From: Daniel Golle Date: Sun, 3 Mar 2019 21:09:33 +0000 (+0100) Subject: oxnas: restart: use register definitions from dt-bindings X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=302f7d57a9ad31d71e737af8932aa8e86c476699;p=openwrt%2Fstaging%2Fluka.git oxnas: restart: use register definitions from dt-bindings Signed-off-by: Daniel Golle --- diff --git a/target/linux/oxnas/files/drivers/power/reset/oxnas-restart.c b/target/linux/oxnas/files/drivers/power/reset/oxnas-restart.c index 5664914ea4..945a32ceac 100644 --- a/target/linux/oxnas/files/drivers/power/reset/oxnas-restart.c +++ b/target/linux/oxnas/files/drivers/power/reset/oxnas-restart.c @@ -19,40 +19,7 @@ #include #include #include - -/* bit numbers of reset control register */ -#define SYS_CTRL_RST_SCU 0 -#define SYS_CTRL_RST_COPRO 1 -#define SYS_CTRL_RST_ARM0 2 -#define SYS_CTRL_RST_ARM1 3 -#define SYS_CTRL_RST_USBHS 4 -#define SYS_CTRL_RST_USBHSPHYA 5 -#define SYS_CTRL_RST_MACA 6 -#define SYS_CTRL_RST_MAC SYS_CTRL_RST_MACA -#define SYS_CTRL_RST_PCIEA 7 -#define SYS_CTRL_RST_SGDMA 8 -#define SYS_CTRL_RST_CIPHER 9 -#define SYS_CTRL_RST_DDR 10 -#define SYS_CTRL_RST_SATA 11 -#define SYS_CTRL_RST_SATA_LINK 12 -#define SYS_CTRL_RST_SATA_PHY 13 -#define SYS_CTRL_RST_PCIEPHY 14 -#define SYS_CTRL_RST_STATIC 15 -#define SYS_CTRL_RST_GPIO 16 -#define SYS_CTRL_RST_UART1 17 -#define SYS_CTRL_RST_UART2 18 -#define SYS_CTRL_RST_MISC 19 -#define SYS_CTRL_RST_I2S 20 -#define SYS_CTRL_RST_SD 21 -#define SYS_CTRL_RST_MACB 22 -#define SYS_CTRL_RST_PCIEB 23 -#define SYS_CTRL_RST_VIDEO 24 -#define SYS_CTRL_RST_DDR_PHY 25 -#define SYS_CTRL_RST_USBHSPHYB 26 -#define SYS_CTRL_RST_USBDEV 27 -#define SYS_CTRL_RST_ARMDBG 29 -#define SYS_CTRL_RST_PLLA 30 -#define SYS_CTRL_RST_PLLB 31 +#include /* bit numbers of clock control register */ #define SYS_CTRL_CLK_COPRO 0 @@ -110,33 +77,33 @@ static int oxnas_restart_handle(struct notifier_block *this, * Don't touch the DDR interface as things will come to an impromptu stop * NB Possibly should be asserting reset for PLLB, but there are timing * concerns here according to the docs */ - value = BIT(SYS_CTRL_RST_COPRO) | - BIT(SYS_CTRL_RST_USBHS) | - BIT(SYS_CTRL_RST_USBHSPHYA) | - BIT(SYS_CTRL_RST_MACA) | - BIT(SYS_CTRL_RST_PCIEA) | - BIT(SYS_CTRL_RST_SGDMA) | - BIT(SYS_CTRL_RST_CIPHER) | - BIT(SYS_CTRL_RST_SATA) | - BIT(SYS_CTRL_RST_SATA_LINK) | - BIT(SYS_CTRL_RST_SATA_PHY) | - BIT(SYS_CTRL_RST_PCIEPHY) | - BIT(SYS_CTRL_RST_STATIC) | - BIT(SYS_CTRL_RST_UART1) | - BIT(SYS_CTRL_RST_UART2) | - BIT(SYS_CTRL_RST_MISC) | - BIT(SYS_CTRL_RST_I2S) | - BIT(SYS_CTRL_RST_SD) | - BIT(SYS_CTRL_RST_MACB) | - BIT(SYS_CTRL_RST_PCIEB) | - BIT(SYS_CTRL_RST_VIDEO) | - BIT(SYS_CTRL_RST_USBHSPHYB) | - BIT(SYS_CTRL_RST_USBDEV); + value = BIT(RESET_LEON) | + BIT(RESET_USBHS) | + BIT(RESET_USBPHYA) | + BIT(RESET_MAC) | + BIT(RESET_PCIEA) | + BIT(RESET_SGDMA) | + BIT(RESET_CIPHER) | + BIT(RESET_SATA) | + BIT(RESET_SATA_LINK) | + BIT(RESET_SATA_PHY) | + BIT(RESET_PCIEPHY) | + BIT(RESET_NAND) | + BIT(RESET_UART1) | + BIT(RESET_UART2) | + BIT(RESET_MISC) | + BIT(RESET_I2S) | + BIT(RESET_SD) | + BIT(RESET_MAC_2) | + BIT(RESET_PCIEB) | + BIT(RESET_VIDEO) | + BIT(RESET_USBPHYB) | + BIT(RESET_USBDEV); regmap_write(ctx->sys_ctrl, RST_SET_REGOFFSET, value); /* Release reset to cores as per power on defaults */ - regmap_write(ctx->sys_ctrl, RST_CLR_REGOFFSET, BIT(SYS_CTRL_RST_GPIO)); + regmap_write(ctx->sys_ctrl, RST_CLR_REGOFFSET, BIT(RESET_GPIO)); /* Disable clocks to cores as per power-on defaults - must leave DDR * related clocks enabled otherwise we'll stop rather abruptly. */ @@ -179,9 +146,9 @@ static int oxnas_restart_handle(struct notifier_block *this, * reset is due to power cycling or programatic action, just hit the * (self-clearing) CPU reset bit of the block reset register */ value = - BIT(SYS_CTRL_RST_SCU) | - BIT(SYS_CTRL_RST_ARM0) | - BIT(SYS_CTRL_RST_ARM1); + BIT(RESET_SCU) | + BIT(RESET_ARM0) | + BIT(RESET_ARM1); regmap_write(ctx->sys_ctrl, RST_SET_REGOFFSET, value);