From: Jan Forman <jforman@tuta.io>
Date: Mon, 31 Oct 2022 21:15:56 +0000 (+0100)
Subject: ath79: Convert calibration data to nvmem
X-Git-Tag: v23.05.0-rc1~94
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2f4b6d0f89f1e6874a6452962d165884fca3cf3b;p=openwrt%2Fopenwrt.git

ath79: Convert calibration data to nvmem

For D-link DIR-859 and DIR-869
Replace the mtd-cal-data by an nvmem-cell.
Add the PCIe node for the ath10k radio to the devicetree.
Thanks to DragonBlue for this patch

Signed-off-by: Jan Forman <jforman@tuta.io>
---

diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi b/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi
index 65948ecb22..556ba604a6 100644
--- a/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-8x9-a1.dtsi
@@ -26,6 +26,14 @@
 
 &pcie {
 	status = "okay";
+
+	wifi@0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0x0000 0 0 0 0>;
+
+		nvmem-cells = <&calibration_ath10k>, <&macaddr_devdata_94>;
+		nvmem-cell-names = "calibration", "mac-address-ascii";
+	};
 };
 
 &spi {
@@ -57,6 +65,18 @@
 				label = "devdata";
 				reg = <0x050000 0x10000>;
 				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_devdata_94: macaddr@94 {
+					reg = <0x94 0x11>;
+				};
+
+				macaddr_devdata_b0: macaddr@b0 {
+					reg = <0xb0 0x11>;
+				};
 			};
 
 			partition@60000 {
@@ -71,10 +91,22 @@
 				reg = <0x070000 0xf80000>;
 			};
 
-			art: partition@ff0000 {
+			partition@ff0000 {
 				label = "art";
 				reg = <0xff0000 0x010000>;
 				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				calibration_ath9k: calibration@1000 {
+					reg = <0x1000 0x440>;
+				};
+
+				calibration_ath10k: calibration@5000 {
+					reg = <0x5000 0x844>;
+				};	
 			};
 		};
 	};
@@ -114,5 +146,6 @@
 &wmac {
 	status = "okay";
 
-	qca,no-eeprom;
+	nvmem-cells = <&calibration_ath9k>, <&macaddr_devdata_b0>;
+	nvmem-cell-names = "calibration", "mac-address-ascii";
 };
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 022f5e2947..a57479b87c 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -30,7 +30,6 @@ case "$FIRMWARE" in
 	dlink,dir-842-c1|\
 	dlink,dir-842-c2|\
 	dlink,dir-842-c3|\
-	dlink,dir-859-a1|\
 	nec,wf1200cr|\
 	nec,wg1200cr|\
 	wd,mynet-n600|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 4db311fde0..f0a3755de9 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -68,10 +68,6 @@ case "$FIRMWARE" in
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
 		;;
-	dlink,dir-859-a1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
-		;;
 	engenius,ecb1200|\
 	engenius,ecb1750)
 		caldata_extract "art" 0x5000 0x844