From: Zoltan Herpai Date: Wed, 5 Mar 2014 23:19:25 +0000 (+0000) Subject: sunxi: deprecate 3.12 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=301baf34ddbc838b61dfd8564b27a440f0b85e5a;p=openwrt%2Fstaging%2Fadrian.git sunxi: deprecate 3.12 support Signed-off-by: Zoltan HERPAI SVN-Revision: 39780 --- diff --git a/target/linux/sunxi/config-3.12 b/target/linux/sunxi/config-3.12 deleted file mode 100644 index 2ef8c2af4a..0000000000 --- a/target/linux/sunxi/config-3.12 +++ /dev/null @@ -1,411 +0,0 @@ -# CONFIG_AHCI_SUNXI is not set -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_APM_EMULATION is not set -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set -CONFIG_ARCH_NR_GPIO=288 -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUNXI=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARM=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -# CONFIG_ARM_CPU_SUSPEND is not set -CONFIG_ARM_ERRATA_430973=y -CONFIG_ARM_ERRATA_720789=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_ARM_GIC=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_NR_BANKS=8 -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATA=y -CONFIG_ATAGS=y -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_AUDIT_GENERIC=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_AVERAGE=y -CONFIG_BINFMT_MISC=y -CONFIG_BLK_CGROUP=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_BOUNCE=y -CONFIG_BRIDGE_IGMP_SNOOPING=y -# CONFIG_CACHE_L2X0 is not set -CONFIG_CFQ_GROUP_IOSCHED=y -CONFIG_CGROUPS=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_FREEZER=y -# CONFIG_CGROUP_PERF is not set -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CHARGER_BQ24190 is not set -# CONFIG_CHARGER_MANAGER is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLKSRC_OF=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2" -# CONFIG_CMDLINE_FORCE is not set -CONFIG_COMMON_CLK=y -CONFIG_COMPACTION=y -CONFIG_CONFIGFS_FS=y -CONFIG_CONNECTOR=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_COREDUMP=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_CPUSETS=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC_T10DIF=y -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DCACHE_WORD_ACCESS=y -# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_UART_8250 is not set -# CONFIG_DEBUG_UART_PL01X is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_DIRECT_IO=y -CONFIG_DMADEVICES=y -CONFIG_DMA_OF=y -CONFIG_DNOTIFY=y -CONFIG_DTC=y -CONFIG_DUMMY_CONSOLE=y -# CONFIG_DW_DMAC_CORE is not set -CONFIG_DYNAMIC_DEBUG=y -# CONFIG_EEPROM_SUNXI_SID is not set -CONFIG_ELF_CORE=y -# CONFIG_EMBEDDED is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_EXPERT is not set -CONFIG_EXT4_FS=y -CONFIG_FRAME_POINTER=y -CONFIG_FRAME_WARN=2048 -CONFIG_FREEZER=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GARP=y -CONFIG_GENERIC_ACL=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -# CONFIG_HAMRADIO is not set -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HW_CONSOLE=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_MUX=y -# CONFIG_I2C_MUX_GPIO is not set -# CONFIG_I2C_MUX_PCA9541 is not set -# CONFIG_I2C_MUX_PCA954x is not set -CONFIG_I2C_MUX_PINCTRL=y -CONFIG_I2C_MV64XXX=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -# CONFIG_INPUT_MISC is not set -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_IOSCHED_CFQ=y -CONFIG_IPC_NS=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_BOOTP is not set -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_RARP is not set -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_KALLSYMS=y -CONFIG_KERNEL_GZIP=y -# CONFIG_KERNEL_XZ is not set -CONFIG_KSM=y -CONFIG_KTIME_SCALAR=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_REGULATOR is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_LOG_BUF_SHIFT=19 -CONFIG_LZ4_DECOMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MDIO_SUN4I=y -# CONFIG_MEMCG is not set -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_SUNXI=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MTD is not set -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -# CONFIG_MWIFIEX is not set -CONFIG_NAMESPACES=y -CONFIG_NEED_DMA_MAP_STATE=y -# CONFIG_NEON is not set -# CONFIG_NETPRIO_CGROUP is not set -# CONFIG_NET_CLS_CGROUP is not set -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_NS=y -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_NET_VENDOR_ALLWINNER=y -# CONFIG_NL80211_TESTMODE is not set -CONFIG_NLS=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=4 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_PARTITION_ADVANCED is not set -# CONFIG_PCI_SYSCALL is not set -CONFIG_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -CONFIG_PID_NS=y -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PINCTRL_SUNXI=y -CONFIG_PM=y -CONFIG_PM_CLK=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_RUNTIME=y -CONFIG_POWER_SUPPLY=y -CONFIG_PREEMPT=y -CONFIG_PREEMPT_COUNT=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_RCU=y -CONFIG_PRINTK_TIME=y -# CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_PROC_EVENTS=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_PID_CPUSET=y -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -CONFIG_QUOTA=y -CONFIG_QUOTACTL=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_RCU_BOOST is not set -CONFIG_RCU_CPU_STALL_VERBOSE=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RD_BZIP2=y -CONFIG_RD_GZIP=y -CONFIG_RD_LZ4=y -CONFIG_RD_LZMA=y -CONFIG_RD_LZO=y -CONFIG_RD_XZ=y -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -# CONFIG_REGULATOR_DUMMY is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -CONFIG_RELAY=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RESOURCE_COUNTERS=y -# CONFIG_RFKILL_REGULATOR is not set -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_SATA_AHCI_PLATFORM=y -# CONFIG_SATA_RCAR is not set -CONFIG_SCHED_HRTICK=y -CONFIG_SCSI=y -CONFIG_SECURITYFS=y -CONFIG_SERIAL_8250_DW=y -CONFIG_SERIAL_8250_NR_UARTS=8 -CONFIG_SERIAL_8250_RUNTIME_UARTS=8 -CONFIG_SERIAL_8250_SYSRQ=y -CONFIG_SERIO=y -# CONFIG_SERIO_APBPS2 is not set -# CONFIG_SERIO_OLPC_APSP is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_SLUB_CPU_PARTIAL=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLUB_DEBUG_ON is not set -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SPARSE_IRQ=y -# CONFIG_STAGING is not set -CONFIG_STOP_MACHINE=y -CONFIG_STRICT_DEVMEM=y -# CONFIG_SUN4I_EMAC is not set -CONFIG_SUN4I_TIMER=y -CONFIG_SUN5I_HSTIMER=y -# CONFIG_SUNXI_WATCHDOG is not set -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_TASK_XACCT=y -# CONFIG_TCP_CONG_ADVANCED is not set -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TREE_PREEMPT_RCU=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UID16=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_COMMON=y -CONFIG_USB_DEBUG=y -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_HCD_PLATFORM is not set -CONFIG_USB_STORAGE=y -CONFIG_USB_SUNXI_EHCI=y -CONFIG_USB_SUPPORT=y -# CONFIG_USER_NS is not set -CONFIG_USE_GENERIC_SMP_HELPERS=y -CONFIG_USE_OF=y -CONFIG_UTS_NS=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_WATCHDOG is not set -# CONFIG_XEN is not set -CONFIG_XFRM_ALGO=y -CONFIG_XFRM_USER=y -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -# CONFIG_ZBUD is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/sunxi/patches-3.12/100-1-clk-sunxi_register_factors.patch b/target/linux/sunxi/patches-3.12/100-1-clk-sunxi_register_factors.patch deleted file mode 100644 index c949eeb69f..0000000000 --- a/target/linux/sunxi/patches-3.12/100-1-clk-sunxi_register_factors.patch +++ /dev/null @@ -1,220 +0,0 @@ -From 337d479970b0c8493ee3e8b8d89fb80ee39333a6 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Sun, 5 May 2013 21:26:23 -0300 -Subject: [PATCH] clk: sunxi: register factors clocks behind composite -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit reworks factors clock registration to be done behind a -composite clock. This allows us to additionally add a gate, mux or -divisors, as it will be needed by some future PLLs. - -Signed-off-by: Emilio López ---- - drivers/clk/sunxi/clk-factors.c | 63 +-------------------------------------- - drivers/clk/sunxi/clk-factors.h | 16 +++++----- - drivers/clk/sunxi/clk-sunxi.c | 66 ++++++++++++++++++++++++++++++++++++++--- - 3 files changed, 72 insertions(+), 73 deletions(-) - -diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c -index 88523f9..6e3926c 100644 ---- a/drivers/clk/sunxi/clk-factors.c -+++ b/drivers/clk/sunxi/clk-factors.c -@@ -30,14 +30,6 @@ - * parent - fixed parent. No clk_set_parent support - */ - --struct clk_factors { -- struct clk_hw hw; -- void __iomem *reg; -- struct clk_factors_config *config; -- void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p); -- spinlock_t *lock; --}; -- - #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) - - #define SETMASK(len, pos) (((-1U) >> (31-len)) << (pos)) -@@ -120,61 +112,8 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, - return 0; - } - --static const struct clk_ops clk_factors_ops = { -+const struct clk_ops clk_factors_ops = { - .recalc_rate = clk_factors_recalc_rate, - .round_rate = clk_factors_round_rate, - .set_rate = clk_factors_set_rate, - }; -- --/** -- * clk_register_factors - register a factors clock with -- * the clock framework -- * @dev: device registering this clock -- * @name: name of this clock -- * @parent_name: name of clock's parent -- * @flags: framework-specific flags -- * @reg: register address to adjust factors -- * @config: shift and width of factors n, k, m and p -- * @get_factors: function to calculate the factors for a given frequency -- * @lock: shared register lock for this clock -- */ --struct clk *clk_register_factors(struct device *dev, const char *name, -- const char *parent_name, -- unsigned long flags, void __iomem *reg, -- struct clk_factors_config *config, -- void (*get_factors)(u32 *rate, u32 parent, -- u8 *n, u8 *k, u8 *m, u8 *p), -- spinlock_t *lock) --{ -- struct clk_factors *factors; -- struct clk *clk; -- struct clk_init_data init; -- -- /* allocate the factors */ -- factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); -- if (!factors) { -- pr_err("%s: could not allocate factors clk\n", __func__); -- return ERR_PTR(-ENOMEM); -- } -- -- init.name = name; -- init.ops = &clk_factors_ops; -- init.flags = flags; -- init.parent_names = (parent_name ? &parent_name : NULL); -- init.num_parents = (parent_name ? 1 : 0); -- -- /* struct clk_factors assignments */ -- factors->reg = reg; -- factors->config = config; -- factors->lock = lock; -- factors->hw.init = &init; -- factors->get_factors = get_factors; -- -- /* register the clock */ -- clk = clk_register(dev, &factors->hw); -- -- if (IS_ERR(clk)) -- kfree(factors); -- -- return clk; --} -diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h -index f49851c..02e1a43 100644 ---- a/drivers/clk/sunxi/clk-factors.h -+++ b/drivers/clk/sunxi/clk-factors.h -@@ -17,11 +17,13 @@ struct clk_factors_config { - u8 pwidth; - }; - --struct clk *clk_register_factors(struct device *dev, const char *name, -- const char *parent_name, -- unsigned long flags, void __iomem *reg, -- struct clk_factors_config *config, -- void (*get_factors) (u32 *rate, u32 parent_rate, -- u8 *n, u8 *k, u8 *m, u8 *p), -- spinlock_t *lock); -+struct clk_factors { -+ struct clk_hw hw; -+ void __iomem *reg; -+ struct clk_factors_config *config; -+ void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p); -+ spinlock_t *lock; -+}; -+ -+extern const struct clk_ops clk_factors_ops; - #endif -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 34ee69f..6aed57f 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -256,7 +256,11 @@ static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate, - * sunxi_factors_clk_setup() - Setup function for factor clocks - */ - -+#define SUNXI_FACTORS_MUX_MASK 0x3 -+ - struct factors_data { -+ int enable; -+ int mux; - struct clk_factors_config *table; - void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); - }; -@@ -307,16 +311,70 @@ static void __init sunxi_factors_clk_setup(struct device_node *node, - struct factors_data *data) - { - struct clk *clk; -+ struct clk_factors *factors; -+ struct clk_gate *gate; -+ struct clk_mux *mux; -+ struct clk_hw *gate_hw = NULL; -+ struct clk_hw *mux_hw = NULL; - const char *clk_name = node->name; -- const char *parent; -+ const char *parents[5]; - void *reg; -+ int i = 0; - - reg = of_iomap(node, 0); - -- parent = of_clk_get_parent_name(node, 0); -+ /* if we have a mux, we will have >1 parents */ -+ while (i < 5 && (parents[i] = of_clk_get_parent_name(node, i)) != NULL) -+ i++; -+ -+ factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); -+ if (!factors) -+ return; -+ -+ /* Add a gate if this factor clock can be gated */ -+ if (data->enable) { -+ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); -+ if (!gate) { -+ kfree(factors); -+ return; -+ } -+ -+ /* set up gate properties */ -+ gate->reg = reg; -+ gate->bit_idx = data->enable; -+ gate->lock = &clk_lock; -+ gate_hw = &gate->hw; -+ } - -- clk = clk_register_factors(NULL, clk_name, parent, 0, reg, -- data->table, data->getter, &clk_lock); -+ /* Add a mux if this factor clock can be muxed */ -+ if (data->mux) { -+ mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); -+ if (!mux) { -+ kfree(factors); -+ kfree(gate); -+ return; -+ } -+ -+ /* set up gate properties */ -+ mux->reg = reg; -+ mux->shift = data->mux; -+ mux->mask = SUNXI_FACTORS_MUX_MASK; -+ mux->lock = &clk_lock; -+ mux_hw = &mux->hw; -+ } -+ -+ /* set up factors properties */ -+ factors->reg = reg; -+ factors->config = data->table; -+ factors->get_factors = data->getter; -+ factors->lock = &clk_lock; -+ -+ clk = clk_register_composite(NULL, clk_name, -+ parents, i, -+ mux_hw, &clk_mux_ops, -+ &factors->hw, &clk_factors_ops, -+ gate_hw, &clk_gate_ops, -+ i ? 0 : CLK_IS_ROOT); - - if (!IS_ERR(clk)) { - of_clk_add_provider(node, of_clk_src_simple_get, clk); --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/100-2-fix-off-by-one-masks.patch b/target/linux/sunxi/patches-3.12/100-2-fix-off-by-one-masks.patch deleted file mode 100644 index 4dba064375..0000000000 --- a/target/linux/sunxi/patches-3.12/100-2-fix-off-by-one-masks.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 04609953e11377c0705b0aba5c25ebdcbb9e4aa7 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Thu, 5 Sep 2013 19:47:20 -0300 -Subject: [PATCH] clk: sunxi: factors: fix off-by-one masks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The previous code would generate one bit too long masks, and was -needlessly complicated. This patch replaces it by simpler code that can -generate the masks correctly. - -Signed-off-by: Emilio López ---- - drivers/clk/sunxi/clk-factors.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c -index 88523f9..5687ac9 100644 ---- a/drivers/clk/sunxi/clk-factors.c -+++ b/drivers/clk/sunxi/clk-factors.c -@@ -40,7 +40,7 @@ struct clk_factors { - - #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) - --#define SETMASK(len, pos) (((-1U) >> (31-len)) << (pos)) -+#define SETMASK(len, pos) (((1U << (len)) - 1) << (pos)) - #define CLRMASK(len, pos) (~(SETMASK(len, pos))) - #define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit)) - --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/100-3-clk-factors-clear-vars.patch b/target/linux/sunxi/patches-3.12/100-3-clk-factors-clear-vars.patch deleted file mode 100644 index a1323ea02d..0000000000 --- a/target/linux/sunxi/patches-3.12/100-3-clk-factors-clear-vars.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 29aef2f23ca8c91bce0a356fd5f120404389125a Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Thu, 5 Sep 2013 19:50:46 -0300 -Subject: [PATCH] clk: sunxi: factors: clear variables before using them -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Random bits may get into our factors if we don't clear n, k, m and p. - -Signed-off-by: Emilio López ---- - drivers/clk/sunxi/clk-factors.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c -index 5687ac9..f05207a 100644 ---- a/drivers/clk/sunxi/clk-factors.c -+++ b/drivers/clk/sunxi/clk-factors.c -@@ -88,7 +88,7 @@ static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate, - static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) - { -- u8 n, k, m, p; -+ u8 n = 0, k = 0, m = 0, p = 0; - u32 reg; - struct clk_factors *factors = to_clk_factors(hw); - struct clk_factors_config *config = factors->config; --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/101-clk-sunxi_add-gating-pll1.patch b/target/linux/sunxi/patches-3.12/101-clk-sunxi_add-gating-pll1.patch deleted file mode 100644 index 00519b815a..0000000000 --- a/target/linux/sunxi/patches-3.12/101-clk-sunxi_add-gating-pll1.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 68557a66b206de79a4556d393d51865407525d52 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 6 May 2013 09:59:00 -0300 -Subject: [PATCH] clk: sunxi: add gating support to PLL1 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds gating support to PLL1 on the clock driver. This makes -the PLL1 implementation fully compatible with PLL4 as well. - -Signed-off-by: Emilio López ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 2 +- - drivers/clk/sunxi/clk-sunxi.c | 2 ++ - 2 files changed, 3 insertions(+), 1 deletion(-) - -diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt -index 00a5c264..7d9245f 100644 ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -7,7 +7,7 @@ This binding uses the common clock binding[1]. - Required properties: - - compatible : shall be one of the following: - "allwinner,sun4i-osc-clk" - for a gatable oscillator -- "allwinner,sun4i-pll1-clk" - for the main PLL clock -+ "allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4 - "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 - "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock - "allwinner,sun4i-axi-clk" - for the AXI clock -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 6aed57f..c0b0675 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -293,11 +293,13 @@ struct factors_data { - }; - - static const struct factors_data sun4i_pll1_data __initconst = { -+ .enable = 31, - .table = &sun4i_pll1_config, - .getter = sun4i_get_pll1_factors, - }; - - static const struct factors_data sun6i_a31_pll1_data __initconst = { -+ .enable = 31, - .table = &sun6i_a31_pll1_config, - .getter = sun6i_a31_get_pll1_factors, - }; --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/102-clk-sunxi_add_pll4.patch b/target/linux/sunxi/patches-3.12/102-clk-sunxi_add_pll4.patch deleted file mode 100644 index 65fb3e66df..0000000000 --- a/target/linux/sunxi/patches-3.12/102-clk-sunxi_add_pll4.patch +++ /dev/null @@ -1,94 +0,0 @@ -From 73bff3c4c33a2bfbddc593fad53c6c58af93bfab Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 6 May 2013 11:03:41 -0300 -Subject: [PATCH] ARM: sunxi: add PLL4 support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds the PLL4 definition to the sun4i, sun5i and sun7i -device trees. PLL4 is compatible with PLL1. - -Signed-off-by: Emilio López ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 7 +++++++ - arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++++ - arch/arm/boot/dts/sun5i-a13.dtsi | 7 +++++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ - 4 files changed, 28 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 319cc6b..a6c1cae 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -66,6 +66,13 @@ - clocks = <&osc24M>; - }; - -+ pll4: pll4@01c20018 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-pll1-clk"; -+ reg = <0x01c20018 0x4>; -+ clocks = <&osc24M>; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 5247674..c3f4eed 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -63,6 +63,13 @@ - clocks = <&osc24M>; - }; - -+ pll4: pll4@01c20018 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-pll1-clk"; -+ reg = <0x01c20018 0x4>; -+ clocks = <&osc24M>; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index ce8ef2a..8c4a9c3 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -67,6 +67,13 @@ - clocks = <&osc24M>; - }; - -+ pll4: pll4@01c20018 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-pll1-clk"; -+ reg = <0x01c20018 0x4>; -+ clocks = <&osc24M>; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 282c775..21bf143 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -62,6 +62,13 @@ - clocks = <&osc24M>; - }; - -+ pll4: pll4@01c20018 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-pll1-clk"; -+ reg = <0x01c20018 0x4>; -+ clocks = <&osc24M>; -+ }; -+ - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/103-clk-sunxi_add_pll5-6.patch b/target/linux/sunxi/patches-3.12/103-clk-sunxi_add_pll5-6.patch deleted file mode 100644 index f680a42e1f..0000000000 --- a/target/linux/sunxi/patches-3.12/103-clk-sunxi_add_pll5-6.patch +++ /dev/null @@ -1,309 +0,0 @@ -From cad227619badf2a0ff2593d9935fedc84d5ef1ef Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Sun, 26 May 2013 14:23:50 -0300 -Subject: [PATCH] clk: sunxi: add PLL5 and PLL6 support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit implements PLL5 and PLL6 support on the sunxi clock driver. -These PLLs use a similar factor clock, but differ on their outputs. - -Signed-off-by: Emilio López ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 2 + - drivers/clk/sunxi/clk-sunxi.c | 182 +++++++++++++++++++++- - 2 files changed, 177 insertions(+), 7 deletions(-) - -diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt -index 7d9245f..773f3ae 100644 ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -9,6 +9,8 @@ Required properties: - "allwinner,sun4i-osc-clk" - for a gatable oscillator - "allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4 - "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 -+ "allwinner,sun4i-pll5-clk" - for the PLL5 clock -+ "allwinner,sun4i-pll6-clk" - for the PLL6 clock - "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock - "allwinner,sun4i-axi-clk" - for the AXI clock - "allwinner,sun4i-axi-gates-clk" - for the AXI gates -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index c0b0675..6947ba9 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -210,6 +210,40 @@ static void sun6i_a31_get_pll1_factors(u32 *freq, u32 parent_rate, - } - - /** -+ * sun4i_get_pll5_factors() - calculates n, k factors for PLL5 -+ * PLL5 rate is calculated as follows -+ * rate = parent_rate * n * (k + 1) -+ * parent_rate is always 24Mhz -+ */ -+ -+static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate, -+ u8 *n, u8 *k, u8 *m, u8 *p) -+{ -+ u8 div; -+ -+ /* Normalize value to a 24M multiple */ -+ div = *freq / 24000000; -+ *freq = 24000000 * div; -+ -+ /* we were called to round the frequency, we can now return */ -+ if (n == NULL) -+ return; -+ -+ if (div < 31) -+ *k = 0; -+ else if (div / 2 < 31) -+ *k = 1; -+ else if (div / 3 < 31) -+ *k = 2; -+ else -+ *k = 3; -+ -+ *n = DIV_ROUND_UP(div, (*k+1)); -+} -+ -+ -+ -+/** - * sun4i_get_apb1_factors() - calculates m, p factors for APB1 - * APB1 rate is calculated as follows - * rate = (parent_rate >> p) / (m + 1); -@@ -285,6 +319,13 @@ struct factors_data { - .mwidth = 2, - }; - -+static struct clk_factors_config sun4i_pll5_config = { -+ .nshift = 8, -+ .nwidth = 5, -+ .kshift = 4, -+ .kwidth = 2, -+}; -+ - static struct clk_factors_config sun4i_apb1_config = { - .mshift = 0, - .mwidth = 5, -@@ -304,13 +345,19 @@ struct factors_data { - .getter = sun6i_a31_get_pll1_factors, - }; - -+static const struct factors_data sun4i_pll5_data __initconst = { -+ .enable = 31, -+ .table = &sun4i_pll5_config, -+ .getter = sun4i_get_pll5_factors, -+}; -+ - static const struct factors_data sun4i_apb1_data __initconst = { - .table = &sun4i_apb1_config, - .getter = sun4i_get_apb1_factors, - }; - --static void __init sunxi_factors_clk_setup(struct device_node *node, -- struct factors_data *data) -+static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, -+ const struct factors_data *data) - { - struct clk *clk; - struct clk_factors *factors; -@@ -321,6 +368,7 @@ static void __init sunxi_factors_clk_setup(struct device_node *node, - const char *clk_name = node->name; - const char *parents[5]; - void *reg; -+ unsigned long flags; - int i = 0; - - reg = of_iomap(node, 0); -@@ -331,14 +379,14 @@ static void __init sunxi_factors_clk_setup(struct device_node *node, - - factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); - if (!factors) -- return; -+ return NULL; - - /* Add a gate if this factor clock can be gated */ - if (data->enable) { - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); - if (!gate) { - kfree(factors); -- return; -+ return NULL; - } - - /* set up gate properties */ -@@ -354,7 +402,7 @@ static void __init sunxi_factors_clk_setup(struct device_node *node, - if (!mux) { - kfree(factors); - kfree(gate); -- return; -+ return NULL; - } - - /* set up gate properties */ -@@ -371,17 +419,21 @@ static void __init sunxi_factors_clk_setup(struct device_node *node, - factors->get_factors = data->getter; - factors->lock = &clk_lock; - -+ /* We should not disable pll5, it powers the RAM */ -+ flags = !strcmp("pll5", clk_name) ? CLK_IGNORE_UNUSED : 0; -+ - clk = clk_register_composite(NULL, clk_name, - parents, i, - mux_hw, &clk_mux_ops, - &factors->hw, &clk_factors_ops, -- gate_hw, &clk_gate_ops, -- i ? 0 : CLK_IS_ROOT); -+ gate_hw, &clk_gate_ops, flags); - - if (!IS_ERR(clk)) { - of_clk_add_provider(node, of_clk_src_simple_get, clk); - clk_register_clkdev(clk, clk_name, NULL); - } -+ -+ return clk; - } - - -@@ -616,6 +668,112 @@ static void __init sunxi_gates_clk_setup(struct device_node *node, - of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); - } - -+ -+ -+/** -+ * sunxi_divs_clk_setup() - Setup function for leaf divisors on clocks -+ */ -+ -+#define SUNXI_DIVS_MAX_QTY 2 -+#define SUNXI_DIVISOR_WIDTH 2 -+ -+struct divs_data { -+ const struct factors_data *factors; /* data for the factor clock */ -+ struct { -+ u8 fixed; /* is it a fixed divisor? if not... */ -+ struct clk_div_table *table; /* is it a table based divisor? */ -+ u8 shift; /* otherwise it's a normal divisor with this shift */ -+ u8 pow; /* is it power-of-two based? */ -+ } div[SUNXI_DIVS_MAX_QTY]; -+}; -+ -+static struct clk_div_table pll6_sata_table[] = { -+ { .val = 0, .div = 6, }, -+ { .val = 1, .div = 12, }, -+ { .val = 2, .div = 18, }, -+ { .val = 3, .div = 24, }, -+ { } /* sentinel */ -+}; -+ -+static const struct divs_data pll5_divs_data __initconst = { -+ .factors = &sun4i_pll5_data, -+ .div = { -+ { .shift = 0, .pow = 0, }, /* M, DDR */ -+ { .shift = 16, .pow = 1, }, /* P, other */ -+ } -+}; -+ -+static const struct divs_data pll6_divs_data __initconst = { -+ .factors = &sun4i_pll5_data, -+ .div = { -+ { .shift = 0, .table = pll6_sata_table }, /* M, SATA */ -+ { .fixed = 2 }, /* P, other */ -+ } -+}; -+ -+static void __init sunxi_divs_clk_setup(struct device_node *node, -+ struct divs_data *data) -+{ -+ struct clk_onecell_data *clk_data; -+ const char *parent = node->name; -+ const char *clk_name; -+ struct clk **clks, *pclk; -+ void *reg; -+ int i = 0; -+ int flags, clkflags; -+ -+ /* Set up factor clock that we will be dividing */ -+ pclk = sunxi_factors_clk_setup(node, data->factors); -+ -+ reg = of_iomap(node, 0); -+ -+ clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); -+ if (!clk_data) -+ return; -+ clks = kzalloc(SUNXI_DIVS_MAX_QTY * sizeof(struct clk *), GFP_KERNEL); -+ if (!clks) { -+ kfree(clk_data); -+ return; -+ } -+ clk_data->clks = clks; -+ -+ /* It's not a good idea to have automatic reparenting changing -+ * our RAM clock! */ -+ clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT; -+ -+ for (i = 0; i < SUNXI_DIVS_MAX_QTY; i++) { -+ if (of_property_read_string_index(node, "clock-output-names", -+ i, &clk_name) != 0) -+ break; -+ -+ if (data->div[i].fixed) { -+ clks[i] = clk_register_fixed_factor(NULL, clk_name, -+ parent, clkflags, -+ 1, data->div[i].fixed); -+ } else { -+ flags = data->div[i].pow ? CLK_DIVIDER_POWER_OF_TWO : 0; -+ clks[i] = clk_register_divider_table(NULL, clk_name, -+ parent, clkflags, reg, -+ data->div[i].shift, -+ SUNXI_DIVISOR_WIDTH, flags, -+ data->div[i].table, &clk_lock); -+ } -+ -+ WARN_ON(IS_ERR(clk_data->clks[i])); -+ clk_register_clkdev(clks[i], clk_name, NULL); -+ } -+ -+ /* The last clock available on the getter is the parent */ -+ clks[i++] = pclk; -+ -+ /* Adjust to the real max */ -+ clk_data->clk_num = i; -+ -+ of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); -+} -+ -+ -+ - /* Matches for factors clocks */ - static const struct of_device_id clk_factors_match[] __initconst = { - {.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,}, -@@ -633,6 +791,13 @@ static void __init sunxi_gates_clk_setup(struct device_node *node, - {} - }; - -+/* Matches for divided outputs */ -+static const struct of_device_id clk_divs_match[] __initconst = { -+ {.compatible = "allwinner,sun4i-pll5-clk", .data = &pll5_divs_data,}, -+ {.compatible = "allwinner,sun4i-pll6-clk", .data = &pll6_divs_data,}, -+ {} -+}; -+ - /* Matches for mux clocks */ - static const struct of_device_id clk_mux_match[] __initconst = { - {.compatible = "allwinner,sun4i-cpu-clk", .data = &sun4i_cpu_mux_data,}, -@@ -688,6 +853,9 @@ void __init sunxi_init_clocks(void) - /* Register divider clocks */ - of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup); - -+ /* Register divided output clocks */ -+ of_sunxi_table_clock_setup(clk_divs_match, sunxi_divs_clk_setup); -+ - /* Register mux clocks */ - of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup); - --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/104-arm-sunxi_add_pll5-6_dts.patch b/target/linux/sunxi/patches-3.12/104-arm-sunxi_add_pll5-6_dts.patch deleted file mode 100644 index bd9221207a..0000000000 --- a/target/linux/sunxi/patches-3.12/104-arm-sunxi_add_pll5-6_dts.patch +++ /dev/null @@ -1,197 +0,0 @@ -From 4f40ad1587e9435a2085703fa2a7d7c9245306b2 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Sun, 26 May 2013 14:08:59 -0300 -Subject: [PATCH] ARM: sunxi: add PLL5 and PLL6 support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds PLL5 and PLL6 nodes to the sun4i, sun5i and sun7i -device trees. - -Signed-off-by: Emilio López ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 19 +++++++++++++++++-- - arch/arm/boot/dts/sun5i-a10s.dtsi | 19 +++++++++++++++++-- - arch/arm/boot/dts/sun5i-a13.dtsi | 19 +++++++++++++++++-- - arch/arm/boot/dts/sun7i-a20.dtsi | 28 ++++++++++++++++------------ - 4 files changed, 67 insertions(+), 18 deletions(-) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index a6c1cae..5e2fc45 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -73,6 +73,22 @@ - clocks = <&osc24M>; - }; - -+ pll5: pll5@01c20020 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll5-clk"; -+ reg = <0x01c20020 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll5_ddr", "pll5_other"; -+ }; -+ -+ pll6: pll6@01c20028 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll6-clk"; -+ reg = <0x01c20028 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll6_sata", "pll6_other", "pll6"; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; -@@ -138,12 +154,11 @@ - "apb0_ir1", "apb0_keypad"; - }; - -- /* dummy is pll62 */ - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-apb1-mux-clk"; - reg = <0x01c20058 0x4>; -- clocks = <&osc24M>, <&dummy>, <&osc32k>; -+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - }; - - apb1: apb1@01c20058 { -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index c3f4eed..b29412a 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -70,6 +70,22 @@ - clocks = <&osc24M>; - }; - -+ pll5: pll5@01c20020 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll5-clk"; -+ reg = <0x01c20020 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll5_ddr", "pll5_other"; -+ }; -+ -+ pll6: pll6@01c20028 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll6-clk"; -+ reg = <0x01c20028 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll6_sata", "pll6_other", "pll6"; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; -@@ -130,12 +146,11 @@ - "apb0_ir", "apb0_keypad"; - }; - -- /* dummy is pll62 */ - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-apb1-mux-clk"; - reg = <0x01c20058 0x4>; -- clocks = <&osc24M>, <&dummy>, <&osc32k>; -+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - }; - - apb1: apb1@01c20058 { -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index 8c4a9c3..cded3c7 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -74,6 +74,22 @@ - clocks = <&osc24M>; - }; - -+ pll5: pll5@01c20020 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll5-clk"; -+ reg = <0x01c20020 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll5_ddr", "pll5_other"; -+ }; -+ -+ pll6: pll6@01c20028 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll6-clk"; -+ reg = <0x01c20028 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll6_sata", "pll6_other", "pll6"; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; -@@ -132,12 +148,11 @@ - clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; - }; - -- /* dummy is pll6 */ - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-apb1-mux-clk"; - reg = <0x01c20058 0x4>; -- clocks = <&osc24M>, <&dummy>, <&osc32k>; -+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - }; - - apb1: apb1@01c20058 { -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 21bf143..2e39ed9 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -69,23 +69,27 @@ - clocks = <&osc24M>; - }; - -- /* -- * This is a dummy clock, to be used as placeholder on -- * other mux clocks when a specific parent clock is not -- * yet implemented. It should be dropped when the driver -- * is complete. -- */ -- pll6: pll6 { -- #clock-cells = <0>; -- compatible = "fixed-clock"; -- clock-frequency = <0>; -+ pll5: pll5@01c20020 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll5-clk"; -+ reg = <0x01c20020 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll5_ddr", "pll5_other"; -+ }; -+ -+ pll6: pll6@01c20028 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll6-clk"; -+ reg = <0x01c20028 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-cpu-clk"; - reg = <0x01c20054 0x4>; -- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6>; -+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>; - }; - - axi: axi@01c20054 { -@@ -144,7 +148,7 @@ - #clock-cells = <0>; - compatible = "allwinner,sun4i-apb1-mux-clk"; - reg = <0x01c20058 0x4>; -- clocks = <&osc24M>, <&pll6>, <&osc32k>; -+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - }; - - apb1: apb1@01c20058 { --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/105-clk-sunxi_mod0.patch b/target/linux/sunxi/patches-3.12/105-clk-sunxi_mod0.patch deleted file mode 100644 index bbb8057f7c..0000000000 --- a/target/linux/sunxi/patches-3.12/105-clk-sunxi_mod0.patch +++ /dev/null @@ -1,121 +0,0 @@ -From 3473e6acea4bd01ba2b334628970390207f9f4fd Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Tue, 21 May 2013 21:25:05 -0300 -Subject: [PATCH] clk: sunxi: mod0 support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit implements support for the "module 0" type of clocks, as -used by MMC, IR, NAND, SATA and other components. - -Signed-off-by: Emilio López ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 1 + - drivers/clk/sunxi/clk-sunxi.c | 57 +++++++++++++++++++++++ - 2 files changed, 58 insertions(+) - -diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt -index 773f3ae..ff3f61c 100644 ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -35,6 +35,7 @@ Required properties: - "allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20 - "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31 - "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 -+ "allwinner,sun4i-mod0-clk" - for the module 0 family of clocks - - Required properties for all clocks: - - reg : shall be the control register address for the clock. -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 6947ba9..96c01b2 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -287,6 +287,47 @@ static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate, - - - /** -+ * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks -+ * MMC rate is calculated as follows -+ * rate = (parent_rate >> p) / (m + 1); -+ */ -+ -+static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate, -+ u8 *n, u8 *k, u8 *m, u8 *p) -+{ -+ u8 div, calcm, calcp; -+ -+ /* These clocks can only divide, so we will never be able to achieve -+ * frequencies higher than the parent frequency */ -+ if (*freq > parent_rate) -+ *freq = parent_rate; -+ -+ div = parent_rate / *freq; -+ -+ if (div < 16) -+ calcp = 0; -+ else if (div / 2 < 16) -+ calcp = 1; -+ else if (div / 4 < 16) -+ calcp = 2; -+ else -+ calcp = 3; -+ -+ calcm = DIV_ROUND_UP(div, 1 << calcp); -+ -+ *freq = (parent_rate >> calcp) / calcm; -+ -+ /* we were called to round the frequency, we can now return */ -+ if (n == NULL) -+ return; -+ -+ *m = calcm - 1; -+ *p = calcp; -+} -+ -+ -+ -+/** - * sunxi_factors_clk_setup() - Setup function for factor clocks - */ - -@@ -333,6 +374,14 @@ struct factors_data { - .pwidth = 2, - }; - -+/* user manual says "n" but it's really "p" */ -+static struct clk_factors_config sun4i_mod0_config = { -+ .mshift = 0, -+ .mwidth = 4, -+ .pshift = 16, -+ .pwidth = 2, -+}; -+ - static const struct factors_data sun4i_pll1_data __initconst = { - .enable = 31, - .table = &sun4i_pll1_config, -@@ -356,6 +405,13 @@ struct factors_data { - .getter = sun4i_get_apb1_factors, - }; - -+static const struct factors_data sun4i_mod0_data __initconst = { -+ .enable = 31, -+ .mux = 24, -+ .table = &sun4i_mod0_config, -+ .getter = sun4i_get_mod0_factors, -+}; -+ - static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, - const struct factors_data *data) - { -@@ -779,6 +835,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, - {.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,}, - {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,}, - {.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,}, -+ {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,}, - {} - }; - --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/106-dt-sun7i-add-mod0-clk.patch b/target/linux/sunxi/patches-3.12/106-dt-sun7i-add-mod0-clk.patch deleted file mode 100644 index fbd30c65e7..0000000000 --- a/target/linux/sunxi/patches-3.12/106-dt-sun7i-add-mod0-clk.patch +++ /dev/null @@ -1,136 +0,0 @@ -From 8cf7164b32f2ce228b0c8116fd712484f67c65b5 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Wed, 4 Sep 2013 21:28:49 -0300 -Subject: [PATCH] ARM: sun7i: dt: mod0 clocks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds all the mod0 clocks available on A20 to its device -tree. This list was created by looking at AW's code release. - -Signed-off-by: Emilio López -Acked-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 105 +++++++++++++++++++++++++++++++++++++++ - 1 file changed, 105 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 0af287e..0596e82 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -174,6 +174,111 @@ - "apb1_uart2", "apb1_uart3", "apb1_uart4", - "apb1_uart5", "apb1_uart6", "apb1_uart7"; - }; -+ -+ nand: nand@01c20080 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20080 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ms: ms@01c20084 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20084 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc0: mmc0@01c20088 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20088 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc1: mmc1@01c2008c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2008c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc2: mmc2@01c20090 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20090 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc3: mmc3@01c20094 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20094 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ts: ts@01c20098 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20098 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ss: ss@01c2009c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2009c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi0: spi0@01c200a0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi1: spi1@01c200a4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi2: spi2@01c200a8 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a8 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ pata: pata@01c200ac { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200ac 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ir0: ir0@01c200b0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200b0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ir1: ir1@01c200b4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200b4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi3: spi3@01c200d4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200d4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; - }; - - soc@01c00000 { --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/107-dt-sun5i-add-mod0-clk.patch b/target/linux/sunxi/patches-3.12/107-dt-sun5i-add-mod0-clk.patch deleted file mode 100644 index 63fbdd1c70..0000000000 --- a/target/linux/sunxi/patches-3.12/107-dt-sun5i-add-mod0-clk.patch +++ /dev/null @@ -1,198 +0,0 @@ -From 0ae543fe8ae8b9ea7166c39b00e977506eccdf4b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Wed, 4 Sep 2013 21:21:16 -0300 -Subject: [PATCH] ARM: sun5i: dt: mod0 clocks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds all the mod0 clocks available on A10 and A13. The list -has been constructed by looking at the Allwinner code release for A10S -and A13. - -Signed-off-by: Emilio López -Acked-by: Maxime Ripard ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 77 +++++++++++++++++++++++++++++++++++++++ - arch/arm/boot/dts/sun5i-a13.dtsi | 77 +++++++++++++++++++++++++++++++++++++++ - 2 files changed, 154 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 86e06e4..82b5ce6 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -173,6 +173,83 @@ - "apb1_i2c2", "apb1_uart0", "apb1_uart1", - "apb1_uart2", "apb1_uart3"; - }; -+ -+ nand: nand@01c20080 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20080 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ms: ms@01c20084 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20084 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc0: mmc0@01c20088 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20088 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc1: mmc1@01c2008c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2008c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc2: mmc2@01c20090 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20090 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ts: ts@01c20098 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20098 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ss: ss@01c2009c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2009c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi0: spi0@01c200a0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi1: spi1@01c200a4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi2: spi2@01c200a8 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a8 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ir0: ir0@01c200b0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200b0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; - }; - - soc@01c00000 { -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index cded3c7..938e6d3 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -170,6 +170,83 @@ - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart1", "apb1_uart3"; - }; -+ -+ nand: nand@01c20080 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20080 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ms: ms@01c20084 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20084 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc0: mmc0@01c20088 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20088 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc1: mmc1@01c2008c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2008c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc2: mmc2@01c20090 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20090 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ts: ts@01c20098 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20098 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ss: ss@01c2009c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2009c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi0: spi0@01c200a0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi1: spi1@01c200a4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi2: spi2@01c200a8 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a8 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ir0: ir0@01c200b0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200b0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; - }; - - soc@01c00000 { --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/108-dt-sun4i-add-mod0-clk.patch b/target/linux/sunxi/patches-3.12/108-dt-sun4i-add-mod0-clk.patch deleted file mode 100644 index d72335bbad..0000000000 --- a/target/linux/sunxi/patches-3.12/108-dt-sun4i-add-mod0-clk.patch +++ /dev/null @@ -1,135 +0,0 @@ -From 5f554ea6757748c2fc45228030a20e08f6053ff7 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Tue, 21 May 2013 21:28:32 -0300 -Subject: [PATCH] ARM: sun4i: dt: mod0 clocks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds all the mod0 clocks present on sun4i to its device tree - -Signed-off-by: Emilio López -Acked-by: Maxime Ripard ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 105 +++++++++++++++++++++++++++++++++++++++ - 1 file changed, 105 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index ebacb5d..2828427e 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -184,6 +184,111 @@ - "apb1_uart4", "apb1_uart5", "apb1_uart6", - "apb1_uart7"; - }; -+ -+ nand: nand@01c20080 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20080 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ms: ms@01c20084 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20084 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc0: mmc0@01c20088 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20088 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc1: mmc1@01c2008c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2008c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc2: mmc2@01c20090 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20090 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ mmc3: mmc3@01c20094 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20094 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ts: ts@01c20098 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20098 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ss: ss@01c2009c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2009c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi0: spi0@01c200a0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi1: spi1@01c200a4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi2: spi2@01c200a8 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a8 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ pata: pata@01c200ac { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200ac 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ir0: ir0@01c200b0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200b0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ ir1: ir1@01c200b4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200b4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; -+ -+ spi3: spi3@01c200d4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200d4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ }; - }; - - soc@01c00000 { --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/109-mach-sunxi-add-clkprovider.patch b/target/linux/sunxi/patches-3.12/109-mach-sunxi-add-clkprovider.patch deleted file mode 100644 index 7ef6ea25d2..0000000000 --- a/target/linux/sunxi/patches-3.12/109-mach-sunxi-add-clkprovider.patch +++ /dev/null @@ -1,11 +0,0 @@ -diff -ruN old/arch/arm/mach-sunxi/sunxi.c new/arch/arm/mach-sunxi/sunxi.c ---- old/arch/arm/mach-sunxi/sunxi.c 2014-01-04 01:57:31.000000000 +0100 -+++ new/arch/arm/mach-sunxi/sunxi.c 2014-01-04 01:11:47.000000000 +0100 -@@ -10,6 +10,7 @@ - * warranty of any kind, whether express or implied. - */ - -+#include - #include - #include - #include diff --git a/target/linux/sunxi/patches-3.12/110-clk-sunxi-fix-pll5-6.patch b/target/linux/sunxi/patches-3.12/110-clk-sunxi-fix-pll5-6.patch deleted file mode 100644 index ad5935c89f..0000000000 --- a/target/linux/sunxi/patches-3.12/110-clk-sunxi-fix-pll5-6.patch +++ /dev/null @@ -1,149 +0,0 @@ -From 11e7ff129807394d87c937b880bb58972dc91fc0 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Thu, 28 Nov 2013 09:00:47 -0300 -Subject: [PATCH] fixup! clk: sunxi: add PLL5 and PLL6 support - ---- - drivers/clk/sunxi/clk-sunxi.c | 83 +++++++++++++++++++++++++++++++++++-------- - 1 file changed, 69 insertions(+), 14 deletions(-) - -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index d2b8d3c..3ce33b8 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -807,10 +807,11 @@ struct divs_data { - struct clk_div_table *table; /* is it a table based divisor? */ - u8 shift; /* otherwise it's a normal divisor with this shift */ - u8 pow; /* is it power-of-two based? */ -+ u8 gate; /* is it independently gateable? */ - } div[SUNXI_DIVS_MAX_QTY]; - }; - --static struct clk_div_table pll6_sata_table[] = { -+static struct clk_div_table pll6_sata_tbl[] = { - { .val = 0, .div = 6, }, - { .val = 1, .div = 12, }, - { .val = 2, .div = 18, }, -@@ -829,7 +830,7 @@ struct divs_data { - static const struct divs_data pll6_divs_data __initconst = { - .factors = &sun4i_pll5_data, - .div = { -- { .shift = 0, .table = pll6_sata_table }, /* M, SATA */ -+ { .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */ - { .fixed = 2 }, /* P, other */ - } - }; -@@ -852,6 +853,11 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, - const char *parent = node->name; - const char *clk_name; - struct clk **clks, *pclk; -+ struct clk_hw *gate_hw, *rate_hw; -+ const struct clk_ops *rate_ops; -+ struct clk_gate *gate = NULL; -+ struct clk_fixed_factor *fix_factor; -+ struct clk_divider *divider; - void *reg; - int i = 0; - int flags, clkflags; -@@ -866,10 +872,9 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, - return; - - clks = kzalloc(SUNXI_DIVS_MAX_QTY * sizeof(struct clk *), GFP_KERNEL); -- if (!clks) { -- kfree(clk_data); -- return; -- } -+ if (!clks) -+ goto free_clkdata; -+ - clk_data->clks = clks; - - /* It's not a good idea to have automatic reparenting changing -@@ -881,19 +886,60 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, - i, &clk_name) != 0) - break; - -+ gate_hw = NULL; -+ rate_hw = NULL; -+ rate_ops = NULL; -+ -+ /* If this leaf clock can be gated, create a gate */ -+ if (data->div[i].gate) { -+ gate = kzalloc(sizeof(*gate), GFP_KERNEL); -+ if (!gate) -+ goto free_clks; -+ -+ gate->reg = reg; -+ gate->bit_idx = data->div[i].gate; -+ gate->lock = &clk_lock; -+ -+ gate_hw = &gate->hw; -+ } -+ -+ /* Leaves can be fixed or configurable divisors */ - if (data->div[i].fixed) { -- clks[i] = clk_register_fixed_factor(NULL, clk_name, -- parent, clkflags, -- 1, data->div[i].fixed); -+ fix_factor = kzalloc(sizeof(*fix_factor), GFP_KERNEL); -+ if (!fix_factor) -+ goto free_gate; -+ -+ fix_factor->mult = 1; -+ fix_factor->div = data->div[i].fixed; -+ -+ rate_hw = &fix_factor->hw; -+ rate_ops = &clk_fixed_factor_ops; - } else { -+ divider = kzalloc(sizeof(*divider), GFP_KERNEL); -+ if (!divider) -+ goto free_gate; -+ - flags = data->div[i].pow ? CLK_DIVIDER_POWER_OF_TWO : 0; -- clks[i] = clk_register_divider_table(NULL, clk_name, -- parent, clkflags, reg, -- data->div[i].shift, -- SUNXI_DIVISOR_WIDTH, flags, -- data->div[i].table, &clk_lock); -+ -+ divider->reg = reg; -+ divider->shift = data->div[i].shift; -+ divider->width = SUNXI_DIVISOR_WIDTH; -+ divider->flags = flags; -+ divider->lock = &clk_lock; -+ divider->table = data->div[i].table; -+ -+ rate_hw = ÷r->hw; -+ rate_ops = &clk_divider_ops; - } - -+ /* Wrap the (potential) gate and the divisor on a composite -+ * clock to unify them */ -+ clks[i] = clk_register_composite(NULL, clk_name, &parent, 1, -+ NULL, NULL, -+ rate_hw, rate_ops, -+ gate_hw, &clk_gate_ops, -+ clkflags); -+ - WARN_ON(IS_ERR(clk_data->clks[i])); - clk_register_clkdev(clks[i], clk_name, NULL); - } -@@ -905,6 +951,15 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, - clk_data->clk_num = i; - - of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); -+ -+ return; -+ -+free_gate: -+ kfree(gate); -+free_clks: -+ kfree(clks); -+free_clkdata: -+ kfree(clk_data); - } - - --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/111-clk-composite-determine-rate.patch b/target/linux/sunxi/patches-3.12/111-clk-composite-determine-rate.patch deleted file mode 100644 index 0b4697a605..0000000000 --- a/target/linux/sunxi/patches-3.12/111-clk-composite-determine-rate.patch +++ /dev/null @@ -1,74 +0,0 @@ -From de7bfadd1022613ab2c7eeca124bb1e4a6f4c072 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Thu, 5 Sep 2013 19:43:33 -0300 -Subject: [PATCH] clk: composite: .determine_rate support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds .determine_rate support to the composite clock. It will -use the .determine_rate callback from the rate component if available, -and fall back on the mux component otherwise. This allows composite -clocks to enjoy the benefits of automatic clock reparenting. - -Signed-off-by: Emilio López ---- - drivers/clk/clk-composite.c | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - -diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c -index a33f46f..753d0b7 100644 ---- a/drivers/clk/clk-composite.c -+++ b/drivers/clk/clk-composite.c -@@ -55,6 +55,30 @@ static unsigned long clk_composite_recalc_rate(struct clk_hw *hw, - return rate_ops->recalc_rate(rate_hw, parent_rate); - } - -+static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long *best_parent_rate, -+ struct clk **best_parent_p) -+{ -+ struct clk_composite *composite = to_clk_composite(hw); -+ const struct clk_ops *rate_ops = composite->rate_ops; -+ const struct clk_ops *mux_ops = composite->mux_ops; -+ struct clk_hw *rate_hw = composite->rate_hw; -+ struct clk_hw *mux_hw = composite->mux_hw; -+ -+ if (rate_hw && rate_ops && rate_ops->determine_rate) { -+ rate_hw->clk = hw->clk; -+ return rate_ops->determine_rate(rate_hw, rate, best_parent_rate, -+ best_parent_p); -+ } else if (mux_hw && mux_ops && mux_ops->determine_rate) { -+ mux_hw->clk = hw->clk; -+ return mux_ops->determine_rate(rate_hw, rate, best_parent_rate, -+ best_parent_p); -+ } else { -+ pr_err("clk: clk_composite_determine_rate function called, but no mux or rate callback set!\n"); -+ return 0; -+ } -+} -+ - static long clk_composite_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) - { -@@ -147,6 +171,8 @@ struct clk *clk_register_composite(struct device *dev, const char *name, - composite->mux_ops = mux_ops; - clk_composite_ops->get_parent = clk_composite_get_parent; - clk_composite_ops->set_parent = clk_composite_set_parent; -+ if (mux_ops->determine_rate) -+ clk_composite_ops->determine_rate = clk_composite_determine_rate; - } - - if (rate_hw && rate_ops) { -@@ -170,6 +196,8 @@ struct clk *clk_register_composite(struct device *dev, const char *name, - composite->rate_hw = rate_hw; - composite->rate_ops = rate_ops; - clk_composite_ops->recalc_rate = clk_composite_recalc_rate; -+ if (rate_ops->determine_rate) -+ clk_composite_ops->determine_rate = clk_composite_determine_rate; - } - - if (gate_hw && gate_ops) { --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/112-clk-sunxi-automatic-reparenting.patch b/target/linux/sunxi/patches-3.12/112-clk-sunxi-automatic-reparenting.patch deleted file mode 100644 index 1ed5754b50..0000000000 --- a/target/linux/sunxi/patches-3.12/112-clk-sunxi-automatic-reparenting.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 679e8db359d0c1994e88f3a4a2aa0697ce001ad4 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Thu, 5 Sep 2013 19:52:41 -0300 -Subject: [PATCH] clk: sunxi: factors: automatic reparenting support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit implements .determine_rate, so that our factor clocks can be -reparented when needed. - -Signed-off-by: Emilio López ---- - drivers/clk/sunxi/clk-factors.c | 36 ++++++++++++++++++++++++++++++++++++ - 1 file changed, 36 insertions(+) - -diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c -index 9e23264..3806d97 100644 ---- a/drivers/clk/sunxi/clk-factors.c -+++ b/drivers/clk/sunxi/clk-factors.c -@@ -77,6 +77,41 @@ static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate, - return rate; - } - -+static long clk_factors_determine_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long *best_parent_rate, -+ struct clk **best_parent_p) -+{ -+ struct clk *clk = hw->clk, *parent, *best_parent = NULL; -+ int i, num_parents; -+ unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0; -+ -+ /* find the parent that can help provide the fastest rate <= rate */ -+ num_parents = __clk_get_num_parents(clk); -+ for (i = 0; i < num_parents; i++) { -+ parent = clk_get_parent_by_index(clk, i); -+ if (!parent) -+ continue; -+ if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT) -+ parent_rate = __clk_round_rate(parent, rate); -+ else -+ parent_rate = __clk_get_rate(parent); -+ -+ child_rate = clk_factors_round_rate(hw, rate, &parent_rate); -+ -+ if (child_rate <= rate && child_rate > best_child_rate) { -+ best_parent = parent; -+ best = parent_rate; -+ best_child_rate = child_rate; -+ } -+ } -+ -+ if (best_parent) -+ *best_parent_p = best_parent; -+ *best_parent_rate = best; -+ -+ return best_child_rate; -+} -+ - static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) - { -@@ -113,6 +148,7 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, - } - - const struct clk_ops clk_factors_ops = { -+ .determine_rate = clk_factors_determine_rate, - .recalc_rate = clk_factors_recalc_rate, - .round_rate = clk_factors_round_rate, - .set_rate = clk_factors_set_rate, --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/113-clk-sunxi-unify-apb1.patch b/target/linux/sunxi/patches-3.12/113-clk-sunxi-unify-apb1.patch deleted file mode 100644 index 951eaffa3d..0000000000 --- a/target/linux/sunxi/patches-3.12/113-clk-sunxi-unify-apb1.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 75d3fa72634a4943f0f03146916094b6f4908552 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Sun, 8 Sep 2013 18:14:52 -0300 -Subject: [PATCH] clk: sunxi: unify APB1 clock -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit unifies the APB1 mux with the APB1 clock, using the new -factors infrastructure. - -Signed-off-by: Emilio López ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 1 - - drivers/clk/sunxi/clk-sunxi.c | 6 +----- - 2 files changed, 1 insertion(+), 6 deletions(-) - -diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt -index 46d8433..e840cb2 100644 ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -27,7 +27,6 @@ Required properties: - "allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s - "allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20 - "allwinner,sun4i-apb1-clk" - for the APB1 clock -- "allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing - "allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10 - "allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13 - "allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 06c4f01..0ecaa18 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -400,6 +400,7 @@ struct factors_data { - }; - - static const struct factors_data sun4i_apb1_data __initconst = { -+ .mux = 24, - .table = &sun4i_apb1_config, - .getter = sun4i_get_apb1_factors, - }; -@@ -511,10 +512,6 @@ struct mux_data { - .shift = 12, - }; - --static const struct mux_data sun4i_apb1_mux_data __initconst = { -- .shift = 24, --}; -- - static void __init sunxi_mux_clk_setup(struct device_node *node, - struct mux_data *data) - { -@@ -869,7 +866,6 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, - /* Matches for mux clocks */ - static const struct of_device_id clk_mux_match[] __initconst = { - {.compatible = "allwinner,sun4i-cpu-clk", .data = &sun4i_cpu_mux_data,}, -- {.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &sun4i_apb1_mux_data,}, - {.compatible = "allwinner,sun6i-a31-ahb1-mux-clk", .data = &sun6i_a31_ahb1_mux_data,}, - {} - }; --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/114-dt-unify-apb1.patch b/target/linux/sunxi/patches-3.12/114-dt-unify-apb1.patch deleted file mode 100644 index 7652391cf3..0000000000 --- a/target/linux/sunxi/patches-3.12/114-dt-unify-apb1.patch +++ /dev/null @@ -1,118 +0,0 @@ -From f3443f6d43a69a520ae1e636d69a71c4a6bee21e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Sun, 8 Sep 2013 18:12:28 -0300 -Subject: [PATCH] ARM: sunxi: dt: unify APB1 clock -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -With the new factors infrastructure in place, we can unify apb1 and -apb1_mux as a single clock now. - -Signed-off-by: Emilio López ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 9 +-------- - arch/arm/boot/dts/sun5i-a10s.dtsi | 9 +-------- - arch/arm/boot/dts/sun5i-a13.dtsi | 9 +-------- - arch/arm/boot/dts/sun7i-a20.dtsi | 9 +-------- - 4 files changed, 4 insertions(+), 32 deletions(-) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 2828427e..4dccdb0 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -158,18 +158,11 @@ - "apb0_ir1", "apb0_keypad"; - }; - -- apb1_mux: apb1_mux@01c20058 { -- #clock-cells = <0>; -- compatible = "allwinner,sun4i-apb1-mux-clk"; -- reg = <0x01c20058 0x4>; -- clocks = <&osc24M>, <&pll6 1>, <&osc32k>; -- }; -- - apb1: apb1@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-apb1-clk"; - reg = <0x01c20058 0x4>; -- clocks = <&apb1_mux>; -+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - }; - - apb1_gates: apb1_gates@01c2006c { -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 60bd3f7..9cb1b14 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -150,18 +150,11 @@ - "apb0_ir", "apb0_keypad"; - }; - -- apb1_mux: apb1_mux@01c20058 { -- #clock-cells = <0>; -- compatible = "allwinner,sun4i-apb1-mux-clk"; -- reg = <0x01c20058 0x4>; -- clocks = <&osc24M>, <&pll6 1>, <&osc32k>; -- }; -- - apb1: apb1@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-apb1-clk"; - reg = <0x01c20058 0x4>; -- clocks = <&apb1_mux>; -+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - }; - - apb1_gates: apb1_gates@01c2006c { -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index 3e616a0..6b74dd0 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -148,18 +148,11 @@ - clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; - }; - -- apb1_mux: apb1_mux@01c20058 { -- #clock-cells = <0>; -- compatible = "allwinner,sun4i-apb1-mux-clk"; -- reg = <0x01c20058 0x4>; -- clocks = <&osc24M>, <&pll6 1>, <&osc32k>; -- }; -- - apb1: apb1@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-apb1-clk"; - reg = <0x01c20058 0x4>; -- clocks = <&apb1_mux>; -+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - }; - - apb1_gates: apb1_gates@01c2006c { -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 0bf5d07..55d3e14 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -148,18 +148,11 @@ - "apb0_iis2", "apb0_keypad"; - }; - -- apb1_mux: apb1_mux@01c20058 { -- #clock-cells = <0>; -- compatible = "allwinner,sun4i-apb1-mux-clk"; -- reg = <0x01c20058 0x4>; -- clocks = <&osc24M>, <&pll6 1>, <&osc32k>; -- }; -- - apb1: apb1@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-apb1-clk"; - reg = <0x01c20058 0x4>; -- clocks = <&apb1_mux>; -+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - }; - - apb1_gates: apb1_gates@01c2006c { --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/115-clk-sunxi-muxable-ahb-clock.patch b/target/linux/sunxi/patches-3.12/115-clk-sunxi-muxable-ahb-clock.patch deleted file mode 100644 index 3446b37c4d..0000000000 --- a/target/linux/sunxi/patches-3.12/115-clk-sunxi-muxable-ahb-clock.patch +++ /dev/null @@ -1,102 +0,0 @@ -From 147a46beeb49c6baabb85126d570f330a2ba7cad Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Sat, 14 Sep 2013 20:48:40 -0300 -Subject: [PATCH] clk: sunxi: Implement muxable AHB clock -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -sun5i and sun7i have a mux to change the AHB clock parent, this commit -adds support for it on the driver. - -Signed-off-by: Emilio López ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 1 + - drivers/clk/sunxi/clk-sunxi.c | 37 +++++++++++++++++++++++ - 2 files changed, 38 insertions(+) - -diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt -index e840cb2..941bd93 100644 ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -15,6 +15,7 @@ Required properties: - "allwinner,sun4i-axi-clk" - for the AXI clock - "allwinner,sun4i-axi-gates-clk" - for the AXI gates - "allwinner,sun4i-ahb-clk" - for the AHB clock -+ "allwinner,sun5i-a13-ahb-clk" - for the AHB clock on A13 - "allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10 - "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13 - "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 0ecaa18..360d705 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -240,7 +240,32 @@ static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate, - *n = DIV_ROUND_UP(div, (*k+1)); - } - -+/** -+ * sun5i_get_ahb_factors() - calculates p factor for AHB -+ * AHB rate is calculated as follows -+ * rate = parent_rate >> p -+ */ - -+static void sun5i_a13_get_ahb_factors(u32 *freq, u32 parent_rate, -+ u8 *n, u8 *k, u8 *m, u8 *p) -+{ -+ u8 div; -+ -+ /* This clock can only divide, so we will never achieve a higher -+ * rate than the parent's */ -+ if (*freq > parent_rate) -+ *freq = parent_rate; -+ -+ /* Normalize value to a parent multiple */ -+ div = *freq / parent_rate; -+ *freq = parent_rate * div; -+ -+ /* we were called to round the frequency, we can now return */ -+ if (n == NULL) -+ return; -+ -+ *p = div; -+} - - /** - * sun4i_get_apb1_factors() - calculates m, p factors for APB1 -@@ -366,6 +391,11 @@ struct factors_data { - .kwidth = 2, - }; - -+static struct clk_factors_config sun5i_a13_ahb_config = { -+ .pshift = 4, -+ .pwidth = 2, -+}; -+ - static struct clk_factors_config sun4i_apb1_config = { - .mshift = 0, - .mwidth = 5, -@@ -399,6 +429,12 @@ struct factors_data { - .getter = sun4i_get_pll5_factors, - }; - -+static const struct factors_data sun5i_a13_ahb_data __initconst = { -+ .mux = 6, -+ .table = &sun5i_a13_ahb_config, -+ .getter = sun5i_a13_get_ahb_factors, -+}; -+ - static const struct factors_data sun4i_apb1_data __initconst = { - .mux = 24, - .table = &sun4i_apb1_config, -@@ -842,6 +878,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, - static const struct of_device_id clk_factors_match[] __initconst = { - {.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,}, - {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,}, -+ {.compatible = "allwinner,sun5i-a13-ahb-clk", .data = &sun5i_a13_ahb_data,}, - {.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,}, - {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,}, - {} --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/116-dt-update-ahb-clock.patch b/target/linux/sunxi/patches-3.12/116-dt-update-ahb-clock.patch deleted file mode 100644 index 3d48a608de..0000000000 --- a/target/linux/sunxi/patches-3.12/116-dt-update-ahb-clock.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 051f43def45e53d93b9998728e398a68c4948114 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Sat, 14 Sep 2013 20:44:03 -0300 -Subject: [PATCH] ARM: sunxi: dt: Update AHB clock to be muxable on sun[57]i -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -sun5i and sun7i have a mux to select the parent clock for AHB. This -commit implements the required changes on the device trees. - -Signed-off-by: Emilio López ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 4 ++-- - arch/arm/boot/dts/sun5i-a13.dtsi | 4 ++-- - arch/arm/boot/dts/sun7i-a20.dtsi | 4 ++-- - 3 files changed, 6 insertions(+), 6 deletions(-) - -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 9cb1b14..83e183c 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -115,9 +115,9 @@ - - ahb: ahb@01c20054 { - #clock-cells = <0>; -- compatible = "allwinner,sun4i-ahb-clk"; -+ compatible = "allwinner,sun5i-a13-ahb-clk"; - reg = <0x01c20054 0x4>; -- clocks = <&axi>; -+ clocks = <&axi>, <&cpu>, <&pll6 1>; - }; - - ahb_gates: ahb_gates@01c20060 { -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index 6b74dd0..0bb4300 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -115,9 +115,9 @@ - - ahb: ahb@01c20054 { - #clock-cells = <0>; -- compatible = "allwinner,sun4i-ahb-clk"; -+ compatible = "allwinner,sun5i-a13-ahb-clk"; - reg = <0x01c20054 0x4>; -- clocks = <&axi>; -+ clocks = <&axi>, <&cpu>, <&pll6 1>; - }; - - ahb_gates: ahb_gates@01c20060 { -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 55d3e14..63757c5 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -105,9 +105,9 @@ - - ahb: ahb@01c20054 { - #clock-cells = <0>; -- compatible = "allwinner,sun4i-ahb-clk"; -+ compatible = "allwinner,sun5i-a13-ahb-clk"; - reg = <0x01c20054 0x4>; -- clocks = <&axi>; -+ clocks = <&axi>, <&pll6 1>, <&pll6 2>; - }; - - ahb_gates: ahb_gates@01c20060 { --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/117-clk-sunxi-declare-OF-provider.patch b/target/linux/sunxi/patches-3.12/117-clk-sunxi-declare-OF-provider.patch deleted file mode 100644 index 296e0e478d..0000000000 --- a/target/linux/sunxi/patches-3.12/117-clk-sunxi-declare-OF-provider.patch +++ /dev/null @@ -1,108 +0,0 @@ -From be0804513a506de96925f9ed1aa8dc1facd4c180 Mon Sep 17 00:00:00 2001 -From: Sebastian Hesselbarth -Date: Fri, 6 Sep 2013 14:59:57 +0200 -Subject: [PATCH] clk: sunxi: declare OF clock provider - -Common clock framework allows to register clock providers to get called -on of_clk_init() by using CLK_OF_DECLARE. This converts sunxi clock -providers to make use of it and get rid of the mach specific clk init -call. As sunxi has a bunch of independent clk provider nodes, we hook -current clock init to board compatible to make it called once. - -Signed-off-by: Sebastian Hesselbarth -Acked-by: Maxime Ripard -Acked-by: Mike Turquette ---- - arch/arm/mach-sunxi/sunxi.c | 4 +--- - drivers/clk/sunxi/clk-sunxi.c | 11 ++++++----- - include/linux/clk/sunxi.h | 22 ---------------------- - 3 files changed, 7 insertions(+), 30 deletions(-) - delete mode 100644 include/linux/clk/sunxi.h - -diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c -index e79fb34..e5a6975 100644 ---- a/arch/arm/mach-sunxi/sunxi.c -+++ b/arch/arm/mach-sunxi/sunxi.c -@@ -20,8 +20,6 @@ - #include - #include - --#include -- - #include - #include - #include -@@ -118,7 +116,7 @@ static void sunxi_setup_restart(void) - - static void __init sunxi_timer_init(void) - { -- sunxi_init_clocks(); -+ of_clk_init(NULL); - clocksource_of_init(); - } - -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 34ee69f..9bbd035 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -16,7 +16,6 @@ - - #include - #include --#include - #include - #include - -@@ -617,11 +616,8 @@ static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_mat - } - } - --void __init sunxi_init_clocks(void) -+static void __init sunxi_init_clocks(struct device_node *np) - { -- /* Register all the simple and basic clocks on DT */ -- of_clk_init(NULL); -- - /* Register factor clocks */ - of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup); - -@@ -634,3 +630,8 @@ void __init sunxi_init_clocks(void) - /* Register gate clocks */ - of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup); - } -+CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sunxi_init_clocks); -+CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sunxi_init_clocks); -+CLK_OF_DECLARE(sun5i_a13_clk_init, "allwinner,sun5i-a13", sunxi_init_clocks); -+CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sunxi_init_clocks); -+CLK_OF_DECLARE(sun7i_a20_clk_init, "allwinner,sun7i-a20", sunxi_init_clocks); -diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h -deleted file mode 100644 -index e074fdd..0000000 ---- a/include/linux/clk/sunxi.h -+++ /dev/null -@@ -1,22 +0,0 @@ --/* -- * Copyright 2012 Maxime Ripard -- * -- * Maxime Ripard -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License as published by -- * the Free Software Foundation; either version 2 of the License, or -- * (at your option) any later version. -- * -- * This program is distributed in the hope that it will be useful, -- * but WITHOUT ANY WARRANTY; without even the implied warranty of -- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -- * GNU General Public License for more details. -- */ -- --#ifndef __LINUX_CLK_SUNXI_H_ --#define __LINUX_CLK_SUNXI_H_ -- --void __init sunxi_init_clocks(void); -- --#endif --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/118-sunxi-clk-core-clock-protect.patch b/target/linux/sunxi/patches-3.12/118-sunxi-clk-core-clock-protect.patch deleted file mode 100644 index 50536d1a1e..0000000000 --- a/target/linux/sunxi/patches-3.12/118-sunxi-clk-core-clock-protect.patch +++ /dev/null @@ -1,67 +0,0 @@ -From d1bcc34ce6cb7601ce27f3090aee0e8a3e8076e3 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Sat, 14 Sep 2013 20:54:42 -0300 -Subject: [PATCH] clk: sunxi: protect core clocks from accidental shutdown -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Some important clocks may get disabled as a side effect of another clock -being disabled, because they have no consumers. This patch implements a -mechanism so those clocks can be claimed by the driver and therefore -remain enabled at all times. - -Signed-off-by: Emilio López ---- - drivers/clk/sunxi/clk-sunxi.c | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 9bbd035..8fc1375 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -616,6 +616,31 @@ static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_mat - } - } - -+/** -+ * System clock protection -+ * -+ * By enabling these critical clocks, we prevent their accidental gating -+ * by the framework -+ */ -+static void __init sunxi_clock_protect(void) -+{ -+ struct clk *clk; -+ -+ /* memory bus clock - sun5i+ */ -+ clk = clk_get(NULL, "mbus"); -+ if (!IS_ERR(clk)) { -+ clk_prepare_enable(clk); -+ clk_put(clk); -+ } -+ -+ /* DDR clock - sun4i+ */ -+ clk = clk_get(NULL, "pll5_ddr"); -+ if (!IS_ERR(clk)) { -+ clk_prepare_enable(clk); -+ clk_put(clk); -+ } -+} -+ - static void __init sunxi_init_clocks(struct device_node *np) - { - /* Register factor clocks */ -@@ -629,6 +654,9 @@ static void __init sunxi_init_clocks(struct device_node *np) - - /* Register gate clocks */ - of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup); -+ -+ /* Enable core system clocks */ -+ sunxi_clock_protect(); - } - CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sunxi_init_clocks); - CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sunxi_init_clocks); --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/121-dt-sun5i-add-olinuxino-micro.patch b/target/linux/sunxi/patches-3.12/121-dt-sun5i-add-olinuxino-micro.patch deleted file mode 100644 index fc727e849a..0000000000 --- a/target/linux/sunxi/patches-3.12/121-dt-sun5i-add-olinuxino-micro.patch +++ /dev/null @@ -1,117 +0,0 @@ -From 52e86b37b1d3f7c02938def3a036e0bb0f723964 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sun, 15 Dec 2013 20:23:36 +0100 -Subject: [PATCH] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board - -The A13-OLinuXino-MICRO is a small dev-board with the Allwinner A13 SoC: -https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino-MICRO/ - -Features: -A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU -256 MB RAM (128Mbit x 16) -5VDC input power supply with own ICs, noise immune design -1 USB host -1 USB OTG which can power the board -SD-card connector for booting the Linux image -VGA video output -LCD signals available on connector so you still can use LCD if you disable VGA/HDMI -Audio output -Microphone input pads (no connector) - -Signed-off-by: Hans de Goede -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 68 +++++++++++++++++++++++++ - 2 files changed, 69 insertions(+) - create mode 100644 arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts - -diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index d57c1a6..b663ed7 100644 ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -255,6 +255,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ - sun4i-a10-hackberry.dtb \ - sun5i-a10s-olinuxino-micro.dtb \ - sun5i-a13-olinuxino.dtb \ -+ sun5i-a13-olinuxino-micro.dtb \ - sun6i-a31-colombus.dtb \ - sun7i-a20-cubieboard2.dtb \ - sun7i-a20-cubietruck.dtb \ -diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts -new file mode 100644 -index 0000000..fe2ce0a ---- /dev/null -+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts -@@ -0,0 +1,68 @@ -+/* -+ * Copyright 2012 Maxime Ripard -+ * Copyright 2013 Hans de Goede -+ * -+ * Maxime Ripard -+ * -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/dts-v1/; -+/include/ "sun5i-a13.dtsi" -+ -+/ { -+ model = "Olimex A13-Olinuxino Micro"; -+ compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13"; -+ -+ soc@01c00000 { -+ pinctrl@01c20800 { -+ led_pins_olinuxinom: led_pins@0 { -+ allwinner,pins = "PG9"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <1>; -+ allwinner,pull = <0>; -+ }; -+ }; -+ -+ uart1: serial@01c28400 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins_b>; -+ status = "okay"; -+ }; -+ -+ i2c0: i2c@01c2ac00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c1: i2c@01c2b000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c2: i2c@01c2b400 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c2_pins_a>; -+ status = "okay"; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&led_pins_olinuxinom>; -+ -+ power { -+ label = "a13-olinuxino-micro:green:power"; -+ gpios = <&pio 6 9 0>; -+ default-state = "on"; -+ }; -+ }; -+}; --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/130-sun7i-enable-i2c-ctrlers.patch b/target/linux/sunxi/patches-3.12/130-sun7i-enable-i2c-ctrlers.patch deleted file mode 100644 index ef761a66f8..0000000000 --- a/target/linux/sunxi/patches-3.12/130-sun7i-enable-i2c-ctrlers.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 220d6c860e0c7853aea6509ea2b5a44463c9af8b Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sat, 31 Aug 2013 23:07:24 +0200 -Subject: [PATCH] ARM: sun7i: Enable the I2C controllers - -The Allwinner A20 shares the same I2C controller than the one that could -be found on earlier SoCs from Allwinner. There is only a few more of -these controllers. Add all of them in the DTSI. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 45 ++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 45 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 2e39ed9..0d0ee15 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -340,6 +340,51 @@ - status = "disabled"; - }; - -+ i2c0: i2c@01c2ac00 { -+ compatible = "allwinner,sun4i-i2c"; -+ reg = <0x01c2ac00 0x400>; -+ interrupts = <0 7 1>; -+ clocks = <&apb1_gates 0>; -+ clock-frequency = <100000>; -+ status = "disabled"; -+ }; -+ -+ i2c1: i2c@01c2b000 { -+ compatible = "allwinner,sun4i-i2c"; -+ reg = <0x01c2b000 0x400>; -+ interrupts = <0 8 1>; -+ clocks = <&apb1_gates 1>; -+ clock-frequency = <100000>; -+ status = "disabled"; -+ }; -+ -+ i2c2: i2c@01c2b400 { -+ compatible = "allwinner,sun4i-i2c"; -+ reg = <0x01c2b400 0x400>; -+ interrupts = <0 9 1>; -+ clocks = <&apb1_gates 2>; -+ clock-frequency = <100000>; -+ status = "disabled"; -+ }; -+ -+ i2c3: i2c@01c2b800 { -+ compatible = "allwinner,sun4i-i2c"; -+ reg = <0x01c2b800 0x400>; -+ interrupts = <0 88 1>; -+ clocks = <&apb1_gates 3>; -+ clock-frequency = <100000>; -+ status = "disabled"; -+ }; -+ -+ i2c4: i2c@01c2bc00 { -+ compatible = "allwinner,sun4i-i2c"; -+ reg = <0x01c2bc00 0x400>; -+ interrupts = <0 89 1>; -+ clocks = <&apb1_gates 15>; -+ clock-frequency = <100000>; -+ status = "disabled"; -+ }; -+ - gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; - reg = <0x01c81000 0x1000>, --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/131-sun7i-add-i2c-pinmuxing.patch b/target/linux/sunxi/patches-3.12/131-sun7i-add-i2c-pinmuxing.patch deleted file mode 100644 index 951059f446..0000000000 --- a/target/linux/sunxi/patches-3.12/131-sun7i-add-i2c-pinmuxing.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 1baebecc2892567373f5f9c3650d21496125af18 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sat, 31 Aug 2013 23:08:49 +0200 -Subject: [PATCH] ARM: sun7i: Add the pin muxing options for the I2C - controllers - -The A20 boards we currently have share the same pins for the i2c -controllers they share. Add them to the DTSI. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 21 +++++++++++++++++++++ - 1 file changed, 21 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 0d0ee15..a6cd039 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -226,6 +226,27 @@ - allwinner,pull = <0>; - }; - -+ i2c0_pins_a: i2c0@0 { -+ allwinner,pins = "PB0", "PB1"; -+ allwinner,function = "i2c0"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ i2c1_pins_a: i2c1@0 { -+ allwinner,pins = "PB18", "PB19"; -+ allwinner,function = "i2c1"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ i2c2_pins_a: i2c2@0 { -+ allwinner,pins = "PB20", "PB21"; -+ allwinner,function = "i2c2"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/132-add-dt-i2c-for-olinuxino-a20.patch b/target/linux/sunxi/patches-3.12/132-add-dt-i2c-for-olinuxino-a20.patch deleted file mode 100644 index c1f3b7097c..0000000000 --- a/target/linux/sunxi/patches-3.12/132-add-dt-i2c-for-olinuxino-a20.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 45cfefedb2886fac4a7f18c1720310ea9792ea4c Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sat, 31 Aug 2013 23:14:19 +0200 -Subject: [PATCH] ARM: sun7i: olinuxino-micro: Enable the I2C controllers - -The A20-olinuxino-micro uses the first three I2C controllers found on -the A20. Enable them in the DT. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -index 9e77855..ead3013 100644 ---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -@@ -60,6 +60,24 @@ - pinctrl-0 = <&uart7_pins_a>; - status = "okay"; - }; -+ -+ i2c0: i2c@01c2ac00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c1: i2c@01c2b000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c2: i2c@01c2b400 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c2_pins_a>; -+ status = "okay"; -+ }; - }; - - leds { --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/133-dt-sun7i-cb2-enable-i2c.patch b/target/linux/sunxi/patches-3.12/133-dt-sun7i-cb2-enable-i2c.patch deleted file mode 100644 index 606bd7315f..0000000000 --- a/target/linux/sunxi/patches-3.12/133-dt-sun7i-cb2-enable-i2c.patch +++ /dev/null @@ -1,39 +0,0 @@ -From ce0106c5bbf689949c752b2a389ee82721c0e5d6 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sat, 31 Aug 2013 23:12:58 +0200 -Subject: [PATCH] ARM: sun7i: cubieboard2: Enable the I2C controllers - -The Cubieboard2 uses both the i2c0 and i2c1 controllers. Enable them in -the DT. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -index 15e625e..5c51cb8 100644 ---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -@@ -48,6 +48,18 @@ - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; -+ -+ i2c0: i2c@01c2ac00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c1: i2c@01c2b000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins_a>; -+ status = "okay"; -+ }; - }; - - leds { --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/135-sunxi-order-Kconfig-options.patch b/target/linux/sunxi/patches-3.12/135-sunxi-order-Kconfig-options.patch deleted file mode 100644 index 1265fdf505..0000000000 --- a/target/linux/sunxi/patches-3.12/135-sunxi-order-Kconfig-options.patch +++ /dev/null @@ -1,35 +0,0 @@ -From b788beda4db21ac28ae302f0323cffb75e578cac Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Tue, 24 Sep 2013 11:09:19 +0300 -Subject: [PATCH] ARM: sunxi: Order Kconfig options alphabetically - -Signed-off-by: Maxime Ripard ---- - arch/arm/mach-sunxi/Kconfig | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig -index 3ab2f65..c9e72c8 100644 ---- a/arch/arm/mach-sunxi/Kconfig -+++ b/arch/arm/mach-sunxi/Kconfig -@@ -1,14 +1,14 @@ - config ARCH_SUNXI - bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB -+ select ARM_GIC - select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select GENERIC_IRQ_CHIP -+ select HAVE_SMP - select PINCTRL -+ select PINCTRL_SUNXI - select SPARSE_IRQ - select SUN4I_TIMER -- select PINCTRL_SUNXI -- select ARM_GIC -- select HAVE_SMP --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/136-clksrc-add-hstimer.patch b/target/linux/sunxi/patches-3.12/136-clksrc-add-hstimer.patch deleted file mode 100644 index db54eb8f8b..0000000000 --- a/target/linux/sunxi/patches-3.12/136-clksrc-add-hstimer.patch +++ /dev/null @@ -1,297 +0,0 @@ -From 3bf30f6381f9287eb99ce096bf2fa327a69c8a71 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 7 Nov 2013 12:01:48 +0100 -Subject: [PATCH] clocksource: Add Allwinner SoCs HS timers driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Most of the Allwinner SoCs (at this time, all but the A10) also have a -High Speed timers that are not using the 24MHz oscillator as a source -but rather the AHB clock running much faster. - -The IP is slightly different between the A10s/A13 and the one used in -the A20/A31, since the latter have 4 timers available, while the former -have only 2 of them. - -[dlezcano] : Fixed conflict with b788beda "Order Kconfig options - alphabetically" - -Signed-off-by: Maxime Ripard -Tested-by: Emilio López -Signed-off-by: Daniel Lezcano ---- - .../bindings/timer/allwinner,sun5i-a13-hstimer.txt | 22 +++ - arch/arm/mach-sunxi/Kconfig | 1 + - drivers/clocksource/Kconfig | 4 + - drivers/clocksource/Makefile | 1 + - drivers/clocksource/timer-sun5i.c | 192 +++++++++++++++++++++ - 5 files changed, 220 insertions(+) - create mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt - create mode 100644 drivers/clocksource/timer-sun5i.c - -diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt -new file mode 100644 -index 0000000..7c26154 ---- /dev/null -+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt -@@ -0,0 +1,22 @@ -+Allwinner SoCs High Speed Timer Controller -+ -+Required properties: -+ -+- compatible : should be "allwinner,sun5i-a13-hstimer" or -+ "allwinner,sun7i-a20-hstimer" -+- reg : Specifies base physical address and size of the registers. -+- interrupts : The interrupts of these timers (2 for the sun5i IP, 4 for the sun7i -+ one) -+- clocks: phandle to the source clock (usually the AHB clock) -+ -+Example: -+ -+timer@01c60000 { -+ compatible = "allwinner,sun7i-a20-hstimer"; -+ reg = <0x01c60000 0x1000>; -+ interrupts = <0 51 1>, -+ <0 52 1>, -+ <0 53 1>, -+ <0 54 1>; -+ clocks = <&ahb1_gates 19>; -+}; -diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig -index e3457b9..547004c 100644 ---- a/arch/arm/mach-sunxi/Kconfig -+++ b/arch/arm/mach-sunxi/Kconfig -@@ -13,3 +13,4 @@ config ARCH_SUNXI - select PINCTRL_SUNXI - select SPARSE_IRQ - select SUN4I_TIMER -+ select SUN5I_HSTIMER -diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig -index 634c4d6..cd6950f 100644 ---- a/drivers/clocksource/Kconfig -+++ b/drivers/clocksource/Kconfig -@@ -37,6 +37,10 @@ config SUN4I_TIMER - select CLKSRC_MMIO - bool - -+config SUN5I_HSTIMER -+ select CLKSRC_MMIO -+ bool -+ - config VT8500_TIMER - bool - -diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile -index 33621ef..358358d 100644 ---- a/drivers/clocksource/Makefile -+++ b/drivers/clocksource/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o - obj-$(CONFIG_ARCH_MXS) += mxs_timer.o - obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o - obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o -+obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o - obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o - obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o - obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o -diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c -new file mode 100644 -index 0000000..bddc522 ---- /dev/null -+++ b/drivers/clocksource/timer-sun5i.c -@@ -0,0 +1,192 @@ -+/* -+ * Allwinner SoCs hstimer driver. -+ * -+ * Copyright (C) 2013 Maxime Ripard -+ * -+ * Maxime Ripard -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define TIMER_IRQ_EN_REG 0x00 -+#define TIMER_IRQ_EN(val) BIT(val) -+#define TIMER_IRQ_ST_REG 0x04 -+#define TIMER_CTL_REG(val) (0x20 * (val) + 0x10) -+#define TIMER_CTL_ENABLE BIT(0) -+#define TIMER_CTL_RELOAD BIT(1) -+#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4) -+#define TIMER_CTL_ONESHOT BIT(7) -+#define TIMER_INTVAL_LO_REG(val) (0x20 * (val) + 0x14) -+#define TIMER_INTVAL_HI_REG(val) (0x20 * (val) + 0x18) -+#define TIMER_CNTVAL_LO_REG(val) (0x20 * (val) + 0x1c) -+#define TIMER_CNTVAL_HI_REG(val) (0x20 * (val) + 0x20) -+ -+#define TIMER_SYNC_TICKS 3 -+ -+static void __iomem *timer_base; -+static u32 ticks_per_jiffy; -+ -+/* -+ * When we disable a timer, we need to wait at least for 2 cycles of -+ * the timer source clock. We will use for that the clocksource timer -+ * that is already setup and runs at the same frequency than the other -+ * timers, and we never will be disabled. -+ */ -+static void sun5i_clkevt_sync(void) -+{ -+ u32 old = readl(timer_base + TIMER_CNTVAL_LO_REG(1)); -+ -+ while ((old - readl(timer_base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS) -+ cpu_relax(); -+} -+ -+static void sun5i_clkevt_time_stop(u8 timer) -+{ -+ u32 val = readl(timer_base + TIMER_CTL_REG(timer)); -+ writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer)); -+ -+ sun5i_clkevt_sync(); -+} -+ -+static void sun5i_clkevt_time_setup(u8 timer, u32 delay) -+{ -+ writel(delay, timer_base + TIMER_INTVAL_LO_REG(timer)); -+} -+ -+static void sun5i_clkevt_time_start(u8 timer, bool periodic) -+{ -+ u32 val = readl(timer_base + TIMER_CTL_REG(timer)); -+ -+ if (periodic) -+ val &= ~TIMER_CTL_ONESHOT; -+ else -+ val |= TIMER_CTL_ONESHOT; -+ -+ writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, -+ timer_base + TIMER_CTL_REG(timer)); -+} -+ -+static void sun5i_clkevt_mode(enum clock_event_mode mode, -+ struct clock_event_device *clk) -+{ -+ switch (mode) { -+ case CLOCK_EVT_MODE_PERIODIC: -+ sun5i_clkevt_time_stop(0); -+ sun5i_clkevt_time_setup(0, ticks_per_jiffy); -+ sun5i_clkevt_time_start(0, true); -+ break; -+ case CLOCK_EVT_MODE_ONESHOT: -+ sun5i_clkevt_time_stop(0); -+ sun5i_clkevt_time_start(0, false); -+ break; -+ case CLOCK_EVT_MODE_UNUSED: -+ case CLOCK_EVT_MODE_SHUTDOWN: -+ default: -+ sun5i_clkevt_time_stop(0); -+ break; -+ } -+} -+ -+static int sun5i_clkevt_next_event(unsigned long evt, -+ struct clock_event_device *unused) -+{ -+ sun5i_clkevt_time_stop(0); -+ sun5i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS); -+ sun5i_clkevt_time_start(0, false); -+ -+ return 0; -+} -+ -+static struct clock_event_device sun5i_clockevent = { -+ .name = "sun5i_tick", -+ .rating = 340, -+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, -+ .set_mode = sun5i_clkevt_mode, -+ .set_next_event = sun5i_clkevt_next_event, -+}; -+ -+ -+static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id) -+{ -+ struct clock_event_device *evt = (struct clock_event_device *)dev_id; -+ -+ writel(0x1, timer_base + TIMER_IRQ_ST_REG); -+ evt->event_handler(evt); -+ -+ return IRQ_HANDLED; -+} -+ -+static struct irqaction sun5i_timer_irq = { -+ .name = "sun5i_timer0", -+ .flags = IRQF_TIMER | IRQF_IRQPOLL, -+ .handler = sun5i_timer_interrupt, -+ .dev_id = &sun5i_clockevent, -+}; -+ -+static u32 sun5i_timer_sched_read(void) -+{ -+ return ~readl(timer_base + TIMER_CNTVAL_LO_REG(1)); -+} -+ -+static void __init sun5i_timer_init(struct device_node *node) -+{ -+ unsigned long rate; -+ struct clk *clk; -+ int ret, irq; -+ u32 val; -+ -+ timer_base = of_iomap(node, 0); -+ if (!timer_base) -+ panic("Can't map registers"); -+ -+ irq = irq_of_parse_and_map(node, 0); -+ if (irq <= 0) -+ panic("Can't parse IRQ"); -+ -+ clk = of_clk_get(node, 0); -+ if (IS_ERR(clk)) -+ panic("Can't get timer clock"); -+ clk_prepare_enable(clk); -+ rate = clk_get_rate(clk); -+ -+ writel(~0, timer_base + TIMER_INTVAL_LO_REG(1)); -+ writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, -+ timer_base + TIMER_CTL_REG(1)); -+ -+ setup_sched_clock(sun5i_timer_sched_read, 32, rate); -+ clocksource_mmio_init(timer_base + TIMER_CNTVAL_LO_REG(1), node->name, -+ rate, 340, 32, clocksource_mmio_readl_down); -+ -+ ticks_per_jiffy = DIV_ROUND_UP(rate, HZ); -+ -+ ret = setup_irq(irq, &sun5i_timer_irq); -+ if (ret) -+ pr_warn("failed to setup irq %d\n", irq); -+ -+ /* Enable timer0 interrupt */ -+ val = readl(timer_base + TIMER_IRQ_EN_REG); -+ writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG); -+ -+ sun5i_clockevent.cpumask = cpu_possible_mask; -+ sun5i_clockevent.irq = irq; -+ -+ clockevents_config_and_register(&sun5i_clockevent, rate, -+ TIMER_SYNC_TICKS, 0xffffffff); -+} -+CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer", -+ sun5i_timer_init); -+CLOCKSOURCE_OF_DECLARE(sun7i_a20, "allwinner,sun7i-a20-hstimer", -+ sun5i_timer_init); --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/137-1-dt-sun7i-add-hstimer.patch b/target/linux/sunxi/patches-3.12/137-1-dt-sun7i-add-hstimer.patch deleted file mode 100644 index 7112ff0bce..0000000000 --- a/target/linux/sunxi/patches-3.12/137-1-dt-sun7i-add-hstimer.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 6c23e1fa6bd220b8f5665c150c83d4c016d95482 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 7 Nov 2013 12:01:48 +0100 -Subject: [PATCH] ARM: sun7i: a20: Add support for the High Speed Timers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The Allwinner A20 has support for four high speed timers. Apart for the -number of timers (4 vs 2), it's basically the same logic than the high -speed timers found in the sun5i chips. - -Now that we have a driver to support it, we can enable them in the -device tree. - -[dlezcano] : Fixed conflict with 428abbb8 "Enable the I2C controllers" - -Signed-off-by: Maxime Ripard -Tested-by: Emilio López -Signed-off-by: Daniel Lezcano ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 93f7f96..c74147a 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -405,6 +405,16 @@ - status = "disabled"; - }; - -+ hstimer@01c60000 { -+ compatible = "allwinner,sun7i-a20-hstimer"; -+ reg = <0x01c60000 0x1000>; -+ interrupts = <0 81 1>, -+ <0 82 1>, -+ <0 83 1>, -+ <0 84 1>; -+ clocks = <&ahb_gates 28>; -+ }; -+ - gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; - reg = <0x01c81000 0x1000>, --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/137-2-dt-sun5i-add-hstimer.patch b/target/linux/sunxi/patches-3.12/137-2-dt-sun5i-add-hstimer.patch deleted file mode 100644 index b209b125fe..0000000000 --- a/target/linux/sunxi/patches-3.12/137-2-dt-sun5i-add-hstimer.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 22a3eff19679e0e592e061201690670a2f5fdba7 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 7 Nov 2013 12:01:48 +0100 -Subject: [PATCH] ARM: sun5i: a13: Add support for the High Speed Timers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The Allwinner A13 has support for two high speed timers. Now that we -have a driver to support it, we can enable them in the device tree. - -Signed-off-by: Maxime Ripard -Tested-by: Emilio López -Signed-off-by: Daniel Lezcano ---- - arch/arm/boot/dts/sun5i-a13.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index ce8ef2a..1ccd75d 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -273,5 +273,12 @@ - clock-frequency = <100000>; - status = "disabled"; - }; -+ -+ timer@01c60000 { -+ compatible = "allwinner,sun5i-a13-hstimer"; -+ reg = <0x01c60000 0x1000>; -+ interrupts = <82>, <83>; -+ clocks = <&ahb_gates 28>; -+ }; - }; - }; --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/137-3-dt-sun5i-a10s-add-hstimer.patch b/target/linux/sunxi/patches-3.12/137-3-dt-sun5i-a10s-add-hstimer.patch deleted file mode 100644 index afdaa5a248..0000000000 --- a/target/linux/sunxi/patches-3.12/137-3-dt-sun5i-a10s-add-hstimer.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 5ace5467690055b1772dcac69dd1377735b8a34b Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 7 Nov 2013 12:01:48 +0100 -Subject: [PATCH] ARM: sun5i: a10s: Add support for the High Speed Timers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The Allwinner A10s has support for two high speed timers. Now that we -have a driver to support it, we can enable them in the device tree. - -Signed-off-by: Maxime Ripard -Tested-by: Emilio López -Signed-off-by: Daniel Lezcano ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index b4764be..924a2c1 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -336,5 +336,12 @@ - clock-frequency = <100000>; - status = "disabled"; - }; -+ -+ timer@01c60000 { -+ compatible = "allwinner,sun5i-a13-hstimer"; -+ reg = <0x01c60000 0x1000>; -+ interrupts = <82>, <83>; -+ clocks = <&ahb_gates 28>; -+ }; - }; - }; --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/137-4-dt-sun5i-update-hstimer-entry.patch b/target/linux/sunxi/patches-3.12/137-4-dt-sun5i-update-hstimer-entry.patch deleted file mode 100644 index df36274190..0000000000 --- a/target/linux/sunxi/patches-3.12/137-4-dt-sun5i-update-hstimer-entry.patch +++ /dev/null @@ -1,29 +0,0 @@ -From cdb1e9d50ad353833902214035a71ce08d86072a Mon Sep 17 00:00:00 2001 -From: Zoltan HERPAI -Date: Sun, 12 Jan 2014 16:48:01 +0100 -Subject: [PATCH] ARM: sun5i: dt: update hstimer entry - -Rename the hstimer DT entry to make naming consistent with the -A20 dtsi. Also to avoid confusion when switching clocksources. - -Signed-off-by: Zoltan HERPAI ---- - arch/arm/boot/dts/sun5i-a13.dtsi | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index 21900c6..e0a5cdd 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -427,7 +427,7 @@ - status = "disabled"; - }; - -- timer@01c60000 { -+ hstimer@01c60000 { - compatible = "allwinner,sun5i-a13-hstimer"; - reg = <0x01c60000 0x1000>; - interrupts = <82>, <83>; --- -1.7.0.4 - diff --git a/target/linux/sunxi/patches-3.12/140-add-a31-reset-driver.patch b/target/linux/sunxi/patches-3.12/140-add-a31-reset-driver.patch deleted file mode 100644 index 3d48a5fa1f..0000000000 --- a/target/linux/sunxi/patches-3.12/140-add-a31-reset-driver.patch +++ /dev/null @@ -1,189 +0,0 @@ -From d8d7a5805579db687fdfdfda4125b43d6a50e616 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Tue, 24 Sep 2013 11:07:43 +0300 -Subject: [PATCH] reset: Add Allwinner A31 Reset Controller Driver - -The Allwinner A31 has an IP maintaining a few other IPs in the SoC in -reset by default. Among these IPs are the High Speed Timers, hence why -we can't use the regular driver construct, and need to call the -registering function directly during machine initialisation. - -Signed-off-by: Maxime Ripard ---- - drivers/reset/Makefile | 1 + - drivers/reset/reset-sunxi.c | 156 ++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 157 insertions(+) - create mode 100644 drivers/reset/reset-sunxi.c - -diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile -index 1e2d83f..f216b74 100644 ---- a/drivers/reset/Makefile -+++ b/drivers/reset/Makefile -@@ -1 +1,2 @@ - obj-$(CONFIG_RESET_CONTROLLER) += core.o -+obj-$(CONFIG_ARCH_SUNXI) += reset-sun6i.o -diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c -new file mode 100644 -index 0000000..5bbd59a ---- /dev/null -+++ b/drivers/reset/reset-sunxi.c -@@ -0,0 +1,156 @@ -+/* -+ * Allwinner SoCs Reset Controller driver -+ * -+ * Copyright 2013 Maxime Ripard -+ * -+ * Maxime Ripard -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+struct sunxi_reset_data { -+ void __iomem *membase; -+ struct reset_controller_dev rcdev; -+}; -+ -+static int sunxi_reset_assert(struct reset_controller_dev *rcdev, -+ unsigned long id) -+{ -+ struct sunxi_reset_data *data = container_of(rcdev, -+ struct sunxi_reset_data, -+ rcdev); -+ int bank = id / BITS_PER_LONG; -+ int offset = id % BITS_PER_LONG; -+ u32 reg = readl(data->membase + (bank * 4)); -+ -+ writel(reg & ~BIT(offset), data->membase + (bank * 4)); -+ -+ return 0; -+} -+ -+static int sunxi_reset_deassert(struct reset_controller_dev *rcdev, -+ unsigned long id) -+{ -+ struct sunxi_reset_data *data = container_of(rcdev, -+ struct sunxi_reset_data, -+ rcdev); -+ int bank = id / BITS_PER_LONG; -+ int offset = id % BITS_PER_LONG; -+ u32 reg = readl(data->membase + (bank * 4)); -+ -+ writel(reg | BIT(offset), data->membase + (bank * 4)); -+ -+ return 0; -+} -+ -+static struct reset_control_ops sunxi_reset_ops = { -+ .assert = sunxi_reset_assert, -+ .deassert = sunxi_reset_deassert, -+}; -+ -+static int sunxi_reset_init(struct device_node *np) -+{ -+ struct sunxi_reset_data *data; -+ struct resource res; -+ resource_size_t size; -+ int ret; -+ -+ data = kzalloc(sizeof(*data), GFP_KERNEL); -+ if (!data) -+ return -ENOMEM; -+ -+ ret = of_address_to_resource(np, 0, &res); -+ if (ret) -+ goto err_alloc; -+ -+ size = resource_size(&res); -+ data->membase = ioremap(res.start, size); -+ if (!data->membase) { -+ ret = -ENOMEM; -+ goto err_alloc; -+ } -+ -+ data->rcdev.owner = THIS_MODULE; -+ data->rcdev.nr_resets = size * 32; -+ data->rcdev.ops = &sunxi_reset_ops; -+ data->rcdev.of_node = np; -+ reset_controller_register(&data->rcdev); -+ -+ return 0; -+ -+err_alloc: -+ kfree(data); -+ return ret; -+}; -+ -+/* -+ * These are the reset controller we need to initialize early on in -+ * our system, before we can even think of using a regular device -+ * driver for it. -+ */ -+static const struct of_device_id sunxi_early_reset_dt_ids[] __initdata = { -+ { .compatible = "allwinner,sun6i-a31-ahb1-reset", }, -+ { /* sentinel */ }, -+}; -+ -+void __init sun6i_reset_init(void) -+{ -+ struct device_node *np; -+ -+ for_each_matching_node(np, sunxi_early_reset_dt_ids) -+ sunxi_reset_init(np); -+} -+ -+/* -+ * And these are the controllers we can register through the regular -+ * device model. -+ */ -+static const struct of_device_id sunxi_reset_dt_ids[] = { -+ { .compatible = "allwinner,sun4i-clock-reset", }, -+ { /* sentinel */ }, -+}; -+MODULE_DEVICE_TABLE(of, sunxi_reset_dt_ids); -+ -+static int sunxi_reset_probe(struct platform_device *pdev) -+{ -+ return sunxi_reset_init(pdev->dev.of_node); -+} -+ -+static int sunxi_reset_remove(struct platform_device *pdev) -+{ -+ struct sunxi_reset_data *data = platform_get_drvdata(pdev); -+ -+ reset_controller_unregister(&data->rcdev); -+ iounmap(data->membase); -+ kfree(data); -+ -+ return 0; -+} -+ -+static struct platform_driver sunxi_reset_driver = { -+ .probe = sunxi_reset_probe, -+ .remove = sunxi_reset_remove, -+ .driver = { -+ .name = "sunxi-reset", -+ .owner = THIS_MODULE, -+ .of_match_table = sunxi_reset_dt_ids, -+ }, -+}; -+module_platform_driver(sunxi_reset_driver); -+ -+MODULE_AUTHOR("Maxime Ripard -Date: Tue, 24 Sep 2013 11:09:55 +0300 -Subject: [PATCH] ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER - -The A31 has a reset controller, and we have to select this option to -have access to the reset controller framework. - -Signed-off-by: Maxime Ripard ---- - arch/arm/mach-sunxi/Kconfig | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig -index bce0d42..547004c 100644 ---- a/arch/arm/mach-sunxi/Kconfig -+++ b/arch/arm/mach-sunxi/Kconfig -@@ -1,5 +1,6 @@ - config ARCH_SUNXI - bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 -+ select ARCH_HAS_RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB - select ARM_GIC - select CLKSRC_MMIO --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/143-add-dtsi-for-reset.patch b/target/linux/sunxi/patches-3.12/143-add-dtsi-for-reset.patch deleted file mode 100644 index 62ade3651e..0000000000 --- a/target/linux/sunxi/patches-3.12/143-add-dtsi-for-reset.patch +++ /dev/null @@ -1,94 +0,0 @@ -From 2a906d06b21968803ce504348864908ad1ed66ac Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Tue, 24 Sep 2013 11:10:41 +0300 -Subject: [PATCH] ARM: sun6i: Add the reset controller to the DTSI - -The A31 has a reset controller IP that maintains a few other IPs in -reset, among which we can find the UARTs, high speed timers or the I2C. -Now that we have support for them, add the reset controllers to the DTSI. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun6i-a31.dtsi | 24 ++++++++++++++++++++++++ - 1 file changed, 24 insertions(+) - -diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi -index c1751a6..c7e0658 100644 ---- a/arch/arm/boot/dts/sun6i-a31.dtsi -+++ b/arch/arm/boot/dts/sun6i-a31.dtsi -@@ -209,6 +209,24 @@ - }; - }; - -+ ahb1_rst: reset@01c202c0 { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun6i-a31-ahb1-reset"; -+ reg = <0x01c202c0 0xc>; -+ }; -+ -+ apb1_rst: reset@01c202d0 { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun4i-clock-reset"; -+ reg = <0x01c202d0 0x4>; -+ }; -+ -+ apb2_rst: reset@01c202d8 { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun4i-clock-reset"; -+ reg = <0x01c202d8 0x4>; -+ }; -+ - timer@01c20c00 { - compatible = "allwinner,sun4i-timer"; - reg = <0x01c20c00 0xa0>; -@@ -232,6 +250,7 @@ - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 16>; -+ resets = <&apb2_rst 16>; - status = "disabled"; - }; - -@@ -242,6 +261,7 @@ - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 17>; -+ resets = <&apb2_rst 17>; - status = "disabled"; - }; - -@@ -252,6 +272,7 @@ - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 18>; -+ resets = <&apb2_rst 18>; - status = "disabled"; - }; - -@@ -262,6 +283,7 @@ - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 19>; -+ resets = <&apb2_rst 19>; - status = "disabled"; - }; - -@@ -272,6 +294,7 @@ - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 20>; -+ resets = <&apb2_rst 20>; - status = "disabled"; - }; - -@@ -282,6 +305,7 @@ - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 21>; -+ resets = <&apb2_rst 21>; - status = "disabled"; - }; - --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/145-fix-reset-for-all-sunxi.patch b/target/linux/sunxi/patches-3.12/145-fix-reset-for-all-sunxi.patch deleted file mode 100644 index 130bf04e23..0000000000 --- a/target/linux/sunxi/patches-3.12/145-fix-reset-for-all-sunxi.patch +++ /dev/null @@ -1,20 +0,0 @@ -From ab2f1e0056db0e5a0717981546a69d5b81439661 Mon Sep 17 00:00:00 2001 -From: arokux -Date: Sun, 20 Oct 2013 22:59:01 +0200 -Subject: [PATCH] reset: Fix mpripard's reset patch - ---- - drivers/reset/Makefile | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile -index f216b74..cc29832 100644 ---- a/drivers/reset/Makefile -+++ b/drivers/reset/Makefile -@@ -1,2 +1,2 @@ - obj-$(CONFIG_RESET_CONTROLLER) += core.o --obj-$(CONFIG_ARCH_SUNXI) += reset-sun6i.o -+obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/150-sun4i-add-dt-bindings.patch b/target/linux/sunxi/patches-3.12/150-sun4i-add-dt-bindings.patch deleted file mode 100644 index 3bc67698bb..0000000000 --- a/target/linux/sunxi/patches-3.12/150-sun4i-add-dt-bindings.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 378dab1f11d0386e26363517922dc086227aa6c5 Mon Sep 17 00:00:00 2001 -From: arokux -Date: Thu, 19 Sep 2013 21:58:47 +0200 -Subject: [PATCH] ARM: sun4i: dt: Add bindings for USB clocks - ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++ - 1 file changed, 8 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 5e2fc45..3033684 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -89,6 +89,14 @@ - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - -+ usb:usb@0x01c200cc { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun47i-usb-gates-clk"; -+ reg = <0x01c200cc 0x4>; -+ clocks = <&pll6 1>; -+ clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/151-clk-sunxi-add-usbclocks.patch b/target/linux/sunxi/patches-3.12/151-clk-sunxi-add-usbclocks.patch deleted file mode 100644 index 2fb52f16aa..0000000000 --- a/target/linux/sunxi/patches-3.12/151-clk-sunxi-add-usbclocks.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 43c2d3189567342f68ec192f2eeab6ae4c4d1ddf Mon Sep 17 00:00:00 2001 -From: arokux -Date: Thu, 19 Sep 2013 21:59:32 +0200 -Subject: [PATCH] clk: sunxi: Add support for USB clocks - ---- - drivers/clk/sunxi/clk-sunxi.c | 5 +++++ - 1 file changed, 5 insertions(+) - -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 96c01b2..cbe1516 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -619,6 +619,10 @@ struct gates_data { - .mask = {0x7F77FFF, 0x14FB3F}, - }; - -+static const struct gates_data sun47i_usb_gates_data __initconst = { -+ .mask = {0x1C0}, -+}; -+ - static const struct gates_data sun5i_a10s_ahb_gates_data __initconst = { - .mask = {0x147667e7, 0x185915}, - }; -@@ -867,6 +871,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, - static const struct of_device_id clk_gates_match[] __initconst = { - {.compatible = "allwinner,sun4i-axi-gates-clk", .data = &sun4i_axi_gates_data,}, - {.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &sun4i_ahb_gates_data,}, -+ {.compatible = "allwinner,sun47i-usb-gates-clk", .data = &sun47i_usb_gates_data,}, - {.compatible = "allwinner,sun5i-a10s-ahb-gates-clk", .data = &sun5i_a10s_ahb_gates_data,}, - {.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,}, - {.compatible = "allwinner,sun6i-a31-ahb1-gates-clk", .data = &sun6i_a31_ahb1_gates_data,}, --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/152-sun4i-dt-add-usb-ehci-bindings.patch b/target/linux/sunxi/patches-3.12/152-sun4i-dt-add-usb-ehci-bindings.patch deleted file mode 100644 index 0a46d068d8..0000000000 --- a/target/linux/sunxi/patches-3.12/152-sun4i-dt-add-usb-ehci-bindings.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 90bc2022b61dcfd4d785416ee3aabc2157bfd57a Mon Sep 17 00:00:00 2001 -From: arokux -Date: Wed, 18 Sep 2013 00:30:04 +0200 -Subject: [PATCH] ARM: sun4i: dt: Add USB EHCI bindings - ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 33 +++++++++++++++++++++++++++++++++ - 1 file changed, 33 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 3033684..6c05264 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -15,6 +15,11 @@ - / { - interrupt-parent = <&intc>; - -+ aliases { -+ ehci1 = &ehci0; -+ ehci2 = &ehci1; -+ }; -+ - cpus { - #address-cells = <1>; - #size-cells = <0>; -@@ -407,5 +412,33 @@ - clock-frequency = <100000>; - status = "disabled"; - }; -+ -+ usb_rst: reset@0x01c200cc { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun4i-clock-reset"; -+ reg = <0x01c200cc 0x4>; -+ }; -+ -+ ehci0: ehci0@0x01c14000 { -+ compatible = "allwinner,sunxi-ehci"; -+ reg = <0x01c14000 0x400 0x01c14800 0x4 0x01c13404 0x4>; -+ interrupts = <39>; -+ resets = <&usb_rst 1>; -+ reset-names = "ehci_reset"; -+ clocks = <&usb 8>, <&ahb_gates 1>; -+ clock-names = "usb_phy", "ahb_ehci"; -+ status = "disabled"; -+ }; -+ -+ ehci1: ehci1@0x01c1c000 { -+ compatible = "allwinner,sunxi-ehci"; -+ reg = <0x01c1c000 0x400 0x01c1c800 0x4 0x01c13404 0x4>; -+ interrupts = <40>; -+ resets = <&usb_rst 2>; -+ reset-names = "ehci_reset"; -+ clocks = <&usb 8>, <&ahb_gates 3>; -+ clock-names = "usb_phy", "ahb_ehci"; -+ status = "disabled"; -+ }; - }; - }; --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/153-add-sunxi-ehci.patch b/target/linux/sunxi/patches-3.12/153-add-sunxi-ehci.patch deleted file mode 100644 index 8a78c2d54b..0000000000 --- a/target/linux/sunxi/patches-3.12/153-add-sunxi-ehci.patch +++ /dev/null @@ -1,499 +0,0 @@ -From b84d49247eb062672a56ce15f1c08f792099de97 Mon Sep 17 00:00:00 2001 -From: arokux -Date: Wed, 18 Sep 2013 21:45:03 +0200 -Subject: [PATCH] ARM: sunxi: usb: Add Allwinner sunXi EHCI driver - ---- - drivers/usb/host/Kconfig | 9 + - drivers/usb/host/Makefile | 1 + - drivers/usb/host/ehci-sunxi.c | 446 ++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 456 insertions(+) - create mode 100644 drivers/usb/host/ehci-sunxi.c - -diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig -index b3f20d7..ecc2745 100644 ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -274,6 +274,15 @@ config USB_OCTEON_EHCI - USB 2.0 device support. All CN6XXX based chips with USB are - supported. - -+config USB_SUNXI_EHCI -+ tristate "Allwinner sunXi EHCI support" -+ depends on ARCH_SUNXI -+ default n -+ help -+ Enable support for the Allwinner sunXi on-chip EHCI -+ controller. It is needed for high-speed (480Mbit/sec) -+ USB 2.0 device support. -+ - endif # USB_EHCI_HCD - - config USB_OXU210HP_HCD -diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile -index 50b0041..d2e2c8c 100644 ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -38,6 +38,7 @@ obj-$(CONFIG_USB_EHCI_S5P) += ehci-s5p.o - obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o - obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o - obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o -+obj-$(CONFIG_USB_SUNXI_EHCI) += ehci-sunxi.o - - obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o - obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o -diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c -new file mode 100644 -index 0000000..e7e15cc ---- /dev/null -+++ b/drivers/usb/host/ehci-sunxi.c -@@ -0,0 +1,446 @@ -+/* -+ * Copyright (C) 2013 Roman Byshko -+ * -+ * Roman Byshko -+ * -+ * Based on code from -+ * Allwinner Technology Co., Ltd. -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "ehci.h" -+ -+#define DRV_DESC "Allwinner sunXi EHCI driver" -+#define DRV_NAME "sunxi-ehci" -+ -+#define SUNXI_USB_PASSBY_EN 1 -+ -+#define SUNXI_EHCI_AHB_ICHR8_EN BIT(10) -+#define SUNXI_EHCI_AHB_INCR4_BURST_EN BIT(9) -+#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN BIT(8) -+#define SUNXI_EHCI_ULPI_BYPASS_EN BIT(0) -+ -+struct sunxi_ehci_hcd { -+ struct clk *phy_clk; -+ struct clk *ahb_ehci_clk; -+ struct reset_control *reset; -+ struct regulator *vbus_reg; -+ void __iomem *csr; -+ void __iomem *pmuirq; -+ int irq; -+ int id; -+}; -+ -+ -+static void usb_phy_write(struct sunxi_ehci_hcd *sunxi_ehci,u32 addr, u32 data, u32 len) -+{ -+ u32 j = 0; -+ u32 temp = 0; -+ u32 usbc_bit = 0; -+ void __iomem *dest = sunxi_ehci->csr; -+ -+ usbc_bit = BIT(sunxi_ehci->id << 1); -+ -+ for (j = 0; j < len; j++) { -+ temp = readl(dest); -+ -+ /* clear the address portion */ -+ temp &= ~(0xff << 8); -+ -+ /* set the address */ -+ temp |= ((addr + j) << 8); -+ writel(temp, dest); -+ -+ /* set the data bit and clear usbc bit*/ -+ temp = readb(dest); -+ if (data & 0x1) -+ temp |= BIT(7); -+ else -+ temp &= ~BIT(7); -+ temp &= ~usbc_bit; -+ writeb(temp, dest); -+ -+ /* flip usbc_bit */ -+ __set_bit(usbc_bit, dest); -+ __clear_bit(usbc_bit, dest); -+ -+ data >>= 1; -+ } -+} -+ -+/* FIXME: should this function be protected by a lock? -+ * ehci1 and ehci0 could call it concurrently with same csr. -+ */ -+static void sunxi_usb_phy_init(struct sunxi_ehci_hcd *sunxi_ehci) -+{ -+ /* The following comments are machine -+ * translated from Chinese, you have been warned! -+ */ -+ -+ /* adjust PHY's magnitude and rate */ -+ usb_phy_write(sunxi_ehci, 0x20, 0x14, 5); -+ -+ /* threshold adjustment disconnect */ -+ usb_phy_write(sunxi_ehci, 0x2a, 3, 2); -+ -+ return; -+} -+ -+static void sunxi_usb_passby(struct sunxi_ehci_hcd *sunxi_ehci, int enable) -+{ -+ unsigned long reg_value = 0; -+ unsigned long bits = 0; -+ static DEFINE_SPINLOCK(lock); -+ unsigned long flags = 0; -+ void __iomem *addr = sunxi_ehci->pmuirq; -+ -+ bits = SUNXI_EHCI_AHB_ICHR8_EN | -+ SUNXI_EHCI_AHB_INCR4_BURST_EN | -+ SUNXI_EHCI_AHB_INCRX_ALIGN_EN | -+ SUNXI_EHCI_ULPI_BYPASS_EN; -+ -+ spin_lock_irqsave(&lock, flags); -+ -+ reg_value = readl(addr); -+ -+ if (enable) -+ reg_value |= bits; -+ else -+ reg_value &= ~bits; -+ -+ writel(reg_value, addr); -+ -+ spin_unlock_irqrestore(&lock, flags); -+ -+ return; -+} -+ -+static void sunxi_ehci_disable(struct sunxi_ehci_hcd *sunxi_ehci) -+{ -+ regulator_disable(sunxi_ehci->vbus_reg); -+ -+ sunxi_usb_passby(sunxi_ehci, !SUNXI_USB_PASSBY_EN); -+ -+ clk_disable_unprepare(sunxi_ehci->ahb_ehci_clk); -+ clk_disable_unprepare(sunxi_ehci->phy_clk); -+ -+ reset_control_assert(sunxi_ehci->reset); -+} -+ -+static int sunxi_ehci_enable(struct sunxi_ehci_hcd *sunxi_ehci) -+{ -+ int ret; -+ -+ ret = clk_prepare_enable(sunxi_ehci->phy_clk); -+ if (ret) -+ return ret; -+ -+ ret = reset_control_deassert(sunxi_ehci->reset); -+ if (ret) -+ goto fail1; -+ -+ ret = clk_prepare_enable(sunxi_ehci->ahb_ehci_clk); -+ if (ret) -+ goto fail2; -+ -+ sunxi_usb_phy_init(sunxi_ehci); -+ -+ sunxi_usb_passby(sunxi_ehci, SUNXI_USB_PASSBY_EN); -+ -+ ret = regulator_enable(sunxi_ehci->vbus_reg); -+ if (ret) -+ goto fail3; -+ -+ return 0; -+ -+fail3: -+ clk_disable_unprepare(sunxi_ehci->ahb_ehci_clk); -+fail2: -+ reset_control_assert(sunxi_ehci->reset); -+fail1: -+ clk_disable_unprepare(sunxi_ehci->phy_clk); -+ -+ return ret; -+} -+ -+#ifdef CONFIG_PM -+static int sunxi_ehci_suspend(struct device *dev) -+{ -+ struct sunxi_ehci_hcd *sunxi_ehci = NULL; -+ struct usb_hcd *hcd = dev_get_drvdata(dev); -+ int ret; -+ -+ bool do_wakeup = device_may_wakeup(dev); -+ -+ ret = ehci_suspend(hcd, do_wakeup); -+ -+ sunxi_ehci = (struct sunxi_ehci_hcd *)hcd_to_ehci(hcd)->priv; -+ -+ sunxi_ehci_disable(sunxi_ehci); -+ -+ return ret; -+} -+ -+static int sunxi_ehci_resume(struct device *dev) -+{ -+ struct sunxi_ehci_hcd *sunxi_ehci = NULL; -+ struct usb_hcd *hcd = dev_get_drvdata(dev); -+ int ret; -+ -+ sunxi_ehci = (struct sunxi_ehci_hcd *)hcd_to_ehci(hcd)->priv; -+ -+ ret = sunxi_ehci_enable(sunxi_ehci); -+ if (ret) -+ return ret; -+ -+ return ehci_resume(hcd, false); -+} -+ -+ -+static const struct dev_pm_ops sunxi_ehci_pmops = { -+ .suspend = sunxi_ehci_suspend, -+ .resume = sunxi_ehci_resume, -+}; -+ -+#define SUNXI_EHCI_PMOPS (&sunxi_ehci_pmops) -+#else /* !CONFIG_PM */ -+#define SUNXI_EHCI_PMOPS NULL -+#endif /* CONFIG_PM */ -+ -+static const struct ehci_driver_overrides sunxi_overrides __initconst = { -+ .reset = NULL, -+ .extra_priv_size = sizeof(struct sunxi_ehci_hcd), -+}; -+ -+/* FIXME: Should there be two instances of hc_driver, -+ * or one is enough to handle two EHCI controllers? */ -+static struct hc_driver __read_mostly sunxi_ehci_hc_driver; -+ -+static int sunxi_ehci_init(struct platform_device *pdev, struct usb_hcd *hcd, -+ struct sunxi_ehci_hcd *sunxi_ehci) -+{ -+ void __iomem *ehci_regs = NULL; -+ struct resource *res = NULL; -+ -+ sunxi_ehci->vbus_reg = devm_regulator_get(&pdev->dev, "vbus"); -+ if (IS_ERR(sunxi_ehci->vbus_reg)) { -+ if (PTR_ERR(sunxi_ehci->vbus_reg) == -EPROBE_DEFER) -+ return -EPROBE_DEFER; -+ -+ dev_info(&pdev->dev, "no USB VBUS power supply found\n"); -+ } -+ -+ sunxi_ehci->id = of_alias_get_id(pdev->dev.of_node, "ehci"); -+ if (sunxi_ehci->id < 0) -+ return sunxi_ehci->id; -+ -+ /* FIXME: should res be freed on some failure? */ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "failed to get I/O memory\n"); -+ return -ENXIO; -+ } -+ ehci_regs = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(ehci_regs)) -+ return PTR_ERR(ehci_regs); -+ -+ hcd->rsrc_start = res->start; -+ hcd->rsrc_len = resource_size(res); -+ hcd->regs = ehci_regs; -+ hcd_to_ehci(hcd)->caps = ehci_regs; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ if (!res) { -+ dev_err(&pdev->dev, "failed to get I/O memory\n"); -+ return -ENXIO; -+ } -+ sunxi_ehci->pmuirq = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(sunxi_ehci->pmuirq)) -+ return PTR_ERR(sunxi_ehci->pmuirq); -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 2); -+ if (!res) { -+ dev_err(&pdev->dev, "failed to get I/O memory\n"); -+ return -ENXIO; -+ } -+ -+ /* FIXME: this one byte needs to be shared between both EHCIs, -+ * that is why ioremap instead of devm_ioremap_resource, -+ * memory is not unmaped back for now. -+ */ -+ sunxi_ehci->csr = ioremap(res->start, resource_size(res)); -+ if (IS_ERR(sunxi_ehci->csr)) { -+ dev_err(&pdev->dev, "failed to remap memory\n"); -+ return PTR_ERR(sunxi_ehci->csr); -+ } -+ -+ sunxi_ehci->irq = platform_get_irq(pdev, 0); -+ if (!sunxi_ehci->irq) { -+ dev_err(&pdev->dev, "failed to get IRQ\n"); -+ return -ENODEV; -+ } -+ -+ sunxi_ehci->phy_clk = devm_clk_get(&pdev->dev, "usb_phy"); -+ if (IS_ERR(sunxi_ehci->phy_clk)) { -+ dev_err(&pdev->dev, "failed to get usb_phy clock\n"); -+ return PTR_ERR(sunxi_ehci->phy_clk); -+ } -+ sunxi_ehci->ahb_ehci_clk = devm_clk_get(&pdev->dev, "ahb_ehci"); -+ if (IS_ERR(sunxi_ehci->ahb_ehci_clk)) { -+ dev_err(&pdev->dev, "failed to get ahb_ehci clock\n"); -+ return PTR_ERR(sunxi_ehci->ahb_ehci_clk); -+ } -+ -+ sunxi_ehci->reset = reset_control_get(&pdev->dev, "ehci_reset"); -+ if (IS_ERR(sunxi_ehci->reset)) -+ { -+ dev_err(&pdev->dev, "failed to get ehci_reset reset line\n"); -+ return PTR_ERR(sunxi_ehci->reset); -+ } -+ -+ return 0; -+} -+ -+static int sunxi_ehci_probe(struct platform_device *pdev) -+{ -+ struct sunxi_ehci_hcd *sunxi_ehci = NULL; -+ struct usb_hcd *hcd = NULL; -+ int ret; -+ -+ if (pdev->num_resources != 4) { -+ dev_err(&pdev->dev, "invalid number of resources: %i\n", -+ pdev->num_resources); -+ return -ENODEV; -+ } -+ -+ if (pdev->resource[0].flags != IORESOURCE_MEM -+ || pdev->resource[1].flags != IORESOURCE_MEM -+ || pdev->resource[2].flags != IORESOURCE_MEM -+ || pdev->resource[3].flags != IORESOURCE_IRQ) { -+ dev_err(&pdev->dev, "invalid resource type\n"); -+ return -ENODEV; -+ } -+ -+ if (!pdev->dev.dma_mask) -+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -+ if (!pdev->dev.coherent_dma_mask) -+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); -+ -+ hcd = usb_create_hcd(&sunxi_ehci_hc_driver, &pdev->dev, -+ dev_name(&pdev->dev)); -+ if (!hcd) { -+ dev_err(&pdev->dev, "unable to create HCD\n"); -+ return -ENOMEM; -+ } -+ -+ platform_set_drvdata(pdev, hcd); -+ -+ sunxi_ehci = (struct sunxi_ehci_hcd *)hcd_to_ehci(hcd)->priv; -+ ret = sunxi_ehci_init(pdev, hcd, sunxi_ehci); -+ if (ret) -+ goto fail1; -+ -+ ret = sunxi_ehci_enable(sunxi_ehci); -+ if (ret) -+ goto fail1; -+ -+ ret = usb_add_hcd(hcd, sunxi_ehci->irq, IRQF_SHARED | IRQF_DISABLED); -+ if (ret) { -+ dev_err(&pdev->dev, "failed to add USB HCD\n"); -+ goto fail2; -+ } -+ -+ return 0; -+ -+fail2: -+ sunxi_ehci_disable(sunxi_ehci); -+ -+fail1: -+ usb_put_hcd(hcd); -+ return ret; -+} -+ -+static int sunxi_ehci_remove(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(pdev); -+ struct sunxi_ehci_hcd *sunxi_ehci = NULL; -+ -+ sunxi_ehci = (struct sunxi_ehci_hcd *)hcd_to_ehci(hcd)->priv; -+ -+ usb_remove_hcd(hcd); -+ -+ sunxi_ehci_disable(sunxi_ehci); -+ -+ usb_put_hcd(hcd); -+ -+ return 0; -+} -+ -+static void sunxi_ehci_shutdown(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(pdev); -+ struct sunxi_ehci_hcd *sunxi_ehci = NULL; -+ -+ sunxi_ehci = (struct sunxi_ehci_hcd *)hcd_to_ehci(hcd)->priv; -+ -+ usb_hcd_platform_shutdown(pdev); -+ -+ sunxi_ehci_disable(sunxi_ehci); -+} -+ -+static const struct of_device_id ehci_of_match[] = { -+ {.compatible = "allwinner,sunxi-ehci"}, -+ {}, -+}; -+ -+static struct platform_driver ehci_sunxi_driver = { -+ .driver = { -+ .of_match_table = ehci_of_match, -+ .name = DRV_NAME, -+ .pm = SUNXI_EHCI_PMOPS, -+ }, -+ .probe = sunxi_ehci_probe, -+ .remove = sunxi_ehci_remove, -+ .shutdown = sunxi_ehci_shutdown, -+}; -+ -+static int __init sunxi_ehci_init_module(void) -+{ -+ if (usb_disabled()) -+ return -ENODEV; -+ -+ pr_info(DRV_NAME ": " DRV_DESC "\n"); -+ -+ ehci_init_driver(&sunxi_ehci_hc_driver, &sunxi_overrides); -+ -+ return platform_driver_register(&ehci_sunxi_driver); -+} -+module_init(sunxi_ehci_init_module); -+ -+static void __exit sunxi_ehci_exit_module(void) -+{ -+ platform_driver_unregister(&ehci_sunxi_driver); -+} -+module_exit(sunxi_ehci_exit_module); -+ -+MODULE_DESCRIPTION(DRIVER_DESC); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:" DRV_NAME); -+MODULE_DEVICE_TABLE(of, ehci_of_match); -+MODULE_AUTHOR("Roman Byshko "); --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/154-add-ehci-for-a1000.patch b/target/linux/sunxi/patches-3.12/154-add-ehci-for-a1000.patch deleted file mode 100644 index dee5b1b38e..0000000000 --- a/target/linux/sunxi/patches-3.12/154-add-ehci-for-a1000.patch +++ /dev/null @@ -1,82 +0,0 @@ -From bc8138b4218307a8f25076ec5c8c1eae1e5e8d78 Mon Sep 17 00:00:00 2001 -From: arokux -Date: Wed, 18 Sep 2013 00:30:40 +0200 -Subject: [PATCH] ARM: sun4i: dt: Add EHCI bindings to the Mele A1000 - ---- - arch/arm/boot/dts/sun4i-a10-a1000.dts | 46 +++++++++++++++++++++++++++++++++++ - 1 file changed, 46 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts -index eb4d73b..68c705d 100644 ---- a/arch/arm/boot/dts/sun4i-a10-a1000.dts -+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts -@@ -53,6 +53,20 @@ - allwinner,drive = <0>; - allwinner,pull = <0>; - }; -+ -+ usb1_vbus_pin: usb1_vbus_pin@0 { -+ allwinner,pins = "PH6"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <2>; -+ }; -+ -+ usb2_vbus_pin: usb2_vbus_pin@0 { -+ allwinner,pins = "PH3"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <2>; -+ }; - }; - - uart0: serial@01c28000 { -@@ -66,6 +80,16 @@ - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; -+ -+ ehci0: ehci0@0x01c14000 { -+ vbus-supply = <®_usb1_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci1: ehci1@0x01c1c000 { -+ vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; - }; - - leds { -@@ -97,5 +121,27 @@ - enable-active-high; - gpio = <&pio 7 15 0>; - }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb1_vbus_pin>; -+ regulator-name = "usb1-vbus"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ enable-active-high; -+ gpio = <&pio 7 6 0>; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb2_vbus_pin>; -+ regulator-name = "usb2-vbus"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ enable-active-high; -+ gpio = <&pio 7 3 0>; -+ }; - }; - }; --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/155-add-ehci-for-cubieboard-a10.patch b/target/linux/sunxi/patches-3.12/155-add-ehci-for-cubieboard-a10.patch deleted file mode 100644 index 2cb98ae5ff..0000000000 --- a/target/linux/sunxi/patches-3.12/155-add-ehci-for-cubieboard-a10.patch +++ /dev/null @@ -1,85 +0,0 @@ -From bf96cf461ca2d36e962a4acf83f6f779a05c7df3 Mon Sep 17 00:00:00 2001 -From: arokux -Date: Wed, 18 Sep 2013 22:45:06 +0200 -Subject: [PATCH] ARM: sun4i: dt: Add EHCI bindings to Cubieboard-A10 - ---- - arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 50 ++++++++++++++++++++++++++++++ - 1 file changed, 50 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -index 425a7db..eb6c3c1 100644 ---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -@@ -49,6 +49,20 @@ - allwinner,drive = <1>; - allwinner,pull = <0>; - }; -+ -+ usb1_vbus_pin: usb1_vbus_pin@0 { -+ allwinner,pins = "PH6"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <2>; -+ }; -+ -+ usb2_vbus_pin: usb2_vbus_pin@0 { -+ allwinner,pins = "PH3"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <2>; -+ }; - }; - - uart0: serial@01c28000 { -@@ -68,6 +82,16 @@ - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; -+ -+ ehci0: ehci0@0x01c14000 { -+ vbus-supply = <®_usb1_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci1: ehci1@0x01c1c000 { -+ vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; - }; - - leds { -@@ -86,4 +110,30 @@ - linux,default-trigger = "heartbeat"; - }; - }; -+ -+ regulators { -+ compatible = "simple-bus"; -+ -+ reg_usb1_vbus: usb1-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb1_vbus_pin>; -+ regulator-name = "usb1-vbus"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ enable-active-high; -+ gpio = <&pio 7 6 0>; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb2_vbus_pin>; -+ regulator-name = "usb2-vbus"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ enable-active-high; -+ gpio = <&pio 7 3 0>; -+ }; -+ }; - }; --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/156-sun7i-add-dt-bindings-for-usbclocks.patch b/target/linux/sunxi/patches-3.12/156-sun7i-add-dt-bindings-for-usbclocks.patch deleted file mode 100644 index 5dfbc5e6c6..0000000000 --- a/target/linux/sunxi/patches-3.12/156-sun7i-add-dt-bindings-for-usbclocks.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 336d23a348d6595cac9a282616e983dddb7c7600 Mon Sep 17 00:00:00 2001 -From: arokux -Date: Thu, 19 Sep 2013 21:24:20 +0200 -Subject: [PATCH] ARM: sun7i: dt: Add bindings for USB clocks - ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++ - 1 file changed, 8 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 81e6e74..4fe484c 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -85,6 +85,14 @@ - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - -+ usb:usb@0x01c200cc { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun47i-usb-gates-clk"; -+ reg = <0x01c200cc 0x4>; -+ clocks = <&pll6 1>; -+ clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; -+ }; -+ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-cpu-clk"; --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/157-sun7i-add-dt-usb-ehci-bindings.patch b/target/linux/sunxi/patches-3.12/157-sun7i-add-dt-usb-ehci-bindings.patch deleted file mode 100644 index db7905f9b0..0000000000 --- a/target/linux/sunxi/patches-3.12/157-sun7i-add-dt-usb-ehci-bindings.patch +++ /dev/null @@ -1,62 +0,0 @@ -From b434c5aa38e2db0fff9fa39c6e47cc9d13afe8e1 Mon Sep 17 00:00:00 2001 -From: arokux -Date: Thu, 19 Sep 2013 21:36:10 +0200 -Subject: [PATCH] ARM: sun7i: dt: Add USB EHCI bindings - ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 33 +++++++++++++++++++++++++++++++++ - 1 file changed, 33 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 4fe484c..b4e4a5a 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -16,6 +16,11 @@ - / { - interrupt-parent = <&gic>; - -+ aliases { -+ ehci1 = &ehci0; -+ ehci2 = &ehci1; -+ }; -+ - cpus { - #address-cells = <1>; - #size-cells = <0>; -@@ -434,5 +439,33 @@ - #interrupt-cells = <3>; - interrupts = <1 9 0xf04>; - }; -+ -+ usb_rst: reset@0x01c200cc { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun4i-clock-reset"; -+ reg = <0x01c200cc 0x4>; -+ }; -+ -+ ehci0: ehci0@0x01c14000 { -+ compatible = "allwinner,sunxi-ehci"; -+ reg = <0x01c14000 0x400 0x01c14800 0x4 0x01c13404 0x4>; -+ interrupts = <0 39 1>; -+ resets = <&usb_rst 1>; -+ reset-names = "ehci_reset"; -+ clocks = <&usb 8>, <&ahb_gates 1>; -+ clock-names = "usb_phy", "ahb_ehci"; -+ status = "disabled"; -+ }; -+ -+ ehci1: ehci1@0x01c1c000 { -+ compatible = "allwinner,sunxi-ehci"; -+ reg = <0x01c1c000 0x400 0x01c1c800 0x4 0x01c13404 0x4>; -+ interrupts = <0 40 1>; -+ resets = <&usb_rst 2>; -+ reset-names = "ehci_reset"; -+ clocks = <&usb 8>, <&ahb_gates 3>; -+ clock-names = "usb_phy", "ahb_ehci"; -+ status = "disabled"; -+ }; - }; - }; --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/158-sun5i-add-dt-bindings-for-usbclocks.patch b/target/linux/sunxi/patches-3.12/158-sun5i-add-dt-bindings-for-usbclocks.patch deleted file mode 100644 index a8dd56e46d..0000000000 --- a/target/linux/sunxi/patches-3.12/158-sun5i-add-dt-bindings-for-usbclocks.patch +++ /dev/null @@ -1,31 +0,0 @@ -From f4eb27ab7c9893a65fd414451459899cdd6334a7 Mon Sep 17 00:00:00 2001 -From: arokux -Date: Tue, 24 Sep 2013 20:02:39 +0200 -Subject: [PATCH] ARM: sun5i: dt: Add bindings for USB Host clocks - ---- - arch/arm/boot/dts/sun5i-a13.dtsi | 8 ++++++++ - 1 file changed, 8 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index 9ac706a..aad270c 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -90,6 +90,14 @@ - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - -+ usb:usb@0x01c200cc { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun5i-usb-gates-clk"; -+ reg = <0x01c200cc 0x4>; -+ clocks = <&pll6 1>; -+ clock-output-names = "usb_ohci0", "usb_phy"; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/159-sun5i-add-support-for-usbclocks.patch b/target/linux/sunxi/patches-3.12/159-sun5i-add-support-for-usbclocks.patch deleted file mode 100644 index c9445a2d34..0000000000 --- a/target/linux/sunxi/patches-3.12/159-sun5i-add-support-for-usbclocks.patch +++ /dev/null @@ -1,35 +0,0 @@ -From aaf8700dfa1b19bbb994e2996bd293190c0cefbd Mon Sep 17 00:00:00 2001 -From: arokux -Date: Sun, 6 Oct 2013 14:04:50 +0200 -Subject: [PATCH] clk: sun5i: Add support for USB clocks - ---- - drivers/clk/sunxi/clk-sunxi.c | 5 +++++ - 1 file changed, 5 insertions(+) - -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index cbe1516..f9b8b18 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -623,6 +623,10 @@ struct gates_data { - .mask = {0x1C0}, - }; - -+static const struct gates_data sun5i_usb_gates_data __initconst = { -+ .mask = {0x140}, -+}; -+ - static const struct gates_data sun5i_a10s_ahb_gates_data __initconst = { - .mask = {0x147667e7, 0x185915}, - }; -@@ -874,6 +878,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, - {.compatible = "allwinner,sun47i-usb-gates-clk", .data = &sun47i_usb_gates_data,}, - {.compatible = "allwinner,sun5i-a10s-ahb-gates-clk", .data = &sun5i_a10s_ahb_gates_data,}, - {.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,}, -+ {.compatible = "allwinner,sun5i-usb-gates-clk", .data = &sun5i_usb_gates_data,}, - {.compatible = "allwinner,sun6i-a31-ahb1-gates-clk", .data = &sun6i_a31_ahb1_gates_data,}, - {.compatible = "allwinner,sun7i-a20-ahb-gates-clk", .data = &sun7i_a20_ahb_gates_data,}, - {.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &sun4i_apb0_gates_data,}, --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/160-sun5i-dt-add-usb-ehci-bindings.patch b/target/linux/sunxi/patches-3.12/160-sun5i-dt-add-usb-ehci-bindings.patch deleted file mode 100644 index 0f7259841b..0000000000 --- a/target/linux/sunxi/patches-3.12/160-sun5i-dt-add-usb-ehci-bindings.patch +++ /dev/null @@ -1,50 +0,0 @@ -From d3f751a7afe959d53c2b9e71a25921aeb38e0837 Mon Sep 17 00:00:00 2001 -From: arokux -Date: Tue, 24 Sep 2013 20:03:40 +0200 -Subject: [PATCH] ARM: sun5i: dt: Add USB EHCI bindings - ---- - arch/arm/boot/dts/sun5i-a13.dtsi | 21 +++++++++++++++++++++ - 1 file changed, 21 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index aad270c..a271a2d 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -16,6 +16,10 @@ - / { - interrupt-parent = <&intc>; - -+ aliases { -+ ehci1 = &ehci0; -+ }; -+ - cpus { - #address-cells = <1>; - #size-cells = <0>; -@@ -310,5 +314,22 @@ - interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; - }; -+ -+ usb_rst: reset@0x01c200cc { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun4i-clock-reset"; -+ reg = <0x01c200cc 0x4>; -+ }; -+ -+ ehci0: ehci0@0x01c14000 { -+ compatible = "allwinner,sunxi-ehci"; -+ reg = <0x01c14000 0x400 0x01c14800 0x4 0x01c13404 0x4>; -+ interrupts = <39>; -+ resets = <&usb_rst 1>; -+ reset-names = "ehci_reset"; -+ clocks = <&usb 8>, <&ahb_gates 1>; -+ clock-names = "usb_phy", "ahb_ehci"; -+ status = "disabled"; -+ }; - }; - }; --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/161-sun5i-add-dt-ehci-for-a13-olinuxino.patch b/target/linux/sunxi/patches-3.12/161-sun5i-add-dt-ehci-for-a13-olinuxino.patch deleted file mode 100644 index 362d85b1c5..0000000000 --- a/target/linux/sunxi/patches-3.12/161-sun5i-add-dt-ehci-for-a13-olinuxino.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 0944583d288e594d10ed0015b3d45839c70f8931 Mon Sep 17 00:00:00 2001 -From: arokux -Date: Tue, 24 Sep 2013 20:07:53 +0200 -Subject: [PATCH] ARM: sun5i: dt: Add EHCI bindings to A13-Olinuxino - ---- - arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 27 +++++++++++++++++++++++++++ - 1 file changed, 27 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -index 9e508dc..e30b89f 100644 ---- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -@@ -30,6 +30,13 @@ - allwinner,drive = <1>; - allwinner,pull = <0>; - }; -+ -+ usb1_vbus_pin: usb1_vbus_pin@0 { -+ allwinner,pins = "PG11"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <2>; -+ }; - }; - - uart1: serial@01c28400 { -@@ -55,6 +62,11 @@ - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; -+ -+ ehci0: ehci0@0x01c14000 { -+ vbus-supply = <®_usb1_vbus>; -+ status = "okay"; -+ }; - }; - - leds { -@@ -67,4 +79,19 @@ - default-state = "on"; - }; - }; -+ -+ regulators { -+ compatible = "simple-bus"; -+ -+ reg_usb1_vbus: usb1-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb1_vbus_pin>; -+ regulator-name = "usb1-vbus"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ enable-active-high; -+ gpio = <&pio 6 11 0>; -+ }; -+ }; - }; --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/162-1-dt-sun7i-add-ehci-for-a20-olinuxino.patch b/target/linux/sunxi/patches-3.12/162-1-dt-sun7i-add-ehci-for-a20-olinuxino.patch deleted file mode 100644 index 40706d2e23..0000000000 --- a/target/linux/sunxi/patches-3.12/162-1-dt-sun7i-add-ehci-for-a20-olinuxino.patch +++ /dev/null @@ -1,84 +0,0 @@ -From 630ccdf33652f8e35b8c84e939d5a86fad9612e2 Mon Sep 17 00:00:00 2001 -From: arokux -Date: Thu, 19 Sep 2013 21:50:21 +0200 -Subject: [PATCH] ARM: sun7i: dt: Add USB EHCI bindings for A20-Olinuxino - ---- - arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 49 +++++++++++++++++++++++++ - 1 file changed, 49 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -index ead3013..e6b1e26 100644 ---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -@@ -41,6 +41,20 @@ - allwinner,drive = <1>; - allwinner,pull = <0>; - }; -+ -+ usb1_vbus_pin: usb1_vbus_pin@0 { -+ allwinner,pins = "PH6"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <2>; -+ }; -+ -+ usb2_vbus_pin: usb2_vbus_pin@0 { -+ allwinner,pins = "PH3"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <2>; -+ }; - }; - - uart0: serial@01c28000 { -@@ -76,6 +90,15 @@ - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; -+ }; -+ -+ ehci0: ehci0@0x01c14000 { -+ vbus-supply = <®_usb1_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci1: ehci1@0x01c1c000 { -+ vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - }; -@@ -91,4 +114,30 @@ - default-state = "on"; - }; - }; -+ -+ regulators { -+ compatible = "simple-bus"; -+ -+ reg_usb1_vbus: usb1-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb1_vbus_pin>; -+ regulator-name = "usb1-vbus"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ enable-active-high; -+ gpio = <&pio 7 6 0>; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb2_vbus_pin>; -+ regulator-name = "usb2-vbus"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ enable-active-high; -+ gpio = <&pio 7 3 0>; -+ }; -+ }; - }; --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/162-2-dt-sun7i-add-ehci-for-cb2.patch b/target/linux/sunxi/patches-3.12/162-2-dt-sun7i-add-ehci-for-cb2.patch deleted file mode 100644 index 0f00c2564e..0000000000 --- a/target/linux/sunxi/patches-3.12/162-2-dt-sun7i-add-ehci-for-cb2.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 8ba068f40cce9612d2ac0879b6978274ab497d31 Mon Sep 17 00:00:00 2001 -From: arokux -Date: Thu, 19 Sep 2013 21:29:45 +0200 -Subject: [PATCH] ARM: sun7i: dt: Add USB EHCI bindings for Cubieboard2 - -Signed-off-by: Hans de Goede - -Conflicts: - arch/arm/boot/dts/sun7i-a20-cubieboard2.dts ---- - arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 45 +++++++++++++++++++++++++++++ - 1 file changed, 45 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -index a26711c..10ea99d 100644 ---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -@@ -54,6 +54,20 @@ - allwinner,drive = <0>; - allwinner,pull = <0>; - }; -+ -+ usb1_vbus_pin: usb1_vbus_pin@0 { -+ allwinner,pins = "PH6"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <2>; -+ }; -+ -+ usb2_vbus_pin: usb2_vbus_pin@0 { -+ allwinner,pins = "PH3"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <2>; -+ }; - }; - - uart0: serial@01c28000 { -@@ -71,6 +85,15 @@ - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; -+ }; -+ -+ ehci0: ehci0@0x01c14000 { -+ vbus-supply = <®_usb1_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci1: ehci1@0x01c1c000 { -+ vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - -@@ -112,5 +135,27 @@ - gpio = <&pio 1 8 0>; - enable-active-high; - }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb1_vbus_pin>; -+ regulator-name = "usb1-vbus"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ enable-active-high; -+ gpio = <&pio 7 6 0>; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb2_vbus_pin>; -+ regulator-name = "usb2-vbus"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ enable-active-high; -+ gpio = <&pio 7 3 0>; -+ }; - }; - }; --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/163-dt-sun7i-fix-ehci-irqtypes.patch b/target/linux/sunxi/patches-3.12/163-dt-sun7i-fix-ehci-irqtypes.patch deleted file mode 100644 index 8a5aa38cfa..0000000000 --- a/target/linux/sunxi/patches-3.12/163-dt-sun7i-fix-ehci-irqtypes.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 9468f2e1fb54a67c70f627b3cc75a692b3c2ebce Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Tue, 17 Dec 2013 23:26:45 +0100 -Subject: [PATCH] ARM: dts: sun7i: Fix ehci interrupt types - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 9f99959..dcee675 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -648,7 +648,7 @@ - ehci0: ehci0@0x01c14000 { - compatible = "allwinner,sunxi-ehci"; - reg = <0x01c14000 0x400 0x01c14800 0x4 0x01c13404 0x4>; -- interrupts = <0 39 1>; -+ interrupts = <0 39 4>; - resets = <&usb_rst 1>; - reset-names = "ehci_reset"; - clocks = <&usb 8>, <&ahb_gates 1>; -@@ -659,7 +659,7 @@ - ehci1: ehci1@0x01c1c000 { - compatible = "allwinner,sunxi-ehci"; - reg = <0x01c1c000 0x400 0x01c1c800 0x4 0x01c13404 0x4>; -- interrupts = <0 40 1>; -+ interrupts = <0 40 4>; - resets = <&usb_rst 2>; - reset-names = "ehci_reset"; - clocks = <&usb 8>, <&ahb_gates 3>; --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/164-sunxi-ehci-fix-resource-check.patch b/target/linux/sunxi/patches-3.12/164-sunxi-ehci-fix-resource-check.patch deleted file mode 100644 index 96bfbe2bd1..0000000000 --- a/target/linux/sunxi/patches-3.12/164-sunxi-ehci-fix-resource-check.patch +++ /dev/null @@ -1,27 +0,0 @@ -From e8966070a22744582a2b7b63d8dab82f05499eb2 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Tue, 17 Dec 2013 23:27:03 +0100 -Subject: [PATCH] ARM: sunxi-ehci: Fix resource check - -Signed-off-by: Hans de Goede ---- - drivers/usb/host/ehci-sunxi.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c -index e7e15cc..e050d78 100644 ---- a/drivers/usb/host/ehci-sunxi.c -+++ b/drivers/usb/host/ehci-sunxi.c -@@ -332,7 +332,8 @@ static int sunxi_ehci_probe(struct platform_device *pdev) - if (pdev->resource[0].flags != IORESOURCE_MEM - || pdev->resource[1].flags != IORESOURCE_MEM - || pdev->resource[2].flags != IORESOURCE_MEM -- || pdev->resource[3].flags != IORESOURCE_IRQ) { -+ || (pdev->resource[3].flags & IORESOURCE_TYPE_BITS) -+ != IORESOURCE_IRQ) { - dev_err(&pdev->dev, "invalid resource type\n"); - return -ENODEV; - } --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/165-dt-usb-update-vbus-voltage.patch b/target/linux/sunxi/patches-3.12/165-dt-usb-update-vbus-voltage.patch deleted file mode 100644 index 0db0f2b8f6..0000000000 --- a/target/linux/sunxi/patches-3.12/165-dt-usb-update-vbus-voltage.patch +++ /dev/null @@ -1,109 +0,0 @@ -From b0a614458fb67fdb53e1b5518dabb85d688b196e Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Tue, 17 Dec 2013 22:59:17 +0100 -Subject: [PATCH] ARM: dts: sunxi: usb Vbus is 5v not 3.3v - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun4i-a10-a1000.dts | 8 ++++---- - arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 8 ++++---- - arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 4 ++-- - arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8 ++++---- - 4 files changed, 14 insertions(+), 14 deletions(-) - -diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts -index e3bfc59..315e607 100644 ---- a/arch/arm/boot/dts/sun4i-a10-a1000.dts -+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts -@@ -147,8 +147,8 @@ - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin>; - regulator-name = "usb1-vbus"; -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&pio 7 6 0>; - }; -@@ -158,8 +158,8 @@ - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin>; - regulator-name = "usb2-vbus"; -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&pio 7 3 0>; - }; -diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -index 48864a4..0bd2aae 100644 ---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -@@ -158,8 +158,8 @@ - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin>; - regulator-name = "usb1-vbus"; -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&pio 7 6 0>; - }; -@@ -169,8 +169,8 @@ - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin>; - regulator-name = "usb2-vbus"; -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&pio 7 3 0>; - }; -diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -index 4b73e3e..b255d1b 100644 ---- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -@@ -104,8 +104,8 @@ - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin>; - regulator-name = "usb1-vbus"; -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&pio 6 11 0>; - }; -diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -index 10ea99d..144b11a 100644 ---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -@@ -141,8 +141,8 @@ - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin>; - regulator-name = "usb1-vbus"; -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&pio 7 6 0>; - }; -@@ -152,8 +152,8 @@ - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin>; - regulator-name = "usb2-vbus"; -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&pio 7 3 0>; - }; --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/170-sunxi-sid-initial.patch b/target/linux/sunxi/patches-3.12/170-sunxi-sid-initial.patch deleted file mode 100644 index 8407b2f998..0000000000 --- a/target/linux/sunxi/patches-3.12/170-sunxi-sid-initial.patch +++ /dev/null @@ -1,290 +0,0 @@ -From 1d4b3ab562fa87e2c7f05cf92af1ff4b6cd42581 Mon Sep 17 00:00:00 2001 -From: Oliver Schinagl -Date: Tue, 3 Sep 2013 12:33:27 +0200 -Subject: [PATCH] ARM: sunxi: Initial support for Allwinner's Security ID fuses - -Allwinner has electric fuses (efuse) on their line of chips. This driver -reads those fuses, seeds the kernel entropy and exports them as a sysfs -node. - -These fuses are most likely to be programmed at the factory, encoding -things like Chip ID, some sort of serial number, etc. and appear to be -reasonably unique. -While in theory, these should be writeable by the user, it will probably -be inconvenient to do so. Allwinner recommends that a certain input pin, -labeled 'efuse_vddq', be connected to GND. To write these fuses however, -a 2.5 V programming voltage needs to be applied to this pin. - -Even so, they can still be used to generate a board-unique mac from, -board unique RSA key and seed the kernel RNG. - -On sun7i additional storage is available, this is initially used for an -UEFI BOOT key, Secure JTAG key, HDMI-HDCP key and vendor specific keys. - -Currently supported are the following known chips: -Allwinner sun4i (A10) -Allwinner sun5i (A10s, A13) -Allwinner sun7i (A20) - -Signed-off-by: Oliver Schinagl ---- - Documentation/ABI/testing/sysfs-driver-sunxi-sid | 22 +++ - .../bindings/misc/allwinner,sunxi-sid.txt | 17 +++ - drivers/misc/eeprom/Kconfig | 13 ++ - drivers/misc/eeprom/Makefile | 1 + - drivers/misc/eeprom/sunxi_sid.c | 158 +++++++++++++++++++++ - 5 files changed, 211 insertions(+) - create mode 100644 Documentation/ABI/testing/sysfs-driver-sunxi-sid - create mode 100644 Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt - create mode 100644 drivers/misc/eeprom/sunxi_sid.c - -diff --git a/Documentation/ABI/testing/sysfs-driver-sunxi-sid b/Documentation/ABI/testing/sysfs-driver-sunxi-sid -new file mode 100644 -index 0000000..ffb9536 ---- /dev/null -+++ b/Documentation/ABI/testing/sysfs-driver-sunxi-sid -@@ -0,0 +1,22 @@ -+What: /sys/devices/*//eeprom -+Date: August 2013 -+Contact: Oliver Schinagl -+Description: read-only access to the SID (Security-ID) on current -+ A-series SoC's from Allwinner. Currently supports A10, A10s, A13 -+ and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes, -+ whereas the newer A20 SoC exposes 512 bytes split into sections. -+ Besides the 16 bytes of SID, there's also an SJTAG area, -+ HDMI-HDCP key and some custom keys. Below a quick overview, for -+ details see the user manual: -+ 0x000 128 bit root-key (sun[457]i) -+ 0x010 128 bit boot-key (sun7i) -+ 0x020 64 bit security-jtag-key (sun7i) -+ 0x028 16 bit key configuration (sun7i) -+ 0x02b 16 bit custom-vendor-key (sun7i) -+ 0x02c 320 bit low general key (sun7i) -+ 0x040 32 bit read-control access (sun7i) -+ 0x064 224 bit low general key (sun7i) -+ 0x080 2304 bit HDCP-key (sun7i) -+ 0x1a0 768 bit high general key (sun7i) -+Users: any user space application which wants to read the SID on -+ Allwinner's A-series of CPU's. -diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt -new file mode 100644 -index 0000000..68ba372 ---- /dev/null -+++ b/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt -@@ -0,0 +1,17 @@ -+Allwinner sunxi-sid -+ -+Required properties: -+- compatible: "allwinner,sun4i-sid" or "allwinner,sun7i-a20-sid". -+- reg: Should contain registers location and length -+ -+Example for sun4i: -+ sid@01c23800 { -+ compatible = "allwinner,sun4i-sid"; -+ reg = <0x01c23800 0x10> -+ }; -+ -+Example for sun7i: -+ sid@01c23800 { -+ compatible = "allwinner,sun7i-a20-sid"; -+ reg = <0x01c23800 0x200> -+ }; -diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig -index 04f2e1f..9536852f 100644 ---- a/drivers/misc/eeprom/Kconfig -+++ b/drivers/misc/eeprom/Kconfig -@@ -96,4 +96,17 @@ config EEPROM_DIGSY_MTC_CFG - - If unsure, say N. - -+config EEPROM_SUNXI_SID -+ tristate "Allwinner sunxi security ID support" -+ depends on ARCH_SUNXI && SYSFS -+ help -+ This is a driver for the 'security ID' available on various Allwinner -+ devices. -+ -+ Due to the potential risks involved with changing e-fuses, -+ this driver is read-only. -+ -+ This driver can also be built as a module. If so, the module -+ will be called sunxi_sid. -+ - endmenu -diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile -index fc1e81d..9507aec 100644 ---- a/drivers/misc/eeprom/Makefile -+++ b/drivers/misc/eeprom/Makefile -@@ -4,4 +4,5 @@ obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o - obj-$(CONFIG_EEPROM_MAX6875) += max6875.o - obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o - obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o -+obj-$(CONFIG_EEPROM_SUNXI_SID) += sunxi_sid.o - obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o -diff --git a/drivers/misc/eeprom/sunxi_sid.c b/drivers/misc/eeprom/sunxi_sid.c -new file mode 100644 -index 0000000..9c34e57 ---- /dev/null -+++ b/drivers/misc/eeprom/sunxi_sid.c -@@ -0,0 +1,158 @@ -+/* -+ * Copyright (c) 2013 Oliver Schinagl -+ * http://www.linux-sunxi.org -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * This driver exposes the Allwinner security ID, efuses exported in byte- -+ * sized chunks. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define DRV_NAME "sunxi-sid" -+ -+struct sunxi_sid_data { -+ void __iomem *reg_base; -+ unsigned int keysize; -+}; -+ -+/* We read the entire key, due to a 32 bit read alignment requirement. Since we -+ * want to return the requested byte, this results in somewhat slower code and -+ * uses 4 times more reads as needed but keeps code simpler. Since the SID is -+ * only very rarely probed, this is not really an issue. -+ */ -+static u8 sunxi_sid_read_byte(const struct sunxi_sid_data *sid_data, -+ const unsigned int offset) -+{ -+ u32 sid_key; -+ -+ if (offset >= sid_data->keysize) -+ return 0; -+ -+ sid_key = ioread32be(sid_data->reg_base + round_down(offset, 4)); -+ sid_key >>= (offset % 4) * 8; -+ -+ return sid_key; /* Only return the last byte */ -+} -+ -+static ssize_t sid_read(struct file *fd, struct kobject *kobj, -+ struct bin_attribute *attr, char *buf, -+ loff_t pos, size_t size) -+{ -+ struct platform_device *pdev; -+ struct sunxi_sid_data *sid_data; -+ int i; -+ -+ pdev = to_platform_device(kobj_to_dev(kobj)); -+ sid_data = platform_get_drvdata(pdev); -+ -+ if (pos < 0 || pos >= sid_data->keysize) -+ return 0; -+ if (size > sid_data->keysize - pos) -+ size = sid_data->keysize - pos; -+ -+ for (i = 0; i < size; i++) -+ buf[i] = sunxi_sid_read_byte(sid_data, pos + i); -+ -+ return i; -+} -+ -+static struct bin_attribute sid_bin_attr = { -+ .attr = { .name = "eeprom", .mode = S_IRUGO, }, -+ .read = sid_read, -+}; -+ -+static int sunxi_sid_remove(struct platform_device *pdev) -+{ -+ device_remove_bin_file(&pdev->dev, &sid_bin_attr); -+ dev_dbg(&pdev->dev, "driver unloaded\n"); -+ -+ return 0; -+} -+ -+static const struct of_device_id sunxi_sid_of_match[] = { -+ { .compatible = "allwinner,sun4i-sid", .data = (void *)16}, -+ { .compatible = "allwinner,sun7i-a20-sid", .data = (void *)512}, -+ {/* sentinel */}, -+}; -+MODULE_DEVICE_TABLE(of, sunxi_sid_of_match); -+ -+static int sunxi_sid_probe(struct platform_device *pdev) -+{ -+ struct sunxi_sid_data *sid_data; -+ struct resource *res; -+ const struct of_device_id *of_dev_id; -+ u8 *entropy; -+ unsigned int i; -+ -+ sid_data = devm_kzalloc(&pdev->dev, sizeof(struct sunxi_sid_data), -+ GFP_KERNEL); -+ if (!sid_data) -+ return -ENOMEM; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ sid_data->reg_base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(sid_data->reg_base)) -+ return PTR_ERR(sid_data->reg_base); -+ -+ of_dev_id = of_match_device(sunxi_sid_of_match, &pdev->dev); -+ if (!of_dev_id) -+ return -ENODEV; -+ sid_data->keysize = (int)of_dev_id->data; -+ -+ platform_set_drvdata(pdev, sid_data); -+ -+ sid_bin_attr.size = sid_data->keysize; -+ if (device_create_bin_file(&pdev->dev, &sid_bin_attr)) -+ return -ENODEV; -+ -+ entropy = kzalloc(sizeof(u8) * sid_data->keysize, GFP_KERNEL); -+ for (i = 0; i < sid_data->keysize; i++) -+ entropy[i] = sunxi_sid_read_byte(sid_data, i); -+ add_device_randomness(entropy, sid_data->keysize); -+ kfree(entropy); -+ -+ dev_dbg(&pdev->dev, "loaded\n"); -+ -+ return 0; -+} -+ -+static struct platform_driver sunxi_sid_driver = { -+ .probe = sunxi_sid_probe, -+ .remove = sunxi_sid_remove, -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = sunxi_sid_of_match, -+ }, -+}; -+module_platform_driver(sunxi_sid_driver); -+ -+MODULE_AUTHOR("Oliver Schinagl "); -+MODULE_DESCRIPTION("Allwinner sunxi security id driver"); -+MODULE_LICENSE("GPL"); --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/171-add-dt-sunxi-sid.patch b/target/linux/sunxi/patches-3.12/171-add-dt-sunxi-sid.patch deleted file mode 100644 index 55a654f5e1..0000000000 --- a/target/linux/sunxi/patches-3.12/171-add-dt-sunxi-sid.patch +++ /dev/null @@ -1,84 +0,0 @@ -From 3c6625e46113e600fb83468c9a963a10c5cebedc Mon Sep 17 00:00:00 2001 -From: Oliver Schinagl -Date: Tue, 3 Sep 2013 12:33:28 +0200 -Subject: [PATCH] ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and - sun7i - -This patch shall add support for the sunxi-sid driver to the device -tree for A10, A10s, A13 and A20. - -Signed-off-by: Oliver Schinagl ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 5 +++++ - arch/arm/boot/dts/sun5i-a10s.dtsi | 5 +++++ - arch/arm/boot/dts/sun5i-a13.dtsi | 5 +++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 5 +++++ - 4 files changed, 20 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index c32770a..319cc6b 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -266,6 +266,11 @@ - reg = <0x01c20c90 0x10>; - }; - -+ sid: eeprom@01c23800 { -+ compatible = "allwinner,sun4i-sid"; -+ reg = <0x01c23800 0x10>; -+ }; -+ - uart0: serial@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 3b4a057..5247674 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -255,6 +255,11 @@ - reg = <0x01c20c90 0x10>; - }; - -+ sid: eeprom@01c23800 { -+ compatible = "allwinner,sun4i-sid"; -+ reg = <0x01c23800 0x10>; -+ }; -+ - uart0: serial@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index f6091dc..ce8ef2a 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -222,6 +222,11 @@ - reg = <0x01c20c90 0x10>; - }; - -+ sid: eeprom@01c23800 { -+ compatible = "allwinner,sun4i-sid"; -+ reg = <0x01c23800 0x10>; -+ }; -+ - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index b939d30..e46cfed 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -265,6 +265,11 @@ - reg = <0x01c20c90 0x10>; - }; - -+ sid: eeprom@01c23800 { -+ compatible = "allwinner,sun7i-a20-sid"; -+ reg = <0x01c23800 0x200>; -+ }; -+ - uart0: serial@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/175-sunxi-rtc.patch b/target/linux/sunxi/patches-3.12/175-sunxi-rtc.patch deleted file mode 100644 index 615658aeef..0000000000 --- a/target/linux/sunxi/patches-3.12/175-sunxi-rtc.patch +++ /dev/null @@ -1,542 +0,0 @@ -From 9b6e3291426efc69d1e8bf257721997f3eeb3009 Mon Sep 17 00:00:00 2001 -From: Carlo Caione -Date: Wed, 16 Oct 2013 20:30:27 +0200 -Subject: [PATCH] ARM: sun4i/sun7i: RTC driver - -This patch introduces the driver for the RTC in the Allwinner A10 and -A20 SoCs. - -Signed-off-by: Carlo Caione ---- - drivers/rtc/Kconfig | 7 + - drivers/rtc/Makefile | 1 + - drivers/rtc/rtc-sunxi.c | 487 ++++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 495 insertions(+) - create mode 100644 drivers/rtc/rtc-sunxi.c - -diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig -index 9654aa3..ef45e0b 100644 ---- a/drivers/rtc/Kconfig -+++ b/drivers/rtc/Kconfig -@@ -1076,6 +1076,13 @@ config RTC_DRV_SUN4V - If you say Y here you will get support for the Hypervisor - based RTC on SUN4V systems. - -+config RTC_DRV_SUNXI -+ tristate "Allwinner sun4i/sun7i RTC" -+ depends on ARCH_SUNXI -+ help -+ If you say Y here you will get support for the RTC found on -+ Allwinner A10/A20. -+ - config RTC_DRV_STARFIRE - bool "Starfire RTC" - depends on SPARC64 -diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile -index 2dff3d2..8b52b5a 100644 ---- a/drivers/rtc/Makefile -+++ b/drivers/rtc/Makefile -@@ -115,6 +115,7 @@ obj-$(CONFIG_RTC_DRV_STARFIRE) += rtc-starfire.o - obj-$(CONFIG_RTC_DRV_STK17TA8) += rtc-stk17ta8.o - obj-$(CONFIG_RTC_DRV_STMP) += rtc-stmp3xxx.o - obj-$(CONFIG_RTC_DRV_SUN4V) += rtc-sun4v.o -+obj-$(CONFIG_RTC_DRV_SUNXI) += rtc-sunxi.o - obj-$(CONFIG_RTC_DRV_TEGRA) += rtc-tegra.o - obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o - obj-$(CONFIG_RTC_DRV_TILE) += rtc-tile.o -diff --git a/drivers/rtc/rtc-sunxi.c b/drivers/rtc/rtc-sunxi.c -new file mode 100644 -index 0000000..ccd48ae ---- /dev/null -+++ b/drivers/rtc/rtc-sunxi.c -@@ -0,0 +1,487 @@ -+/* -+ * An RTC driver for Allwinner A10/A20 -+ * -+ * Copyright (c) 2013, Carlo Caione -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define SUNXI_LOSC_CTRL 0x0000 -+#define SUNXI_LOSC_CTRL_RTC_HMS_ACC BIT(8) -+#define SUNXI_LOSC_CTRL_RTC_YMD_ACC BIT(7) -+ -+#define SUNXI_RTC_YMD 0x0004 -+ -+#define SUNXI_RTC_HMS 0x0008 -+ -+#define SUNXI_ALRM_DHMS 0x000c -+ -+#define SUNXI_ALRM_EN 0x0014 -+#define SUNXI_ALRM_EN_CNT_EN BIT(8) -+ -+#define SUNXI_ALRM_IRQ_EN 0x0018 -+#define SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN BIT(0) -+ -+#define SUNXI_ALRM_IRQ_STA 0x001c -+#define SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND BIT(0) -+ -+#define SUNXI_LOSC_CTRL_RTC_ACC \ -+ (SUNXI_LOSC_CTRL_RTC_HMS_ACC | SUNXI_LOSC_CTRL_RTC_YMD_ACC) -+ -+#define SUNXI_MASK_DH 0x0000001f -+#define SUNXI_MASK_SM 0x0000003f -+#define SUNXI_MASK_M 0x0000000f -+#define SUNXI_MASK_LY 0x00000001 -+#define SUNXI_MASK_D 0x00000ffe -+#define SUNXI_MASK_M 0x0000000f -+ -+#define SUNXI_GET(x, mask, shift) (((x) & ((mask) << (shift))) \ -+ >> (shift)) -+ -+#define SUNXI_SET(x, mask, shift) (((x) & (mask)) << (shift)) -+ -+/* Get date values */ -+#define SUNXI_DATE_GET_DAY_VALUE(x) SUNXI_GET(x, SUNXI_MASK_DH, 0) -+#define SUNXI_DATE_GET_MON_VALUE(x) SUNXI_GET(x, SUNXI_MASK_M, 8) -+#define SUNXI_DATE_GET_YEAR_VALUE(x, mask) SUNXI_GET(x, mask, 16) -+ -+/* Get time values */ -+#define SUNXI_TIME_GET_SEC_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 0) -+#define SUNXI_TIME_GET_MIN_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 8) -+#define SUNXI_TIME_GET_HOUR_VALUE(x) SUNXI_GET(x, SUNXI_MASK_DH, 16) -+ -+/* Get alarm values */ -+#define SUNXI_ALRM_GET_SEC_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 0) -+#define SUNXI_ALRM_GET_MIN_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 8) -+#define SUNXI_ALRM_GET_HOUR_VALUE(x) SUNXI_GET(x, SUNXI_MASK_DH, 16) -+ -+/* Set date values */ -+#define SUNXI_DATE_SET_DAY_VALUE(x) SUNXI_DATE_GET_DAY_VALUE(x) -+#define SUNXI_DATE_SET_MON_VALUE(x) SUNXI_SET(x, SUNXI_MASK_M, 8) -+#define SUNXI_DATE_SET_YEAR_VALUE(x, mask) SUNXI_SET(x, mask, 16) -+#define SUNXI_LEAP_SET_VALUE(x, shift) SUNXI_SET(x, SUNXI_MASK_LY, shift) -+ -+/* Set time values */ -+#define SUNXI_TIME_SET_SEC_VALUE(x) SUNXI_TIME_GET_SEC_VALUE(x) -+#define SUNXI_TIME_SET_MIN_VALUE(x) SUNXI_SET(x, SUNXI_MASK_SM, 8) -+#define SUNXI_TIME_SET_HOUR_VALUE(x) SUNXI_SET(x, SUNXI_MASK_DH, 16) -+ -+/* set alarm values */ -+#define SUNXI_ALRM_SET_SEC_VALUE(x) SUNXI_ALRM_GET_SEC_VALUE(x) -+#define SUNXI_ALRM_SET_MIN_VALUE(x) SUNXI_SET(x, SUNXI_MASK_SM, 8) -+#define SUNXI_ALRM_SET_HOUR_VALUE(x) SUNXI_SET(x, SUNXI_MASK_DH, 16) -+#define SUNXI_ALRM_SET_DAY_VALUE(x) SUNXI_SET(x, SUNXI_MASK_D, 21) -+ -+/* time unit conversions */ -+#define SEC_IN_MIN 60 -+#define SEC_IN_HOUR (60 * SEC_IN_MIN) -+#define SEC_IN_DAY (24 * SEC_IN_HOUR) -+ -+struct sunxi_rtc_data_year { -+ unsigned int min; /* min year allowed */ -+ unsigned int max; /* max year allowed */ -+ unsigned int off; /* data year offset */ -+ unsigned int mask; -+ unsigned char leap_shift; /* bit shift to get the leap year */ -+}; -+ -+static struct sunxi_rtc_data_year data_year_param[] = { -+ [0] = { -+ .min = 1970, -+ .max = 2100, -+ .off = 0, -+ .mask = 0x000000ff, -+ .leap_shift = 24, -+ }, -+ [1] = { -+ .min = 2010, -+ .max = 2073, -+ .off = 110, -+ .mask = 0x0000003f, -+ .leap_shift = 22, -+ }, -+}; -+ -+struct sunxi_rtc_dev { -+ struct rtc_device *rtc; -+ struct device *dev; -+ struct sunxi_rtc_data_year *data_year; -+ void __iomem *base; -+ int irq; -+}; -+ -+static irqreturn_t sunxi_rtc_alarmirq(int irq, void *id) -+{ -+ struct sunxi_rtc_dev *chip = (struct sunxi_rtc_dev *) id; -+ u32 val; -+ -+ val = readl(chip->base + SUNXI_ALRM_IRQ_STA); -+ -+ if (val & SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND) { -+ val |= SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND; -+ writel(val, chip->base + SUNXI_ALRM_IRQ_STA); -+ -+ rtc_update_irq(chip->rtc, 1, RTC_AF | RTC_IRQF); -+ -+ return IRQ_HANDLED; -+ } -+ -+ return IRQ_NONE; -+} -+ -+static void sunxi_rtc_setaie(int to, struct sunxi_rtc_dev *chip) -+{ -+ u32 alarm_val = 0; -+ u32 alarm_irq_val = 0; -+ -+ if (to) { -+ alarm_val = readl(chip->base + SUNXI_ALRM_EN); -+ alarm_val |= SUNXI_ALRM_EN_CNT_EN; -+ -+ alarm_irq_val = readl(chip->base + SUNXI_ALRM_IRQ_EN); -+ alarm_irq_val |= SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN; -+ } else { -+ writel(SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND, -+ chip->base + SUNXI_ALRM_IRQ_STA); -+ } -+ -+ writel(alarm_val, chip->base + SUNXI_ALRM_EN); -+ writel(alarm_irq_val, chip->base + SUNXI_ALRM_IRQ_EN); -+} -+ -+static int sunxi_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev); -+ struct rtc_time *alrm_tm = &alrm->time; -+ u32 alarm; -+ u32 alarm_en; -+ u32 date; -+ -+ alarm = readl(chip->base + SUNXI_ALRM_DHMS); -+ date = readl(chip->base + SUNXI_RTC_YMD); -+ -+ alrm_tm->tm_sec = SUNXI_ALRM_GET_SEC_VALUE(alarm); -+ alrm_tm->tm_min = SUNXI_ALRM_GET_MIN_VALUE(alarm); -+ alrm_tm->tm_hour = SUNXI_ALRM_GET_HOUR_VALUE(alarm); -+ -+ alrm_tm->tm_mday = SUNXI_DATE_GET_DAY_VALUE(date); -+ alrm_tm->tm_mon = SUNXI_DATE_GET_MON_VALUE(date); -+ alrm_tm->tm_year = SUNXI_DATE_GET_YEAR_VALUE(date, -+ chip->data_year->mask); -+ -+ alrm_tm->tm_year += chip->data_year->off; -+ alrm_tm->tm_mon -= 1; -+ -+ alarm_en = readl(chip->base + SUNXI_ALRM_IRQ_EN); -+ if (alarm_en & SUNXI_ALRM_EN_CNT_EN) -+ alrm->enabled = 1; -+ -+ return 0; -+} -+ -+static int sunxi_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) -+{ -+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev); -+ u32 date, time; -+ int t; -+ -+ /* read again if the system was mid-updated -+ */ -+ for (t = 0; t < 2; t++) { -+ date = readl(chip->base + SUNXI_RTC_YMD); -+ time = readl(chip->base + SUNXI_RTC_HMS); -+ -+ rtc_tm->tm_sec = SUNXI_TIME_GET_SEC_VALUE(time); -+ rtc_tm->tm_min = SUNXI_TIME_GET_MIN_VALUE(time); -+ rtc_tm->tm_hour = SUNXI_TIME_GET_HOUR_VALUE(time); -+ -+ rtc_tm->tm_mday = SUNXI_DATE_GET_DAY_VALUE(date); -+ rtc_tm->tm_mon = SUNXI_DATE_GET_MON_VALUE(date); -+ rtc_tm->tm_year = SUNXI_DATE_GET_YEAR_VALUE(date, -+ chip->data_year->mask); -+ -+ if (rtc_tm->tm_sec == 0) -+ msleep(500); -+ else -+ break; -+ } -+ -+ rtc_tm->tm_year += chip->data_year->off; -+ rtc_tm->tm_mon -= 1; -+ -+ return rtc_valid_tm(rtc_tm); -+} -+ -+static int sunxi_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) -+{ -+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev); -+ struct rtc_time *alrm_tm = &alrm->time; -+ struct rtc_time tm_now; -+ u32 alarm = 0; -+ unsigned long time_now = 0; -+ unsigned long time_set = 0; -+ unsigned long time_gap = 0; -+ unsigned long time_gap_day = 0; -+ unsigned long time_gap_hour = 0; -+ unsigned long time_gap_min = 0; -+ int ret = 0; -+ -+ ret = sunxi_rtc_gettime(dev, &tm_now); -+ if (ret < 0) { -+ dev_err(dev, "Error in getting time\n"); -+ return -EINVAL; -+ } -+ -+ rtc_tm_to_time(alrm_tm, &time_set); -+ rtc_tm_to_time(&tm_now, &time_now); -+ if (time_set <= time_now) { -+ dev_err(dev, "Date to set in the past\n"); -+ return -EINVAL; -+ } -+ -+ time_gap = time_set - time_now; -+ time_gap_day = time_gap / SEC_IN_DAY; -+ time_gap -= time_gap_day * SEC_IN_DAY; -+ time_gap_hour = time_gap / SEC_IN_HOUR; -+ time_gap -= time_gap_hour * SEC_IN_HOUR; -+ time_gap_min = time_gap / SEC_IN_MIN; -+ time_gap -= time_gap_min * SEC_IN_MIN; -+ -+ if (time_gap_day > 255) { -+ dev_err(dev, "Day must be in the range 0 - 255\n"); -+ return -EINVAL; -+ } -+ -+ sunxi_rtc_setaie(0, chip); -+ writel(0, chip->base + SUNXI_ALRM_DHMS); -+ usleep_range(100, 300); -+ -+ alarm = SUNXI_ALRM_SET_SEC_VALUE(time_gap) | -+ SUNXI_ALRM_SET_MIN_VALUE(time_gap_min) | -+ SUNXI_ALRM_SET_HOUR_VALUE(time_gap_hour) | -+ SUNXI_ALRM_SET_DAY_VALUE(time_gap_day); -+ writel(alarm, chip->base + SUNXI_ALRM_DHMS); -+ -+ writel(0, chip->base + SUNXI_ALRM_IRQ_EN); -+ writel(SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN, chip->base + SUNXI_ALRM_IRQ_EN); -+ -+ sunxi_rtc_setaie(alrm->enabled, chip); -+ -+ return 0; -+} -+ -+static int sunxi_rtc_settime(struct device *dev, struct rtc_time *rtc_tm) -+{ -+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev); -+ u32 date = 0; -+ u32 time = 0; -+ int year; -+ int t; -+ -+ year = rtc_tm->tm_year + 1900; -+ if (year < chip->data_year->min || year > chip->data_year->max) { -+ dev_err(dev, "rtc only supports year in range %d - %d\n", -+ chip->data_year->min, chip->data_year->max); -+ return -EINVAL; -+ } -+ -+ rtc_tm->tm_year -= chip->data_year->off; -+ rtc_tm->tm_mon += 1; -+ -+ date = SUNXI_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) | -+ SUNXI_DATE_SET_MON_VALUE(rtc_tm->tm_mon) | -+ SUNXI_DATE_SET_YEAR_VALUE(rtc_tm->tm_year, -+ chip->data_year->mask); -+ -+ if (is_leap_year(year)) -+ date |= SUNXI_LEAP_SET_VALUE(1, chip->data_year->leap_shift); -+ -+ time = SUNXI_TIME_SET_SEC_VALUE(rtc_tm->tm_sec) | -+ SUNXI_TIME_SET_MIN_VALUE(rtc_tm->tm_min) | -+ SUNXI_TIME_SET_HOUR_VALUE(rtc_tm->tm_hour); -+ -+ writel(0, chip->base + SUNXI_RTC_HMS); -+ writel(0, chip->base + SUNXI_RTC_YMD); -+ -+ writel(time, chip->base + SUNXI_RTC_HMS); -+ -+ /* After writing the RCT HH-MM-SS register, the -+ * SUNXI_LOSC_CTRL_RTC_HMS_ACC bit is set and it will be cleared until -+ * the real writing operation is finished -+ */ -+ for (t = 0; t < 3; t++) { -+ if ((readl(chip->base + SUNXI_LOSC_CTRL) & -+ SUNXI_LOSC_CTRL_RTC_HMS_ACC) && --t) -+ break; -+ else -+ msleep(50); -+ } -+ if (t == 0) { -+ dev_err(dev, "Failed to set rtc time.\n"); -+ return -1; -+ } -+ -+ writel(date, chip->base + SUNXI_RTC_YMD); -+ -+ /* After writing the RCT YY-MM-DD register, the -+ * SUNXI_LOSC_CTRL_RTC_YMD_ACC bit is set and it will be cleared until -+ * the real writing operation is finished -+ */ -+ for (t = 0; t < 3; t++) { -+ if ((readl(chip->base + SUNXI_LOSC_CTRL) & -+ SUNXI_LOSC_CTRL_RTC_YMD_ACC) && --t) -+ break; -+ else -+ msleep(50); -+ } -+ if (t == 0) { -+ dev_err(dev, "Failed to set rtc date.\n"); -+ return -1; -+ } -+ -+ /* wait about 70us to make sure the the time is really written into -+ * target */ -+ usleep_range(70, 100); -+ -+ return 0; -+} -+ -+static int sunxi_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) -+{ -+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev); -+ -+ if (!enabled) -+ sunxi_rtc_setaie(enabled, chip); -+ -+ return 0; -+} -+ -+static const struct rtc_class_ops sunxi_rtc_ops = { -+ .read_time = sunxi_rtc_gettime, -+ .set_time = sunxi_rtc_settime, -+ .read_alarm = sunxi_rtc_getalarm, -+ .set_alarm = sunxi_rtc_setalarm, -+ .alarm_irq_enable = sunxi_rtc_alarm_irq_enable -+}; -+ -+static const struct of_device_id sunxi_rtc_dt_ids[] = { -+ { .compatible = "allwinner,sun4i-rtc", .data = &data_year_param[0] }, -+ { .compatible = "allwinner,sun7i-a20-rtc", .data = &data_year_param[1] }, -+ { /* sentinel */ }, -+}; -+MODULE_DEVICE_TABLE(of, sunxi_rtc_dt_ids); -+ -+ -+static int sunxi_rtc_probe(struct platform_device *pdev) -+{ -+ struct sunxi_rtc_dev *chip; -+ struct resource *res; -+ const struct of_device_id *of_id; -+ int ret; -+ -+ chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); -+ if (!chip) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, chip); -+ chip->dev = &pdev->dev; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ chip->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(chip->base)) -+ return PTR_ERR(chip->base); -+ -+ chip->irq = platform_get_irq(pdev, 0); -+ if (chip->irq < 0) { -+ dev_err(&pdev->dev, "No IRQ resource\n"); -+ return chip->irq; -+ } -+ ret = devm_request_irq(&pdev->dev, chip->irq, sunxi_rtc_alarmirq, -+ 0, dev_name(&pdev->dev), chip); -+ if (ret) { -+ dev_err(&pdev->dev, "Could not request IRQ\n"); -+ return ret; -+ } -+ -+ of_id = of_match_device(sunxi_rtc_dt_ids, &pdev->dev); -+ if (!of_id) { -+ dev_err(&pdev->dev, "Unable to setup RTC data\n"); -+ return -ENODEV; -+ } -+ chip->data_year = (struct sunxi_rtc_data_year *) of_id->data; -+ -+ /* clear the alarm count value */ -+ writel(0, chip->base + SUNXI_ALRM_DHMS); -+ -+ /* disable alarm, not generate irq pending */ -+ writel(0, chip->base + SUNXI_ALRM_EN); -+ -+ /* disable alarm week/cnt irq, unset to cpu */ -+ writel(0, chip->base + SUNXI_ALRM_IRQ_EN); -+ -+ /* clear alarm week/cnt irq pending */ -+ writel(SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND, chip->base + SUNXI_ALRM_IRQ_STA); -+ -+ chip->rtc = rtc_device_register("rtc-sunxi", &pdev->dev, -+ &sunxi_rtc_ops, THIS_MODULE); -+ if (IS_ERR(chip->rtc)) { -+ dev_err(&pdev->dev, "unable to register device\n"); -+ return PTR_ERR(chip->rtc); -+ } -+ -+ dev_info(&pdev->dev, "RTC enabled\n"); -+ -+ return 0; -+} -+ -+static int sunxi_rtc_remove(struct platform_device *pdev) -+{ -+ struct sunxi_rtc_dev *chip = platform_get_drvdata(pdev); -+ -+ rtc_device_unregister(chip->rtc); -+ -+ return 0; -+} -+ -+static struct platform_driver sunxi_rtc_driver = { -+ .probe = sunxi_rtc_probe, -+ .remove = sunxi_rtc_remove, -+ .driver = { -+ .name = "sunxi-rtc", -+ .owner = THIS_MODULE, -+ .of_match_table = sunxi_rtc_dt_ids, -+ }, -+}; -+ -+module_platform_driver(sunxi_rtc_driver); -+ -+MODULE_DESCRIPTION("sunxi RTC driver"); -+MODULE_AUTHOR("Carlo Caione "); -+MODULE_LICENSE("GPL"); --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/176-add-dt-rtc-for-sun4i-7i.patch b/target/linux/sunxi/patches-3.12/176-add-dt-rtc-for-sun4i-7i.patch deleted file mode 100644 index 3c23c742eb..0000000000 --- a/target/linux/sunxi/patches-3.12/176-add-dt-rtc-for-sun4i-7i.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 40a111b1ce47fabcff14a3bff131a4d118ada257 Mon Sep 17 00:00:00 2001 -From: Carlo Caione -Date: Wed, 16 Oct 2013 20:30:26 +0200 -Subject: [PATCH] ARM: dts: sun4i/sun7i: add RTC node - -Add the RTC node to DTS for Allwinner A10 and Allwinner A20. - -Signed-off-by: Carlo Caione ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 6 ++++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 6 ++++++ - 2 files changed, 12 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 084fef9..04819a7 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -393,6 +393,12 @@ - reg = <0x01c20c90 0x10>; - }; - -+ rtc: rtc@01c20d00 { -+ compatible = "allwinner,sun4i-rtc"; -+ reg = <0x01c20d00 0x20>; -+ interrupts = <24>; -+ }; -+ - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-sid"; - reg = <0x01c23800 0x10>; -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index fe6cf18..b92e17b 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -381,6 +381,12 @@ - reg = <0x01c20c90 0x10>; - }; - -+ rtc: rtc@01c20d00 { -+ compatible = "allwinner,sun7i-a20-rtc"; -+ reg = <0x01c20d00 0x20>; -+ interrupts = <0 24 1>; -+ }; -+ - sid: eeprom@01c23800 { - compatible = "allwinner,sun7i-a20-sid"; - reg = <0x01c23800 0x200>; --- -1.8.4 - diff --git a/target/linux/sunxi/patches-3.12/180-dt-sun7i-add-mmc.patch b/target/linux/sunxi/patches-3.12/180-dt-sun7i-add-mmc.patch deleted file mode 100644 index ee7e2f189f..0000000000 --- a/target/linux/sunxi/patches-3.12/180-dt-sun7i-add-mmc.patch +++ /dev/null @@ -1,142 +0,0 @@ -From 665414c8e7584be7f1a30f77cf3eae177e93fd3e Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sat, 14 Dec 2013 22:46:20 +0100 -Subject: [PATCH] ARM: dts: sun7i: Add support for mmc - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 16 ++++++++++++ - arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 16 ++++++++++++ - arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 32 +++++++++++++++++++++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 34 +++++++++++++++++++++++++ - 4 files changed, 98 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -index 5c51cb8..6aef299 100644 ---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -@@ -34,7 +34,23 @@ - }; - }; - -+ sdc0: sdc@01c0f000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_cubieboard2>; -+ cd-gpios = <&pio 7 1 0>; /* PH1 */ -+ cd-mode = <1>; -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { -+ mmc0_cd_pin_cubieboard2: mmc0_cd_pin@0 { -+ allwinner,pins = "PH1"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - led_pins_cubieboard2: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; -diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -index 8a1009d..302c785 100644 -diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -index ead3013..f271db9 100644 ---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -@@ -34,7 +34,39 @@ - }; - }; - -+ sdc0: sdc@01c0f000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_olinuxinom>; -+ cd-gpios = <&pio 7 1 0>; /* PH1 */ -+ cd-mode = <1>; -+ status = "okay"; -+ }; -+ -+ sdc3: sdc@01c12000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdc3_pins_a>; -+ pinctrl-1 = <&mmc3_cd_pin_olinuxinom>; -+ cd-gpios = <&pio 7 11 0>; /* PH11 */ -+ cd-mode = <1>; -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { -+ mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { -+ allwinner,pins = "PH1"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { -+ allwinner,pins = "PH11"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 63757c5..5f9440c 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -303,6 +303,26 @@ - #size-cells = <0>; - }; - -+ sdc0: sdc@01c0f000 { -+ compatible = "allwinner,sun5i-mmc"; -+ reg = <0x01c0f000 0x1000>; -+ clocks = <&ahb_gates 8>, <&mmc0>; -+ clock-names = "ahb", "mod"; -+ interrupts = <0 32 4>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ -+ sdc3: sdc@01c12000 { -+ compatible = "allwinner,sun5i-mmc"; -+ reg = <0x01c12000 0x1000>; -+ clocks = <&ahb_gates 11>, <&mmc3>; -+ clock-names = "ahb", "mod"; -+ interrupts = <0 35 4>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ - pio: pinctrl@01c20800 { - compatible = "allwinner,sun7i-a20-pinctrl"; - reg = <0x01c20800 0x400>; -@@ -366,6 +386,20 @@ - allwinner,drive = <0>; - allwinner,pull = <0>; - }; -+ -+ sdc0_pins_a: sdc0@0 { -+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; -+ allwinner,function = "mmc0"; -+ allwinner,drive = <3>; -+ allwinner,pull = <1>; -+ }; -+ -+ sdc3_pins_a: sdc3@0 { -+ allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; -+ allwinner,function = "mmc3"; -+ allwinner,drive = <3>; -+ allwinner,pull = <1>; -+ }; - }; - - timer@01c20c00 { --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/181-dt-sun4i-add-mmc.patch b/target/linux/sunxi/patches-3.12/181-dt-sun4i-add-mmc.patch deleted file mode 100644 index cbf40aedc6..0000000000 --- a/target/linux/sunxi/patches-3.12/181-dt-sun4i-add-mmc.patch +++ /dev/null @@ -1,76 +0,0 @@ -From 82cfcf4cf1329420180ef06b7aaec67928396112 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sat, 14 Dec 2013 22:45:39 +0100 -Subject: [PATCH] ARM: dts: sun4i: Add support for mmc - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 16 ++++++++++++++++ - arch/arm/boot/dts/sun4i-a10.dtsi | 16 ++++++++++++++++ - 2 files changed, 32 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -index 425a7db..d193937 100644 ---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -@@ -42,7 +42,23 @@ - status = "okay"; - }; - -+ sdc0: sdc@01c0f000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_cubieboard>; -+ cd-gpios = <&pio 7 1 0>; /* PH1 */ -+ cd-mode = <1>; -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { -+ mmc0_cd_pin_cubieboard: mmc0_cd_pin@0 { -+ allwinner,pins = "PH1"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - led_pins_cubieboard: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 4dccdb0..13bccd5 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -306,6 +306,15 @@ - #size-cells = <0>; - }; - -+ sdc0: sdc@01c0f000 { -+ compatible = "allwinner,sun4i-mmc"; -+ reg = <0x01c0f000 0x1000>; -+ clocks = <&ahb_gates 8>, <&mmc0>; -+ interrupts = <32>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-ic"; - reg = <0x01c20400 0x400>; -@@ -376,6 +385,13 @@ - allwinner,drive = <0>; - allwinner,pull = <0>; - }; -+ -+ sdc0_pins_a: sdc0@0 { -+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; -+ allwinner,function = "mmc0"; -+ allwinner,drive = <3>; -+ allwinner,pull = <1>; -+ }; - }; - - timer@01c20c00 { --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/182-dt-sun5i-add-mmc.patch b/target/linux/sunxi/patches-3.12/182-dt-sun5i-add-mmc.patch deleted file mode 100644 index 866382595d..0000000000 --- a/target/linux/sunxi/patches-3.12/182-dt-sun5i-add-mmc.patch +++ /dev/null @@ -1,204 +0,0 @@ -From 36e4afca857c8b57bd661135d173bdf65b348f78 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sat, 14 Dec 2013 16:20:55 +0100 -Subject: [PATCH] ARM: dts: sun5i: Add mmc support - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 32 ++++++++++++++++++++++ - arch/arm/boot/dts/sun5i-a10s.dtsi | 34 ++++++++++++++++++++++++ - arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 16 +++++++++++ - arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 16 +++++++++++ - arch/arm/boot/dts/sun5i-a13.dtsi | 17 ++++++++++++ - 5 files changed, 115 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts -index 3c9f8b3..e53fb12 100644 ---- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts -@@ -34,7 +34,39 @@ - }; - }; - -+ sdc0: sdc@01c0f000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_olinuxino_micro>; -+ cd-gpios = <&pio 6 1 0>; /* PG1 */ -+ cd-mode = <1>; -+ status = "okay"; -+ }; -+ -+ sdc1: sdc@01c10000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdc1_pins_a>; -+ pinctrl-1 = <&mmc1_cd_pin_olinuxino_micro>; -+ cd-gpios = <&pio 6 13 0>; /* PG13 */ -+ cd-mode = <1>; -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { -+ mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { -+ allwinner,pins = "PG1"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { -+ allwinner,pins = "PG13"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PE3"; - allwinner,function = "gpio_out"; -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 83e183c..fdbc290 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -274,6 +274,26 @@ - #size-cells = <0>; - }; - -+ sdc0: sdc@01c0f000 { -+ compatible = "allwinner,sun5i-mmc"; -+ reg = <0x01c0f000 0x1000>; -+ clocks = <&ahb_gates 8>, <&mmc0>; -+ clock-names = "ahb", "mod"; -+ interrupts = <32>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ -+ sdc1: sdc@01c10000 { -+ compatible = "allwinner,sun5i-mmc"; -+ reg = <0x01c10000 0x1000>; -+ clocks = <&ahb_gates 9>, <&mmc1>; -+ clock-names = "ahb", "mod"; -+ interrupts = <33>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-ic"; - reg = <0x01c20400 0x400>; -@@ -344,6 +364,20 @@ - allwinner,drive = <0>; - allwinner,pull = <0>; - }; -+ -+ sdc0_pins_a: sdc0@0 { -+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; -+ allwinner,function = "mmc0"; -+ allwinner,drive = <3>; -+ allwinner,pull = <1>; -+ }; -+ -+ sdc1_pins_a: sdc1@0 { -+ allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8"; -+ allwinner,function = "mmc1"; -+ allwinner,drive = <3>; -+ allwinner,pull = <1>; -+ }; - }; - - timer@01c20c00 { -diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts -index fe2ce0a..fbd4e7d 100644 ---- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts -@@ -20,7 +20,23 @@ - compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13"; - - soc@01c00000 { -+ sdc0: sdc@01c0f000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_olinuxinom>; -+ cd-gpios = <&pio 6 0 0>; /* PG0 */ -+ cd-mode = <1>; -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { -+ mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { -+ allwinner,pins = "PG0"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - led_pins_olinuxinom: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; -diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -index 9e508dc..ce22c81 100644 ---- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -@@ -23,7 +23,23 @@ - }; - - soc@01c00000 { -+ sdc0: sdc@01c0f000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_olinuxino>; -+ cd-gpios = <&pio 6 0 0>; /* PG0 */ -+ cd-mode = <1>; -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { -+ mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { -+ allwinner,pins = "PG0"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index 0bb4300..0ca0819 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -255,6 +255,16 @@ - #size-cells = <1>; - ranges; - -+ sdc0: sdc@01c0f000 { -+ compatible = "allwinner,sun5i-mmc"; -+ reg = <0x01c0f000 0x1000>; -+ clocks = <&ahb_gates 8>, <&mmc0>; -+ clock-names = "ahb", "mod"; -+ interrupts = <32>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-ic"; - reg = <0x01c20400 0x400>; -@@ -307,6 +317,13 @@ - allwinner,drive = <0>; - allwinner,pull = <0>; - }; -+ -+ sdc0_pins_a: sdc0@0 { -+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; -+ allwinner,function = "mmc0"; -+ allwinner,drive = <3>; -+ allwinner,pull = <1>; -+ }; - }; - - timer@01c20c00 { --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/183-sunxi-mmc-add-Kconfig.patch b/target/linux/sunxi/patches-3.12/183-sunxi-mmc-add-Kconfig.patch deleted file mode 100644 index c3cb13d43d..0000000000 --- a/target/linux/sunxi/patches-3.12/183-sunxi-mmc-add-Kconfig.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 447675f817b95881e9922f002de3fc7f6d6e9207 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?David=20Lanzend=C3=B6rfer?= -Date: Fri, 6 Sep 2013 22:34:33 +0200 -Subject: [PATCH] ARM: sunxi-mci: Add driver for SD/MMC hosts found within - Allwinner A1X SoCs - -Signed-off-by: Hans de Goede ---- - drivers/mmc/host/Kconfig | 8 + - drivers/mmc/host/Makefile | 2 + - drivers/mmc/host/sunxi-mci.c | 1056 ++++++++++++++++++++++++++++++++++++++++++ - drivers/mmc/host/sunxi-mci.h | 334 +++++++++++++ - 4 files changed, 1400 insertions(+) - create mode 100644 drivers/mmc/host/sunxi-mci.c - create mode 100644 drivers/mmc/host/sunxi-mci.h - -diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig -index 7fc5099..0df0322 100644 ---- a/drivers/mmc/host/Kconfig -+++ b/drivers/mmc/host/Kconfig -@@ -665,3 +665,11 @@ config MMC_REALTEK_PCI - help - Say Y here to include driver code to support SD/MMC card interface - of Realtek PCI-E card reader -+ -+config MMC_SUNXI -+ tristate "Allwinner A1X SD/MMC Host Controller support" -+ depends on ARCH_SUNXI -+ default y -+ help -+ This selects support for the SD/MMC Host Controller on -+ Allwinner A1X based SoCs. -diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile -index c41d0c3..f76f783 100644 ---- a/drivers/mmc/host/Makefile -+++ b/drivers/mmc/host/Makefile -@@ -52,6 +52,8 @@ obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o - - obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o - -+obj-$(CONFIG_MMC_SUNXI) += sunxi-mci.o -+ - obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o - obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o - obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o -diff --git a/drivers/mmc/host/sunxi-mci.c b/drivers/mmc/host/sunxi-mci.c -new file mode 100644 -index 0000000..cbde1d3 -diff --git a/drivers/mmc/host/sunxi-mci.h b/drivers/mmc/host/sunxi-mci.h -new file mode 100644 -index 0000000..0f5f95c -\ No newline at end of file --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/184-sunxi-mci-use-phasectrl-from-sunxiclk.patch b/target/linux/sunxi/patches-3.12/184-sunxi-mci-use-phasectrl-from-sunxiclk.patch deleted file mode 100644 index 875ddea80a..0000000000 --- a/target/linux/sunxi/patches-3.12/184-sunxi-mci-use-phasectrl-from-sunxiclk.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 518dfd76baef66d0ef4c256fc0f72ea06d6be8cc Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sun, 15 Dec 2013 19:44:01 +0100 -Subject: [PATCH] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control - -Signed-off-by: Hans de Goede ---- - include/linux/clk/sunxi.h | 22 ++++++++++++++++++++++ - 1 file changed, 22 insertions(+) - create mode 100644 include/linux/clk/sunxi.h - -diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h -new file mode 100644 -index 0000000..1ef5c89 ---- /dev/null -+++ b/include/linux/clk/sunxi.h -@@ -0,0 +1,22 @@ -+/* -+ * Copyright 2013 - Hans de Goede -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef __LINUX_CLK_SUNXI_H_ -+#define __LINUX_CLK_SUNXI_H_ -+ -+#include -+ -+void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output); -+ -+#endif --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/185-clk-sunxi-mmc-phasectrl.patch b/target/linux/sunxi/patches-3.12/185-clk-sunxi-mmc-phasectrl.patch deleted file mode 100644 index f75394b9bd..0000000000 --- a/target/linux/sunxi/patches-3.12/185-clk-sunxi-mmc-phasectrl.patch +++ /dev/null @@ -1,62 +0,0 @@ -From e074907f73e0bc70740901fb4a05fdf5fc81b3ff Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Fri, 20 Sep 2013 20:29:17 -0300 -Subject: [PATCH] clk: sunxi: Implement MMC phase control -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Emilio López ---- - drivers/clk/sunxi/clk-sunxi.c | 35 +++++++++++++++++++++++++++++++++++ - 1 file changed, 35 insertions(+) - -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 360d705..d2b8d3c 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -352,6 +352,41 @@ static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate, - - - /** -+ * clk_sunxi_mmc_phase_control() - configures MMC clock phase control -+ */ -+ -+void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output) -+{ -+ #define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw) -+ #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) -+ -+ struct clk_composite *composite = to_clk_composite(hw); -+ struct clk_hw *rate_hw = composite->rate_hw; -+ struct clk_factors *factors = to_clk_factors(rate_hw); -+ unsigned long flags = 0; -+ u32 reg; -+ -+ if (factors->lock) -+ spin_lock_irqsave(factors->lock, flags); -+ -+ reg = readl(factors->reg); -+ -+ /* set sample clock phase control */ -+ reg &= ~(0x7 << 20); -+ reg |= ((sample & 0x7) << 20); -+ -+ /* set output clock phase control */ -+ reg &= ~(0x7 << 8); -+ reg |= ((output & 0x7) << 8); -+ -+ writel(reg, factors->reg); -+ -+ if (factors->lock) -+ spin_unlock_irqrestore(factors->lock, flags); -+} -+ -+ -+/** - * sunxi_factors_clk_setup() - Setup function for factor clocks - */ - --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/186-dt-sun4i-fixup-sdc0.patch b/target/linux/sunxi/patches-3.12/186-dt-sun4i-fixup-sdc0.patch deleted file mode 100644 index f3aa3c3d7d..0000000000 --- a/target/linux/sunxi/patches-3.12/186-dt-sun4i-fixup-sdc0.patch +++ /dev/null @@ -1,11 +0,0 @@ -diff -ruN old/arch/arm/boot/dts/sun4i-a10.dtsi new/arch/arm/boot/dts/sun4i-a10.dtsi ---- old/arch/arm/boot/dts/sun4i-a10.dtsi 2014-01-04 01:59:34.000000000 +0100 -+++ new/arch/arm/boot/dts/sun4i-a10.dtsi 2014-01-04 01:54:00.000000000 +0100 -@@ -323,6 +323,7 @@ - compatible = "allwinner,sun4i-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, <&mmc0>; -+ clock-names = "ahb", "mod"; - interrupts = <32>; - bus-width = <4>; - status = "disabled"; diff --git a/target/linux/sunxi/patches-3.12/190-ahci-missing-dma-for-sunxi.patch b/target/linux/sunxi/patches-3.12/190-ahci-missing-dma-for-sunxi.patch deleted file mode 100644 index c7a529967b..0000000000 --- a/target/linux/sunxi/patches-3.12/190-ahci-missing-dma-for-sunxi.patch +++ /dev/null @@ -1,60 +0,0 @@ -From a4c21089299ba411d998b16423a76cbae111194e Mon Sep 17 00:00:00 2001 -From: Oliver Schinagl -Date: Mon, 2 Dec 2013 16:13:32 +0100 -Subject: [PATCH] RFC: AHCI: libahci is missing DMA - -The Allwinner sunxi platforms have patched in the following to enable -DMA. This patch enables DMA controllers for the SUNXI Architecture. - -Signed-off-by: Olliver Schinagl ---- - drivers/ata/ahci.h | 6 ++++++ - drivers/ata/libahci.c | 8 ++++++++ - 2 files changed, 14 insertions(+) - -diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h -index 2289efd..2bf2423 100644 ---- a/drivers/ata/ahci.h -+++ b/drivers/ata/ahci.h -@@ -138,6 +138,7 @@ enum { - PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */ - PORT_FBS = 0x40, /* FIS-based Switching */ - PORT_DEVSLP = 0x44, /* device sleep */ -+ PORT_DMA = 0x70, /* direct memory access */ - - /* PORT_IRQ_{STAT,MASK} bits */ - PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ -@@ -209,6 +210,11 @@ enum { - PORT_DEVSLP_DSP = (1 << 1), /* DevSlp present */ - PORT_DEVSLP_ADSE = (1 << 0), /* Aggressive DevSlp enable */ - -+ /* PORT_DMA bits */ -+ PORT_DMA_SETUP_OFFSET = 8, /* dma setup offset */ -+ PORT_DMA_SETUP_MASK = (0xff << PORT_DMA_SETUP_OFFSET),/* dma mask */ -+ PORT_DMA_SETUP_INIT = (0x44 << 0), -+ - /* hpriv->flags bits */ - - #define AHCI_HFLAGS(flags) .private_data = (void *)(flags) -diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c -index c482f8c..d697a74 100644 ---- a/drivers/ata/libahci.c -+++ b/drivers/ata/libahci.c -@@ -570,6 +570,14 @@ void ahci_start_engine(struct ata_port *ap) - void __iomem *port_mmio = ahci_port_base(ap); - u32 tmp; - -+#ifdef CONFIG_ARCH_SUNXI -+ /* Setup DMA before DMA start */ -+ tmp = readl(port_mmio + PORT_DMA); -+ tmp &= ~PORT_DMA_SETUP_MASK; -+ tmp |= PORT_DMA_SETUP_INIT << PORT_DMA_SETUP_OFFSET; -+ writel(tmp, port_mmio + PORT_DMA); -+#endif -+ - /* start DMA */ - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_START; --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/191-add-sunxi-ahci.patch b/target/linux/sunxi/patches-3.12/191-add-sunxi-ahci.patch deleted file mode 100644 index 9034be3101..0000000000 --- a/target/linux/sunxi/patches-3.12/191-add-sunxi-ahci.patch +++ /dev/null @@ -1,436 +0,0 @@ -From b7f492ca20e480ea3402692e165f919f20145935 Mon Sep 17 00:00:00 2001 -From: Oliver Schinagl -Date: Tue, 3 Dec 2013 12:07:01 +0100 -Subject: [PATCH] ARM: sunxi: Add an ahci-platform compatible AHCI driver for - the Allwinner SUNXi series of SoCs - -This patch adds support for the sunxi series of SoC's by allwinner. It -plugs into the ahci-platform framework. - -Note: Currently it uses a somewhat hackish approach that probably needs -a lot more work, but does the same as the IMX SoC's. - -Signed-off-by: Olliver Schinagl ---- - .../devicetree/bindings/ata/ahci-sunxi.txt | 24 ++ - drivers/ata/Kconfig | 9 + - drivers/ata/Makefile | 1 + - drivers/ata/ahci_platform.c | 12 + - drivers/ata/ahci_sunxi.c | 305 +++++++++++++++++++++ - 5 files changed, 351 insertions(+) - create mode 100644 Documentation/devicetree/bindings/ata/ahci-sunxi.txt - create mode 100644 drivers/ata/ahci_sunxi.c - -diff --git a/Documentation/devicetree/bindings/ata/ahci-sunxi.txt b/Documentation/devicetree/bindings/ata/ahci-sunxi.txt -new file mode 100644 -index 0000000..0792fa5 ---- /dev/null -+++ b/Documentation/devicetree/bindings/ata/ahci-sunxi.txt -@@ -0,0 +1,24 @@ -+Allwinner SUNXI AHCI SATA Controller -+ -+SATA nodes are defined to describe on-chip Serial ATA controllers. -+Each SATA controller should have its own node. -+ -+Required properties: -+- compatible : compatible list, contains "allwinner,sun4i-a10-ahci" -+- reg : -+- interrupts : -+- clocks : clocks for ACHI -+- clock-names : clock names for AHCI -+ -+Optional properties: -+- pwr-supply : regulator to control the power supply GPIO -+ -+Example: -+ ahci@01c18000 { -+ compatible = "allwinner,sun4i-a10-ahci"; -+ reg = <0x01c18000 0x1000>; -+ interrupts = <0 56 1>; -+ clocks = <&ahb_gates 25>, <&pll6 0>; -+ clock-names = "ahb_sata", "pll6_sata"; -+ pwr-supply = <®_ahci_5v>; -+ }; -diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig -index 4e73772..b87e2ba 100644 ---- a/drivers/ata/Kconfig -+++ b/drivers/ata/Kconfig -@@ -106,6 +106,15 @@ config AHCI_IMX - - If unsure, say N. - -+config AHCI_SUNXI -+ tristate "Allwinner sunxi AHCI SATA support" -+ depends on SATA_AHCI_PLATFORM && ARCH_SUNXI -+ help -+ This option enables support for the Allwinner sunxi SoC's -+ onboard AHCI SATA. -+ -+ If unsure, say N. -+ - config SATA_FSL - tristate "Freescale 3.0Gbps SATA support" - depends on FSL_SOC -diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile -index 46518c6..246050b 100644 ---- a/drivers/ata/Makefile -+++ b/drivers/ata/Makefile -@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o - obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o - obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o - obj-$(CONFIG_AHCI_IMX) += ahci_imx.o -+obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o - - # SFF w/ custom DMA - obj-$(CONFIG_PDC_ADMA) += pdc_adma.o -diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c -index 4b231ba..1046b44 100644 ---- a/drivers/ata/ahci_platform.c -+++ b/drivers/ata/ahci_platform.c -@@ -31,6 +31,7 @@ enum ahci_type { - AHCI, /* standard platform ahci */ - IMX53_AHCI, /* ahci on i.mx53 */ - STRICT_AHCI, /* delayed DMA engine start */ -+ SUNXI_AHCI, /* ahci on sunxi */ - }; - - static struct platform_device_id ahci_devtype[] = { -@@ -44,6 +45,9 @@ enum ahci_type { - .name = "strict-ahci", - .driver_data = STRICT_AHCI, - }, { -+ .name = "sunxi-ahci", -+ .driver_data = SUNXI_AHCI, -+ }, { - /* sentinel */ - } - }; -@@ -81,6 +85,14 @@ struct ata_port_operations ahci_platform_ops = { - .udma_mask = ATA_UDMA6, - .port_ops = &ahci_platform_ops, - }, -+ [SUNXI_AHCI] = { -+ AHCI_HFLAGS (AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | -+ AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ), -+ .flags = AHCI_FLAG_COMMON, -+ .pio_mask = ATA_PIO4, -+ .udma_mask = ATA_UDMA6, -+ .port_ops = &ahci_platform_ops, -+ }, - }; - - static struct scsi_host_template ahci_platform_sht = { -diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c -new file mode 100644 -index 0000000..982641f ---- /dev/null -+++ b/drivers/ata/ahci_sunxi.c -@@ -0,0 +1,305 @@ -+/* -+ * Allwinner sunxi AHCI SATA platform driver -+ * Copyright 2013 Olliver Schinagl -+ * -+ * Based on the AHCI SATA platform driver by Freescale and Allwinner -+ * Based on code from -+ * Allwinner Technology Co., Ltd. -+ * Daniel Wang -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms and conditions of the GNU General Public License, -+ * version 2, as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along with -+ * this program. If not, see . -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "ahci.h" -+ -+#define DRV_NAME "sunxi-sata" -+ -+#define AHCI_BISTAFR 0x00a0 -+#define AHCI_BISTCR 0x00a4 -+#define AHCI_BISTFCTR 0x00a8 -+#define AHCI_BISTSR 0x00ac -+#define AHCI_BISTDECR 0x00b0 -+#define AHCI_DIAGNR0 0x00b4 -+#define AHCI_DIAGNR1 0x00b8 -+#define AHCI_OOBR 0x00bc -+#define AHCI_PHYCS0R 0x00c0 -+#define AHCI_PHYCS1R 0x00c4 -+#define AHCI_PHYCS2R 0x00c8 -+#define AHCI_TIMER1MS 0x00e0 -+#define AHCI_GPARAM1R 0x00e8 -+#define AHCI_GPARAM2R 0x00ec -+#define AHCI_PPARAMR 0x00f0 -+#define AHCI_TESTR 0x00f4 -+#define AHCI_VERSIONR 0x00f8 -+#define AHCI_IDR 0x00fc -+#define AHCI_RWCR 0x00fc -+#define AHCI_P0DMACR 0x0170 -+#define AHCI_P0PHYCR 0x0178 -+#define AHCI_P0PHYSR 0x017c -+ -+struct sunxi_ahci_data { -+ struct platform_device *ahci_pdev; -+ struct regulator *regulator; -+ struct clk *sata_clk; -+ struct clk *ahb_clk; -+}; -+ -+static void sunxi_clrbits(void __iomem *reg, u32 clr_val) -+{ -+ u32 reg_val; -+ -+ reg_val = readl(reg); -+ reg_val &= ~(clr_val); -+ writel(reg_val, reg); -+} -+ -+static void sunxi_setbits(void __iomem *reg, u32 set_val) -+{ -+ u32 reg_val; -+ -+ reg_val = readl(reg); -+ reg_val |= set_val; -+ writel(reg_val, reg); -+} -+ -+static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val) -+{ -+ u32 reg_val; -+ -+ reg_val = readl(reg); -+ reg_val &= ~(clr_val); -+ reg_val |= set_val; -+ writel(reg_val, reg); -+} -+ -+static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift) -+{ -+ return (readl(reg) >> shift) & mask; -+} -+ -+static int sunxi_ahci_phy_init(struct device *dev, void __iomem *reg_base) -+{ -+ u32 reg_val; -+ int timeout; -+ -+ /* This magic is from the original code */ -+ writel(0, reg_base + AHCI_RWCR); -+ mdelay(5); -+ -+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19)); -+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, -+ (0x7 << 24), -+ (0x5 << 24) | BIT(23) | BIT(18)); -+ sunxi_clrsetbits(reg_base + AHCI_PHYCS1R, -+ (0x3 << 16) | (0x1f << 8) | (0x3 << 6), -+ (0x2 << 16) | (0x6 << 8) | (0x2 << 6)); -+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15)); -+ sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19)); -+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, -+ (0x7 << 20), (0x3 << 20)); -+ sunxi_clrsetbits(reg_base + AHCI_PHYCS2R, -+ (0x1f << 5), (0x19 << 5)); -+ mdelay(5); -+ -+ sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19)); -+ -+ timeout = 0x100000; -+ do { -+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28); -+ } while (--timeout && (reg_val != 0x2)); -+ if (!timeout) -+ dev_err(dev, "PHY power up failed.\n"); -+ -+ sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24)); -+ -+ timeout = 0x100000; -+ do { -+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24); -+ } while (--timeout && reg_val); -+ if (!timeout) -+ dev_err(dev, "PHY calibration failed.\n"); -+ mdelay(15); -+ -+ writel(0x7, reg_base + AHCI_RWCR); -+ -+ return 0; -+} -+ -+static int sunxi_ahci_init(struct device *dev, void __iomem *reg_base) -+{ -+ struct sunxi_ahci_data *ahci_data; -+ int ret; -+ -+ ahci_data = dev_get_drvdata(dev->parent); -+ -+ ret = clk_prepare_enable(ahci_data->sata_clk); -+ if (ret < 0) -+ return ret; -+ -+ ret = clk_prepare_enable(ahci_data->ahb_clk); -+ if (ret < 0) -+ return ret; -+ -+ ret = regulator_enable(ahci_data->regulator); -+ if (ret) -+ return ret; -+ -+ return sunxi_ahci_phy_init(dev, reg_base); -+} -+ -+static void sunxi_ahci_exit(struct device *dev) -+{ -+ struct sunxi_ahci_data *ahci_data; -+ -+ ahci_data = dev_get_drvdata(dev->parent); -+ -+ regulator_disable(ahci_data->regulator); -+ -+ clk_disable_unprepare(ahci_data->ahb_clk); -+ clk_disable_unprepare(ahci_data->sata_clk); -+} -+ -+static struct ahci_platform_data sunxi_ahci_pdata = { -+ .init = sunxi_ahci_init, -+ .exit = sunxi_ahci_exit, -+}; -+ -+static int sunxi_ahci_remove(struct platform_device *pdev) -+{ -+ struct sunxi_ahci_data *ahci_data; -+ -+ ahci_data = platform_get_drvdata(pdev); -+ platform_device_unregister(ahci_data->ahci_pdev); -+ -+ dev_dbg(&pdev->dev, "driver unloaded\n"); -+ -+ return 0; -+} -+ -+static const struct of_device_id sunxi_ahci_of_match[] = { -+ { .compatible = "allwinner,sun4i-a10-ahci", .data = &sunxi_ahci_pdata}, -+ {/* sentinel */}, -+}; -+MODULE_DEVICE_TABLE(of, sunxi_ahci_of_match); -+ -+static int sunxi_ahci_probe(struct platform_device *pdev) -+{ -+ const struct ahci_platform_data *pdata; -+ const struct of_device_id *of_dev_id; -+ struct resource *mem, *irq, res[2]; -+ struct platform_device *ahci_pdev; -+ struct sunxi_ahci_data *ahci_data; -+ struct regulator *regulator; -+ int ret; -+ -+ regulator = devm_regulator_get(&pdev->dev, "pwr"); -+ if (IS_ERR(regulator)) { -+ ret = PTR_ERR(regulator); -+ if (ret != -EPROBE_DEFER) -+ dev_err(&pdev->dev, "no regulator found (%d)\n", ret); -+ return ret; -+ } -+ -+ ahci_data = devm_kzalloc(&pdev->dev, sizeof(*ahci_data), GFP_KERNEL); -+ if (!ahci_data) -+ return -ENOMEM; -+ -+ ahci_pdev = platform_device_alloc("sunxi-ahci", -1); -+ if (!ahci_pdev) -+ return -ENODEV; -+ -+ ahci_pdev->dev.parent = &pdev->dev; -+ -+ ahci_data->regulator = regulator; -+ ahci_data->ahb_clk = devm_clk_get(&pdev->dev, "ahb_sata"); -+ if (IS_ERR(ahci_data->ahb_clk)) { -+ ret = PTR_ERR(ahci_data->ahb_clk); -+ goto err_out; -+ } -+ -+ ahci_data->sata_clk = devm_clk_get(&pdev->dev, "pll6_sata"); -+ if (IS_ERR(ahci_data->sata_clk)) { -+ ret = PTR_ERR(ahci_data->sata_clk); -+ goto err_out; -+ } -+ -+ ahci_data->ahci_pdev = ahci_pdev; -+ platform_set_drvdata(pdev, ahci_data); -+ -+ ahci_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); -+ ahci_pdev->dev.dma_mask = &ahci_pdev->dev.coherent_dma_mask; -+ ahci_pdev->dev.of_node = pdev->dev.of_node; -+ -+ of_dev_id = of_match_device(sunxi_ahci_of_match, &pdev->dev); -+ if (of_dev_id) { -+ pdata = of_dev_id->data; -+ } else { -+ ret = -EINVAL; -+ goto err_out; -+ } -+ -+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -+ if (!mem || !irq) { -+ ret = -ENOMEM; -+ goto err_out; -+ } -+ res[0] = *mem; -+ res[1] = *irq; -+ ret = platform_device_add_resources(ahci_pdev, res, 2); -+ if (ret) -+ goto err_out; -+ -+ ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata)); -+ if (ret) -+ goto err_out; -+ -+ ret = platform_device_add(ahci_pdev); -+ if (ret) -+ goto err_out; -+ -+ return 0; -+ -+err_out: -+ platform_device_put(ahci_pdev); -+ return ret; -+} -+ -+static struct platform_driver sunxi_ahci_driver = { -+ .probe = sunxi_ahci_probe, -+ .remove = sunxi_ahci_remove, -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = sunxi_ahci_of_match, -+ }, -+}; -+module_platform_driver(sunxi_ahci_driver); -+ -+MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA platform driver"); -+MODULE_AUTHOR("Olliver Schinagl "); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("ahci:sunxi"); --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/192-dt-add-ahci-sun47i.patch b/target/linux/sunxi/patches-3.12/192-dt-add-ahci-sun47i.patch deleted file mode 100644 index a9d5056f93..0000000000 --- a/target/linux/sunxi/patches-3.12/192-dt-add-ahci-sun47i.patch +++ /dev/null @@ -1,193 +0,0 @@ -From e5b4d58432bec91414e82069a402d61e6aed631e Mon Sep 17 00:00:00 2001 -From: Oliver Schinagl -Date: Tue, 3 Dec 2013 12:10:11 +0100 -Subject: [PATCH] ARM: sunxi: dts: Add ahci support to a few A10 and A20 boards - -This patch adds sunxi sata support to A10 and A20 boards that have such -a connector. Some boards also feature a regulator via a GPIO and support -for this is also added. - -Signed-off-by: Olliver Schinagl ---- - arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 27 +++++++++++++++++++++++++ - arch/arm/boot/dts/sun4i-a10.dtsi | 9 +++++++++ - arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 27 +++++++++++++++++++++++++ - arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 27 +++++++++++++++++++++++++ - arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 26 ++++++++++++++++++++++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++ - 6 files changed, 125 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -index d193937..63bd00d 100644 ---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -@@ -51,7 +51,19 @@ - status = "okay"; - }; - -+ sata: ahci@01c18000 { -+ pwr-supply = <®_ahci_5v>; -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { -+ ahci_pwr_pin: ahci_pwr_pin@0 { -+ allwinner,pins = "PB8"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - mmc0_cd_pin_cubieboard: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; -@@ -102,4 +114,19 @@ - linux,default-trigger = "heartbeat"; - }; - }; -+ -+ regulators { -+ compatible = "simple-bus"; -+ pinctrl-names = "default"; -+ -+ reg_ahci_5v: ahci-5v { -+ compatible = "regulator-fixed"; -+ regulator-name = "ahci-5v"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ pinctrl-0 = <&ahci_pwr_pin>; -+ gpio = <&pio 1 8 0>; -+ enable-active-high; -+ }; -+ }; - }; -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 13bccd5..a6dafec 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -315,6 +315,15 @@ - status = "disabled"; - }; - -+ sata: ahci@01c18000 { -+ compatible = "allwinner,sun4i-a10-ahci"; -+ reg = <0x01c18000 0x1000>; -+ interrupts = <56>; -+ clocks = <&ahb_gates 25>, <&pll6 0>; -+ clock-names = "ahb_sata", "pll6_sata"; -+ status = "disabled"; -+ }; -+ - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-ic"; - reg = <0x01c20400 0x400>; -diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -index ea55563..1d810bb 100644 ---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -@@ -28,7 +28,19 @@ - status = "okay"; - }; - -+ sata: ahci@01c18000 { -+ pwr-supply = <®_ahci_5v>; -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { -+ ahci_pwr_pin: ahci_pwr_pin@0 { -+ allwinner,pins = "PB8"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - mmc0_cd_pin_cubieboard2: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; -@@ -86,4 +98,19 @@ - gpios = <&pio 7 20 0>; - }; - }; -+ -+ regulators { -+ compatible = "simple-bus"; -+ pinctrl-names = "default"; -+ -+ reg_ahci_5v: ahci-5v { -+ compatible = "regulator-fixed"; -+ regulator-name = "ahci-5v"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ pinctrl-0 = <&ahci_pwr_pin>; -+ gpio = <&pio 1 8 0>; -+ enable-active-high; -+ }; -+ }; - }; -diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -index bc04cc7..5e9f2ab 100644 ---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -@@ -37,7 +37,19 @@ - status = "okay"; - }; - -+ sata: ahci@01c18000 { -+ pwr-supply = <®_ahci_5v>; -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { -+ ahci_pwr_pin: ahci_pwr_pin@0 { -+ allwinner,pins = "PB8"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; -@@ -116,4 +128,18 @@ - default-state = "on"; - }; - }; -+ -+ regulators { -+ compatible = "simple-bus"; -+ -+ reg_ahci_5v: ahci-5v { -+ compatible = "regulator-fixed"; -+ regulator-name = "ahci-5v"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ pinctrl-0 = <&ahci_pwr_pin>; -+ gpio = <&pio 1 8 0>; -+ enable-active-high; -+ }; -+ }; - }; -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 7ebfc89..f161590 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -432,6 +432,15 @@ - }; - }; - -+ sata: ahci@01c18000 { -+ compatible = "allwinner,sun4i-a10-ahci"; -+ reg = <0x01c18000 0x1000>; -+ interrupts = <0 56 1>; -+ clocks = <&ahb_gates 25>, <&pll6 0>; -+ clock-names = "ahb_sata", "pll6_sata"; -+ status = "disabled"; -+ }; -+ - timer@01c20c00 { - compatible = "allwinner,sun4i-timer"; - reg = <0x01c20c00 0x90>; --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/200-emac-add-missing-free_irq.patch b/target/linux/sunxi/patches-3.12/200-emac-add-missing-free_irq.patch deleted file mode 100644 index 4b1be39281..0000000000 --- a/target/linux/sunxi/patches-3.12/200-emac-add-missing-free_irq.patch +++ /dev/null @@ -1,46 +0,0 @@ -From e9c56f8d2f851fb6d6ce6794c0f5463b862a878e Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Tue, 10 Dec 2013 19:40:43 +0100 -Subject: [PATCH] net: allwinner: emac: Add missing free_irq - -The sun4i-emac driver uses devm_request_irq at .ndo_open time, but relies on -the managed device mechanism to actually free it. This causes an issue whenever -someone wants to restart the interface, the interrupt still being held, and not -yet released. - -Fall back to using the regular request_irq at .ndo_open time, and introduce a -free_irq during .ndo_stop. - -Signed-off-by: Maxime Ripard -Cc: stable@vger.kernel.org # 3.11+ -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/allwinner/sun4i-emac.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c -index 50b853a..46dfb13 100644 ---- a/drivers/net/ethernet/allwinner/sun4i-emac.c -+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c -@@ -717,8 +717,7 @@ static int emac_open(struct net_device *dev) - if (netif_msg_ifup(db)) - dev_dbg(db->dev, "enabling %s\n", dev->name); - -- if (devm_request_irq(db->dev, dev->irq, &emac_interrupt, -- 0, dev->name, dev)) -+ if (request_irq(dev->irq, &emac_interrupt, 0, dev->name, dev)) - return -EAGAIN; - - /* Initialize EMAC board */ -@@ -774,6 +773,8 @@ static int emac_stop(struct net_device *ndev) - - emac_shutdown(ndev); - -+ free_irq(ndev->irq, ndev); -+ - return 0; - } - --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/201-dt-add-emac-aliases.patch b/target/linux/sunxi/patches-3.12/201-dt-add-emac-aliases.patch deleted file mode 100644 index 815cccb951..0000000000 --- a/target/linux/sunxi/patches-3.12/201-dt-add-emac-aliases.patch +++ /dev/null @@ -1,70 +0,0 @@ -From e751cce9b7b106b62c6d2c4f098c28c7feb10ef6 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Sat, 16 Nov 2013 15:17:29 -0300 -Subject: [PATCH] ARM: sunxi: dt: add EMAC aliases -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -U-Boot uses the ethernet0 alias to locate the right node to fill in -the MAC address of the first ethernet interface. This patch adds the -alias on all the sunxi SoCs with EMAC. In this way, people using -ethernet in U-Boot (eg, for tftp) can keep a consistent address on both -U-Boot and Linux with no additional effort. - -Signed-off-by: Emilio López -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 4 ++++ - arch/arm/boot/dts/sun5i-a10s.dtsi | 4 ++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 4 ++++ - 3 files changed, 12 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index f11f292..0bf70ee 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -15,6 +15,10 @@ - / { - interrupt-parent = <&intc>; - -+ aliases { -+ ethernet0 = &emac; -+ }; -+ - cpus { - #address-cells = <1>; - #size-cells = <0>; -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 5247674..b4764be 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -16,6 +16,10 @@ - / { - interrupt-parent = <&intc>; - -+ aliases { -+ ethernet0 = &emac; -+ }; -+ - cpus { - cpu@0 { - compatible = "arm,cortex-a8"; -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 830fcd5..74bf906 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -16,6 +16,10 @@ - / { - interrupt-parent = <&gic>; - -+ aliases { -+ ethernet0 = &emac; -+ }; -+ - cpus { - #address-cells = <1>; - #size-cells = <0>; --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/210-fix-a20-irqtypes.patch b/target/linux/sunxi/patches-3.12/210-fix-a20-irqtypes.patch deleted file mode 100644 index e1c7c9a39f..0000000000 --- a/target/linux/sunxi/patches-3.12/210-fix-a20-irqtypes.patch +++ /dev/null @@ -1,179 +0,0 @@ -From 3e52e08e7f8f9cb1137f232e3bfa00f89ed27475 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sat, 7 Dec 2013 12:38:32 +0100 -Subject: [PATCH] ARM: sun7i: dt: Fix interrupt trigger types - -The Allwinner A20 uses the ARM GIC as its internal interrupts controller. The -GIC can work on several interrupt triggers, and the A20 was actually setting it -up to use a rising edge as a trigger, while it was actually a level high -trigger, leading to some interrupts that would be completely ignored if the -edge was missed. - -Signed-off-by: Maxime Ripard -Reported-by: Hans de Goede -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 42 ++++++++++++++++++++-------------------- - 1 file changed, 21 insertions(+), 21 deletions(-) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index f1a6b24..0b7fcc1 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -298,7 +298,7 @@ - emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-emac"; - reg = <0x01c0b000 0x1000>; -- interrupts = <0 55 1>; -+ interrupts = <0 55 4>; - clocks = <&ahb_gates 17>; - status = "disabled"; - }; -@@ -324,7 +324,7 @@ - pio: pinctrl@01c20800 { - compatible = "allwinner,sun7i-a20-pinctrl"; - reg = <0x01c20800 0x400>; -- interrupts = <0 28 1>; -+ interrupts = <0 28 4>; - clocks = <&apb0_gates 5>; - gpio-controller; - interrupt-controller; -@@ -405,12 +405,12 @@ - timer@01c20c00 { - compatible = "allwinner,sun4i-timer"; - reg = <0x01c20c00 0x90>; -- interrupts = <0 22 1>, -- <0 23 1>, -- <0 24 1>, -- <0 25 1>, -- <0 67 1>, -- <0 68 1>; -+ interrupts = <0 22 4>, -+ <0 23 4>, -+ <0 24 4>, -+ <0 25 4>, -+ <0 67 4>, -+ <0 68 4>; - clocks = <&osc24M>; - }; - -@@ -432,7 +432,7 @@ - uart0: serial@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; -- interrupts = <0 1 1>; -+ interrupts = <0 1 4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 16>; -@@ -442,7 +442,7 @@ - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; -- interrupts = <0 2 1>; -+ interrupts = <0 2 4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 17>; -@@ -452,7 +452,7 @@ - uart2: serial@01c28800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28800 0x400>; -- interrupts = <0 3 1>; -+ interrupts = <0 3 4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 18>; -@@ -462,7 +462,7 @@ - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; -- interrupts = <0 4 1>; -+ interrupts = <0 4 4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 19>; -@@ -472,7 +472,7 @@ - uart4: serial@01c29000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c29000 0x400>; -- interrupts = <0 17 1>; -+ interrupts = <0 17 4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 20>; -@@ -482,7 +482,7 @@ - uart5: serial@01c29400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c29400 0x400>; -- interrupts = <0 18 1>; -+ interrupts = <0 18 4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 21>; -@@ -492,7 +492,7 @@ - uart6: serial@01c29800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c29800 0x400>; -- interrupts = <0 19 1>; -+ interrupts = <0 19 4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 22>; -@@ -502,7 +502,7 @@ - uart7: serial@01c29c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c29c00 0x400>; -- interrupts = <0 20 1>; -+ interrupts = <0 20 4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 23>; -@@ -512,7 +512,7 @@ - i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun4i-i2c"; - reg = <0x01c2ac00 0x400>; -- interrupts = <0 7 1>; -+ interrupts = <0 7 4>; - clocks = <&apb1_gates 0>; - clock-frequency = <100000>; - status = "disabled"; -@@ -521,7 +521,7 @@ - i2c1: i2c@01c2b000 { - compatible = "allwinner,sun4i-i2c"; - reg = <0x01c2b000 0x400>; -- interrupts = <0 8 1>; -+ interrupts = <0 8 4>; - clocks = <&apb1_gates 1>; - clock-frequency = <100000>; - status = "disabled"; -@@ -530,7 +530,7 @@ - i2c2: i2c@01c2b400 { - compatible = "allwinner,sun4i-i2c"; - reg = <0x01c2b400 0x400>; -- interrupts = <0 9 1>; -+ interrupts = <0 9 4>; - clocks = <&apb1_gates 2>; - clock-frequency = <100000>; - status = "disabled"; -@@ -539,7 +539,7 @@ - i2c3: i2c@01c2b800 { - compatible = "allwinner,sun4i-i2c"; - reg = <0x01c2b800 0x400>; -- interrupts = <0 88 1>; -+ interrupts = <0 88 4>; - clocks = <&apb1_gates 3>; - clock-frequency = <100000>; - status = "disabled"; -@@ -548,7 +548,7 @@ - i2c4: i2c@01c2bc00 { - compatible = "allwinner,sun4i-i2c"; - reg = <0x01c2bc00 0x400>; -- interrupts = <0 89 1>; -+ interrupts = <0 89 4>; - clocks = <&apb1_gates 15>; - clock-frequency = <100000>; - status = "disabled"; --- -1.8.5.1 - diff --git a/target/linux/sunxi/patches-3.12/230-dt-add-pcduino.patch b/target/linux/sunxi/patches-3.12/230-dt-add-pcduino.patch deleted file mode 100644 index 91c633cf17..0000000000 --- a/target/linux/sunxi/patches-3.12/230-dt-add-pcduino.patch +++ /dev/null @@ -1,11 +0,0 @@ -diff -ruN old/arch/arm/boot/dts/Makefile new/arch/arm/boot/dts/Makefile ---- old/arch/arm/boot/dts/Makefile 2014-01-02 22:08:07.288255421 +0100 -+++ new/arch/arm/boot/dts/Makefile 2014-01-02 21:25:02.000000000 +0100 -@@ -231,6 +231,7 @@ - sun4i-a10-cubieboard.dtb \ - sun4i-a10-mini-xplus.dtb \ - sun4i-a10-hackberry.dtb \ -+ sun4i-a10-pcduino.dtb \ - sun5i-a10s-olinuxino-micro.dtb \ - sun5i-a13-olinuxino.dtb \ - sun6i-a31-colombus.dtb \ diff --git a/target/linux/sunxi/patches-3.12/231-add-a10-olinuxino-lime.patch b/target/linux/sunxi/patches-3.12/231-add-a10-olinuxino-lime.patch deleted file mode 100644 index 1c7a15c7aa..0000000000 --- a/target/linux/sunxi/patches-3.12/231-add-a10-olinuxino-lime.patch +++ /dev/null @@ -1,12 +0,0 @@ -Index: linux-3.12.5/arch/arm/boot/dts/Makefile -=================================================================== ---- linux-3.12.5.orig/arch/arm/boot/dts/Makefile 2014-01-07 20:20:35.112013217 +0100 -+++ linux-3.12.5/arch/arm/boot/dts/Makefile 2014-01-07 20:20:35.124013454 +0100 -@@ -232,6 +232,7 @@ - sun4i-a10-mini-xplus.dtb \ - sun4i-a10-hackberry.dtb \ - sun4i-a10-pcduino.dtb \ -+ sun4i-a10-olinuxino-lime.dtb \ - sun5i-a10s-olinuxino-micro.dtb \ - sun5i-a13-olinuxino.dtb \ - sun5i-a13-olinuxino-micro.dtb \ diff --git a/target/linux/sunxi/patches-3.12/232-dt-add-cubietruck.patch b/target/linux/sunxi/patches-3.12/232-dt-add-cubietruck.patch deleted file mode 100644 index 662d17d051..0000000000 --- a/target/linux/sunxi/patches-3.12/232-dt-add-cubietruck.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -235,6 +235,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ - sun5i-a13-olinuxino.dtb \ - sun6i-a31-colombus.dtb \ - sun7i-a20-cubieboard2.dtb \ -+ sun7i-a20-cubietruck.dtb \ - sun7i-a20-olinuxino-micro.dtb - dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ - tegra20-iris-512.dtb \