From: Gabor Juhos Date: Fri, 26 Mar 2010 10:45:31 +0000 (+0000) Subject: adm5120: nuke 2.6.30 stuff X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2ef84970ea27d144050fe509a78fdc565c69135d;p=openwrt%2Fstaging%2Fnbd.git adm5120: nuke 2.6.30 stuff SVN-Revision: 20445 --- diff --git a/target/linux/adm5120/patches-2.6.30/001-adm5120.patch b/target/linux/adm5120/patches-2.6.30/001-adm5120.patch deleted file mode 100644 index 55472340b4..0000000000 --- a/target/linux/adm5120/patches-2.6.30/001-adm5120.patch +++ /dev/null @@ -1,57 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -19,6 +19,21 @@ choice - prompt "System type" - default SGI_IP22 - -+config ADM5120 -+ bool "Infineon/ADMtek ADM5120 SoC based machines" -+ select CEVT_R4K -+ select CSRC_R4K -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select ARCH_REQUIRE_GPIOLIB -+ select SWAP_IO_SPACE if CPU_BIG_ENDIAN -+ select MIPS_MACHINE -+ - config MACH_ALCHEMY - bool "Alchemy processor based machines" - -@@ -633,6 +648,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD - - endchoice - -+source "arch/mips/adm5120/Kconfig" - source "arch/mips/alchemy/Kconfig" - source "arch/mips/basler/excite/Kconfig" - source "arch/mips/jazz/Kconfig" ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -181,6 +181,22 @@ cflags-$(CONFIG_MACH_JAZZ) += -I$(srctre - load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 - - # -+# Infineon/ADMtek ADM5120 -+# -+libs-$(CONFIG_ADM5120) += arch/mips/adm5120/prom/ -+core-$(CONFIG_ADM5120) += arch/mips/adm5120/common/ -+core-$(CONFIG_ADM5120_OEM_CELLVISION) += arch/mips/adm5120/cellvision/ -+core-$(CONFIG_ADM5120_OEM_COMPEX) += arch/mips/adm5120/compex/ -+core-$(CONFIG_ADM5120_OEM_EDIMAX) += arch/mips/adm5120/edimax/ -+core-$(CONFIG_ADM5120_OEM_INFINEON) += arch/mips/adm5120/infineon/ -+core-$(CONFIG_ADM5120_OEM_MIKROTIK) += arch/mips/adm5120/mikrotik/ -+core-$(CONFIG_ADM5120_OEM_MOTOROLA) += arch/mips/adm5120/motorola/ -+core-$(CONFIG_ADM5120_OEM_OSBRIDGE) += arch/mips/adm5120/osbridge/ -+core-$(CONFIG_ADM5120_OEM_ZYXEL) += arch/mips/adm5120/zyxel/ -+cflags-$(CONFIG_ADM5120) += -I$(srctree)/arch/mips/include/asm/mach-adm5120 -+load-$(CONFIG_ADM5120) += 0xffffffff80001000 -+ -+# - # Common Alchemy Au1x00 stuff - # - core-$(CONFIG_SOC_AU1X00) += arch/mips/alchemy/common/ diff --git a/target/linux/adm5120/patches-2.6.30/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.30/002-adm5120_flash.patch deleted file mode 100644 index 97f5b96cc2..0000000000 --- a/target/linux/adm5120/patches-2.6.30/002-adm5120_flash.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -562,4 +562,8 @@ config MTD_VMU - To build this as a module select M here, the module will be called - vmu-flash. - -+config MTD_ADM5120 -+ tristate "Map driver for ADM5120 based boards" -+ depends on ADM5120 -+ - endmenu ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -42,6 +42,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash. - obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o - obj-$(CONFIG_MTD_PCI) += pci.o - obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o -+obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o - obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o - obj-$(CONFIG_MTD_EDB7312) += edb7312.o - obj-$(CONFIG_MTD_IMPA7) += impa7.o diff --git a/target/linux/adm5120/patches-2.6.30/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.30/003-adm5120_switch.patch deleted file mode 100644 index 771dd5f807..0000000000 --- a/target/linux/adm5120/patches-2.6.30/003-adm5120_switch.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -612,6 +612,10 @@ config MIPS_AU1X00_ENET - If you have an Alchemy Semi AU1X00 based system - say Y. Otherwise, say N. - -+config ADM5120_ENET -+ tristate "ADM5120 Ethernet switch support" -+ depends on ADM5120 -+ - config SGI_IOC3_ETH - bool "SGI IOC3 Ethernet" - depends on PCI && SGI_IP27 ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -195,6 +195,7 @@ obj-$(CONFIG_SC92031) += sc92031.o - # This is also a 82596 and should probably be merged - obj-$(CONFIG_LP486E) += lp486e.o - -+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o - obj-$(CONFIG_ETH16I) += eth16i.o - obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o - obj-$(CONFIG_HPLANCE) += hplance.o 7990.o diff --git a/target/linux/adm5120/patches-2.6.30/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.30/005-adm5120_usb.patch deleted file mode 100644 index ca81a92cd1..0000000000 --- a/target/linux/adm5120/patches-2.6.30/005-adm5120_usb.patch +++ /dev/null @@ -1,33 +0,0 @@ ---- a/drivers/usb/Makefile -+++ b/drivers/usb/Makefile -@@ -9,6 +9,7 @@ obj-$(CONFIG_USB) += core/ - obj-$(CONFIG_USB_MON) += mon/ - - obj-$(CONFIG_PCI) += host/ -+obj-$(CONFIG_USB_ADM5120_HCD) += host/ - obj-$(CONFIG_USB_EHCI_HCD) += host/ - obj-$(CONFIG_USB_ISP116X_HCD) += host/ - obj-$(CONFIG_USB_OHCI_HCD) += host/ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -4,6 +4,10 @@ - comment "USB Host Controller Drivers" - depends on USB - -+config USB_ADM5120_HCD -+ tristate "ADM5120 HCD support (EXPERIMENTAL)" -+ depends on USB && ADM5120 && EXPERIMENTAL -+ - config USB_C67X00_HCD - tristate "Cypress C67x00 HCD support" - depends on USB ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_WHCI_HCD) += whci/ - - obj-$(CONFIG_PCI) += pci-quirks.o - -+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o - obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o - obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o - obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff --git a/target/linux/adm5120/patches-2.6.30/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.30/007-adm5120_pci.patch deleted file mode 100644 index 7869c9782b..0000000000 --- a/target/linux/adm5120/patches-2.6.30/007-adm5120_pci.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -52,3 +52,4 @@ obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc - obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o - obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o - obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o -+obj-$(CONFIG_ADM5120) += pci-adm5120.o ---- a/include/linux/pci_ids.h -+++ b/include/linux/pci_ids.h -@@ -1764,6 +1764,9 @@ - #define PCI_VENDOR_ID_ESDGMBH 0x12fe - #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 - -+#define PCI_VENDOR_ID_ADMTEK 0x1317 -+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120 -+ - #define PCI_VENDOR_ID_SIIG 0x131f - #define PCI_SUBVENDOR_ID_SIIG 0x131f - #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 diff --git a/target/linux/adm5120/patches-2.6.30/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.30/009-adm5120_leds_switch_trigger.patch deleted file mode 100644 index 4778deac0a..0000000000 --- a/target/linux/adm5120/patches-2.6.30/009-adm5120_leds_switch_trigger.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -306,4 +306,12 @@ config LEDS_TRIGGER_NETDEV - This allows LEDs to be controlled by network device activity. - If unsure, say Y. - -+config LEDS_TRIGGER_ADM5120_SWITCH -+ tristate "LED ADM5120 Switch Port Status Trigger" -+ depends on LEDS_TRIGGERS && ADM5120 -+ help -+ This allows LEDs to be controlled by the port states of -+ the ADM5120 built-in Ethernet Switch -+ If unsure, say N. -+ - endif # NEW_LEDS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -40,3 +40,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt - obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o - obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o - obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o -+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o diff --git a/target/linux/adm5120/patches-2.6.30/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.30/101-cfi_fixup_macronix_bootloc.patch deleted file mode 100644 index 60c3ab91e7..0000000000 --- a/target/linux/adm5120/patches-2.6.30/101-cfi_fixup_macronix_bootloc.patch +++ /dev/null @@ -1,84 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -53,6 +53,12 @@ - #define AT49BV6416 0x00d6 - #define MANUFACTURER_SAMSUNG 0x00ec - -+/* Macronix */ -+#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */ -+#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */ -+#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */ -+#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */ -+ - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); - static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -@@ -293,6 +299,41 @@ static void fixup_M29W128G_write_buffer( - } - } - -+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC -+/* -+ * Some Macronix chips has no/bad bootblock information in the CFI table -+ */ -+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param) -+{ -+ struct map_info *map = mtd->priv; -+ struct cfi_private *cfi = map->fldrv_priv; -+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv; -+ __u8 t; -+ -+ switch (cfi->id) { -+ /* TODO: put affected chip ids here */ -+ case MX29LV160B: -+ case MX29LV320B: -+ t = 2; /* Bottom boot */ -+ break; -+ case MX29LV160T: -+ case MX29LV320T: -+ t = 3; /* Top boot */ -+ break; -+ default: -+ return; -+ } -+ -+ if (extp->TopBottom == t) -+ /* boot location detected by the CFI layer is correct */ -+ return; -+ -+ extp->TopBottom = t; -+ printk("%s: Macronix chip detected, id:0x%04X, boot location forced " -+ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top"); -+} -+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */ -+ - static struct cfi_fixup cfi_fixup_table[] = { - { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, - #ifdef AMD_BOOTLOC_BUG -@@ -330,6 +371,9 @@ static struct cfi_fixup fixup_table[] = - */ - { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL }, - { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL }, -+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC -+ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, }, -+#endif - { 0, 0, NULL, NULL } - }; - ---- a/drivers/mtd/chips/Kconfig -+++ b/drivers/mtd/chips/Kconfig -@@ -198,6 +198,14 @@ config MTD_CFI_AMDSTD - provides support for one of those command sets, used on chips - including the AMD Am29LV320. - -+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC -+ bool "Fix boot-block location for Macronix flash chips" -+ depends on MTD_CFI_AMDSTD -+ help -+ Some Macronix flash chips have no/wrong boot-block location in the -+ CFI table, and the driver may detect the type incorrectly. Select -+ this if your board has such chip. -+ - config MTD_CFI_STAA - tristate "Support for ST (Advanced Architecture) flash chips" - depends on MTD_GEN_PROBE diff --git a/target/linux/adm5120/patches-2.6.30/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.30/102-jedec_pmc_39lvxxx_chips.patch deleted file mode 100644 index 55a201d413..0000000000 --- a/target/linux/adm5120/patches-2.6.30/102-jedec_pmc_39lvxxx_chips.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/drivers/mtd/chips/jedec_probe.c -+++ b/drivers/mtd/chips/jedec_probe.c -@@ -128,6 +128,10 @@ - #define UPD29F064115 0x221C - - /* PMC */ -+#define PM39LV512 0x001B -+#define PM39LV010 0x001C -+#define PM39LV020 0x003D -+#define PM39LV040 0x003E - #define PM49FL002 0x006D - #define PM49FL004 0x006E - #define PM49FL008 0x006A -@@ -1249,6 +1253,54 @@ static const struct amd_flash_info jedec - ERASEINFO(0x02000,2), - ERASEINFO(0x04000,1), - } -+ }, { -+ .mfr_id = MANUFACTURER_PMC, -+ .dev_id = PM39LV512, -+ .name = "PMC Pm39LV512", -+ .devtypes = CFI_DEVICETYPE_X8, -+ .uaddr = MTD_UADDR_0x0555_0x02AA, -+ .dev_size = SIZE_64KiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x01000,16), -+ } -+ }, { -+ .mfr_id = MANUFACTURER_PMC, -+ .dev_id = PM39LV010, -+ .name = "PMC Pm39LV010", -+ .devtypes = CFI_DEVICETYPE_X8, -+ .uaddr = MTD_UADDR_0x0555_0x02AA, -+ .dev_size = SIZE_128KiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x01000,32), -+ } -+ }, { -+ .mfr_id = MANUFACTURER_PMC, -+ .dev_id = PM39LV020, -+ .name = "PMC Pm39LV020", -+ .devtypes = CFI_DEVICETYPE_X8, -+ .uaddr = MTD_UADDR_0x0555_0x02AA, -+ .dev_size = SIZE_256KiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x01000,64), -+ } -+ }, { -+ .mfr_id = MANUFACTURER_PMC, -+ .dev_id = PM39LV040, -+ .name = "PMC Pm39LV040", -+ .devtypes = CFI_DEVICETYPE_X8, -+ .uaddr = MTD_UADDR_0x0555_0x02AA, -+ .dev_size = SIZE_512KiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x01000,128), -+ } - }, { - .mfr_id = MANUFACTURER_PMC, - .dev_id = PM49FL002, diff --git a/target/linux/adm5120/patches-2.6.30/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.30/103-mtd_trxsplit.patch deleted file mode 100644 index 69f1035505..0000000000 --- a/target/linux/adm5120/patches-2.6.30/103-mtd_trxsplit.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -63,6 +63,11 @@ config MTD_ROOTFS_SPLIT - depends on MTD_PARTITIONS - default y - -+config MTD_TRXSPLIT -+ bool "Automatically find and split TRX partitions" -+ depends on MTD_PARTITIONS -+ default n -+ - config MTD_REDBOOT_PARTS - tristate "RedBoot partition table parsing" - depends on MTD_PARTITIONS ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o mtdbdi. - mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o - - obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o -+obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o diff --git a/target/linux/adm5120/patches-2.6.30/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.30/120-rb153_cf_driver.patch deleted file mode 100644 index 3d9bbdd51a..0000000000 --- a/target/linux/adm5120/patches-2.6.30/120-rb153_cf_driver.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/drivers/ata/Makefile -+++ b/drivers/ata/Makefile -@@ -73,6 +73,7 @@ obj-$(CONFIG_PATA_OCTEON_CF) += pata_oct - obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o - obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o - obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o -+obj-$(CONFIG_PATA_RB153_CF) += pata_rb153_cf.o - # Should be last but two libata driver - obj-$(CONFIG_PATA_ACPI) += pata_acpi.o - # Should be last but one libata driver ---- a/drivers/ata/Kconfig -+++ b/drivers/ata/Kconfig -@@ -568,6 +568,15 @@ config PATA_RADISYS - - If unsure, say N. - -+config PATA_RB153_CF -+ tristate "RouterBOARD 153 Compact Flash support" -+ depends on ADM5120_MACH_RB_153 -+ help -+ This option enables support for a Compact Flash connected on -+ the RouterBOARD 153. -+ -+ If unsure, say N. -+ - config PATA_RB532 - tristate "RouterBoard 532 PATA CompactFlash support" - depends on MIKROTIK_RB532 diff --git a/target/linux/adm5120/patches-2.6.30/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.30/200-amba_pl010_hacks.patch deleted file mode 100644 index 285764411e..0000000000 --- a/target/linux/adm5120/patches-2.6.30/200-amba_pl010_hacks.patch +++ /dev/null @@ -1,378 +0,0 @@ ---- a/drivers/serial/amba-pl010.c -+++ b/drivers/serial/amba-pl010.c -@@ -50,11 +50,10 @@ - - #include - --#define UART_NR 8 -- - #define SERIAL_AMBA_MAJOR 204 - #define SERIAL_AMBA_MINOR 16 --#define SERIAL_AMBA_NR UART_NR -+#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS -+#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME - - #define AMBA_ISR_PASS_LIMIT 256 - -@@ -80,9 +79,9 @@ static void pl010_stop_tx(struct uart_po - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - -- cr = readb(uap->port.membase + UART010_CR); -+ cr = __raw_readl(uap->port.membase + UART010_CR); - cr &= ~UART010_CR_TIE; -- writel(cr, uap->port.membase + UART010_CR); -+ __raw_writel(cr, uap->port.membase + UART010_CR); - } - - static void pl010_start_tx(struct uart_port *port) -@@ -90,9 +89,9 @@ static void pl010_start_tx(struct uart_p - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - -- cr = readb(uap->port.membase + UART010_CR); -+ cr = __raw_readl(uap->port.membase + UART010_CR); - cr |= UART010_CR_TIE; -- writel(cr, uap->port.membase + UART010_CR); -+ __raw_writel(cr, uap->port.membase + UART010_CR); - } - - static void pl010_stop_rx(struct uart_port *port) -@@ -100,9 +99,9 @@ static void pl010_stop_rx(struct uart_po - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - -- cr = readb(uap->port.membase + UART010_CR); -+ cr = __raw_readl(uap->port.membase + UART010_CR); - cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); -- writel(cr, uap->port.membase + UART010_CR); -+ __raw_writel(cr, uap->port.membase + UART010_CR); - } - - static void pl010_enable_ms(struct uart_port *port) -@@ -110,9 +109,9 @@ static void pl010_enable_ms(struct uart_ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - -- cr = readb(uap->port.membase + UART010_CR); -+ cr = __raw_readl(uap->port.membase + UART010_CR); - cr |= UART010_CR_MSIE; -- writel(cr, uap->port.membase + UART010_CR); -+ __raw_writel(cr, uap->port.membase + UART010_CR); - } - - static void pl010_rx_chars(struct uart_amba_port *uap) -@@ -120,9 +119,9 @@ static void pl010_rx_chars(struct uart_a - struct tty_struct *tty = uap->port.info->port.tty; - unsigned int status, ch, flag, rsr, max_count = 256; - -- status = readb(uap->port.membase + UART01x_FR); -+ status = __raw_readl(uap->port.membase + UART01x_FR); - while (UART_RX_DATA(status) && max_count--) { -- ch = readb(uap->port.membase + UART01x_DR); -+ ch = __raw_readl(uap->port.membase + UART01x_DR); - flag = TTY_NORMAL; - - uap->port.icount.rx++; -@@ -131,9 +130,9 @@ static void pl010_rx_chars(struct uart_a - * Note that the error handling code is - * out of the main execution path - */ -- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; -+ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; - if (unlikely(rsr & UART01x_RSR_ANY)) { -- writel(0, uap->port.membase + UART01x_ECR); -+ __raw_writel(0, uap->port.membase + UART01x_ECR); - - if (rsr & UART01x_RSR_BE) { - rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); -@@ -163,7 +162,7 @@ static void pl010_rx_chars(struct uart_a - uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); - - ignore_char: -- status = readb(uap->port.membase + UART01x_FR); -+ status = __raw_readl(uap->port.membase + UART01x_FR); - } - spin_unlock(&uap->port.lock); - tty_flip_buffer_push(tty); -@@ -176,7 +175,7 @@ static void pl010_tx_chars(struct uart_a - int count; - - if (uap->port.x_char) { -- writel(uap->port.x_char, uap->port.membase + UART01x_DR); -+ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR); - uap->port.icount.tx++; - uap->port.x_char = 0; - return; -@@ -188,7 +187,7 @@ static void pl010_tx_chars(struct uart_a - - count = uap->port.fifosize >> 1; - do { -- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); -+ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uap->port.icount.tx++; - if (uart_circ_empty(xmit)) -@@ -206,9 +205,9 @@ static void pl010_modem_status(struct ua - { - unsigned int status, delta; - -- writel(0, uap->port.membase + UART010_ICR); -+ __raw_writel(0, uap->port.membase + UART010_ICR); - -- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; -+ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - delta = status ^ uap->old_status; - uap->old_status = status; -@@ -236,7 +235,7 @@ static irqreturn_t pl010_int(int irq, vo - - spin_lock(&uap->port.lock); - -- status = readb(uap->port.membase + UART010_IIR); -+ status = __raw_readl(uap->port.membase + UART010_IIR); - if (status) { - do { - if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) -@@ -249,7 +248,7 @@ static irqreturn_t pl010_int(int irq, vo - if (pass_counter-- == 0) - break; - -- status = readb(uap->port.membase + UART010_IIR); -+ status = __raw_readl(uap->port.membase + UART010_IIR); - } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | - UART010_IIR_TIS)); - handled = 1; -@@ -263,7 +262,7 @@ static irqreturn_t pl010_int(int irq, vo - static unsigned int pl010_tx_empty(struct uart_port *port) - { - struct uart_amba_port *uap = (struct uart_amba_port *)port; -- unsigned int status = readb(uap->port.membase + UART01x_FR); -+ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR); - return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; - } - -@@ -273,7 +272,7 @@ static unsigned int pl010_get_mctrl(stru - unsigned int result = 0; - unsigned int status; - -- status = readb(uap->port.membase + UART01x_FR); -+ status = __raw_readl(uap->port.membase + UART01x_FR); - if (status & UART01x_FR_DCD) - result |= TIOCM_CAR; - if (status & UART01x_FR_DSR) -@@ -299,12 +298,12 @@ static void pl010_break_ctl(struct uart_ - unsigned int lcr_h; - - spin_lock_irqsave(&uap->port.lock, flags); -- lcr_h = readb(uap->port.membase + UART010_LCRH); -+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH); - if (break_state == -1) - lcr_h |= UART01x_LCRH_BRK; - else - lcr_h &= ~UART01x_LCRH_BRK; -- writel(lcr_h, uap->port.membase + UART010_LCRH); -+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH); - spin_unlock_irqrestore(&uap->port.lock, flags); - } - -@@ -332,12 +331,12 @@ static int pl010_startup(struct uart_por - /* - * initialise the old status of the modem signals - */ -- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; -+ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - /* - * Finally, enable interrupts - */ -- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, -+ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, - uap->port.membase + UART010_CR); - - return 0; -@@ -360,10 +359,10 @@ static void pl010_shutdown(struct uart_p - /* - * disable all interrupts, disable the port - */ -- writel(0, uap->port.membase + UART010_CR); -+ __raw_writel(0, uap->port.membase + UART010_CR); - - /* disable break condition and fifos */ -- writel(readb(uap->port.membase + UART010_LCRH) & -+ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) & - ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), - uap->port.membase + UART010_LCRH); - -@@ -385,7 +384,7 @@ pl010_set_termios(struct uart_port *port - /* - * Ask the core to calculate the divisor for us. - */ -- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); -+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); - quot = uart_get_divisor(port, baud); - - switch (termios->c_cflag & CSIZE) { -@@ -448,25 +447,25 @@ pl010_set_termios(struct uart_port *port - uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; - - /* first, disable everything */ -- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; -+ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; - - if (UART_ENABLE_MS(port, termios->c_cflag)) - old_cr |= UART010_CR_MSIE; - -- writel(0, uap->port.membase + UART010_CR); -+ __raw_writel(0, uap->port.membase + UART010_CR); - - /* Set baud rate */ - quot -= 1; -- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); -- writel(quot & 0xff, uap->port.membase + UART010_LCRL); -+ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); -+ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL); - - /* - * ----------v----------v----------v----------v----- - * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L - * ----------^----------^----------^----------^----- - */ -- writel(lcr_h, uap->port.membase + UART010_LCRH); -- writel(old_cr, uap->port.membase + UART010_CR); -+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH); -+ __raw_writel(old_cr, uap->port.membase + UART010_CR); - - spin_unlock_irqrestore(&uap->port.lock, flags); - } -@@ -538,7 +537,7 @@ static struct uart_ops amba_pl010_pops = - .verify_port = pl010_verify_port, - }; - --static struct uart_amba_port *amba_ports[UART_NR]; -+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR]; - - #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE - -@@ -548,10 +547,10 @@ static void pl010_console_putchar(struct - unsigned int status; - - do { -- status = readb(uap->port.membase + UART01x_FR); -+ status = __raw_readl(uap->port.membase + UART01x_FR); - barrier(); - } while (!UART_TX_READY(status)); -- writel(ch, uap->port.membase + UART01x_DR); -+ __raw_writel(ch, uap->port.membase + UART01x_DR); - } - - static void -@@ -565,8 +564,8 @@ pl010_console_write(struct console *co, - /* - * First save the CR then disable the interrupts - */ -- old_cr = readb(uap->port.membase + UART010_CR); -- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); -+ old_cr = __raw_readl(uap->port.membase + UART010_CR); -+ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); - - uart_console_write(&uap->port, s, count, pl010_console_putchar); - -@@ -575,10 +574,10 @@ pl010_console_write(struct console *co, - * and restore the TCR - */ - do { -- status = readb(uap->port.membase + UART01x_FR); -+ status = __raw_readl(uap->port.membase + UART01x_FR); - barrier(); - } while (status & UART01x_FR_BUSY); -- writel(old_cr, uap->port.membase + UART010_CR); -+ __raw_writel(old_cr, uap->port.membase + UART010_CR); - - clk_disable(uap->clk); - } -@@ -587,9 +586,9 @@ static void __init - pl010_console_get_options(struct uart_amba_port *uap, int *baud, - int *parity, int *bits) - { -- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { -+ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { - unsigned int lcr_h, quot; -- lcr_h = readb(uap->port.membase + UART010_LCRH); -+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH); - - *parity = 'n'; - if (lcr_h & UART01x_LCRH_PEN) { -@@ -604,8 +603,8 @@ pl010_console_get_options(struct uart_am - else - *bits = 8; - -- quot = readb(uap->port.membase + UART010_LCRL) | -- readb(uap->port.membase + UART010_LCRM) << 8; -+ quot = __raw_readl(uap->port.membase + UART010_LCRL) | -+ __raw_readl(uap->port.membase + UART010_LCRM) << 8; - *baud = uap->port.uartclk / (16 * (quot + 1)); - } - } -@@ -623,7 +622,7 @@ static int __init pl010_console_setup(st - * if so, search for the first available port that does have - * console support. - */ -- if (co->index >= UART_NR) -+ if (co->index >= SERIAL_AMBA_NR) - co->index = 0; - uap = amba_ports[co->index]; - if (!uap) -@@ -641,7 +640,7 @@ static int __init pl010_console_setup(st - - static struct uart_driver amba_reg; - static struct console amba_console = { -- .name = "ttyAM", -+ .name = SERIAL_AMBA_NAME, - .write = pl010_console_write, - .device = uart_console_device, - .setup = pl010_console_setup, -@@ -657,11 +656,11 @@ static struct console amba_console = { - - static struct uart_driver amba_reg = { - .owner = THIS_MODULE, -- .driver_name = "ttyAM", -- .dev_name = "ttyAM", -+ .driver_name = SERIAL_AMBA_NAME, -+ .dev_name = SERIAL_AMBA_NAME, - .major = SERIAL_AMBA_MAJOR, - .minor = SERIAL_AMBA_MINOR, -- .nr = UART_NR, -+ .nr = SERIAL_AMBA_NR, - .cons = AMBA_CONSOLE, - }; - ---- a/drivers/serial/Kconfig -+++ b/drivers/serial/Kconfig -@@ -284,10 +284,25 @@ config SERIAL_AMBA_PL010 - help - This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have - an Integrator/AP or Integrator/PP2 platform, or if you have a -- Cirrus Logic EP93xx CPU, say Y or M here. -+ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here. - - If unsure, say N. - -+config SERIAL_AMBA_PL010_NUMPORTS -+ int "Maximum number of AMBA PL010 serial ports" -+ depends on SERIAL_AMBA_PL010 -+ default "8" -+ ---help--- -+ Set this to the number of serial ports you want the AMBA PL010 driver -+ to support. -+ -+config SERIAL_AMBA_PL010_PORTNAME -+ string "Name of the AMBA PL010 serial ports" -+ depends on SERIAL_AMBA_PL010 -+ default "ttyAM" -+ ---help--- -+ ::: To be written ::: -+ - config SERIAL_AMBA_PL010_CONSOLE - bool "Support for console on AMBA serial port" - depends on SERIAL_AMBA_PL010=y diff --git a/target/linux/adm5120/patches-2.6.30/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.30/201-amba_bus_hacks.patch deleted file mode 100644 index 9db3e55adb..0000000000 --- a/target/linux/adm5120/patches-2.6.30/201-amba_bus_hacks.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/amba/bus.c -+++ b/drivers/amba/bus.c -@@ -18,6 +18,10 @@ - #include - #include - -+#ifndef NO_IRQ -+#define NO_IRQ (-1) -+#endif -+ - #define to_amba_device(d) container_of(d, struct amba_device, dev) - #define to_amba_driver(d) container_of(d, struct amba_driver, drv) - diff --git a/target/linux/adm5120/patches-2.6.30/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.30/203-gpio_leds_brightness.patch deleted file mode 100644 index 8bccf395c1..0000000000 --- a/target/linux/adm5120/patches-2.6.30/203-gpio_leds_brightness.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/leds/leds-gpio.c -+++ b/drivers/leds/leds-gpio.c -@@ -44,13 +44,17 @@ static void gpio_led_set(struct led_clas - container_of(led_cdev, struct gpio_led_data, cdev); - int level; - -- if (value == LED_OFF) -- level = 0; -- else -- level = 1; -- -- if (led_dat->active_low) -- level = !level; -+ switch (value) { -+ case LED_OFF: -+ level = led_dat->active_low ? 1 : 0; -+ break; -+ case LED_FULL: -+ level = led_dat->active_low ? 0 : 1; -+ break; -+ default: -+ level = value; -+ break; -+ } - - /* Setting GPIOs with I2C/etc requires a task context, and we don't - * seem to have a reliable way to know if we're already in one; so diff --git a/target/linux/adm5120/patches-2.6.30/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.30/310-adm5120_wdt.patch deleted file mode 100644 index bb5e613d95..0000000000 --- a/target/linux/adm5120/patches-2.6.30/310-adm5120_wdt.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -713,6 +713,18 @@ config RC32434_WDT - To compile this driver as a module, choose M here: the - module will be called rc32434_wdt. - -+config ADM5120_WDT -+ tristate "Infineon ADM5120 SoC hardware watchdog" -+ depends on WATCHDOG && ADM5120 -+ help -+ This is a driver for hardware watchdog integrated in Infineon -+ ADM5120 SoC. This watchdog simply watches your kernel to make sure -+ it doesn't freeze, and if it does, it reboots your computer after a -+ certain amount of time. -+ -+ To compile this driver as a module, choose M here: the module will be -+ called adm5120_wdt. -+ - config INDYDOG - tristate "Indy/I2 Hardware Watchdog" - depends on SGI_HAS_INDYDOG ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -105,6 +105,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o -+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o - - # PARISC Architecture - diff --git a/target/linux/adm5120/router_be/config-2.6.30 b/target/linux/adm5120/router_be/config-2.6.30 deleted file mode 100644 index cde882d2e4..0000000000 --- a/target/linux/adm5120/router_be/config-2.6.30 +++ /dev/null @@ -1,205 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_ADM5120=y -CONFIG_ADM5120_ENET=y -CONFIG_ADM5120_MACH_5GXI=y -CONFIG_ADM5120_MACH_P_334WT=y -CONFIG_ADM5120_MACH_P_335=y -# CONFIG_ADM5120_OEM_CELLVISION is not set -# CONFIG_ADM5120_OEM_COMPEX is not set -# CONFIG_ADM5120_OEM_EDIMAX is not set -# CONFIG_ADM5120_OEM_INFINEON is not set -# CONFIG_ADM5120_OEM_MIKROTIK is not set -# CONFIG_ADM5120_OEM_MOTOROLA is not set -CONFIG_ADM5120_OEM_OSBRIDGE=y -CONFIG_ADM5120_OEM_ZYXEL=y -CONFIG_ADM5120_SOC_BGA=y -CONFIG_ADM5120_WDT=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM_AMBA=y -# CONFIG_BCM47XX is not set -# CONFIG_BINARY_PRINTF is not set -CONFIG_BINFMT_MISC=m -CONFIG_BITREVERSE=y -# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set -# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2" -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_CAVIUM_OCTEON is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_ACL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_IDE=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HID=m -CONFIG_HID_SUPPORT=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_INPUT=m -# CONFIG_INPUT_GPIO_BUTTONS is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_IRQ_CPU=y -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MII=m -# CONFIG_MIKROTIK_RB532 is not set -CONFIG_MIPS=y -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_MACHINE=y -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MTD_ADM5120=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_TRXSPLIT=y -# CONFIG_NET_PCI is not set -# CONFIG_NO_IOPORT is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -CONFIG_PAGEFLAGS_EXTENDED=y -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_PCI=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PROBE_INITRD_HEADER is not set -CONFIG_SCHED_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_AMBA_PL010=y -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y -CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 -CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" -# CONFIG_SERIAL_AMBA_PL011 is not set -CONFIG_SERIO=y -# CONFIG_SERIO_AMBAKMI is not set -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SLAB is not set -# CONFIG_SLOW_WORK is not set -CONFIG_SLUB=y -CONFIG_SOFT_WATCHDOG=m -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TRACING_SUPPORT=y -CONFIG_TRAD_SIGNALS=y -CONFIG_USB=m -CONFIG_USB_ADM5120_HCD=m -CONFIG_USB_DEBUG=y -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_SUPPORT=y -# CONFIG_USB_UHCI_HCD is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/adm5120/router_le/config-2.6.30 b/target/linux/adm5120/router_le/config-2.6.30 deleted file mode 100644 index ead803f934..0000000000 --- a/target/linux/adm5120/router_le/config-2.6.30 +++ /dev/null @@ -1,260 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_ADM5120=y -CONFIG_ADM5120_ENET=y -CONFIG_ADM5120_MACH_5GXI=y -CONFIG_ADM5120_MACH_BR_6104K=y -CONFIG_ADM5120_MACH_BR_6104KP=y -CONFIG_ADM5120_MACH_BR_61X4WG=y -CONFIG_ADM5120_MACH_CAS_771=y -CONFIG_ADM5120_MACH_EASY5120P_ATA=y -CONFIG_ADM5120_MACH_EASY5120_RT=y -CONFIG_ADM5120_MACH_EASY5120_WVOIP=y -CONFIG_ADM5120_MACH_EASY83000=y -CONFIG_ADM5120_MACH_NFS_101=y -CONFIG_ADM5120_MACH_NP27G=y -CONFIG_ADM5120_MACH_NP28G=y -CONFIG_ADM5120_MACH_PMUGW=y -CONFIG_ADM5120_MACH_RB_11X=y -CONFIG_ADM5120_MACH_RB_133=y -CONFIG_ADM5120_MACH_RB_133C=y -CONFIG_ADM5120_MACH_RB_150=y -CONFIG_ADM5120_MACH_RB_153=y -CONFIG_ADM5120_MACH_RB_192=y -CONFIG_ADM5120_MACH_WP54=y -CONFIG_ADM5120_OEM_CELLVISION=y -CONFIG_ADM5120_OEM_COMPEX=y -CONFIG_ADM5120_OEM_EDIMAX=y -CONFIG_ADM5120_OEM_INFINEON=y -CONFIG_ADM5120_OEM_MIKROTIK=y -CONFIG_ADM5120_OEM_MOTOROLA=y -CONFIG_ADM5120_OEM_OSBRIDGE=y -# CONFIG_ADM5120_OEM_ZYXEL is not set -CONFIG_ADM5120_SOC_BGA=y -CONFIG_ADM5120_WDT=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM_AMBA=y -CONFIG_ATA=m -# CONFIG_BCM47XX is not set -# CONFIG_BINARY_PRINTF is not set -CONFIG_BITREVERSE=y -# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set -# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2" -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_CAVIUM_OCTEON is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_ACL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HAMRADIO is not set -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_IDE=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HID=m -CONFIG_HID_SUPPORT=y -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_PCI=m -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_INPUT=m -# CONFIG_INPUT_GPIO_BUTTONS is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_IRQ_CPU=y -CONFIG_KEXEC=y -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGER_ADM5120_SWITCH=m -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_LEMOTE_FULONG is not set -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -CONFIG_LIB80211_CRYPT_WEP=m -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MII=m -# CONFIG_MIKROTIK_RB532 is not set -CONFIG_MIPS=y -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_MACHINE=y -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MTD_ADM5120=y -CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_MYLOADER_PARTS=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_MTD_TRXSPLIT=y -CONFIG_NO_HZ=y -# CONFIG_NO_IOPORT is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -CONFIG_PAGEFLAGS_EXTENDED=y -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_PCI=y -CONFIG_PATA_RB153_CF=m -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PROBE_INITRD_HEADER is not set -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_SCSI=m -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_AMBA_PL010=y -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y -CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 -CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" -# CONFIG_SERIAL_AMBA_PL011 is not set -CONFIG_SERIO=y -# CONFIG_SERIO_AMBAKMI is not set -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SLAB is not set -# CONFIG_SLOW_WORK is not set -CONFIG_SLUB=y -CONFIG_SOFT_WATCHDOG=m -# CONFIG_SWAP is not set -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -# CONFIG_TC35815 is not set -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TRACING_SUPPORT=y -CONFIG_TRAD_SIGNALS=y -CONFIG_USB=m -CONFIG_USB_ADM5120_HCD=m -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_SUPPORT=y -# CONFIG_USB_UHCI_HCD is not set -CONFIG_VLAN_8021Q=m -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_YAFFS_9BYTE_TAGS=y -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -CONFIG_YAFFS_FS=y -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -CONFIG_YAFFS_YAFFS1=y -CONFIG_YAFFS_YAFFS2=y -CONFIG_ZONE_DMA_FLAG=0