From: Florian Fainelli <florian@openwrt.org>
Date: Mon, 27 Jul 2009 13:00:23 +0000 (+0000)
Subject: add support for the WRT160N, patch from Westley Paynter
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=31fbb89034e3898dbeb8e85662bef9503f76fd65;p=openwrt%2Fstaging%2Fjow.git

add support for the WRT160N, patch from Westley Paynter

SVN-Revision: 17031
---

diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index 834a83abdc..ca08e46fd8 100644
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -60,6 +60,7 @@ enum {
 	WRT54G,
 	WRTSL54GS,
 	WRT54G3G,
+	WRT160N,
 	WRT350N,
 	WRT600N,
 	WRT600NV11,
@@ -241,6 +242,18 @@ static struct platform_t __initdata platforms[] = {
 			{ .name = "3g_blink",	.gpio = 1 << 5, .polarity = NORMAL },
 		},
 	},
+	[WRT160N] = {
+		.name		= "Linksys WRT160N",
+		.buttons	= {
+			{ .name = "reset",	.gpio = 1 << 6 },
+			{ .name = "ses",	.gpio = 1 << 4 },
+		},
+		.leds		= {
+			{ .name = "power",	.gpio = 1 << 1, .polarity = NORMAL },
+			{ .name = "ses_blue",	.gpio = 1 << 5, .polarity = REVERSE },
+			{ .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
+		},
+	},
 	[WRT350N] = {
 		.name		= "Linksys WRT350N",
 		.buttons	= {
@@ -862,6 +875,9 @@ static struct platform_t __init *platform_detect(void)
 			if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1"))
 				return &platforms[WRTSL54GS];
 
+			if (!strcmp(boardtype, "0x0472"))
+				return &platforms[WRT160N];
+
 			/* default to WRT54G */
 			return &platforms[WRT54G];
 		}
diff --git a/target/linux/brcm-2.4/config-default b/target/linux/brcm-2.4/config-default
index 3d401f06e1..ca963df4f4 100644
--- a/target/linux/brcm-2.4/config-default
+++ b/target/linux/brcm-2.4/config-default
@@ -160,6 +160,7 @@ CONFIG_MKISS=m
 CONFIG_MSDOS_FS=m
 CONFIG_MTD_BCM947XX=y
 CONFIG_MTD_CFI_SSTSTD=y
+CONFIG_MTD_CFI_B1=y
 CONFIG_MTD_SFLASH=y
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set