From: Jeff Garzik <jgarzik@pobox.com>
Date: Sun, 31 Jul 2005 17:05:43 +0000 (-0400)
Subject: ieee80211: trim trailing whitespace
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2ff55fefc32bc8ead7eb46287e4daf0c2d83dafa;p=openwrt%2Fstaging%2Fblogic.git

ieee80211: trim trailing whitespace
---

diff --git a/net/ieee80211/Kconfig b/net/ieee80211/Kconfig
index 961c711eda97..58ed4319e693 100644
--- a/net/ieee80211/Kconfig
+++ b/net/ieee80211/Kconfig
@@ -2,19 +2,19 @@ config IEEE80211
 	tristate "Generic IEEE 802.11 Networking Stack"
 	select NET_RADIO
 	---help---
-	This option enables the hardware independent IEEE 802.11 
+	This option enables the hardware independent IEEE 802.11
 	networking stack.
 
 config IEEE80211_DEBUG
 	bool "Enable full debugging output"
 	depends on IEEE80211
 	---help---
-	  This option will enable debug tracing output for the 
-	  ieee80211 network stack.  
+	  This option will enable debug tracing output for the
+	  ieee80211 network stack.
 
-	  This will result in the kernel module being ~70k larger.  You 
-	  can control which debug output is sent to the kernel log by 
-	  setting the value in 
+	  This will result in the kernel module being ~70k larger.  You
+	  can control which debug output is sent to the kernel log by
+	  setting the value in
 
 	  /proc/net/ieee80211/debug_level
 
@@ -22,10 +22,10 @@ config IEEE80211_DEBUG
 
 	  % echo 0x00000FFO > /proc/net/ieee80211/debug_level
 
-	  For a list of values you can assign to debug_level, you 
+	  For a list of values you can assign to debug_level, you
 	  can look at the bit mask values in <net/ieee80211.h>
 
-	  If you are not trying to debug or develop the ieee80211 
+	  If you are not trying to debug or develop the ieee80211
 	  subsystem, you most likely want to say N here.
 
 config IEEE80211_CRYPT_WEP
@@ -35,7 +35,7 @@ config IEEE80211_CRYPT_WEP
 	select CRYPTO_ARC4
 	select CRC32
 	---help---
-	Include software based cipher suites in support of IEEE 
+	Include software based cipher suites in support of IEEE
 	802.11's WEP.  This is needed for WEP as well as 802.1x.
 
 	This can be compiled as a modules and it will be called
@@ -47,8 +47,8 @@ config IEEE80211_CRYPT_CCMP
 	select CRYPTO
 	select CRYPTO_AES
 	---help---
-	Include software based cipher suites in support of IEEE 802.11i 
-	(aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled 
+	Include software based cipher suites in support of IEEE 802.11i
+	(aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled
 	networks.
 
 	This can be compiled as a modules and it will be called
@@ -60,8 +60,8 @@ config IEEE80211_CRYPT_TKIP
 	select CRYPTO
 	select CRYPTO_MICHAEL_MIC
 	---help---
-	Include software based cipher suites in support of IEEE 802.11i 
-	(aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with TKIP enabled 
+	Include software based cipher suites in support of IEEE 802.11i
+	(aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with TKIP enabled
 	networks.
 
 	This can be compiled as a modules and it will be called
diff --git a/net/ieee80211/Makefile b/net/ieee80211/Makefile
index 29be9cae1def..a6ccac5baea8 100644
--- a/net/ieee80211/Makefile
+++ b/net/ieee80211/Makefile
@@ -1,4 +1,4 @@
-obj-$(CONFIG_IEEE80211) += ieee80211.o 
+obj-$(CONFIG_IEEE80211) += ieee80211.o
 obj-$(CONFIG_IEEE80211) += ieee80211_crypt.o
 obj-$(CONFIG_IEEE80211_CRYPT_WEP) += ieee80211_crypt_wep.o
 obj-$(CONFIG_IEEE80211_CRYPT_CCMP) += ieee80211_crypt_ccmp.o