From: Daniel Golle <daniel@makrotopia.org>
Date: Sun, 21 Mar 2021 13:32:46 +0000 (+0000)
Subject: mediatek: linksys-e8450: remove left-overs from dtsi
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=310b7f76e8dad4255efa7510c589b2c3f36af3f5;p=openwrt%2Fstaging%2Fblocktrron.git

mediatek: linksys-e8450: remove left-overs from dtsi

There is an ASMedia ASM1480 PCIe switch found on mt7622-rfb1 and the
BPi-R64, allowing the user to switch between SATA and PCIe1 which share
the same pins on the SoC.
This chip is not present on the Linksys E8450, it doesn't have SATA.
Remove definitions for GPIO90 from DTSI to prevent it from being
copy&pasted or otherwise causing confusion.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---

diff --git a/target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi b/target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi
index 23c1d183c8..1e367d408f 100644
--- a/target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi
+++ b/target/linux/mediatek/dts/mt7622-linksys-e8450.dtsi
@@ -210,15 +210,6 @@
 };
 
 &pio {
-	/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
-	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
-	 */
-//	asm_sel {
-//		gpio-hog;
-//		gpios = <90 GPIO_ACTIVE_HIGH>;
-//		output-high;
-//	};
-
 	eth_pins: eth-pins {
 		mux {
 			function = "eth";