From: Josef Schlehofer Date: Thu, 17 Mar 2022 17:49:57 +0000 (+0100) Subject: bcm27xx: bcm2711: add kmod-usb-net-lan78xx X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=31ccc27f41f6844f91728c7448d6ca0a0d0ae5b5;p=openwrt%2Fstaging%2Fmans0n.git bcm27xx: bcm2711: add kmod-usb-net-lan78xx Some vendors like Seeedstudio in their product [1] with Raspberry Pi Compute Module 4 uses Microchip LAN7800 (USB 3.0 to Gigabit Ethernet Bridge) - USB 3.0 extended from PCIe of CM4. lsusb output: ``` Bus 002 Device 002: ID 0424:7800 Microchip LAN7800 ``` Raspberry Pi 4 and even Compute Module 4 has many resources available and for just one kernel module it is not necessary to add additional specific CM4 profiles. Let's include it by default, so the both Ethernet ports will be usable to have better user-experience. Because previous generation of Raspberry Pi included LAN7800 Gigabit Ethernet by default and it is enabled there [2] in kernel without additional kernel module, which was added recently [3]. After this commit in dmesg can be found this: ``` root@OpenWrt:~# dmesg | grep lan [ 7.038889] lan78xx 2-3:1.0 (unnamed net_device) (uninitialized): int urb period 64 [ 7.090484] usbcore: registered new interface driver lan78xx ``` Tested and works with sysupgrade image. [1] https://www.seeedstudio.com/Dual-GbE-Carrier-Board-with-4GB-RAM-32GB-eMMC-RPi-CM4-Case-p-5029.html [2] https://github.com/openwrt/openwrt/blob/32c74552b2310531af593ee0f859a3935a3a7cbd/target/linux/bcm27xx/bcm2709/config-5.4#L437 [3] https://github.com/openwrt/openwrt/commit/31647d8be8c60bfb6690c87c739b8abe6dc03950 Signed-off-by: Josef Schlehofer --- diff --git a/target/linux/bcm27xx/image/Makefile b/target/linux/bcm27xx/image/Makefile index f0c3ae1272..83d255f326 100644 --- a/target/linux/bcm27xx/image/Makefile +++ b/target/linux/bcm27xx/image/Makefile @@ -158,7 +158,8 @@ define Device/rpi-4 DEVICE_PACKAGES := \ cypress-firmware-43455-sdio \ cypress-nvram-43455-sdio-rpi-4b \ - kmod-brcmfmac wpad-basic-wolfssl + kmod-brcmfmac wpad-basic-wolfssl \ + kmod-usb-net-lan78xx IMAGE/sysupgrade.img.gz := boot-common | boot-2711 | sdcard-img | gzip | append-metadata IMAGE/factory.img.gz := boot-common | boot-2711 | sdcard-img | gzip endef