From: Jaehoon Chung Date: Fri, 14 Feb 2014 12:27:09 +0000 (+0100) Subject: mmc: core: Add DT bindings for eMMC HS200 1.8/1.2V X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=321bd41de1580f953c637de0fd81e06fcba8b3e8;p=openwrt%2Fstaging%2Fblogic.git mmc: core: Add DT bindings for eMMC HS200 1.8/1.2V Provide the option to configure these speed modes per host, for those host driver's that can't distinguish this in runtime. Signed-off-by: Jaehoon Chung Acked-by: Ulf Hansson Signed-off-by: Chris Ball --- diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 519d9523a413..9dce540771fb 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -36,6 +36,8 @@ Optional properties: - full-pwr-cycle: full power cycle of the card is supported - mmc-highspeed-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported - mmc-highspeed-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported +- mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported +- mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index d014127f1043..453573d5ab08 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -443,6 +443,10 @@ int mmc_of_parse(struct mmc_host *host) host->caps |= MMC_CAP_1_8V_DDR; if (of_find_property(np, "mmc-ddr-1_2v", &len)) host->caps |= MMC_CAP_1_2V_DDR; + if (of_find_property(np, "mmc-hs200-1_8v", &len)) + host->caps2 |= MMC_CAP2_HS200_1_8V_SDR; + if (of_find_property(np, "mmc-hs200-1_2v", &len)) + host->caps2 |= MMC_CAP2_HS200_1_2V_SDR; return 0;