From: Kevin Fang Date: Mon, 11 Jul 2011 09:14:13 +0000 (+0800) Subject: ath6kl: Add beginning of AR6004 initialisation support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=31024d99003486c90c793dea58b55f7920f0488b;p=openwrt%2Fstaging%2Fblogic.git ath6kl: Add beginning of AR6004 initialisation support Support isn't complete yet. Signed-off-by: Kevin Fang Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath6kl/bmi.h b/drivers/net/wireless/ath/ath6kl/bmi.h index 83546d76d979..96851d5df24b 100644 --- a/drivers/net/wireless/ath/ath6kl/bmi.h +++ b/drivers/net/wireless/ath/ath6kl/bmi.h @@ -139,8 +139,8 @@ */ #define TARGET_VERSION_SENTINAL 0xffffffff -#define TARGET_TYPE_AR6003 3 - +#define TARGET_TYPE_AR6003 3 +#define TARGET_TYPE_AR6004 5 #define BMI_ROMPATCH_INSTALL 9 /* * Semantics: Install a ROM Patch. diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h index 74170229523f..214d1144b9bf 100644 --- a/drivers/net/wireless/ath/ath6kl/core.h +++ b/drivers/net/wireless/ath/ath6kl/core.h @@ -74,6 +74,13 @@ #define AR6003_REV3_DEFAULT_BOARD_DATA_FILE \ "ath6k/AR6003/hw2.1.1/bdata.SD31.bin" +/* AR6004 1.0 definitions */ +#define AR6004_REV1_VERSION 0x30000623 +#define AR6004_REV1_FIRMWARE_FILE "ath6k/AR6004/hw6.1/fw.ram.bin" +#define AR6004_REV1_BOARD_DATA_FILE "ath6k/AR6004/hw6.1/bdata.bin" +#define AR6004_REV1_DEFAULT_BOARD_DATA_FILE "ath6k/AR6004/hw6.1/bdata.DB132.bin" +#define AR6004_REV1_EPPING_FIRMWARE_FILE "ath6k/AR6004/hw6.1/endpointping.bin" + /* Per STA data, used in AP mode */ #define STA_PS_AWAKE BIT(0) #define STA_PS_SLEEP BIT(1) diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c index 9d10322eac41..df15bfad6043 100644 --- a/drivers/net/wireless/ath/ath6kl/init.c +++ b/drivers/net/wireless/ath/ath6kl/init.c @@ -114,7 +114,9 @@ static inline u32 ath6kl_get_hi_item_addr(struct ath6kl *ar, u32 addr = 0; if (ar->target_type == TARGET_TYPE_AR6003) - addr = ATH6KL_HI_START_ADDR + item_offset; + addr = ATH6KL_AR6003_HI_START_ADDR + item_offset; + else if (ar->target_type == TARGET_TYPE_AR6004) + addr = ATH6KL_AR6004_HI_START_ADDR + item_offset; return addr; } @@ -127,12 +129,12 @@ static int ath6kl_set_host_app_area(struct ath6kl *ar) /* Fetch the address of the host_app_area_s * instance in the host interest area */ address = ath6kl_get_hi_item_addr(ar, HI_ITEM(hi_app_host_interest)); - address = TARG_VTOP(address); + address = TARG_VTOP(ar->target_type, address); if (ath6kl_read_reg_diag(ar, &address, &data)) return -EIO; - address = TARG_VTOP(data); + address = TARG_VTOP(ar->target_type, data); host_app_area.wmi_protocol_ver = WMI_PROTOCOL_VERSION; if (ath6kl_access_datadiag(ar, address, (u8 *)&host_app_area, @@ -370,7 +372,7 @@ static void ath6kl_dump_target_assert_info(struct ath6kl *ar) /* the reg dump pointer is copied to the host interest area */ address = ath6kl_get_hi_item_addr(ar, HI_ITEM(hi_failure_state)); - address = TARG_VTOP(address); + address = TARG_VTOP(ar->target_type, address); /* read RAM location through diagnostic window */ status = ath6kl_read_reg_diag(ar, &address, ®dump_loc); @@ -382,8 +384,7 @@ static void ath6kl_dump_target_assert_info(struct ath6kl *ar) ath6kl_dbg(ATH6KL_DBG_TRC, "location of register dump data: 0x%X\n", regdump_loc); - - regdump_loc = TARG_VTOP(regdump_loc); + regdump_loc = TARG_VTOP(ar->target_type, regdump_loc); /* fetch register dump data */ status = ath6kl_access_datadiag(ar, @@ -518,10 +519,14 @@ int ath6kl_configure_target(struct ath6kl *ar) * but possible in theory. */ - if (ar->target_type == TARGET_TYPE_AR6003) { + if (ar->target_type == TARGET_TYPE_AR6003 || + ar->target_type == TARGET_TYPE_AR6004) { if (ar->version.target_ver == AR6003_REV2_VERSION) { param = AR6003_REV2_BOARD_EXT_DATA_ADDRESS; ram_reserved_size = AR6003_REV2_RAM_RESERVE_SIZE; + } else if (ar->version.target_ver == AR6004_REV1_VERSION) { + param = AR6004_REV1_BOARD_EXT_DATA_ADDRESS; + ram_reserved_size = AR6004_REV1_RAM_RESERVE_SIZE; } else { param = AR6003_REV3_BOARD_EXT_DATA_ADDRESS; ram_reserved_size = AR6003_REV3_RAM_RESERVE_SIZE; @@ -614,7 +619,8 @@ int ath6kl_unavail_ev(struct ath6kl *ar) static u32 ath6kl_get_load_address(u32 target_ver, enum addr_type type) { WARN_ON(target_ver != AR6003_REV2_VERSION && - target_ver != AR6003_REV3_VERSION); + target_ver != AR6003_REV3_VERSION && + target_ver != AR6004_REV1_VERSION); switch (type) { case DATASET_PATCH_ADDR: @@ -664,6 +670,9 @@ static int ath6kl_fetch_board_file(struct ath6kl *ar) case AR6003_REV2_VERSION: filename = AR6003_REV2_BOARD_DATA_FILE; break; + case AR6004_REV1_VERSION: + filename = AR6004_REV1_BOARD_DATA_FILE; + break; default: filename = AR6003_REV3_BOARD_DATA_FILE; break; @@ -684,6 +693,9 @@ static int ath6kl_fetch_board_file(struct ath6kl *ar) case AR6003_REV2_VERSION: filename = AR6003_REV2_DEFAULT_BOARD_DATA_FILE; break; + case AR6004_REV1_VERSION: + filename = AR6004_REV1_DEFAULT_BOARD_DATA_FILE; + break; default: filename = AR6003_REV3_DEFAULT_BOARD_DATA_FILE; break; @@ -707,6 +719,7 @@ static int ath6kl_fetch_board_file(struct ath6kl *ar) static int ath6kl_upload_board_file(struct ath6kl *ar) { u32 board_address, board_ext_address, param; + u32 board_data_size, board_ext_data_size; int ret; if (ar->fw_board == NULL) { @@ -715,11 +728,24 @@ static int ath6kl_upload_board_file(struct ath6kl *ar) return ret; } - /* Determine where in Target RAM to write Board Data */ - ath6kl_bmi_read(ar, - ath6kl_get_hi_item_addr(ar, - HI_ITEM(hi_board_data)), - (u8 *) &board_address, 4); + /* + * Determine where in Target RAM to write Board Data. + * For AR6004, host determine Target RAM address for + * writing board data. + */ + if (ar->target_type == TARGET_TYPE_AR6004) { + board_address = AR6004_REV1_BOARD_DATA_ADDRESS; + ath6kl_bmi_write(ar, + ath6kl_get_hi_item_addr(ar, + HI_ITEM(hi_board_data)), + (u8 *) &board_address, 4); + } else { + ath6kl_bmi_read(ar, + ath6kl_get_hi_item_addr(ar, + HI_ITEM(hi_board_data)), + (u8 *) &board_address, 4); + } + ath6kl_dbg(ATH6KL_DBG_TRC, "board data download addr: 0x%x\n", board_address); @@ -737,13 +763,28 @@ static int ath6kl_upload_board_file(struct ath6kl *ar) return -EINVAL; } - if (ar->fw_board_len == (AR6003_BOARD_DATA_SZ + - AR6003_BOARD_EXT_DATA_SZ)) { + switch (ar->target_type) { + case TARGET_TYPE_AR6003: + board_data_size = AR6003_BOARD_DATA_SZ; + board_ext_data_size = AR6003_BOARD_EXT_DATA_SZ; + break; + case TARGET_TYPE_AR6004: + board_data_size = AR6004_BOARD_DATA_SZ; + board_ext_data_size = AR6004_BOARD_EXT_DATA_SZ; + break; + default: + WARN_ON(1); + return -EINVAL; + break; + } + + if (ar->fw_board_len == (board_data_size + + board_ext_data_size)) { + /* write extended board data */ ret = ath6kl_bmi_write(ar, board_ext_address, - ar->fw_board + AR6003_BOARD_DATA_SZ, - AR6003_BOARD_EXT_DATA_SZ); - + ar->fw_board + board_data_size, + board_ext_data_size); if (ret) { ath6kl_err("Failed to write extended board data: %d\n", ret); @@ -751,21 +792,22 @@ static int ath6kl_upload_board_file(struct ath6kl *ar) } /* record that extended board data is initialized */ - param = (AR6003_BOARD_EXT_DATA_SZ << 16) | 1; + param = (board_ext_data_size << 16) | 1; + ath6kl_bmi_write(ar, ath6kl_get_hi_item_addr(ar, HI_ITEM(hi_board_ext_data_config)), (unsigned char *) ¶m, 4); } - if (ar->fw_board_len < AR6003_BOARD_DATA_SZ) { + if (ar->fw_board_len < board_data_size) { ath6kl_err("Too small board file: %zu\n", ar->fw_board_len); ret = -EINVAL; return ret; } ret = ath6kl_bmi_write(ar, board_address, ar->fw_board, - AR6003_BOARD_DATA_SZ); + board_data_size); if (ret) { ath6kl_err("Board file bmi write failed: %d\n", ret); @@ -792,6 +834,10 @@ static int ath6kl_upload_otp(struct ath6kl *ar) case AR6003_REV2_VERSION: filename = AR6003_REV2_OTP_FILE; break; + case AR6004_REV1_VERSION: + ath6kl_dbg(ATH6KL_DBG_TRC, "AR6004 doesn't need OTP file\n"); + return 0; + break; default: filename = AR6003_REV3_OTP_FILE; break; @@ -836,6 +882,9 @@ static int ath6kl_upload_firmware(struct ath6kl *ar) case AR6003_REV2_VERSION: filename = AR6003_REV2_FIRMWARE_FILE; break; + case AR6004_REV1_VERSION: + filename = AR6004_REV1_FIRMWARE_FILE; + break; default: filename = AR6003_REV3_FIRMWARE_FILE; break; @@ -860,11 +909,15 @@ static int ath6kl_upload_firmware(struct ath6kl *ar) return ret; } - /* Set starting address for firmware */ - address = ath6kl_get_load_address(ar->version.target_ver, - APP_START_OVERRIDE_ADDR); - ath6kl_bmi_set_app_start(ar, address); - + /* + * Set starting address for firmware + * Don't need to setup app_start override addr on AR6004 + */ + if (ar->target_type != TARGET_TYPE_AR6004) { + address = ath6kl_get_load_address(ar->version.target_ver, + APP_START_OVERRIDE_ADDR); + ath6kl_bmi_set_app_start(ar, address); + } return ret; } @@ -878,6 +931,10 @@ static int ath6kl_upload_patch(struct ath6kl *ar) case AR6003_REV2_VERSION: filename = AR6003_REV2_PATCH_FILE; break; + case AR6004_REV1_VERSION: + /* FIXME: implement for AR6004 */ + return 0; + break; default: filename = AR6003_REV3_PATCH_FILE; break; @@ -916,7 +973,8 @@ static int ath6kl_init_upload(struct ath6kl *ar) u32 param, options, sleep, address; int status = 0; - if (ar->target_type != TARGET_TYPE_AR6003) + if (ar->target_type != TARGET_TYPE_AR6003 && + ar->target_type != TARGET_TYPE_AR6004) return -EINVAL; /* temporarily disable system sleep */ @@ -948,18 +1006,22 @@ static int ath6kl_init_upload(struct ath6kl *ar) options, sleep); /* program analog PLL register */ - status = ath6kl_bmi_reg_write(ar, ATH6KL_ANALOG_PLL_REGISTER, - 0xF9104001); - if (status) - return status; + /* no need to control 40/44MHz clock on AR6004 */ + if (ar->target_type != TARGET_TYPE_AR6004) { + status = ath6kl_bmi_reg_write(ar, ATH6KL_ANALOG_PLL_REGISTER, + 0xF9104001); - /* Run at 80/88MHz by default */ - param = SM(CPU_CLOCK_STANDARD, 1); + if (status) + return status; - address = RTC_BASE_ADDRESS + CPU_CLOCK_ADDRESS; - status = ath6kl_bmi_reg_write(ar, address, param); - if (status) - return status; + /* Run at 80/88MHz by default */ + param = SM(CPU_CLOCK_STANDARD, 1); + + address = RTC_BASE_ADDRESS + CPU_CLOCK_ADDRESS; + status = ath6kl_bmi_reg_write(ar, address, param); + if (status) + return status; + } param = 0; address = RTC_BASE_ADDRESS + LPO_CAL_ADDRESS; diff --git a/drivers/net/wireless/ath/ath6kl/main.c b/drivers/net/wireless/ath/ath6kl/main.c index c336eae0cf48..f236aa8c6b8f 100644 --- a/drivers/net/wireless/ath/ath6kl/main.c +++ b/drivers/net/wireless/ath/ath6kl/main.c @@ -298,6 +298,10 @@ int ath6kl_access_datadiag(struct ath6kl *ar, u32 address, return status; } +/* FIXME: move to a better place, target.h? */ +#define AR6003_RESET_CONTROL_ADDRESS 0x00004000 +#define AR6004_RESET_CONTROL_ADDRESS 0x00004000 + static void ath6kl_reset_device(struct ath6kl *ar, u32 target_type, bool wait_fot_compltn, bool cold_reset) { @@ -305,12 +309,24 @@ static void ath6kl_reset_device(struct ath6kl *ar, u32 target_type, u32 address; u32 data; - if (target_type != TARGET_TYPE_AR6003) + if (target_type != TARGET_TYPE_AR6003 && + target_type != TARGET_TYPE_AR6004) return; data = cold_reset ? RESET_CONTROL_COLD_RST : RESET_CONTROL_MBOX_RST; - address = RTC_BASE_ADDRESS; + switch (target_type) { + case TARGET_TYPE_AR6003: + address = AR6003_RESET_CONTROL_ADDRESS; + break; + case TARGET_TYPE_AR6004: + address = AR6004_RESET_CONTROL_ADDRESS; + break; + default: + address = AR6003_RESET_CONTROL_ADDRESS; + break; + } + status = ath6kl_write_reg_diag(ar, &address, &data); if (status) diff --git a/drivers/net/wireless/ath/ath6kl/target.h b/drivers/net/wireless/ath/ath6kl/target.h index 519a013c9991..53e2c786f8e3 100644 --- a/drivers/net/wireless/ath/ath6kl/target.h +++ b/drivers/net/wireless/ath/ath6kl/target.h @@ -20,6 +20,9 @@ #define AR6003_BOARD_DATA_SZ 1024 #define AR6003_BOARD_EXT_DATA_SZ 768 +#define AR6004_BOARD_DATA_SZ 7168 +#define AR6004_BOARD_EXT_DATA_SZ 0 + #define RESET_CONTROL_ADDRESS 0x00000000 #define RESET_CONTROL_COLD_RST 0x00000100 #define RESET_CONTROL_MBOX_RST 0x00000004 @@ -135,7 +138,8 @@ * between the two, and is intended to remain constant (with additions only * at the end). */ -#define ATH6KL_HI_START_ADDR 0x00540600 +#define ATH6KL_AR6003_HI_START_ADDR 0x00540600 +#define ATH6KL_AR6004_HI_START_ADDR 0x00400800 /* * These are items that the Host may need to access @@ -314,7 +318,12 @@ struct host_interest { #define HI_OPTION_FW_MODE_SHIFT 0xC /* Convert a Target virtual address into a Target physical address */ -#define TARG_VTOP(vaddr) (vaddr & 0x001fffff) +#define AR6003_VTOP(vaddr) ((vaddr) & 0x001fffff) +#define AR6004_VTOP(vaddr) (vaddr) + +#define TARG_VTOP(target_type, vaddr) \ + (((target_type) == TARGET_TYPE_AR6003) ? AR6003_VTOP(vaddr) : \ + (((target_type) == TARGET_TYPE_AR6004) ? AR6004_VTOP(vaddr) : 0)) #define AR6003_REV2_APP_START_OVERRIDE 0x944C00 #define AR6003_REV2_APP_LOAD_ADDRESS 0x543180 @@ -328,4 +337,7 @@ struct host_interest { #define AR6003_REV3_DATASET_PATCH_ADDRESS 0x57FF74 #define AR6003_REV3_RAM_RESERVE_SIZE 512 +#define AR6004_REV1_BOARD_DATA_ADDRESS 0x435400 +#define AR6004_REV1_BOARD_EXT_DATA_ADDRESS 0x437000 +#define AR6004_REV1_RAM_RESERVE_SIZE 11264 #endif