From: Jean Delvare Date: Thu, 28 Jul 2011 20:48:42 +0000 (-0700) Subject: thermal: make THERMAL_HWMON implementation fully internal X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=31f5396ad3bde23c8416e8d23ba425e27f413314;p=openwrt%2Fstaging%2Fblogic.git thermal: make THERMAL_HWMON implementation fully internal THERMAL_HWMON is implemented inside the thermal_sys driver and has no effect on drivers implementing thermal zones, so they shouldn't see anything related to it in . Making the THERMAL_HWMON implementation fully internal has two advantages beyond the cleaner design: * This avoids rebuilding all thermal drivers if the THERMAL_HWMON implementation changes, or if CONFIG_THERMAL_HWMON gets enabled or disabled. * This avoids breaking the thermal kABI in these cases too, which should make distributions happy. The only drawback I can see is slightly higher memory fragmentation, as the number of kzalloc() calls will increase by one per thermal zone. But I doubt it will be a problem in practice, as I've never seen a system with more than two thermal zones. Signed-off-by: Jean Delvare Cc: Rene Herman Acked-by: Guenter Roeck Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index b6353d61fac5..708f8e92771a 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -420,6 +420,29 @@ thermal_cooling_device_trip_point_show(struct device *dev, /* hwmon sys I/F */ #include + +/* thermal zone devices with the same type share one hwmon device */ +struct thermal_hwmon_device { + char type[THERMAL_NAME_LENGTH]; + struct device *device; + int count; + struct list_head tz_list; + struct list_head node; +}; + +struct thermal_hwmon_attr { + struct device_attribute attr; + char name[16]; +}; + +/* one temperature input for each thermal zone */ +struct thermal_hwmon_temp { + struct list_head hwmon_node; + struct thermal_zone_device *tz; + struct thermal_hwmon_attr temp_input; /* hwmon sys attr */ + struct thermal_hwmon_attr temp_crit; /* hwmon sys attr */ +}; + static LIST_HEAD(thermal_hwmon_list); static ssize_t @@ -437,9 +460,10 @@ temp_input_show(struct device *dev, struct device_attribute *attr, char *buf) int ret; struct thermal_hwmon_attr *hwmon_attr = container_of(attr, struct thermal_hwmon_attr, attr); - struct thermal_zone_device *tz - = container_of(hwmon_attr, struct thermal_zone_device, + struct thermal_hwmon_temp *temp + = container_of(hwmon_attr, struct thermal_hwmon_temp, temp_input); + struct thermal_zone_device *tz = temp->tz; ret = tz->ops->get_temp(tz, &temperature); @@ -455,9 +479,10 @@ temp_crit_show(struct device *dev, struct device_attribute *attr, { struct thermal_hwmon_attr *hwmon_attr = container_of(attr, struct thermal_hwmon_attr, attr); - struct thermal_zone_device *tz - = container_of(hwmon_attr, struct thermal_zone_device, + struct thermal_hwmon_temp *temp + = container_of(hwmon_attr, struct thermal_hwmon_temp, temp_crit); + struct thermal_zone_device *tz = temp->tz; long temperature; int ret; @@ -485,10 +510,29 @@ thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz) return NULL; } +/* Find the temperature input matching a given thermal zone */ +static struct thermal_hwmon_temp * +thermal_hwmon_lookup_temp(const struct thermal_hwmon_device *hwmon, + const struct thermal_zone_device *tz) +{ + struct thermal_hwmon_temp *temp; + + mutex_lock(&thermal_list_lock); + list_for_each_entry(temp, &hwmon->tz_list, hwmon_node) + if (temp->tz == tz) { + mutex_unlock(&thermal_list_lock); + return temp; + } + mutex_unlock(&thermal_list_lock); + + return NULL; +} + static int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) { struct thermal_hwmon_device *hwmon; + struct thermal_hwmon_temp *temp; int new_hwmon_device = 1; int result; @@ -515,30 +559,36 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) goto free_mem; register_sys_interface: - tz->hwmon = hwmon; + temp = kzalloc(sizeof(struct thermal_hwmon_temp), GFP_KERNEL); + if (!temp) { + result = -ENOMEM; + goto unregister_name; + } + + temp->tz = tz; hwmon->count++; - snprintf(tz->temp_input.name, THERMAL_NAME_LENGTH, + snprintf(temp->temp_input.name, THERMAL_NAME_LENGTH, "temp%d_input", hwmon->count); - tz->temp_input.attr.attr.name = tz->temp_input.name; - tz->temp_input.attr.attr.mode = 0444; - tz->temp_input.attr.show = temp_input_show; - sysfs_attr_init(&tz->temp_input.attr.attr); - result = device_create_file(hwmon->device, &tz->temp_input.attr); + temp->temp_input.attr.attr.name = temp->temp_input.name; + temp->temp_input.attr.attr.mode = 0444; + temp->temp_input.attr.show = temp_input_show; + sysfs_attr_init(&temp->temp_input.attr.attr); + result = device_create_file(hwmon->device, &temp->temp_input.attr); if (result) - goto unregister_name; + goto free_temp_mem; if (tz->ops->get_crit_temp) { unsigned long temperature; if (!tz->ops->get_crit_temp(tz, &temperature)) { - snprintf(tz->temp_crit.name, THERMAL_NAME_LENGTH, + snprintf(temp->temp_crit.name, THERMAL_NAME_LENGTH, "temp%d_crit", hwmon->count); - tz->temp_crit.attr.attr.name = tz->temp_crit.name; - tz->temp_crit.attr.attr.mode = 0444; - tz->temp_crit.attr.show = temp_crit_show; - sysfs_attr_init(&tz->temp_crit.attr.attr); + temp->temp_crit.attr.attr.name = temp->temp_crit.name; + temp->temp_crit.attr.attr.mode = 0444; + temp->temp_crit.attr.show = temp_crit_show; + sysfs_attr_init(&temp->temp_crit.attr.attr); result = device_create_file(hwmon->device, - &tz->temp_crit.attr); + &temp->temp_crit.attr); if (result) goto unregister_input; } @@ -547,13 +597,15 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) mutex_lock(&thermal_list_lock); if (new_hwmon_device) list_add_tail(&hwmon->node, &thermal_hwmon_list); - list_add_tail(&tz->hwmon_node, &hwmon->tz_list); + list_add_tail(&temp->hwmon_node, &hwmon->tz_list); mutex_unlock(&thermal_list_lock); return 0; unregister_input: - device_remove_file(hwmon->device, &tz->temp_input.attr); + device_remove_file(hwmon->device, &temp->temp_input.attr); + free_temp_mem: + kfree(temp); unregister_name: if (new_hwmon_device) { device_remove_file(hwmon->device, &dev_attr_name); @@ -569,15 +621,30 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) static void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) { - struct thermal_hwmon_device *hwmon = tz->hwmon; + struct thermal_hwmon_device *hwmon; + struct thermal_hwmon_temp *temp; + + hwmon = thermal_hwmon_lookup_by_type(tz); + if (unlikely(!hwmon)) { + /* Should never happen... */ + dev_dbg(&tz->device, "hwmon device lookup failed!\n"); + return; + } + + temp = thermal_hwmon_lookup_temp(hwmon, tz); + if (unlikely(!temp)) { + /* Should never happen... */ + dev_dbg(&tz->device, "temperature input lookup failed!\n"); + return; + } - tz->hwmon = NULL; - device_remove_file(hwmon->device, &tz->temp_input.attr); + device_remove_file(hwmon->device, &temp->temp_input.attr); if (tz->ops->get_crit_temp) - device_remove_file(hwmon->device, &tz->temp_crit.attr); + device_remove_file(hwmon->device, &temp->temp_crit.attr); mutex_lock(&thermal_list_lock); - list_del(&tz->hwmon_node); + list_del(&temp->hwmon_node); + kfree(temp); if (!list_empty(&hwmon->tz_list)) { mutex_unlock(&thermal_list_lock); return; diff --git a/include/linux/thermal.h b/include/linux/thermal.h index d3ec89fb4122..47b4a27e6e97 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -85,22 +85,6 @@ struct thermal_cooling_device { ((long)t-2732+5)/10 : ((long)t-2732-5)/10) #define CELSIUS_TO_KELVIN(t) ((t)*10+2732) -#if defined(CONFIG_THERMAL_HWMON) -/* thermal zone devices with the same type share one hwmon device */ -struct thermal_hwmon_device { - char type[THERMAL_NAME_LENGTH]; - struct device *device; - int count; - struct list_head tz_list; - struct list_head node; -}; - -struct thermal_hwmon_attr { - struct device_attribute attr; - char name[16]; -}; -#endif - struct thermal_zone_device { int id; char type[THERMAL_NAME_LENGTH]; @@ -120,12 +104,6 @@ struct thermal_zone_device { struct mutex lock; /* protect cooling devices list */ struct list_head node; struct delayed_work poll_queue; -#if defined(CONFIG_THERMAL_HWMON) - struct list_head hwmon_node; - struct thermal_hwmon_device *hwmon; - struct thermal_hwmon_attr temp_input; /* hwmon sys attr */ - struct thermal_hwmon_attr temp_crit; /* hwmon sys attr */ -#endif }; /* Adding event notification support elements */ #define THERMAL_GENL_FAMILY_NAME "thermal_event"