From: Ajay Gupta Date: Thu, 21 Jun 2018 13:19:45 +0000 (+0300) Subject: usb: xhci: increase CRS timeout value X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=305886ca87be480ae159908c2affd135c04215cf;p=openwrt%2Fstaging%2Fblogic.git usb: xhci: increase CRS timeout value Some controllers take almost 55ms to complete controller restore state (CRS). There is no timeout limit mentioned in xhci specification so fixing the issue by increasing the timeout limit to 100ms [reformat code comment -Mathias] Signed-off-by: Ajay Gupta Signed-off-by: Nagaraj Annaiah Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index f11ec61bcc7d..2f4850f25e82 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1078,8 +1078,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) command = readl(&xhci->op_regs->command); command |= CMD_CRS; writel(command, &xhci->op_regs->command); + /* + * Some controllers take up to 55+ ms to complete the controller + * restore so setting the timeout to 100ms. Xhci specification + * doesn't mention any timeout value. + */ if (xhci_handshake(&xhci->op_regs->status, - STS_RESTORE, 0, 10 * 1000)) { + STS_RESTORE, 0, 100 * 1000)) { xhci_warn(xhci, "WARN: xHC restore state timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT;