From: Lech Perczak Date: Thu, 16 Nov 2023 16:30:11 +0000 (+0100) Subject: ath79: fortinet-fap-221-b: convert to nvmem-layout X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=32098554d911f092b9779e4768bf6d819d850bb5;p=openwrt%2Fstaging%2Fthess.git ath79: fortinet-fap-221-b: convert to nvmem-layout Now that MAC address parser supports the hex format (without delimiters), use the canonical MAC address stored in U-boot partition. Get rid of the userspace adjustments which are no longer necessary. While at that, move the mac-base to the common part, as it is again exactly the same in both models. And convert ART partition too - keep that one separate, as calibration data length differs between the models. Signed-off-by: Lech Perczak --- diff --git a/target/linux/ath79/dts/ar9344_fortinet_fap-221-b.dts b/target/linux/ath79/dts/ar9344_fortinet_fap-221-b.dts index b78a588f5c..0cad9b76d1 100644 --- a/target/linux/ath79/dts/ar9344_fortinet_fap-221-b.dts +++ b/target/linux/ath79/dts/ar9344_fortinet_fap-221-b.dts @@ -6,6 +6,10 @@ compatible = "fortinet,fap-221-b", "qca,ar9344"; model = "Fortinet FAP-221-B"; + aliases { + label-mac-device = <ð0>; + }; + leds { compatible = "gpio-leds"; @@ -51,25 +55,34 @@ &ath9k { ieee80211-freq-limit = <2402000 2482000>; - nvmem-cells = <&calibration_pcie>; - nvmem-cell-names = "calibration"; + nvmem-cells = <&calibration_pcie>, <&macaddr_uboot_3ff80 8>; + nvmem-cell-names = "calibration", "mac-address"; +}; + +ð0 { + nvmem-cells = <&macaddr_uboot_3ff80 0>; + nvmem-cell-names = "mac-address"; }; &wmac { ieee80211-freq-limit = <2402000 2482000 4900000 5990000>; - nvmem-cells = <&calibration_wmac>; - nvmem-cell-names = "calibration"; + nvmem-cells = <&calibration_wmac>, <&macaddr_uboot_3ff80 1>; + nvmem-cell-names = "calibration", "mac-address"; }; &art { - compatible = "nvmem-cells"; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; - calibration_wmac: calibration@1000 { - reg = <0x1000 0x440>; - }; + calibration_wmac: calibration@1000 { + reg = <0x1000 0x440>; + }; - calibration_pcie: calibration@5000 { - reg = <0x5000 0x440>; + calibration_pcie: calibration@5000 { + reg = <0x5000 0x440>; + }; }; }; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index cdea3b5f67..b74a7ff6b4 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -726,10 +726,6 @@ ath79_setup_macs() enterasys,ws-ap3705i) label_mac=$(mtd_get_mac_ascii u-boot-env0 ethaddr) ;; - fortinet,fap-221-b) - lan_mac=$(mtd_get_mac_text u-boot 0x3ff80 12) - label_mac=$lan_mac - ;; hak5,lan-turtle|\ hak5,packet-squirrel) label_mac=$(mtd_get_mac_binary u-boot 0x1fc00) diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index ccff35e5c6..42b69d2ca0 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -47,9 +47,6 @@ case "$board" in engenius,esr900) macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" "$PHYNBR" > /sys${DEVPATH}/macaddress ;; - fortinet,fap-221-b) - macaddr_add "$(mtd_get_mac_text u-boot 0x3ff80 12)" $((PHYNBR*7+1)) > /sys${DEVPATH}/macaddress - ;; iodata,wn-ac1600dgr) # There is no eeprom data for 5 GHz wlan in "art" partition # which would allow to patch the macaddress diff --git a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh index 8b39a17eb0..76f4b93a35 100644 --- a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh +++ b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh @@ -25,9 +25,6 @@ preinit_set_mac_address() { siemens,ws-ap3610) ip link set dev eth0 address $(mtd_get_mac_ascii cfg1 ethaddr) ;; - fortinet,fap-221-b) - ip link set dev eth0 address $(mtd_get_mac_text u-boot 0x3ff80 12) - ;; moxa,awk-1137c) ip link set dev eth0 address $(mtd_get_mac_ascii u-boot-env mac_addr) ;;