From: John Crispin Date: Mon, 14 Sep 2015 20:08:55 +0000 (+0000) Subject: ramips: add support for Planex DB-WRT01 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2efdc7c896fcd846e9a4732f93dc36e095d37a07;p=openwrt%2Fstaging%2Fthess.git ramips: add support for Planex DB-WRT01 This patch add support for Planex DB-WRT01. DANBOARD route on the MT7620A SoC with two Ethernet port and a 802.11n 2.4 GHz radio. DANBOARD is Cartoon character. Signed-off-by: YuheiOKAWA SVN-Revision: 46918 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 71cf3acb10..a9959e37c1 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -87,6 +87,9 @@ d105) ucidef_set_led_default "power" "POWER" "$board:red:power" "1" set_usb_led "$board:green:usb" ;; +db-wrt01) + ucidef_set_led_default "power" "power" "$board:orange:power" "1" + ;; dcs-930l-b1) ucidef_set_led_default "power" "POWER" "$board:red:power" "1" ucidef_set_led_netdev "wifi" "WiFi" "$board:blue:wps" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 6a2f042248..02cd6824d0 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -61,6 +61,7 @@ ramips_setup_interfaces() ;; 3g-6200n|\ ai-br100|\ + db-wrt01|\ dir-300-b7|\ dir-320-b1|\ dir-610-a1|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index a4911b023c..f886b5da8a 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -94,6 +94,7 @@ get_status_led() { y1s) status_led="$board:blue:power" ;; + db-wrt01|\ esr-9753) status_led="$board:orange:power" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 5cafd4593d..5b6808e0b3 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -97,6 +97,9 @@ ramips_board_detect() { *"DAP-1350") name="dap-1350" ;; + *"DB-WRT01") + name="db-wrt01" + ;; *"DCS-930") name="dcs-930" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 53e7070c99..844ed5db95 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -36,6 +36,7 @@ platform_check_image() { cf-wr800n|\ d105|\ dap-1350|\ + db-wrt01|\ dcs-930|\ dcs-930l-b1|\ dir-300-b1|\ diff --git a/target/linux/ramips/dts/DB-WRT01.dts b/target/linux/ramips/dts/DB-WRT01.dts new file mode 100644 index 0000000000..d0fbaf3c2a --- /dev/null +++ b/target/linux/ramips/dts/DB-WRT01.dts @@ -0,0 +1,100 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "ralink,mt7620a-soc"; + model = "Planex DB-WRT01"; + + palmbus@10000000 { + gpio1: gpio@638 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "en25q64"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l6405d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi refclk", "rgmii1"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + ralink,port-map = "llllw"; + }; + + gsw@10110000 { + ralink,port4 = "ephy"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + pcie@10140000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "db-wrt01:orange:power"; + gpios = <&gpio1 1 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + s1 { + label = "wps"; + gpios = <&gpio0 2 1>; + linux,code = <0x211>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 2f4d4cbc61..4632ad2cd3 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -868,6 +868,7 @@ Image/Build/Profile/CF-WR800N=$(call BuildFirmware/Default8M/$(1),$(1),cf-wr800n Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size)) na930_mtd_size=20971520 Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size)) +Image/Build/Profile/DB-WRT01=$(call BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01) Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP) Image/Build/Profile/OY-0001=$(call BuildFirmware/Default16M/$(1),$(1),oy-0001,OY-0001) Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),y1,Y1) @@ -901,6 +902,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/WHR300HP2,$(1)) $(call Image/Build/Profile/WHR600D,$(1)) $(call Image/Build/Profile/WHR1166D,$(1)) + $(call Image/Build/Profile/DB-WRT01,$(1)) $(call Image/Build/Profile/MZK-750DHP,$(1)) $(call Image/Build/Profile/NA930,$(1)) $(call Image/Build/Profile/OY-0001,$(1))