct dsa_switch_tree *dst, ++ struct net_device *master, ++ bool up); + int dsa_bridge_num_get(const struct net_device *bridge_dev, int max); + void dsa_bridge_num_put(const struct net_device *bridge_dev, int bridge_num); + +diff --git a/net/dsa/slave.c b/net/dsa/slave.c +index 22241afcac81..2b5b0f294233 100644 +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -2346,6 +2346,36 @@ static int dsa_slave_netdevice_event(struct notifier_block *nb, + err = dsa_port_lag_change(dp, info->lower_state_info); + return notifier_from_errno(err); + } ++ case NETDEV_CHANGE: ++ case NETDEV_UP: { ++ /* Track state of master port. ++ * DSA driver may require the master port (and indirectly ++ * the tagger) to be available for some special operation. ++ */ ++ if (netdev_uses_dsa(dev)) { ++ struct dsa_port *cpu_dp = dev->dsa_ptr; ++ struct dsa_switch_tree *dst = cpu_dp->ds->dst; ++ ++ /* Track when the master port is UP */ ++ dsa_tree_master_oper_state_change(dst, dev, ++ netif_oper_up(dev)); ++ ++ /* Track when the master port is ready and can accept ++ * packet. ++ * NETDEV_UP event is not enough to flag a port as ready. ++ * We also have to wait for linkwatch_do_dev to dev_activate ++ * and emit a NETDEV_CHANGE event. ++ * We check if a master port is ready by checking if the dev ++ * have a qdisc assigned and is not noop. ++ */ ++ dsa_tree_master_admin_state_change(dst, dev, ++ !qdisc_tx_is_noop(dev)); ++ ++ return NOTIFY_OK; ++ } ++ ++ return NOTIFY_DONE; ++ } + case NETDEV_GOING_DOWN: { + struct dsa_port *dp, *cpu_dp; + struct dsa_switch_tree *dst; +@@ -2357,6 +2387,8 @@ static int dsa_slave_netdevice_event(struct notifier_block *nb, + cpu_dp = dev->dsa_ptr; + dst = cpu_dp->ds->dst; + ++ dsa_tree_master_admin_state_change(dst, dev, false); ++ + list_for_each_entry(dp, &dst->ports, list) { + if (!dsa_port_is_user(dp)) + continue; +diff --git a/net/dsa/switch.c b/net/dsa/switch.c +index 517cc83d13cc..4866b58649e4 100644 +--- a/net/dsa/switch.c ++++ b/net/dsa/switch.c +@@ -697,6 +697,18 @@ dsa_switch_disconnect_tag_proto(struct dsa_switch *ds, + return 0; + } + ++static int ++dsa_switch_master_state_change(struct dsa_switch *ds, ++ struct dsa_notifier_master_state_info *info) ++{ ++ if (!ds->ops->master_state_change) ++ return 0; ++ ++ ds->ops->master_state_change(ds, info->master, info->operational); ++ ++ return 0; ++} ++ + static int dsa_switch_event(struct notifier_block *nb, + unsigned long event, void *info) + { +@@ -770,6 +782,9 @@ static int dsa_switch_event(struct notifier_block *nb, + case DSA_NOTIFIER_TAG_8021Q_VLAN_DEL: + err = dsa_switch_tag_8021q_vlan_del(ds, info); + break; ++ case DSA_NOTIFIER_MASTER_STATE_CHANGE: ++ err = dsa_switch_master_state_change(ds, info); ++ break; + default: + err = -EOPNOTSUPP; + break; +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-02-net-dsa-replay-master-state-events-in-dsa_tree_-setu.patch b/target/linux/generic/backport-5.15/766-02-net-dsa-replay-master-state-events-in-dsa_tree_-setu.patch new file mode 100644 index 0000000000..d9356c3b7d --- /dev/null +++ b/target/linux/generic/backport-5.15/766-02-net-dsa-replay-master-state-events-in-dsa_tree_-setu.patch @@ -0,0 +1,94 @@ +From e83d56537859849f2223b90749e554831b1f3c27 Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Wed, 2 Feb 2022 01:03:21 +0100 +Subject: [PATCH 02/16] net: dsa: replay master state events in + dsa_tree_{setup,teardown}_master + +In order for switch driver to be able to make simple and reliable use of +the master tracking operations, they must also be notified of the +initial state of the DSA master, not just of the changes. This is +because they might enable certain features only during the time when +they know that the DSA master is up and running. + +Therefore, this change explicitly checks the state of the DSA master +under the same rtnl_mutex as we were holding during the +dsa_master_setup() and dsa_master_teardown() call. The idea being that +if the DSA master became operational in between the moment in which it +became a DSA master (dsa_master_setup set dev->dsa_ptr) and the moment +when we checked for the master being up, there is a chance that we +would emit a ->master_state_change() call with no actual state change. +We need to avoid that by serializing the concurrent netdevice event with +us. If the netdevice event started before, we force it to finish before +we begin, because we take rtnl_lock before making netdev_uses_dsa() +return true. So we also handle that early event and do nothing on it. +Similarly, if the dev_open() attempt is concurrent with us, it will +attempt to take the rtnl_mutex, but we're holding it. We'll see that +the master flag IFF_UP isn't set, then when we release the rtnl_mutex +we'll process the NETDEV_UP notifier. + +Signed-off-by: Vladimir Oltean +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + net/dsa/dsa2.c | 28 ++++++++++++++++++++++++---- + 1 file changed, 24 insertions(+), 4 deletions(-) + +diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c +index ff998c0ede02..909b045c9b11 100644 +--- a/net/dsa/dsa2.c ++++ b/net/dsa/dsa2.c +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + + #include "dsa_priv.h" + +@@ -1064,9 +1065,18 @@ static int dsa_tree_setup_master(struct dsa_switch_tree *dst) + + list_for_each_entry(dp, &dst->ports, list) { + if (dsa_port_is_cpu(dp)) { +- err = dsa_master_setup(dp->master, dp); ++ struct net_device *master = dp->master; ++ bool admin_up = (master->flags & IFF_UP) && ++ !qdisc_tx_is_noop(master); ++ ++ err = dsa_master_setup(master, dp); + if (err) + return err; ++ ++ /* Replay master state event */ ++ dsa_tree_master_admin_state_change(dst, master, admin_up); ++ dsa_tree_master_oper_state_change(dst, master, ++ netif_oper_up(master)); + } + } + +@@ -1081,9 +1091,19 @@ static void dsa_tree_teardown_master(struct dsa_switch_tree *dst) + + rtnl_lock(); + +- list_for_each_entry(dp, &dst->ports, list) +- if (dsa_port_is_cpu(dp)) +- dsa_master_teardown(dp->master); ++ list_for_each_entry(dp, &dst->ports, list) { ++ if (dsa_port_is_cpu(dp)) { ++ struct net_device *master = dp->master; ++ ++ /* Synthesizing an "admin down" state is sufficient for ++ * the switches to get a notification if the master is ++ * currently up and running. ++ */ ++ dsa_tree_master_admin_state_change(dst, master, false); ++ ++ dsa_master_teardown(master); ++ } ++ } + + rtnl_unlock(); + } +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-03-net-dsa-tag_qca-convert-to-FIELD-macro.patch b/target/linux/generic/backport-5.15/766-03-net-dsa-tag_qca-convert-to-FIELD-macro.patch new file mode 100644 index 0000000000..84fd918cb3 --- /dev/null +++ b/target/linux/generic/backport-5.15/766-03-net-dsa-tag_qca-convert-to-FIELD-macro.patch @@ -0,0 +1,92 @@ +From 6b0458299297ca4ab6fb295800e29a4e501d50c1 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:22 +0100 +Subject: [PATCH 03/16] net: dsa: tag_qca: convert to FIELD macro + +Convert driver to FIELD macro to drop redundant define. + +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + net/dsa/tag_qca.c | 34 +++++++++++++++------------------- + 1 file changed, 15 insertions(+), 19 deletions(-) + +diff --git a/net/dsa/tag_qca.c b/net/dsa/tag_qca.c +index 1ea9401b8ace..55fa6b96b4eb 100644 +--- a/net/dsa/tag_qca.c ++++ b/net/dsa/tag_qca.c +@@ -4,29 +4,24 @@ + */ + + #include ++#include + + #include "dsa_priv.h" + + #define QCA_HDR_LEN 2 + #define QCA_HDR_VERSION 0x2 + +-#define QCA_HDR_RECV_VERSION_MASK GENMASK(15, 14) +-#define QCA_HDR_RECV_VERSION_S 14 +-#define QCA_HDR_RECV_PRIORITY_MASK GENMASK(13, 11) +-#define QCA_HDR_RECV_PRIORITY_S 11 +-#define QCA_HDR_RECV_TYPE_MASK GENMASK(10, 6) +-#define QCA_HDR_RECV_TYPE_S 6 ++#define QCA_HDR_RECV_VERSION GENMASK(15, 14) ++#define QCA_HDR_RECV_PRIORITY GENMASK(13, 11) ++#define QCA_HDR_RECV_TYPE GENMASK(10, 6) + #define QCA_HDR_RECV_FRAME_IS_TAGGED BIT(3) +-#define QCA_HDR_RECV_SOURCE_PORT_MASK GENMASK(2, 0) +- +-#define QCA_HDR_XMIT_VERSION_MASK GENMASK(15, 14) +-#define QCA_HDR_XMIT_VERSION_S 14 +-#define QCA_HDR_XMIT_PRIORITY_MASK GENMASK(13, 11) +-#define QCA_HDR_XMIT_PRIORITY_S 11 +-#define QCA_HDR_XMIT_CONTROL_MASK GENMASK(10, 8) +-#define QCA_HDR_XMIT_CONTROL_S 8 ++#define QCA_HDR_RECV_SOURCE_PORT GENMASK(2, 0) ++ ++#define QCA_HDR_XMIT_VERSION GENMASK(15, 14) ++#define QCA_HDR_XMIT_PRIORITY GENMASK(13, 11) ++#define QCA_HDR_XMIT_CONTROL GENMASK(10, 8) + #define QCA_HDR_XMIT_FROM_CPU BIT(7) +-#define QCA_HDR_XMIT_DP_BIT_MASK GENMASK(6, 0) ++#define QCA_HDR_XMIT_DP_BIT GENMASK(6, 0) + + static struct sk_buff *qca_tag_xmit(struct sk_buff *skb, struct net_device *dev) + { +@@ -40,8 +35,9 @@ static struct sk_buff *qca_tag_xmit(struct sk_buff *skb, struct net_device *dev) + phdr = dsa_etype_header_pos_tx(skb); + + /* Set the version field, and set destination port information */ +- hdr = QCA_HDR_VERSION << QCA_HDR_XMIT_VERSION_S | +- QCA_HDR_XMIT_FROM_CPU | BIT(dp->index); ++ hdr = FIELD_PREP(QCA_HDR_XMIT_VERSION, QCA_HDR_VERSION); ++ hdr |= QCA_HDR_XMIT_FROM_CPU; ++ hdr |= FIELD_PREP(QCA_HDR_XMIT_DP_BIT, BIT(dp->index)); + + *phdr = htons(hdr); + +@@ -62,7 +58,7 @@ static struct sk_buff *qca_tag_rcv(struct sk_buff *skb, struct net_device *dev) + hdr = ntohs(*phdr); + + /* Make sure the version is correct */ +- ver = (hdr & QCA_HDR_RECV_VERSION_MASK) >> QCA_HDR_RECV_VERSION_S; ++ ver = FIELD_GET(QCA_HDR_RECV_VERSION, hdr); + if (unlikely(ver != QCA_HDR_VERSION)) + return NULL; + +@@ -71,7 +67,7 @@ static struct sk_buff *qca_tag_rcv(struct sk_buff *skb, struct net_device *dev) + dsa_strip_etype_header(skb, QCA_HDR_LEN); + + /* Get source port information */ +- port = (hdr & QCA_HDR_RECV_SOURCE_PORT_MASK); ++ port = FIELD_GET(QCA_HDR_RECV_SOURCE_PORT, hdr); + + skb->dev = dsa_master_find_slave(dev, 0, port); + if (!skb->dev) +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-04-net-dsa-tag_qca-move-define-to-include-linux-dsa.patch b/target/linux/generic/backport-5.15/766-04-net-dsa-tag_qca-move-define-to-include-linux-dsa.patch new file mode 100644 index 0000000000..21221dbbef --- /dev/null +++ b/target/linux/generic/backport-5.15/766-04-net-dsa-tag_qca-move-define-to-include-linux-dsa.patch @@ -0,0 +1,79 @@ +From 3ec762fb13c7e7273800b94c80db1c2cc37590d1 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:23 +0100 +Subject: [PATCH 04/16] net: dsa: tag_qca: move define to include linux/dsa + +Move tag_qca define to include dir linux/dsa as the qca8k require access +to the tagger define to support in-band mdio read/write using ethernet +packet. + +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + include/linux/dsa/tag_qca.h | 21 +++++++++++++++++++++ + net/dsa/tag_qca.c | 16 +--------------- + 2 files changed, 22 insertions(+), 15 deletions(-) + create mode 100644 include/linux/dsa/tag_qca.h + +diff --git a/include/linux/dsa/tag_qca.h b/include/linux/dsa/tag_qca.h +new file mode 100644 +index 000000000000..c02d2d39ff4a +--- /dev/null ++++ b/include/linux/dsa/tag_qca.h +@@ -0,0 +1,21 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++ ++#ifndef __TAG_QCA_H ++#define __TAG_QCA_H ++ ++#define QCA_HDR_LEN 2 ++#define QCA_HDR_VERSION 0x2 ++ ++#define QCA_HDR_RECV_VERSION GENMASK(15, 14) ++#define QCA_HDR_RECV_PRIORITY GENMASK(13, 11) ++#define QCA_HDR_RECV_TYPE GENMASK(10, 6) ++#define QCA_HDR_RECV_FRAME_IS_TAGGED BIT(3) ++#define QCA_HDR_RECV_SOURCE_PORT GENMASK(2, 0) ++ ++#define QCA_HDR_XMIT_VERSION GENMASK(15, 14) ++#define QCA_HDR_XMIT_PRIORITY GENMASK(13, 11) ++#define QCA_HDR_XMIT_CONTROL GENMASK(10, 8) ++#define QCA_HDR_XMIT_FROM_CPU BIT(7) ++#define QCA_HDR_XMIT_DP_BIT GENMASK(6, 0) ++ ++#endif /* __TAG_QCA_H */ +diff --git a/net/dsa/tag_qca.c b/net/dsa/tag_qca.c +index 55fa6b96b4eb..34e565e00ece 100644 +--- a/net/dsa/tag_qca.c ++++ b/net/dsa/tag_qca.c +@@ -5,24 +5,10 @@ + + #include + #include ++#include + + #include "dsa_priv.h" + +-#define QCA_HDR_LEN 2 +-#define QCA_HDR_VERSION 0x2 +- +-#define QCA_HDR_RECV_VERSION GENMASK(15, 14) +-#define QCA_HDR_RECV_PRIORITY GENMASK(13, 11) +-#define QCA_HDR_RECV_TYPE GENMASK(10, 6) +-#define QCA_HDR_RECV_FRAME_IS_TAGGED BIT(3) +-#define QCA_HDR_RECV_SOURCE_PORT GENMASK(2, 0) +- +-#define QCA_HDR_XMIT_VERSION GENMASK(15, 14) +-#define QCA_HDR_XMIT_PRIORITY GENMASK(13, 11) +-#define QCA_HDR_XMIT_CONTROL GENMASK(10, 8) +-#define QCA_HDR_XMIT_FROM_CPU BIT(7) +-#define QCA_HDR_XMIT_DP_BIT GENMASK(6, 0) +- + static struct sk_buff *qca_tag_xmit(struct sk_buff *skb, struct net_device *dev) + { + struct dsa_port *dp = dsa_slave_to_port(dev); +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-05-net-dsa-tag_qca-enable-promisc_on_master-flag.patch b/target/linux/generic/backport-5.15/766-05-net-dsa-tag_qca-enable-promisc_on_master-flag.patch new file mode 100644 index 0000000000..d0dd4513f3 --- /dev/null +++ b/target/linux/generic/backport-5.15/766-05-net-dsa-tag_qca-enable-promisc_on_master-flag.patch @@ -0,0 +1,32 @@ +From 101c04c3463b87061e6a3d4f72c1bc57670685a6 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:24 +0100 +Subject: [PATCH 05/16] net: dsa: tag_qca: enable promisc_on_master flag + +Ethernet MDIO packets are non-standard and DSA master expects the first +6 octets to be the MAC DA. To address these kind of packet, enable +promisc_on_master flag for the tagger. + +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + net/dsa/tag_qca.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/net/dsa/tag_qca.c b/net/dsa/tag_qca.c +index 34e565e00ece..f8df49d5956f 100644 +--- a/net/dsa/tag_qca.c ++++ b/net/dsa/tag_qca.c +@@ -68,6 +68,7 @@ static const struct dsa_device_ops qca_netdev_ops = { + .xmit = qca_tag_xmit, + .rcv = qca_tag_rcv, + .needed_headroom = QCA_HDR_LEN, ++ .promisc_on_master = true, + }; + + MODULE_LICENSE("GPL"); +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-06-net-dsa-tag_qca-add-define-for-handling-mgmt-Etherne.patch b/target/linux/generic/backport-5.15/766-06-net-dsa-tag_qca-add-define-for-handling-mgmt-Etherne.patch new file mode 100644 index 0000000000..6981e7b187 --- /dev/null +++ b/target/linux/generic/backport-5.15/766-06-net-dsa-tag_qca-add-define-for-handling-mgmt-Etherne.patch @@ -0,0 +1,117 @@ +From c2ee8181fddb293d296477f60b3eb4fa3ce4e1a6 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:25 +0100 +Subject: [PATCH 06/16] net: dsa: tag_qca: add define for handling mgmt + Ethernet packet + +Add all the required define to prepare support for mgmt read/write in +Ethernet packet. Any packet of this type has to be dropped as the only +use of these special packet is receive ack for an mgmt write request or +receive data for an mgmt read request. +A struct is used that emulates the Ethernet header but is used for a +different purpose. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + include/linux/dsa/tag_qca.h | 44 +++++++++++++++++++++++++++++++++++++ + net/dsa/tag_qca.c | 15 ++++++++++--- + 2 files changed, 56 insertions(+), 3 deletions(-) + +diff --git a/include/linux/dsa/tag_qca.h b/include/linux/dsa/tag_qca.h +index c02d2d39ff4a..f366422ab7a0 100644 +--- a/include/linux/dsa/tag_qca.h ++++ b/include/linux/dsa/tag_qca.h +@@ -12,10 +12,54 @@ + #define QCA_HDR_RECV_FRAME_IS_TAGGED BIT(3) + #define QCA_HDR_RECV_SOURCE_PORT GENMASK(2, 0) + ++/* Packet type for recv */ ++#define QCA_HDR_RECV_TYPE_NORMAL 0x0 ++#define QCA_HDR_RECV_TYPE_MIB 0x1 ++#define QCA_HDR_RECV_TYPE_RW_REG_ACK 0x2 ++ + #define QCA_HDR_XMIT_VERSION GENMASK(15, 14) + #define QCA_HDR_XMIT_PRIORITY GENMASK(13, 11) + #define QCA_HDR_XMIT_CONTROL GENMASK(10, 8) + #define QCA_HDR_XMIT_FROM_CPU BIT(7) + #define QCA_HDR_XMIT_DP_BIT GENMASK(6, 0) + ++/* Packet type for xmit */ ++#define QCA_HDR_XMIT_TYPE_NORMAL 0x0 ++#define QCA_HDR_XMIT_TYPE_RW_REG 0x1 ++ ++/* Check code for a valid mgmt packet. Switch will ignore the packet ++ * with this wrong. ++ */ ++#define QCA_HDR_MGMT_CHECK_CODE_VAL 0x5 ++ ++/* Specific define for in-band MDIO read/write with Ethernet packet */ ++#define QCA_HDR_MGMT_SEQ_LEN 4 /* 4 byte for the seq */ ++#define QCA_HDR_MGMT_COMMAND_LEN 4 /* 4 byte for the command */ ++#define QCA_HDR_MGMT_DATA1_LEN 4 /* First 4 byte for the mdio data */ ++#define QCA_HDR_MGMT_HEADER_LEN (QCA_HDR_MGMT_SEQ_LEN + \ ++ QCA_HDR_MGMT_COMMAND_LEN + \ ++ QCA_HDR_MGMT_DATA1_LEN) ++ ++#define QCA_HDR_MGMT_DATA2_LEN 12 /* Other 12 byte for the mdio data */ ++#define QCA_HDR_MGMT_PADDING_LEN 34 /* Padding to reach the min Ethernet packet */ ++ ++#define QCA_HDR_MGMT_PKT_LEN (QCA_HDR_MGMT_HEADER_LEN + \ ++ QCA_HDR_LEN + \ ++ QCA_HDR_MGMT_DATA2_LEN + \ ++ QCA_HDR_MGMT_PADDING_LEN) ++ ++#define QCA_HDR_MGMT_SEQ_NUM GENMASK(31, 0) /* 63, 32 */ ++#define QCA_HDR_MGMT_CHECK_CODE GENMASK(31, 29) /* 31, 29 */ ++#define QCA_HDR_MGMT_CMD BIT(28) /* 28 */ ++#define QCA_HDR_MGMT_LENGTH GENMASK(23, 20) /* 23, 20 */ ++#define QCA_HDR_MGMT_ADDR GENMASK(18, 0) /* 18, 0 */ ++ ++/* Special struct emulating a Ethernet header */ ++struct qca_mgmt_ethhdr { ++ u32 command; /* command bit 31:0 */ ++ u32 seq; /* seq 63:32 */ ++ u32 mdio_data; /* first 4byte mdio */ ++ __be16 hdr; /* qca hdr */ ++} __packed; ++ + #endif /* __TAG_QCA_H */ +diff --git a/net/dsa/tag_qca.c b/net/dsa/tag_qca.c +index f8df49d5956f..f17ed5be20c2 100644 +--- a/net/dsa/tag_qca.c ++++ b/net/dsa/tag_qca.c +@@ -32,10 +32,12 @@ static struct sk_buff *qca_tag_xmit(struct sk_buff *skb, struct net_device *dev) + + static struct sk_buff *qca_tag_rcv(struct sk_buff *skb, struct net_device *dev) + { +- u8 ver; +- u16 hdr; +- int port; ++ u8 ver, pk_type; + __be16 *phdr; ++ int port; ++ u16 hdr; ++ ++ BUILD_BUG_ON(sizeof(struct qca_mgmt_ethhdr) != QCA_HDR_MGMT_HEADER_LEN + QCA_HDR_LEN); + + if (unlikely(!pskb_may_pull(skb, QCA_HDR_LEN))) + return NULL; +@@ -48,6 +50,13 @@ static struct sk_buff *qca_tag_rcv(struct sk_buff *skb, struct net_device *dev) + if (unlikely(ver != QCA_HDR_VERSION)) + return NULL; + ++ /* Get pk type */ ++ pk_type = FIELD_GET(QCA_HDR_RECV_TYPE, hdr); ++ ++ /* Ethernet MDIO read/write packet */ ++ if (pk_type == QCA_HDR_RECV_TYPE_RW_REG_ACK) ++ return NULL; ++ + /* Remove QCA tag and recalculate checksum */ + skb_pull_rcsum(skb, QCA_HDR_LEN); + dsa_strip_etype_header(skb, QCA_HDR_LEN); +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-07-net-dsa-tag_qca-add-define-for-handling-MIB-packet.patch b/target/linux/generic/backport-5.15/766-07-net-dsa-tag_qca-add-define-for-handling-MIB-packet.patch new file mode 100644 index 0000000000..497518097e --- /dev/null +++ b/target/linux/generic/backport-5.15/766-07-net-dsa-tag_qca-add-define-for-handling-MIB-packet.patch @@ -0,0 +1,52 @@ +From 18be654a4345f7d937b4bfbad74bea8093e3a93c Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:26 +0100 +Subject: [PATCH 07/16] net: dsa: tag_qca: add define for handling MIB packet + +Add struct to correctly parse a mib Ethernet packet. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + include/linux/dsa/tag_qca.h | 10 ++++++++++ + net/dsa/tag_qca.c | 4 ++++ + 2 files changed, 14 insertions(+) + +diff --git a/include/linux/dsa/tag_qca.h b/include/linux/dsa/tag_qca.h +index f366422ab7a0..1fff57f2937b 100644 +--- a/include/linux/dsa/tag_qca.h ++++ b/include/linux/dsa/tag_qca.h +@@ -62,4 +62,14 @@ struct qca_mgmt_ethhdr { + __be16 hdr; /* qca hdr */ + } __packed; + ++enum mdio_cmd { ++ MDIO_WRITE = 0x0, ++ MDIO_READ ++}; ++ ++struct mib_ethhdr { ++ u32 data[3]; /* first 3 mib counter */ ++ __be16 hdr; /* qca hdr */ ++} __packed; ++ + #endif /* __TAG_QCA_H */ +diff --git a/net/dsa/tag_qca.c b/net/dsa/tag_qca.c +index f17ed5be20c2..be792cf687d9 100644 +--- a/net/dsa/tag_qca.c ++++ b/net/dsa/tag_qca.c +@@ -57,6 +57,10 @@ static struct sk_buff *qca_tag_rcv(struct sk_buff *skb, struct net_device *dev) + if (pk_type == QCA_HDR_RECV_TYPE_RW_REG_ACK) + return NULL; + ++ /* Ethernet MIB counter packet */ ++ if (pk_type == QCA_HDR_RECV_TYPE_MIB) ++ return NULL; ++ + /* Remove QCA tag and recalculate checksum */ + skb_pull_rcsum(skb, QCA_HDR_LEN); + dsa_strip_etype_header(skb, QCA_HDR_LEN); +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-08-net-dsa-tag_qca-add-support-for-handling-mgmt-and-MI.patch b/target/linux/generic/backport-5.15/766-08-net-dsa-tag_qca-add-support-for-handling-mgmt-and-MI.patch new file mode 100644 index 0000000000..4375cd08b8 --- /dev/null +++ b/target/linux/generic/backport-5.15/766-08-net-dsa-tag_qca-add-support-for-handling-mgmt-and-MI.patch @@ -0,0 +1,123 @@ +From 31eb6b4386ad91930417e3f5c8157a4b5e31cbd5 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:27 +0100 +Subject: [PATCH 08/16] net: dsa: tag_qca: add support for handling mgmt and + MIB Ethernet packet + +Add connect/disconnect helper to assign private struct to the DSA switch. +Add support for Ethernet mgmt and MIB if the DSA driver provide an handler +to correctly parse and elaborate the data. + +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + include/linux/dsa/tag_qca.h | 7 +++++++ + net/dsa/tag_qca.c | 39 ++++++++++++++++++++++++++++++++++--- + 2 files changed, 43 insertions(+), 3 deletions(-) + +diff --git a/include/linux/dsa/tag_qca.h b/include/linux/dsa/tag_qca.h +index 1fff57f2937b..4359fb0221cf 100644 +--- a/include/linux/dsa/tag_qca.h ++++ b/include/linux/dsa/tag_qca.h +@@ -72,4 +72,11 @@ struct mib_ethhdr { + __be16 hdr; /* qca hdr */ + } __packed; + ++struct qca_tagger_data { ++ void (*rw_reg_ack_handler)(struct dsa_switch *ds, ++ struct sk_buff *skb); ++ void (*mib_autocast_handler)(struct dsa_switch *ds, ++ struct sk_buff *skb); ++}; ++ + #endif /* __TAG_QCA_H */ +diff --git a/net/dsa/tag_qca.c b/net/dsa/tag_qca.c +index be792cf687d9..57d2e00f1e5d 100644 +--- a/net/dsa/tag_qca.c ++++ b/net/dsa/tag_qca.c +@@ -5,6 +5,7 @@ + + #include + #include ++#include + #include + + #include "dsa_priv.h" +@@ -32,6 +33,9 @@ static struct sk_buff *qca_tag_xmit(struct sk_buff *skb, struct net_device *dev) + + static struct sk_buff *qca_tag_rcv(struct sk_buff *skb, struct net_device *dev) + { ++ struct qca_tagger_data *tagger_data; ++ struct dsa_port *dp = dev->dsa_ptr; ++ struct dsa_switch *ds = dp->ds; + u8 ver, pk_type; + __be16 *phdr; + int port; +@@ -39,6 +43,8 @@ static struct sk_buff *qca_tag_rcv(struct sk_buff *skb, struct net_device *dev) + + BUILD_BUG_ON(sizeof(struct qca_mgmt_ethhdr) != QCA_HDR_MGMT_HEADER_LEN + QCA_HDR_LEN); + ++ tagger_data = ds->tagger_data; ++ + if (unlikely(!pskb_may_pull(skb, QCA_HDR_LEN))) + return NULL; + +@@ -53,13 +59,19 @@ static struct sk_buff *qca_tag_rcv(struct sk_buff *skb, struct net_device *dev) + /* Get pk type */ + pk_type = FIELD_GET(QCA_HDR_RECV_TYPE, hdr); + +- /* Ethernet MDIO read/write packet */ +- if (pk_type == QCA_HDR_RECV_TYPE_RW_REG_ACK) ++ /* Ethernet mgmt read/write packet */ ++ if (pk_type == QCA_HDR_RECV_TYPE_RW_REG_ACK) { ++ if (likely(tagger_data->rw_reg_ack_handler)) ++ tagger_data->rw_reg_ack_handler(ds, skb); + return NULL; ++ } + + /* Ethernet MIB counter packet */ +- if (pk_type == QCA_HDR_RECV_TYPE_MIB) ++ if (pk_type == QCA_HDR_RECV_TYPE_MIB) { ++ if (likely(tagger_data->mib_autocast_handler)) ++ tagger_data->mib_autocast_handler(ds, skb); + return NULL; ++ } + + /* Remove QCA tag and recalculate checksum */ + skb_pull_rcsum(skb, QCA_HDR_LEN); +@@ -75,9 +87,30 @@ static struct sk_buff *qca_tag_rcv(struct sk_buff *skb, struct net_device *dev) + return skb; + } + ++static int qca_tag_connect(struct dsa_switch *ds) ++{ ++ struct qca_tagger_data *tagger_data; ++ ++ tagger_data = kzalloc(sizeof(*tagger_data), GFP_KERNEL); ++ if (!tagger_data) ++ return -ENOMEM; ++ ++ ds->tagger_data = tagger_data; ++ ++ return 0; ++} ++ ++static void qca_tag_disconnect(struct dsa_switch *ds) ++{ ++ kfree(ds->tagger_data); ++ ds->tagger_data = NULL; ++} ++ + static const struct dsa_device_ops qca_netdev_ops = { + .name = "qca", + .proto = DSA_TAG_PROTO_QCA, ++ .connect = qca_tag_connect, ++ .disconnect = qca_tag_disconnect, + .xmit = qca_tag_xmit, + .rcv = qca_tag_rcv, + .needed_headroom = QCA_HDR_LEN, +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-09-net-dsa-qca8k-add-tracking-state-of-master-port.patch b/target/linux/generic/backport-5.15/766-09-net-dsa-qca8k-add-tracking-state-of-master-port.patch new file mode 100644 index 0000000000..d2799f9e7a --- /dev/null +++ b/target/linux/generic/backport-5.15/766-09-net-dsa-qca8k-add-tracking-state-of-master-port.patch @@ -0,0 +1,74 @@ +From cddbec19466a1dfb4d45ddd507d9f09f991d54ae Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:28 +0100 +Subject: [PATCH 09/16] net: dsa: qca8k: add tracking state of master port + +MDIO/MIB Ethernet require the master port and the tagger availabale to +correctly work. Use the new api master_state_change to track when master +is operational or not and set a bool in qca8k_priv. +We cache the first cached master available and we check if other cpu +port are operational when the cached one goes down. +This cached master will later be used by mdio read/write and mib request to +correctly use the working function. + +qca8k implementation for MDIO/MIB Ethernet is bad. CPU port0 is the only +one that answers with the ack packet or sends MIB Ethernet packets. For +this reason the master_state_change ignore CPU port6 and only checks +CPU port0 if it's operational and enables this mode. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 15 +++++++++++++++ + drivers/net/dsa/qca8k.h | 1 + + 2 files changed, 16 insertions(+) + +diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c +index 039694518788..ec062b9a918d 100644 +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -2383,6 +2383,20 @@ qca8k_port_lag_leave(struct dsa_switch *ds, int port, + return qca8k_lag_refresh_portmap(ds, port, lag, true); + } + ++static void ++qca8k_master_change(struct dsa_switch *ds, const struct net_device *master, ++ bool operational) ++{ ++ struct dsa_port *dp = master->dsa_ptr; ++ struct qca8k_priv *priv = ds->priv; ++ ++ /* Ethernet MIB/MDIO is only supported for CPU port 0 */ ++ if (dp->index != 0) ++ return; ++ ++ priv->mgmt_master = operational ? (struct net_device *)master : NULL; ++} ++ + static const struct dsa_switch_ops qca8k_switch_ops = { + .get_tag_protocol = qca8k_get_tag_protocol, + .setup = qca8k_setup, +@@ -2418,6 +2432,7 @@ static const struct dsa_switch_ops qca8k_switch_ops = { + .get_phy_flags = qca8k_get_phy_flags, + .port_lag_join = qca8k_port_lag_join, + .port_lag_leave = qca8k_port_lag_leave, ++ .master_state_change = qca8k_master_change, + }; + + static int qca8k_read_switch_id(struct qca8k_priv *priv) +diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h +index ab4a417b25a9..b81aad98a116 100644 +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -353,6 +353,7 @@ struct qca8k_priv { + struct dsa_switch_ops ops; + struct gpio_desc *reset_gpio; + unsigned int port_mtu[QCA8K_NUM_PORTS]; ++ struct net_device *mgmt_master; /* Track if mdio/mib Ethernet is available */ + }; + + struct qca8k_mib_desc { +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-10-net-dsa-qca8k-add-support-for-mgmt-read-write-in-Eth.patch b/target/linux/generic/backport-5.15/766-10-net-dsa-qca8k-add-support-for-mgmt-read-write-in-Eth.patch new file mode 100644 index 0000000000..dedffbc074 --- /dev/null +++ b/target/linux/generic/backport-5.15/766-10-net-dsa-qca8k-add-support-for-mgmt-read-write-in-Eth.patch @@ -0,0 +1,370 @@ +From 5950c7c0a68c915b336c70f79388626e2d576ab7 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:29 +0100 +Subject: [PATCH 10/16] net: dsa: qca8k: add support for mgmt read/write in + Ethernet packet + +Add qca8k side support for mgmt read/write in Ethernet packet. +qca8k supports some specially crafted Ethernet packet that can be used +for mgmt read/write instead of the legacy method uart/internal mdio. +This add support for the qca8k side to craft the packet and enqueue it. +Each port and the qca8k_priv have a special struct to put data in it. +The completion API is used to wait for the packet to be received back +with the requested data. + +The various steps are: +1. Craft the special packet with the qca hdr set to mgmt read/write + mode. +2. Set the lock in the dedicated mgmt struct. +3. Increment the seq number and set it in the mgmt pkt +4. Reinit the completion. +5. Enqueue the packet. +6. Wait the packet to be received. +7. Use the data set by the tagger to complete the mdio operation. + +If the completion timeouts or the ack value is not true, the legacy +mdio way is used. + +It has to be considered that in the initial setup mdio is still used and +mdio is still used until DSA is ready to accept and tag packet. + +tag_proto_connect() is used to fill the required handler for the tagger +to correctly parse and elaborate the special Ethernet mdio packet. + +Locking is added to qca8k_master_change() to make sure no mgmt Ethernet +are in progress. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 225 ++++++++++++++++++++++++++++++++++++++++ + drivers/net/dsa/qca8k.h | 13 +++ + 2 files changed, 238 insertions(+) + +diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c +index ec062b9a918d..e3a215f04559 100644 +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -20,6 +20,7 @@ + #include + #include + #include ++#include + + #include "qca8k.h" + +@@ -170,6 +171,194 @@ qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val) + return regmap_update_bits(priv->regmap, reg, mask, write_val); + } + ++static void qca8k_rw_reg_ack_handler(struct dsa_switch *ds, struct sk_buff *skb) ++{ ++ struct qca8k_mgmt_eth_data *mgmt_eth_data; ++ struct qca8k_priv *priv = ds->priv; ++ struct qca_mgmt_ethhdr *mgmt_ethhdr; ++ u8 len, cmd; ++ ++ mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb_mac_header(skb); ++ mgmt_eth_data = &priv->mgmt_eth_data; ++ ++ cmd = FIELD_GET(QCA_HDR_MGMT_CMD, mgmt_ethhdr->command); ++ len = FIELD_GET(QCA_HDR_MGMT_LENGTH, mgmt_ethhdr->command); ++ ++ /* Make sure the seq match the requested packet */ ++ if (mgmt_ethhdr->seq == mgmt_eth_data->seq) ++ mgmt_eth_data->ack = true; ++ ++ if (cmd == MDIO_READ) { ++ mgmt_eth_data->data[0] = mgmt_ethhdr->mdio_data; ++ ++ /* Get the rest of the 12 byte of data */ ++ if (len > QCA_HDR_MGMT_DATA1_LEN) ++ memcpy(mgmt_eth_data->data + 1, skb->data, ++ QCA_HDR_MGMT_DATA2_LEN); ++ } ++ ++ complete(&mgmt_eth_data->rw_done); ++} ++ ++static struct sk_buff *qca8k_alloc_mdio_header(enum mdio_cmd cmd, u32 reg, u32 *val, ++ int priority) ++{ ++ struct qca_mgmt_ethhdr *mgmt_ethhdr; ++ struct sk_buff *skb; ++ u16 hdr; ++ ++ skb = dev_alloc_skb(QCA_HDR_MGMT_PKT_LEN); ++ if (!skb) ++ return NULL; ++ ++ skb_reset_mac_header(skb); ++ skb_set_network_header(skb, skb->len); ++ ++ mgmt_ethhdr = skb_push(skb, QCA_HDR_MGMT_HEADER_LEN + QCA_HDR_LEN); ++ ++ hdr = FIELD_PREP(QCA_HDR_XMIT_VERSION, QCA_HDR_VERSION); ++ hdr |= FIELD_PREP(QCA_HDR_XMIT_PRIORITY, priority); ++ hdr |= QCA_HDR_XMIT_FROM_CPU; ++ hdr |= FIELD_PREP(QCA_HDR_XMIT_DP_BIT, BIT(0)); ++ hdr |= FIELD_PREP(QCA_HDR_XMIT_CONTROL, QCA_HDR_XMIT_TYPE_RW_REG); ++ ++ mgmt_ethhdr->command = FIELD_PREP(QCA_HDR_MGMT_ADDR, reg); ++ mgmt_ethhdr->command |= FIELD_PREP(QCA_HDR_MGMT_LENGTH, 4); ++ mgmt_ethhdr->command |= FIELD_PREP(QCA_HDR_MGMT_CMD, cmd); ++ mgmt_ethhdr->command |= FIELD_PREP(QCA_HDR_MGMT_CHECK_CODE, ++ QCA_HDR_MGMT_CHECK_CODE_VAL); ++ ++ if (cmd == MDIO_WRITE) ++ mgmt_ethhdr->mdio_data = *val; ++ ++ mgmt_ethhdr->hdr = htons(hdr); ++ ++ skb_put_zero(skb, QCA_HDR_MGMT_DATA2_LEN + QCA_HDR_MGMT_PADDING_LEN); ++ ++ return skb; ++} ++ ++static void qca8k_mdio_header_fill_seq_num(struct sk_buff *skb, u32 seq_num) ++{ ++ struct qca_mgmt_ethhdr *mgmt_ethhdr; ++ ++ mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb->data; ++ mgmt_ethhdr->seq = FIELD_PREP(QCA_HDR_MGMT_SEQ_NUM, seq_num); ++} ++ ++static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val) ++{ ++ struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data; ++ struct sk_buff *skb; ++ bool ack; ++ int ret; ++ ++ skb = qca8k_alloc_mdio_header(MDIO_READ, reg, NULL, ++ QCA8K_ETHERNET_MDIO_PRIORITY); ++ if (!skb) ++ return -ENOMEM; ++ ++ mutex_lock(&mgmt_eth_data->mutex); ++ ++ /* Check mgmt_master if is operational */ ++ if (!priv->mgmt_master) { ++ kfree_skb(skb); ++ mutex_unlock(&mgmt_eth_data->mutex); ++ return -EINVAL; ++ } ++ ++ skb->dev = priv->mgmt_master; ++ ++ reinit_completion(&mgmt_eth_data->rw_done); ++ ++ /* Increment seq_num and set it in the mdio pkt */ ++ mgmt_eth_data->seq++; ++ qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); ++ mgmt_eth_data->ack = false; ++ ++ dev_queue_xmit(skb); ++ ++ ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, ++ msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); ++ ++ *val = mgmt_eth_data->data[0]; ++ ack = mgmt_eth_data->ack; ++ ++ mutex_unlock(&mgmt_eth_data->mutex); ++ ++ if (ret <= 0) ++ return -ETIMEDOUT; ++ ++ if (!ack) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 val) ++{ ++ struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data; ++ struct sk_buff *skb; ++ bool ack; ++ int ret; ++ ++ skb = qca8k_alloc_mdio_header(MDIO_WRITE, reg, &val, ++ QCA8K_ETHERNET_MDIO_PRIORITY); ++ if (!skb) ++ return -ENOMEM; ++ ++ mutex_lock(&mgmt_eth_data->mutex); ++ ++ /* Check mgmt_master if is operational */ ++ if (!priv->mgmt_master) { ++ kfree_skb(skb); ++ mutex_unlock(&mgmt_eth_data->mutex); ++ return -EINVAL; ++ } ++ ++ skb->dev = priv->mgmt_master; ++ ++ reinit_completion(&mgmt_eth_data->rw_done); ++ ++ /* Increment seq_num and set it in the mdio pkt */ ++ mgmt_eth_data->seq++; ++ qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); ++ mgmt_eth_data->ack = false; ++ ++ dev_queue_xmit(skb); ++ ++ ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, ++ msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); ++ ++ ack = mgmt_eth_data->ack; ++ ++ mutex_unlock(&mgmt_eth_data->mutex); ++ ++ if (ret <= 0) ++ return -ETIMEDOUT; ++ ++ if (!ack) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static int ++qca8k_regmap_update_bits_eth(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val) ++{ ++ u32 val = 0; ++ int ret; ++ ++ ret = qca8k_read_eth(priv, reg, &val); ++ if (ret) ++ return ret; ++ ++ val &= ~mask; ++ val |= write_val; ++ ++ return qca8k_write_eth(priv, reg, val); ++} ++ + static int + qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) + { +@@ -178,6 +367,9 @@ qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) + u16 r1, r2, page; + int ret; + ++ if (!qca8k_read_eth(priv, reg, val)) ++ return 0; ++ + qca8k_split_addr(reg, &r1, &r2, &page); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); +@@ -201,6 +393,9 @@ qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val) + u16 r1, r2, page; + int ret; + ++ if (!qca8k_write_eth(priv, reg, val)) ++ return 0; ++ + qca8k_split_addr(reg, &r1, &r2, &page); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); +@@ -225,6 +420,9 @@ qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_ + u32 val; + int ret; + ++ if (!qca8k_regmap_update_bits_eth(priv, reg, mask, write_val)) ++ return 0; ++ + qca8k_split_addr(reg, &r1, &r2, &page); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); +@@ -2394,7 +2592,30 @@ qca8k_master_change(struct dsa_switch *ds, const struct net_device *master, + if (dp->index != 0) + return; + ++ mutex_lock(&priv->mgmt_eth_data.mutex); ++ + priv->mgmt_master = operational ? (struct net_device *)master : NULL; ++ ++ mutex_unlock(&priv->mgmt_eth_data.mutex); ++} ++ ++static int qca8k_connect_tag_protocol(struct dsa_switch *ds, ++ enum dsa_tag_protocol proto) ++{ ++ struct qca_tagger_data *tagger_data; ++ ++ switch (proto) { ++ case DSA_TAG_PROTO_QCA: ++ tagger_data = ds->tagger_data; ++ ++ tagger_data->rw_reg_ack_handler = qca8k_rw_reg_ack_handler; ++ ++ break; ++ default: ++ return -EOPNOTSUPP; ++ } ++ ++ return 0; + } + + static const struct dsa_switch_ops qca8k_switch_ops = { +@@ -2433,6 +2654,7 @@ static const struct dsa_switch_ops qca8k_switch_ops = { + .port_lag_join = qca8k_port_lag_join, + .port_lag_leave = qca8k_port_lag_leave, + .master_state_change = qca8k_master_change, ++ .connect_tag_protocol = qca8k_connect_tag_protocol, + }; + + static int qca8k_read_switch_id(struct qca8k_priv *priv) +@@ -2512,6 +2734,9 @@ qca8k_sw_probe(struct mdio_device *mdiodev) + if (!priv->ds) + return -ENOMEM; + ++ mutex_init(&priv->mgmt_eth_data.mutex); ++ init_completion(&priv->mgmt_eth_data.rw_done); ++ + priv->ds->dev = &mdiodev->dev; + priv->ds->num_ports = QCA8K_NUM_PORTS; + priv->ds->priv = priv; +diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h +index b81aad98a116..75c28689a652 100644 +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -11,6 +11,10 @@ + #include + #include + #include ++#include ++ ++#define QCA8K_ETHERNET_MDIO_PRIORITY 7 ++#define QCA8K_ETHERNET_TIMEOUT 100 + + #define QCA8K_NUM_PORTS 7 + #define QCA8K_NUM_CPU_PORTS 2 +@@ -328,6 +332,14 @@ enum { + QCA8K_CPU_PORT6, + }; + ++struct qca8k_mgmt_eth_data { ++ struct completion rw_done; ++ struct mutex mutex; /* Enforce one mdio read/write at time */ ++ bool ack; ++ u32 seq; ++ u32 data[4]; ++}; ++ + struct qca8k_ports_config { + bool sgmii_rx_clk_falling_edge; + bool sgmii_tx_clk_falling_edge; +@@ -354,6 +366,7 @@ struct qca8k_priv { + struct gpio_desc *reset_gpio; + unsigned int port_mtu[QCA8K_NUM_PORTS]; + struct net_device *mgmt_master; /* Track if mdio/mib Ethernet is available */ ++ struct qca8k_mgmt_eth_data mgmt_eth_data; + }; + + struct qca8k_mib_desc { +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-11-net-dsa-qca8k-add-support-for-mib-autocast-in-Ethern.patch b/target/linux/generic/backport-5.15/766-11-net-dsa-qca8k-add-support-for-mib-autocast-in-Ethern.patch new file mode 100644 index 0000000000..69882e9c21 --- /dev/null +++ b/target/linux/generic/backport-5.15/766-11-net-dsa-qca8k-add-support-for-mib-autocast-in-Ethern.patch @@ -0,0 +1,233 @@ +From 5c957c7ca78cce5e4b96866722b0115bd758d945 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:30 +0100 +Subject: [PATCH 11/16] net: dsa: qca8k: add support for mib autocast in + Ethernet packet + +The switch can autocast MIB counter using Ethernet packet. +Add support for this and provide a handler for the tagger. +The switch will send packet with MIB counter for each port, the switch +will use completion API to wait for the correct packet to be received +and will complete the task only when each packet is received. +Although the handler will drop all the other packet, we still have to +consume each MIB packet to complete the request. This is done to prevent +mixed data with concurrent ethtool request. + +connect_tag_protocol() is used to add the handler to the tag_qca tagger, +master_state_change() use the MIB lock to make sure no MIB Ethernet is +in progress. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 106 +++++++++++++++++++++++++++++++++++++++- + drivers/net/dsa/qca8k.h | 17 ++++++- + 2 files changed, 121 insertions(+), 2 deletions(-) + +diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c +index e3a215f04559..199cf4f761c0 100644 +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -830,7 +830,10 @@ qca8k_mib_init(struct qca8k_priv *priv) + int ret; + + mutex_lock(&priv->reg_mutex); +- ret = regmap_set_bits(priv->regmap, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY); ++ ret = regmap_update_bits(priv->regmap, QCA8K_REG_MIB, ++ QCA8K_MIB_FUNC | QCA8K_MIB_BUSY, ++ FIELD_PREP(QCA8K_MIB_FUNC, QCA8K_MIB_FLUSH) | ++ QCA8K_MIB_BUSY); + if (ret) + goto exit; + +@@ -1901,6 +1904,97 @@ qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) + ETH_GSTRING_LEN); + } + ++static void qca8k_mib_autocast_handler(struct dsa_switch *ds, struct sk_buff *skb) ++{ ++ const struct qca8k_match_data *match_data; ++ struct qca8k_mib_eth_data *mib_eth_data; ++ struct qca8k_priv *priv = ds->priv; ++ const struct qca8k_mib_desc *mib; ++ struct mib_ethhdr *mib_ethhdr; ++ int i, mib_len, offset = 0; ++ u64 *data; ++ u8 port; ++ ++ mib_ethhdr = (struct mib_ethhdr *)skb_mac_header(skb); ++ mib_eth_data = &priv->mib_eth_data; ++ ++ /* The switch autocast every port. Ignore other packet and ++ * parse only the requested one. ++ */ ++ port = FIELD_GET(QCA_HDR_RECV_SOURCE_PORT, ntohs(mib_ethhdr->hdr)); ++ if (port != mib_eth_data->req_port) ++ goto exit; ++ ++ match_data = device_get_match_data(priv->dev); ++ data = mib_eth_data->data; ++ ++ for (i = 0; i < match_data->mib_count; i++) { ++ mib = &ar8327_mib[i]; ++ ++ /* First 3 mib are present in the skb head */ ++ if (i < 3) { ++ data[i] = mib_ethhdr->data[i]; ++ continue; ++ } ++ ++ mib_len = sizeof(uint32_t); ++ ++ /* Some mib are 64 bit wide */ ++ if (mib->size == 2) ++ mib_len = sizeof(uint64_t); ++ ++ /* Copy the mib value from packet to the */ ++ memcpy(data + i, skb->data + offset, mib_len); ++ ++ /* Set the offset for the next mib */ ++ offset += mib_len; ++ } ++ ++exit: ++ /* Complete on receiving all the mib packet */ ++ if (refcount_dec_and_test(&mib_eth_data->port_parsed)) ++ complete(&mib_eth_data->rw_done); ++} ++ ++static int ++qca8k_get_ethtool_stats_eth(struct dsa_switch *ds, int port, u64 *data) ++{ ++ struct dsa_port *dp = dsa_to_port(ds, port); ++ struct qca8k_mib_eth_data *mib_eth_data; ++ struct qca8k_priv *priv = ds->priv; ++ int ret; ++ ++ mib_eth_data = &priv->mib_eth_data; ++ ++ mutex_lock(&mib_eth_data->mutex); ++ ++ reinit_completion(&mib_eth_data->rw_done); ++ ++ mib_eth_data->req_port = dp->index; ++ mib_eth_data->data = data; ++ refcount_set(&mib_eth_data->port_parsed, QCA8K_NUM_PORTS); ++ ++ mutex_lock(&priv->reg_mutex); ++ ++ /* Send mib autocast request */ ++ ret = regmap_update_bits(priv->regmap, QCA8K_REG_MIB, ++ QCA8K_MIB_FUNC | QCA8K_MIB_BUSY, ++ FIELD_PREP(QCA8K_MIB_FUNC, QCA8K_MIB_CAST) | ++ QCA8K_MIB_BUSY); ++ ++ mutex_unlock(&priv->reg_mutex); ++ ++ if (ret) ++ goto exit; ++ ++ ret = wait_for_completion_timeout(&mib_eth_data->rw_done, QCA8K_ETHERNET_TIMEOUT); ++ ++exit: ++ mutex_unlock(&mib_eth_data->mutex); ++ ++ return ret; ++} ++ + static void + qca8k_get_ethtool_stats(struct dsa_switch *ds, int port, + uint64_t *data) +@@ -1912,6 +2006,10 @@ qca8k_get_ethtool_stats(struct dsa_switch *ds, int port, + u32 hi = 0; + int ret; + ++ if (priv->mgmt_master && ++ qca8k_get_ethtool_stats_eth(ds, port, data) > 0) ++ return; ++ + match_data = of_device_get_match_data(priv->dev); + + for (i = 0; i < match_data->mib_count; i++) { +@@ -2593,9 +2691,11 @@ qca8k_master_change(struct dsa_switch *ds, const struct net_device *master, + return; + + mutex_lock(&priv->mgmt_eth_data.mutex); ++ mutex_lock(&priv->mib_eth_data.mutex); + + priv->mgmt_master = operational ? (struct net_device *)master : NULL; + ++ mutex_unlock(&priv->mib_eth_data.mutex); + mutex_unlock(&priv->mgmt_eth_data.mutex); + } + +@@ -2609,6 +2709,7 @@ static int qca8k_connect_tag_protocol(struct dsa_switch *ds, + tagger_data = ds->tagger_data; + + tagger_data->rw_reg_ack_handler = qca8k_rw_reg_ack_handler; ++ tagger_data->mib_autocast_handler = qca8k_mib_autocast_handler; + + break; + default: +@@ -2737,6 +2838,9 @@ qca8k_sw_probe(struct mdio_device *mdiodev) + mutex_init(&priv->mgmt_eth_data.mutex); + init_completion(&priv->mgmt_eth_data.rw_done); + ++ mutex_init(&priv->mib_eth_data.mutex); ++ init_completion(&priv->mib_eth_data.rw_done); ++ + priv->ds->dev = &mdiodev->dev; + priv->ds->num_ports = QCA8K_NUM_PORTS; + priv->ds->priv = priv; +diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h +index 75c28689a652..2d7d084db089 100644 +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -67,7 +67,7 @@ + #define QCA8K_REG_MODULE_EN 0x030 + #define QCA8K_MODULE_EN_MIB BIT(0) + #define QCA8K_REG_MIB 0x034 +-#define QCA8K_MIB_FLUSH BIT(24) ++#define QCA8K_MIB_FUNC GENMASK(26, 24) + #define QCA8K_MIB_CPU_KEEP BIT(20) + #define QCA8K_MIB_BUSY BIT(17) + #define QCA8K_MDIO_MASTER_CTRL 0x3c +@@ -317,6 +317,12 @@ enum qca8k_vlan_cmd { + QCA8K_VLAN_READ = 6, + }; + ++enum qca8k_mid_cmd { ++ QCA8K_MIB_FLUSH = 1, ++ QCA8K_MIB_FLUSH_PORT = 2, ++ QCA8K_MIB_CAST = 3, ++}; ++ + struct ar8xxx_port_status { + int enabled; + }; +@@ -340,6 +346,14 @@ struct qca8k_mgmt_eth_data { + u32 data[4]; + }; + ++struct qca8k_mib_eth_data { ++ struct completion rw_done; ++ struct mutex mutex; /* Process one command at time */ ++ refcount_t port_parsed; /* Counter to track parsed port */ ++ u8 req_port; ++ u64 *data; /* pointer to ethtool data */ ++}; ++ + struct qca8k_ports_config { + bool sgmii_rx_clk_falling_edge; + bool sgmii_tx_clk_falling_edge; +@@ -367,6 +381,7 @@ struct qca8k_priv { + unsigned int port_mtu[QCA8K_NUM_PORTS]; + struct net_device *mgmt_master; /* Track if mdio/mib Ethernet is available */ + struct qca8k_mgmt_eth_data mgmt_eth_data; ++ struct qca8k_mib_eth_data mib_eth_data; + }; + + struct qca8k_mib_desc { +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-12-net-dsa-qca8k-add-support-for-phy-read-write-with-mg.patch b/target/linux/generic/backport-5.15/766-12-net-dsa-qca8k-add-support-for-phy-read-write-with-mg.patch new file mode 100644 index 0000000000..5c65626e54 --- /dev/null +++ b/target/linux/generic/backport-5.15/766-12-net-dsa-qca8k-add-support-for-phy-read-write-with-mg.patch @@ -0,0 +1,294 @@ +From 2cd5485663847d468dc207b3ff85fb1fab44d97f Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:31 +0100 +Subject: [PATCH 12/16] net: dsa: qca8k: add support for phy read/write with + mgmt Ethernet + +Use mgmt Ethernet also for phy read/write if availabale. Use a different +seq number to make sure we receive the correct packet. +On any error, we fallback to the legacy mdio read/write. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 216 ++++++++++++++++++++++++++++++++++++++++ + drivers/net/dsa/qca8k.h | 1 + + 2 files changed, 217 insertions(+) + +diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c +index 199cf4f761c0..0ce5b7ca0b7f 100644 +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -867,6 +867,199 @@ qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable) + regmap_clear_bits(priv->regmap, QCA8K_REG_PORT_STATUS(port), mask); + } + ++static int ++qca8k_phy_eth_busy_wait(struct qca8k_mgmt_eth_data *mgmt_eth_data, ++ struct sk_buff *read_skb, u32 *val) ++{ ++ struct sk_buff *skb = skb_copy(read_skb, GFP_KERNEL); ++ bool ack; ++ int ret; ++ ++ reinit_completion(&mgmt_eth_data->rw_done); ++ ++ /* Increment seq_num and set it in the copy pkt */ ++ mgmt_eth_data->seq++; ++ qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq); ++ mgmt_eth_data->ack = false; ++ ++ dev_queue_xmit(skb); ++ ++ ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, ++ QCA8K_ETHERNET_TIMEOUT); ++ ++ ack = mgmt_eth_data->ack; ++ ++ if (ret <= 0) ++ return -ETIMEDOUT; ++ ++ if (!ack) ++ return -EINVAL; ++ ++ *val = mgmt_eth_data->data[0]; ++ ++ return 0; ++} ++ ++static int ++qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy, ++ int regnum, u16 data) ++{ ++ struct sk_buff *write_skb, *clear_skb, *read_skb; ++ struct qca8k_mgmt_eth_data *mgmt_eth_data; ++ u32 write_val, clear_val = 0, val; ++ struct net_device *mgmt_master; ++ int ret, ret1; ++ bool ack; ++ ++ if (regnum >= QCA8K_MDIO_MASTER_MAX_REG) ++ return -EINVAL; ++ ++ mgmt_eth_data = &priv->mgmt_eth_data; ++ ++ write_val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN | ++ QCA8K_MDIO_MASTER_PHY_ADDR(phy) | ++ QCA8K_MDIO_MASTER_REG_ADDR(regnum); ++ ++ if (read) { ++ write_val |= QCA8K_MDIO_MASTER_READ; ++ } else { ++ write_val |= QCA8K_MDIO_MASTER_WRITE; ++ write_val |= QCA8K_MDIO_MASTER_DATA(data); ++ } ++ ++ /* Prealloc all the needed skb before the lock */ ++ write_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, ++ &write_val, QCA8K_ETHERNET_PHY_PRIORITY); ++ if (!write_skb) ++ return -ENOMEM; ++ ++ clear_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, ++ &clear_val, QCA8K_ETHERNET_PHY_PRIORITY); ++ if (!write_skb) { ++ ret = -ENOMEM; ++ goto err_clear_skb; ++ } ++ ++ read_skb = qca8k_alloc_mdio_header(MDIO_READ, QCA8K_MDIO_MASTER_CTRL, ++ &clear_val, QCA8K_ETHERNET_PHY_PRIORITY); ++ if (!write_skb) { ++ ret = -ENOMEM; ++ goto err_read_skb; ++ } ++ ++ /* Actually start the request: ++ * 1. Send mdio master packet ++ * 2. Busy Wait for mdio master command ++ * 3. Get the data if we are reading ++ * 4. Reset the mdio master (even with error) ++ */ ++ mutex_lock(&mgmt_eth_data->mutex); ++ ++ /* Check if mgmt_master is operational */ ++ mgmt_master = priv->mgmt_master; ++ if (!mgmt_master) { ++ mutex_unlock(&mgmt_eth_data->mutex); ++ ret = -EINVAL; ++ goto err_mgmt_master; ++ } ++ ++ read_skb->dev = mgmt_master; ++ clear_skb->dev = mgmt_master; ++ write_skb->dev = mgmt_master; ++ ++ reinit_completion(&mgmt_eth_data->rw_done); ++ ++ /* Increment seq_num and set it in the write pkt */ ++ mgmt_eth_data->seq++; ++ qca8k_mdio_header_fill_seq_num(write_skb, mgmt_eth_data->seq); ++ mgmt_eth_data->ack = false; ++ ++ dev_queue_xmit(write_skb); ++ ++ ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, ++ QCA8K_ETHERNET_TIMEOUT); ++ ++ ack = mgmt_eth_data->ack; ++ ++ if (ret <= 0) { ++ ret = -ETIMEDOUT; ++ kfree_skb(read_skb); ++ goto exit; ++ } ++ ++ if (!ack) { ++ ret = -EINVAL; ++ kfree_skb(read_skb); ++ goto exit; ++ } ++ ++ ret = read_poll_timeout(qca8k_phy_eth_busy_wait, ret1, ++ !(val & QCA8K_MDIO_MASTER_BUSY), 0, ++ QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, ++ mgmt_eth_data, read_skb, &val); ++ ++ if (ret < 0 && ret1 < 0) { ++ ret = ret1; ++ goto exit; ++ } ++ ++ if (read) { ++ reinit_completion(&mgmt_eth_data->rw_done); ++ ++ /* Increment seq_num and set it in the read pkt */ ++ mgmt_eth_data->seq++; ++ qca8k_mdio_header_fill_seq_num(read_skb, mgmt_eth_data->seq); ++ mgmt_eth_data->ack = false; ++ ++ dev_queue_xmit(read_skb); ++ ++ ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, ++ QCA8K_ETHERNET_TIMEOUT); ++ ++ ack = mgmt_eth_data->ack; ++ ++ if (ret <= 0) { ++ ret = -ETIMEDOUT; ++ goto exit; ++ } ++ ++ if (!ack) { ++ ret = -EINVAL; ++ goto exit; ++ } ++ ++ ret = mgmt_eth_data->data[0] & QCA8K_MDIO_MASTER_DATA_MASK; ++ } else { ++ kfree_skb(read_skb); ++ } ++exit: ++ reinit_completion(&mgmt_eth_data->rw_done); ++ ++ /* Increment seq_num and set it in the clear pkt */ ++ mgmt_eth_data->seq++; ++ qca8k_mdio_header_fill_seq_num(clear_skb, mgmt_eth_data->seq); ++ mgmt_eth_data->ack = false; ++ ++ dev_queue_xmit(clear_skb); ++ ++ wait_for_completion_timeout(&mgmt_eth_data->rw_done, ++ QCA8K_ETHERNET_TIMEOUT); ++ ++ mutex_unlock(&mgmt_eth_data->mutex); ++ ++ return ret; ++ ++ /* Error handling before lock */ ++err_mgmt_master: ++ kfree_skb(read_skb); ++err_read_skb: ++ kfree_skb(clear_skb); ++err_clear_skb: ++ kfree_skb(write_skb); ++ ++ return ret; ++} ++ + static u32 + qca8k_port_to_phy(int port) + { +@@ -989,6 +1182,12 @@ qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 da + { + struct qca8k_priv *priv = slave_bus->priv; + struct mii_bus *bus = priv->bus; ++ int ret; ++ ++ /* Use mdio Ethernet when available, fallback to legacy one on error */ ++ ret = qca8k_phy_eth_command(priv, false, phy, regnum, data); ++ if (!ret) ++ return 0; + + return qca8k_mdio_write(bus, phy, regnum, data); + } +@@ -998,6 +1197,12 @@ qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum) + { + struct qca8k_priv *priv = slave_bus->priv; + struct mii_bus *bus = priv->bus; ++ int ret; ++ ++ /* Use mdio Ethernet when available, fallback to legacy one on error */ ++ ret = qca8k_phy_eth_command(priv, true, phy, regnum, 0); ++ if (ret >= 0) ++ return ret; + + return qca8k_mdio_read(bus, phy, regnum); + } +@@ -1006,6 +1211,7 @@ static int + qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data) + { + struct qca8k_priv *priv = ds->priv; ++ int ret; + + /* Check if the legacy mapping should be used and the + * port is not correctly mapped to the right PHY in the +@@ -1014,6 +1220,11 @@ qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data) + if (priv->legacy_phy_port_mapping) + port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; + ++ /* Use mdio Ethernet when available, fallback to legacy one on error */ ++ ret = qca8k_phy_eth_command(priv, false, port, regnum, 0); ++ if (!ret) ++ return ret; ++ + return qca8k_mdio_write(priv->bus, port, regnum, data); + } + +@@ -1030,6 +1241,11 @@ qca8k_phy_read(struct dsa_switch *ds, int port, int regnum) + if (priv->legacy_phy_port_mapping) + port = qca8k_port_to_phy(port) % PHY_MAX_ADDR; + ++ /* Use mdio Ethernet when available, fallback to legacy one on error */ ++ ret = qca8k_phy_eth_command(priv, true, port, regnum, 0); ++ if (ret >= 0) ++ return ret; ++ + ret = qca8k_mdio_read(priv->bus, port, regnum); + + if (ret < 0) +diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h +index 2d7d084db089..c6f6abd2108e 100644 +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -14,6 +14,7 @@ + #include + + #define QCA8K_ETHERNET_MDIO_PRIORITY 7 ++#define QCA8K_ETHERNET_PHY_PRIORITY 6 + #define QCA8K_ETHERNET_TIMEOUT 100 + + #define QCA8K_NUM_PORTS 7 +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-13-net-dsa-qca8k-move-page-cache-to-driver-priv.patch b/target/linux/generic/backport-5.15/766-13-net-dsa-qca8k-move-page-cache-to-driver-priv.patch new file mode 100644 index 0000000000..d69b959e56 --- /dev/null +++ b/target/linux/generic/backport-5.15/766-13-net-dsa-qca8k-move-page-cache-to-driver-priv.patch @@ -0,0 +1,215 @@ +From 4264350acb75430d5021a1d7de56a33faf69a097 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:32 +0100 +Subject: [PATCH 13/16] net: dsa: qca8k: move page cache to driver priv + +There can be multiple qca8k switch on the same system. Move the static +qca8k_current_page to qca8k_priv and make it specific for each switch. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 42 ++++++++++++++++++++--------------------- + drivers/net/dsa/qca8k.h | 9 +++++++++ + 2 files changed, 29 insertions(+), 22 deletions(-) + +diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c +index 0ce5b7ca0b7f..86d3742b1038 100644 +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -75,12 +75,6 @@ static const struct qca8k_mib_desc ar8327_mib[] = { + MIB_DESC(1, 0xac, "TXUnicast"), + }; + +-/* The 32bit switch registers are accessed indirectly. To achieve this we need +- * to set the page of the register. Track the last page that was set to reduce +- * mdio writes +- */ +-static u16 qca8k_current_page = 0xffff; +- + static void + qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page) + { +@@ -134,11 +128,13 @@ qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val) + } + + static int +-qca8k_set_page(struct mii_bus *bus, u16 page) ++qca8k_set_page(struct qca8k_priv *priv, u16 page) + { ++ u16 *cached_page = &priv->mdio_cache.page; ++ struct mii_bus *bus = priv->bus; + int ret; + +- if (page == qca8k_current_page) ++ if (page == *cached_page) + return 0; + + ret = bus->write(bus, 0x18, 0, page); +@@ -148,7 +144,7 @@ qca8k_set_page(struct mii_bus *bus, u16 page) + return ret; + } + +- qca8k_current_page = page; ++ *cached_page = page; + usleep_range(1000, 2000); + return 0; + } +@@ -374,7 +370,7 @@ qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- ret = qca8k_set_page(bus, page); ++ ret = qca8k_set_page(priv, page); + if (ret < 0) + goto exit; + +@@ -400,7 +396,7 @@ qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val) + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- ret = qca8k_set_page(bus, page); ++ ret = qca8k_set_page(priv, page); + if (ret < 0) + goto exit; + +@@ -427,7 +423,7 @@ qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_ + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- ret = qca8k_set_page(bus, page); ++ ret = qca8k_set_page(priv, page); + if (ret < 0) + goto exit; + +@@ -1098,8 +1094,9 @@ qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask) + } + + static int +-qca8k_mdio_write(struct mii_bus *bus, int phy, int regnum, u16 data) ++qca8k_mdio_write(struct qca8k_priv *priv, int phy, int regnum, u16 data) + { ++ struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + u32 val; + int ret; +@@ -1116,7 +1113,7 @@ qca8k_mdio_write(struct mii_bus *bus, int phy, int regnum, u16 data) + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- ret = qca8k_set_page(bus, page); ++ ret = qca8k_set_page(priv, page); + if (ret) + goto exit; + +@@ -1135,8 +1132,9 @@ qca8k_mdio_write(struct mii_bus *bus, int phy, int regnum, u16 data) + } + + static int +-qca8k_mdio_read(struct mii_bus *bus, int phy, int regnum) ++qca8k_mdio_read(struct qca8k_priv *priv, int phy, int regnum) + { ++ struct mii_bus *bus = priv->bus; + u16 r1, r2, page; + u32 val; + int ret; +@@ -1152,7 +1150,7 @@ qca8k_mdio_read(struct mii_bus *bus, int phy, int regnum) + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + +- ret = qca8k_set_page(bus, page); ++ ret = qca8k_set_page(priv, page); + if (ret) + goto exit; + +@@ -1181,7 +1179,6 @@ static int + qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 data) + { + struct qca8k_priv *priv = slave_bus->priv; +- struct mii_bus *bus = priv->bus; + int ret; + + /* Use mdio Ethernet when available, fallback to legacy one on error */ +@@ -1189,14 +1186,13 @@ qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 da + if (!ret) + return 0; + +- return qca8k_mdio_write(bus, phy, regnum, data); ++ return qca8k_mdio_write(priv, phy, regnum, data); + } + + static int + qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum) + { + struct qca8k_priv *priv = slave_bus->priv; +- struct mii_bus *bus = priv->bus; + int ret; + + /* Use mdio Ethernet when available, fallback to legacy one on error */ +@@ -1204,7 +1200,7 @@ qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum) + if (ret >= 0) + return ret; + +- return qca8k_mdio_read(bus, phy, regnum); ++ return qca8k_mdio_read(priv, phy, regnum); + } + + static int +@@ -1225,7 +1221,7 @@ qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data) + if (!ret) + return ret; + +- return qca8k_mdio_write(priv->bus, port, regnum, data); ++ return qca8k_mdio_write(priv, port, regnum, data); + } + + static int +@@ -1246,7 +1242,7 @@ qca8k_phy_read(struct dsa_switch *ds, int port, int regnum) + if (ret >= 0) + return ret; + +- ret = qca8k_mdio_read(priv->bus, port, regnum); ++ ret = qca8k_mdio_read(priv, port, regnum); + + if (ret < 0) + return 0xffff; +@@ -3042,6 +3038,8 @@ qca8k_sw_probe(struct mdio_device *mdiodev) + return PTR_ERR(priv->regmap); + } + ++ priv->mdio_cache.page = 0xffff; ++ + /* Check the detected switch id */ + ret = qca8k_read_switch_id(priv); + if (ret) +diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h +index c6f6abd2108e..57368acae41b 100644 +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -363,6 +363,14 @@ struct qca8k_ports_config { + u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */ + }; + ++struct qca8k_mdio_cache { ++/* The 32bit switch registers are accessed indirectly. To achieve this we need ++ * to set the page of the register. Track the last page that was set to reduce ++ * mdio writes ++ */ ++ u16 page; ++}; ++ + struct qca8k_priv { + u8 switch_id; + u8 switch_revision; +@@ -383,6 +391,7 @@ struct qca8k_priv { + struct net_device *mgmt_master; /* Track if mdio/mib Ethernet is available */ + struct qca8k_mgmt_eth_data mgmt_eth_data; + struct qca8k_mib_eth_data mib_eth_data; ++ struct qca8k_mdio_cache mdio_cache; + }; + + struct qca8k_mib_desc { +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-14-net-dsa-qca8k-cache-lo-and-hi-for-mdio-write.patch b/target/linux/generic/backport-5.15/766-14-net-dsa-qca8k-cache-lo-and-hi-for-mdio-write.patch new file mode 100644 index 0000000000..72de25c9d8 --- /dev/null +++ b/target/linux/generic/backport-5.15/766-14-net-dsa-qca8k-cache-lo-and-hi-for-mdio-write.patch @@ -0,0 +1,171 @@ +From 2481d206fae7884cd07014fd1318e63af35e99eb Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:33 +0100 +Subject: [PATCH 14/16] net: dsa: qca8k: cache lo and hi for mdio write + +From Documentation, we can cache lo and hi the same way we do with the +page. This massively reduce the mdio write as 3/4 of the time as we only +require to write the lo or hi part for a mdio write. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 61 +++++++++++++++++++++++++++++++++-------- + drivers/net/dsa/qca8k.h | 5 ++++ + 2 files changed, 54 insertions(+), 12 deletions(-) + +diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c +index 86d3742b1038..0cce3a6030af 100644 +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -88,6 +88,44 @@ qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page) + *page = regaddr & 0x3ff; + } + ++static int ++qca8k_set_lo(struct qca8k_priv *priv, int phy_id, u32 regnum, u16 lo) ++{ ++ u16 *cached_lo = &priv->mdio_cache.lo; ++ struct mii_bus *bus = priv->bus; ++ int ret; ++ ++ if (lo == *cached_lo) ++ return 0; ++ ++ ret = bus->write(bus, phy_id, regnum, lo); ++ if (ret < 0) ++ dev_err_ratelimited(&bus->dev, ++ "failed to write qca8k 32bit lo register\n"); ++ ++ *cached_lo = lo; ++ return 0; ++} ++ ++static int ++qca8k_set_hi(struct qca8k_priv *priv, int phy_id, u32 regnum, u16 hi) ++{ ++ u16 *cached_hi = &priv->mdio_cache.hi; ++ struct mii_bus *bus = priv->bus; ++ int ret; ++ ++ if (hi == *cached_hi) ++ return 0; ++ ++ ret = bus->write(bus, phy_id, regnum, hi); ++ if (ret < 0) ++ dev_err_ratelimited(&bus->dev, ++ "failed to write qca8k 32bit hi register\n"); ++ ++ *cached_hi = hi; ++ return 0; ++} ++ + static int + qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val) + { +@@ -111,7 +149,7 @@ qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val) + } + + static void +-qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val) ++qca8k_mii_write32(struct qca8k_priv *priv, int phy_id, u32 regnum, u32 val) + { + u16 lo, hi; + int ret; +@@ -119,12 +157,9 @@ qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val) + lo = val & 0xffff; + hi = (u16)(val >> 16); + +- ret = bus->write(bus, phy_id, regnum, lo); ++ ret = qca8k_set_lo(priv, phy_id, regnum, lo); + if (ret >= 0) +- ret = bus->write(bus, phy_id, regnum + 1, hi); +- if (ret < 0) +- dev_err_ratelimited(&bus->dev, +- "failed to write qca8k 32bit register\n"); ++ ret = qca8k_set_hi(priv, phy_id, regnum + 1, hi); + } + + static int +@@ -400,7 +435,7 @@ qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val) + if (ret < 0) + goto exit; + +- qca8k_mii_write32(bus, 0x10 | r2, r1, val); ++ qca8k_mii_write32(priv, 0x10 | r2, r1, val); + + exit: + mutex_unlock(&bus->mdio_lock); +@@ -433,7 +468,7 @@ qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_ + + val &= ~mask; + val |= write_val; +- qca8k_mii_write32(bus, 0x10 | r2, r1, val); ++ qca8k_mii_write32(priv, 0x10 | r2, r1, val); + + exit: + mutex_unlock(&bus->mdio_lock); +@@ -1117,14 +1152,14 @@ qca8k_mdio_write(struct qca8k_priv *priv, int phy, int regnum, u16 data) + if (ret) + goto exit; + +- qca8k_mii_write32(bus, 0x10 | r2, r1, val); ++ qca8k_mii_write32(priv, 0x10 | r2, r1, val); + + ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL, + QCA8K_MDIO_MASTER_BUSY); + + exit: + /* even if the busy_wait timeouts try to clear the MASTER_EN */ +- qca8k_mii_write32(bus, 0x10 | r2, r1, 0); ++ qca8k_mii_write32(priv, 0x10 | r2, r1, 0); + + mutex_unlock(&bus->mdio_lock); + +@@ -1154,7 +1189,7 @@ qca8k_mdio_read(struct qca8k_priv *priv, int phy, int regnum) + if (ret) + goto exit; + +- qca8k_mii_write32(bus, 0x10 | r2, r1, val); ++ qca8k_mii_write32(priv, 0x10 | r2, r1, val); + + ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL, + QCA8K_MDIO_MASTER_BUSY); +@@ -1165,7 +1200,7 @@ qca8k_mdio_read(struct qca8k_priv *priv, int phy, int regnum) + + exit: + /* even if the busy_wait timeouts try to clear the MASTER_EN */ +- qca8k_mii_write32(bus, 0x10 | r2, r1, 0); ++ qca8k_mii_write32(priv, 0x10 | r2, r1, 0); + + mutex_unlock(&bus->mdio_lock); + +@@ -3039,6 +3074,8 @@ qca8k_sw_probe(struct mdio_device *mdiodev) + } + + priv->mdio_cache.page = 0xffff; ++ priv->mdio_cache.lo = 0xffff; ++ priv->mdio_cache.hi = 0xffff; + + /* Check the detected switch id */ + ret = qca8k_read_switch_id(priv); +diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h +index 57368acae41b..c3d3c2269b1d 100644 +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -369,6 +369,11 @@ struct qca8k_mdio_cache { + * mdio writes + */ + u16 page; ++/* lo and hi can also be cached and from Documentation we can skip one ++ * extra mdio write if lo or hi is didn't change. ++ */ ++ u16 lo; ++ u16 hi; + }; + + struct qca8k_priv { +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-15-net-dsa-qca8k-add-support-for-larger-read-write-size.patch b/target/linux/generic/backport-5.15/766-15-net-dsa-qca8k-add-support-for-larger-read-write-size.patch new file mode 100644 index 0000000000..4b735224b6 --- /dev/null +++ b/target/linux/generic/backport-5.15/766-15-net-dsa-qca8k-add-support-for-larger-read-write-size.patch @@ -0,0 +1,211 @@ +From 90386223f44e2a751d7e9e9ac8f78ea33358a891 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:34 +0100 +Subject: [PATCH 15/16] net: dsa: qca8k: add support for larger read/write size + with mgmt Ethernet + +mgmt Ethernet packet can read/write up to 16byte at times. The len reg +is limited to 15 (0xf). The switch actually sends and accepts data in 4 +different steps of len values. +Len steps: +- 0: nothing +- 1-4: first 4 byte +- 5-6: first 12 byte +- 7-15: all 16 byte + +In the alloc skb function we check if the len is 16 and we fix it to a +len of 15. It the read/write function interest to extract the real asked +data. The tagger handler will always copy the fully 16byte with a READ +command. This is useful for some big regs like the fdb reg that are +more than 4byte of data. This permits to introduce a bulk function that +will send and request the entire entry in one go. +Write function is changed and it does now require to pass the pointer to +val to also handle array val. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 61 +++++++++++++++++++++++++++-------------- + 1 file changed, 41 insertions(+), 20 deletions(-) + +diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c +index 0cce3a6030af..a1b76dcd2eb6 100644 +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -222,7 +222,9 @@ static void qca8k_rw_reg_ack_handler(struct dsa_switch *ds, struct sk_buff *skb) + if (cmd == MDIO_READ) { + mgmt_eth_data->data[0] = mgmt_ethhdr->mdio_data; + +- /* Get the rest of the 12 byte of data */ ++ /* Get the rest of the 12 byte of data. ++ * The read/write function will extract the requested data. ++ */ + if (len > QCA_HDR_MGMT_DATA1_LEN) + memcpy(mgmt_eth_data->data + 1, skb->data, + QCA_HDR_MGMT_DATA2_LEN); +@@ -232,16 +234,30 @@ static void qca8k_rw_reg_ack_handler(struct dsa_switch *ds, struct sk_buff *skb) + } + + static struct sk_buff *qca8k_alloc_mdio_header(enum mdio_cmd cmd, u32 reg, u32 *val, +- int priority) ++ int priority, unsigned int len) + { + struct qca_mgmt_ethhdr *mgmt_ethhdr; ++ unsigned int real_len; + struct sk_buff *skb; ++ u32 *data2; + u16 hdr; + + skb = dev_alloc_skb(QCA_HDR_MGMT_PKT_LEN); + if (!skb) + return NULL; + ++ /* Max value for len reg is 15 (0xf) but the switch actually return 16 byte ++ * Actually for some reason the steps are: ++ * 0: nothing ++ * 1-4: first 4 byte ++ * 5-6: first 12 byte ++ * 7-15: all 16 byte ++ */ ++ if (len == 16) ++ real_len = 15; ++ else ++ real_len = len; ++ + skb_reset_mac_header(skb); + skb_set_network_header(skb, skb->len); + +@@ -254,7 +270,7 @@ static struct sk_buff *qca8k_alloc_mdio_header(enum mdio_cmd cmd, u32 reg, u32 * + hdr |= FIELD_PREP(QCA_HDR_XMIT_CONTROL, QCA_HDR_XMIT_TYPE_RW_REG); + + mgmt_ethhdr->command = FIELD_PREP(QCA_HDR_MGMT_ADDR, reg); +- mgmt_ethhdr->command |= FIELD_PREP(QCA_HDR_MGMT_LENGTH, 4); ++ mgmt_ethhdr->command |= FIELD_PREP(QCA_HDR_MGMT_LENGTH, real_len); + mgmt_ethhdr->command |= FIELD_PREP(QCA_HDR_MGMT_CMD, cmd); + mgmt_ethhdr->command |= FIELD_PREP(QCA_HDR_MGMT_CHECK_CODE, + QCA_HDR_MGMT_CHECK_CODE_VAL); +@@ -264,7 +280,9 @@ static struct sk_buff *qca8k_alloc_mdio_header(enum mdio_cmd cmd, u32 reg, u32 * + + mgmt_ethhdr->hdr = htons(hdr); + +- skb_put_zero(skb, QCA_HDR_MGMT_DATA2_LEN + QCA_HDR_MGMT_PADDING_LEN); ++ data2 = skb_put_zero(skb, QCA_HDR_MGMT_DATA2_LEN + QCA_HDR_MGMT_PADDING_LEN); ++ if (cmd == MDIO_WRITE && len > QCA_HDR_MGMT_DATA1_LEN) ++ memcpy(data2, val + 1, len - QCA_HDR_MGMT_DATA1_LEN); + + return skb; + } +@@ -277,7 +295,7 @@ static void qca8k_mdio_header_fill_seq_num(struct sk_buff *skb, u32 seq_num) + mgmt_ethhdr->seq = FIELD_PREP(QCA_HDR_MGMT_SEQ_NUM, seq_num); + } + +-static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val) ++static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) + { + struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data; + struct sk_buff *skb; +@@ -285,7 +303,7 @@ static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val) + int ret; + + skb = qca8k_alloc_mdio_header(MDIO_READ, reg, NULL, +- QCA8K_ETHERNET_MDIO_PRIORITY); ++ QCA8K_ETHERNET_MDIO_PRIORITY, len); + if (!skb) + return -ENOMEM; + +@@ -313,6 +331,9 @@ static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val) + msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); + + *val = mgmt_eth_data->data[0]; ++ if (len > QCA_HDR_MGMT_DATA1_LEN) ++ memcpy(val + 1, mgmt_eth_data->data + 1, len - QCA_HDR_MGMT_DATA1_LEN); ++ + ack = mgmt_eth_data->ack; + + mutex_unlock(&mgmt_eth_data->mutex); +@@ -326,15 +347,15 @@ static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val) + return 0; + } + +-static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 val) ++static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) + { + struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data; + struct sk_buff *skb; + bool ack; + int ret; + +- skb = qca8k_alloc_mdio_header(MDIO_WRITE, reg, &val, +- QCA8K_ETHERNET_MDIO_PRIORITY); ++ skb = qca8k_alloc_mdio_header(MDIO_WRITE, reg, val, ++ QCA8K_ETHERNET_MDIO_PRIORITY, len); + if (!skb) + return -ENOMEM; + +@@ -380,14 +401,14 @@ qca8k_regmap_update_bits_eth(struct qca8k_priv *priv, u32 reg, u32 mask, u32 wri + u32 val = 0; + int ret; + +- ret = qca8k_read_eth(priv, reg, &val); ++ ret = qca8k_read_eth(priv, reg, &val, sizeof(val)); + if (ret) + return ret; + + val &= ~mask; + val |= write_val; + +- return qca8k_write_eth(priv, reg, val); ++ return qca8k_write_eth(priv, reg, &val, sizeof(val)); + } + + static int +@@ -398,7 +419,7 @@ qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) + u16 r1, r2, page; + int ret; + +- if (!qca8k_read_eth(priv, reg, val)) ++ if (!qca8k_read_eth(priv, reg, val, sizeof(val))) + return 0; + + qca8k_split_addr(reg, &r1, &r2, &page); +@@ -424,7 +445,7 @@ qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val) + u16 r1, r2, page; + int ret; + +- if (!qca8k_write_eth(priv, reg, val)) ++ if (!qca8k_write_eth(priv, reg, &val, sizeof(val))) + return 0; + + qca8k_split_addr(reg, &r1, &r2, &page); +@@ -959,21 +980,21 @@ qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy, + } + + /* Prealloc all the needed skb before the lock */ +- write_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, +- &write_val, QCA8K_ETHERNET_PHY_PRIORITY); ++ write_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &write_val, ++ QCA8K_ETHERNET_PHY_PRIORITY, sizeof(write_val)); + if (!write_skb) + return -ENOMEM; + +- clear_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, +- &clear_val, QCA8K_ETHERNET_PHY_PRIORITY); ++ clear_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &clear_val, ++ QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val)); + if (!write_skb) { + ret = -ENOMEM; + goto err_clear_skb; + } + +- read_skb = qca8k_alloc_mdio_header(MDIO_READ, QCA8K_MDIO_MASTER_CTRL, +- &clear_val, QCA8K_ETHERNET_PHY_PRIORITY); +- if (!write_skb) { ++ read_skb = qca8k_alloc_mdio_header(MDIO_READ, QCA8K_MDIO_MASTER_CTRL, &clear_val, ++ QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val)); ++ if (!read_skb) { + ret = -ENOMEM; + goto err_read_skb; + } +-- +2.34.1 + diff --git a/target/linux/generic/backport-5.15/766-16-net-dsa-qca8k-introduce-qca8k_bulk_read-write-functi.patch b/target/linux/generic/backport-5.15/766-16-net-dsa-qca8k-introduce-qca8k_bulk_read-write-functi.patch new file mode 100644 index 0000000000..ebd08845bc --- /dev/null +++ b/target/linux/generic/backport-5.15/766-16-net-dsa-qca8k-introduce-qca8k_bulk_read-write-functi.patch @@ -0,0 +1,109 @@ +From 4f3701fc599820568ba4395070d34e4248800fc0 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Wed, 2 Feb 2022 01:03:35 +0100 +Subject: [PATCH 16/16] net: dsa: qca8k: introduce qca8k_bulk_read/write + function + +Introduce qca8k_bulk_read/write() function to use mgmt Ethernet way to +read/write packet in bulk. Make use of this new function in the fdb +function and while at it reduce the reg for fdb_read from 4 to 3 as the +max bit for the ARL(fdb) table is 83 bits. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 55 ++++++++++++++++++++++++++++++++--------- + 1 file changed, 43 insertions(+), 12 deletions(-) + +diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c +index a1b76dcd2eb6..52ec2800dd89 100644 +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -411,6 +411,43 @@ qca8k_regmap_update_bits_eth(struct qca8k_priv *priv, u32 reg, u32 mask, u32 wri + return qca8k_write_eth(priv, reg, &val, sizeof(val)); + } + ++static int ++qca8k_bulk_read(struct qca8k_priv *priv, u32 reg, u32 *val, int len) ++{ ++ int i, count = len / sizeof(u32), ret; ++ ++ if (priv->mgmt_master && !qca8k_read_eth(priv, reg, val, len)) ++ return 0; ++ ++ for (i = 0; i < count; i++) { ++ ret = regmap_read(priv->regmap, reg + (i * 4), val + i); ++ if (ret < 0) ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int ++qca8k_bulk_write(struct qca8k_priv *priv, u32 reg, u32 *val, int len) ++{ ++ int i, count = len / sizeof(u32), ret; ++ u32 tmp; ++ ++ if (priv->mgmt_master && !qca8k_write_eth(priv, reg, val, len)) ++ return 0; ++ ++ for (i = 0; i < count; i++) { ++ tmp = val[i]; ++ ++ ret = regmap_write(priv->regmap, reg + (i * 4), tmp); ++ if (ret < 0) ++ return ret; ++ } ++ ++ return 0; ++} ++ + static int + qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val) + { +@@ -546,17 +583,13 @@ qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask) + static int + qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb) + { +- u32 reg[4], val; +- int i, ret; ++ u32 reg[3]; ++ int ret; + + /* load the ARL table into an array */ +- for (i = 0; i < 4; i++) { +- ret = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4), &val); +- if (ret < 0) +- return ret; +- +- reg[i] = val; +- } ++ ret = qca8k_bulk_read(priv, QCA8K_REG_ATU_DATA0, reg, sizeof(reg)); ++ if (ret) ++ return ret; + + /* vid - 83:72 */ + fdb->vid = FIELD_GET(QCA8K_ATU_VID_MASK, reg[2]); +@@ -580,7 +613,6 @@ qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask, const u8 *mac, + u8 aging) + { + u32 reg[3] = { 0 }; +- int i; + + /* vid - 83:72 */ + reg[2] = FIELD_PREP(QCA8K_ATU_VID_MASK, vid); +@@ -597,8 +629,7 @@ qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask, const u8 *mac, + reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR5_MASK, mac[5]); + + /* load the array into the ARL table */ +- for (i = 0; i < 3; i++) +- qca8k_write(priv, QCA8K_REG_ATU_DATA0 + (i * 4), reg[i]); ++ qca8k_bulk_write(priv, QCA8K_REG_ATU_DATA0, reg, sizeof(reg)); + } + + static int +-- +2.34.1 +