From: Luo chongjun Date: Fri, 25 May 2018 10:06:37 +0000 (+0800) Subject: ar71xx: add support for GL.iNet GL-AR750S X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=312d7a4a5aaac8df714da5ad25d8b83a09c9e68c;p=openwrt%2Fstaging%2Fjow.git ar71xx: add support for GL.iNet GL-AR750S This patch adds supports for GL-AR750S. Specification: - SOC: QCA9563 (775MHz) - Flash: 16 MiB (W25Q128FVSG) - RAM: 128 MiB DDR2 - Ethernet: 2x 1Gbps LAN + 1x 1Gbps WAN - Wireless: 2.4GHz (bgn) and 5GHz (ac) - USB: 1x USB 2.0 port - Button: 1x switch button, 1x reset button - LED: 3x LEDS (green) Flash instruction: Apply factory image via web-gui. Signed-off-by: Luo chongjun --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 52f1ac3ecf..f436854384 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -385,6 +385,10 @@ gl-ar750) ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:white:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:white:wlan5g" "phy0tpt" ;; +gl-ar750s) + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" + ;; gl-mifi) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index a8b243b310..47153d9481 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -433,6 +433,10 @@ ar71xx_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth1" "1:lan" "2:lan" ;; + gl-ar750s) + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan:2" "3:lan:1" "1:wan" + ;; jwap230) ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2" ucidef_add_switch "switch0" \ diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 5d01701aa8..f82026c7ad 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -99,6 +99,7 @@ case "$FIRMWARE" in ath10kcal_extract "caldata" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; + gl-ar750s|\ gl-ar750|\ tl-wpa8630) ath10kcal_extract "art" 20480 2116 diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 0fe778d9ff..c64520d6f2 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -727,6 +727,9 @@ ar71xx_board_detect() { *"GL-AR750") name="gl-ar750" ;; + *"GL-AR750S") + name="gl-ar750s" + ;; *"GL-CONNECT INET v1") name="gl-inet" diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index eae7382af7..b3342e3feb 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -260,6 +260,7 @@ platform_check_image() { gl-ar300m|\ gl-ar300|\ gl-ar750|\ + gl-ar750s|\ gl-domino|\ gl-mifi|\ gl-usb150|\ diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index 94858ddbba..9eae158ebe 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -120,6 +120,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_GL_AR300 is not set # CONFIG_ATH79_MACH_GL_AR300M is not set # CONFIG_ATH79_MACH_GL_AR750 is not set +# CONFIG_ATH79_MACH_GL_AR750S is not set # CONFIG_ATH79_MACH_GL_DOMINO is not set # CONFIG_ATH79_MACH_GL_INET is not set # CONFIG_ATH79_MACH_GL_MIFI is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 74da7418e2..7400f2c86d 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -814,6 +814,17 @@ config ATH79_MACH_GL_AR750 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_GL_AR750S + bool "GL.iNet GL-AR750S support" + select SOC_QCA956X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_GL_DOMINO bool "DOMINO support" select SOC_AR933X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 898853e5c0..b6c77b2029 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -130,6 +130,7 @@ obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o obj-$(CONFIG_ATH79_MACH_GL_AR750) += mach-gl-ar750.o +obj-$(CONFIG_ATH79_MACH_GL_AR750S) += mach-gl-ar750s.o obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o obj-$(CONFIG_ATH79_MACH_GL_MIFI) += mach-gl-mifi.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750s.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750s.c new file mode 100755 index 0000000000..b556f9b0be --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750s.c @@ -0,0 +1,193 @@ +/* + * GL.iNet GL-AR750S board support + * + * Copyright (C) 2018 luochongjun + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include +#include + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-spi.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "dev-usb.h" +#include "machtypes.h" + + +#define GL_AR750S_KEYS_POLL_INTERVAL 20 +#define GL_AR750S_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR750S_KEYS_POLL_INTERVAL) + + +#define GL_AR750S_GPIO_LED_WLAN2G 19 +#define GL_AR750S_GPIO_LED_WLAN5G 20 +#define GL_AR750S_GPIO_LED_POWER 1 +#define GL_AR750S_GPIO_USB_POWER 7 + +#define GL_AR750S_GPIO_BTN_RESET 2 +#define GL_AR750S_GPIO_BTN_RIGHT 8 + +#define GL_AR750S_MAC0_OFFSET 0x0000 +#define GL_AR750S_WMAC_CALDATA_OFFSET 0x1000 +#define GL_AR750S_PCI_CALDATA_OFFSET 0x5000 + +#define GL_AR750S_GPIO_I2C_SDA 5 +#define GL_AR750S_GPIO_I2C_SCL 21 + + + +static struct spi_board_info gl_ar750s_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + .platform_data = NULL, + }, +}; + +static struct ath79_spi_platform_data gl_ar750s_spi_data = { + .bus_num = 0, + .num_chipselect = 2, +}; + +static struct gpio_led gl_ar750s_leds_gpio[] __initdata = { + { + .name = "gl-ar750s:green:power", + .gpio = GL_AR750S_GPIO_LED_POWER, + .default_state = LEDS_GPIO_DEFSTATE_KEEP, + .active_low = 1, + },{ + .name = "gl-ar750s:green:usbpower", + .gpio = GL_AR750S_GPIO_USB_POWER, + .active_low = 1, + },{ + .name = "gl-ar750s:green:wlan2g", + .gpio = GL_AR750S_GPIO_LED_WLAN2G, + .active_low = 1, + },{ + .name = "gl-ar750s:green:wlan5g", + .gpio = GL_AR750S_GPIO_LED_WLAN5G, + .active_low = 0, + } +}; + +static struct gpio_keys_button gl_ar750s_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = GL_AR750S_KEYS_DEBOUNCE_INTERVAL, + .gpio = GL_AR750S_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "right", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = GL_AR750S_KEYS_DEBOUNCE_INTERVAL, + .gpio = GL_AR750S_GPIO_BTN_RIGHT, + .active_low = 1, + }, +}; + +static struct i2c_gpio_platform_data gl_ar750s_i2c_gpio_data = { + .sda_pin = GL_AR750S_GPIO_I2C_SDA, + .scl_pin = GL_AR750S_GPIO_I2C_SCL, +}; + +static struct platform_device gl_ar750s_i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &gl_ar750s_i2c_gpio_data, + } + +}; + +static struct ar8327_pad_cfg gl_ar750s_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_SGMII, + .sgmii_delay_en = true, +}; + +static struct ar8327_platform_data gl_ar750s_ar8327_data = { + .pad0_cfg = &gl_ar750s_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + + +static struct mdio_board_info gl_ar750s_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &gl_ar750s_ar8327_data, + }, +}; + +static void __init gl_ar750s_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1f050000); + + ath79_register_spi(&gl_ar750s_spi_data, gl_ar750s_spi_info, 1); + + ath79_init_mac(ath79_eth0_data.mac_addr, + eeprom + GL_AR750S_MAC0_OFFSET, 0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_data.phy_mask = BIT(0); + + mdiobus_register_board_info(gl_ar750s_mdio0_info, + ARRAY_SIZE(gl_ar750s_mdio0_info)); + + ath79_register_mdio(0, 0x00); + ath79_register_eth(0); + + + ath79_register_usb(); + + + ath79_register_wmac(eeprom + GL_AR750S_WMAC_CALDATA_OFFSET, NULL); + + + ap91_pci_init(eeprom + GL_AR750S_PCI_CALDATA_OFFSET, NULL); + + platform_device_register(&gl_ar750s_i2c_gpio_device); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar750s_leds_gpio), + gl_ar750s_leds_gpio); + + ath79_register_gpio_keys_polled(-1, GL_AR750S_KEYS_POLL_INTERVAL, + ARRAY_SIZE(gl_ar750s_gpio_keys), + gl_ar750s_gpio_keys); +} + + +MIPS_MACHINE(ATH79_MACH_GL_AR750S, "GL-AR750S", "GL-AR750S", + gl_ar750s_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 0d0d309ce8..1457d8b347 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -125,6 +125,7 @@ enum ath79_mach_type { ATH79_MACH_GL_AR300, /* GL-AR300 */ ATH79_MACH_GL_AR300M, /* GL-AR300M */ ATH79_MACH_GL_AR750, /* GL.iNet GL-AR750 */ + ATH79_MACH_GL_AR750S, /* GL.iNet GL-AR750S */ ATH79_MACH_GL_DOMINO, /* Domino */ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ ATH79_MACH_GL_MIFI, /* GL-MIFI support */ diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default index c85453af93..53281c1250 100644 --- a/target/linux/ar71xx/generic/config-default +++ b/target/linux/ar71xx/generic/config-default @@ -93,6 +93,7 @@ CONFIG_ATH79_MACH_GL_AR150=y CONFIG_ATH79_MACH_GL_AR300=y CONFIG_ATH79_MACH_GL_AR300M=y CONFIG_ATH79_MACH_GL_AR750=y +CONFIG_ATH79_MACH_GL_AR750S=y CONFIG_ATH79_MACH_GL_DOMINO=y CONFIG_ATH79_MACH_GL_INET=y CONFIG_ATH79_MACH_GL_MIFI=y diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index bceeba0009..e57f8a2731 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -461,6 +461,19 @@ define Device/gl-ar750 endef TARGET_DEVICES += gl-ar750 +define Device/gl-ar750s + DEVICE_TITLE := GL.iNet GL-AR750S + DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887 kmod-usb-core \ + kmod-usb2 kmod-usb-storage + BOARDNAME := GL-AR750S + SUPPORTED_DEVICES := gl-ar750s + IMAGE_SIZE := 16000k + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += gl-ar750s + define Device/gl-domino DEVICE_TITLE := GL.iNet Domino Pi DEVICE_PACKAGES := kmod-usb-core kmod-usb2