From: Petr Štetiar Date: Mon, 5 Jun 2023 10:13:04 +0000 (+0200) Subject: ipq807x: add initial support for prpl Foundation Haze board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2e910039dd7170fd28641e7686c376dba6f0d8a5;p=openwrt%2Fstaging%2Fstintel.git ipq807x: add initial support for prpl Foundation Haze board Haze is prpl Foundation's reference board (WNC LVRP). Board info: - IPQ8072A SoC - 2 GiB RAM - 4 GiB eMMC - 8MiB SPI NOR (MX25U6435F) - 3x 1GigE ports (QCA8075) - 1x 10GigE port (AQR113C) - 1x SFP cage - WiFi 6GHz 160MHz (QCN9074) - WiFi 5GHz 80+80MHz (QCN5054) - WiFi 2.4G (QCN5024) - ARM Standard 20-pin 2.54mm/0.1" JTAG (1V8 !!!) - Bluetooth v5.0 + EDR with integrated Class 1 PA (CYW20704) - 1x M.2 B-key socket with PCIe 3.0 - 1x USB 3.0 port - UART marked J6 is 4-pin 2.54mm/0.1" connector 3V3(arrow),RX,TX,GND (115200 8N1) - Reset and WPS buttons Flashing instructions: 1. From U-Boot boot OpenWrt using initramfs image: IPQ807x# tftpboot openwrt-ipq807x-generic-prpl_haze-initramfs-uImage.itb && bootm 2. In OpenWrt running from initramfs execute sysupgrade: root@OpenWrt:/# sysupgrade -n /tmp/openwrt-ipq807x-generic-prpl_haze-squashfs-sysupgrade.bin Work in progress/known issues: * SFP feature not implemented/tested * M.2 feature not implemented/tested * Bluetooth feature not implemented/tested * 6GHz wireless should be working, but not tested * MAC address assigments for LAN interfaces Signed-off-by: Petr Štetiar --- diff --git a/package/boot/uboot-envtools/files/ipq807x b/package/boot/uboot-envtools/files/ipq807x index 0185c2c8e6..345cdadebe 100644 --- a/package/boot/uboot-envtools/files/ipq807x +++ b/package/boot/uboot-envtools/files/ipq807x @@ -36,6 +36,11 @@ xiaomi,ax9000) [ -n "$idx2" ] && \ ubootenv_add_uci_sys_config "/dev/mtd$idx2" "0x0" "0x10000" "0x20000" ;; +prpl,haze) + mmcpart="$(find_mmc_part 0:APPSBLENV)" + [ -n "$mmcpart" ] && \ + ubootenv_add_uci_config "$mmcpart" "0x0" "0x40000" "0x400" "0x100" + ;; qnap,301w) idx="$(find_mtd_index 0:appsblenv)" [ -n "$idx" ] && \ diff --git a/target/linux/ipq807x/base-files/etc/board.d/02_network b/target/linux/ipq807x/base-files/etc/board.d/02_network index edd1e131b6..8175a99f97 100644 --- a/target/linux/ipq807x/base-files/etc/board.d/02_network +++ b/target/linux/ipq807x/base-files/etc/board.d/02_network @@ -25,6 +25,9 @@ ipq807x_setup_interfaces() netgear,wax218) ucidef_set_interface_lan "lan" "dhcp" ;; + prpl,haze) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan" + ;; qnap,301w) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1" ;; diff --git a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata index ddb0737d20..f9315573ec 100644 --- a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata +++ b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata @@ -22,10 +22,17 @@ case "$FIRMWARE" in zyxel,nbg7815) caldata_extract "0:art" 0x1000 0x20000 ;; + prpl,haze) + caldata_extract_mmc "0:ART" 0x1000 0x20000 + ;; esac ;; -"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin") +"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin"|\ +"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin") case "$board" in + prpl,haze) + caldata_extract_mmc "0:ART" 0x26800 0x20000 + ;; xiaomi,ax9000) caldata_extract "0:art" 0x26800 0x20000 ;; diff --git a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh index f7c4772315..458eb16b79 100644 --- a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh @@ -71,6 +71,7 @@ platform_do_upgrade() { netgear,wax218) nand_do_upgrade "$1" ;; + prpl,haze|\ qnap,301w) kernelname="0:HLOS" rootfsname="rootfs" diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts new file mode 100644 index 0000000000..8a5200b4eb --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "ipq8074.dtsi" +#include "ipq8074-hk-cpu.dtsi" +#include "ipq8074-ess.dtsi" +#include +#include +#include + +/ { + model = "prpl Foundation Haze"; + compatible = "prpl,haze", "qcom,ipq8074"; + + aliases { + serial0 = &blsp1_uart5; + /* Aliases are required by U-Boot to patch MAC addresses */ + ethernet0 = &dp6_syn; + ethernet1 = &dp4; + ethernet2 = &dp3; + ethernet3 = &dp2; + label-mac-device = &dp6_syn; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wps-button { + label = "wps"; + gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset-button { + label = "reset"; + gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&tlmm { + mdio_pins: mdio-state { + mdc-pins { + pins = "gpio68"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio69"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + button_pins: button-state { + wps-pins { + pins = "gpio42"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + rst-pins { + pins = "gpio44"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; + +&blsp1_uart5 { + status = "okay"; +}; + +&prng { + status = "okay"; +}; + +&ssphy_0 { + status = "okay"; +}; + +&qusb_phy_0 { + status = "okay"; +}; + +&ssphy_1 { + status = "okay"; +}; + +&qusb_phy_1 { + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&blsp1_spi1 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + cs-gpios = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + + partitions { + compatible = "qcom,smem-part"; + }; + }; +}; + +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; + + qca8075_1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + qca8075_2: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + + qca8075_3: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + }; + + qca8075_4: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + }; + + aqr113c: ethernet-phy@5 { + compatible ="ethernet-phy-ieee802.3-c45"; + reg = <8>; + reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; + }; +}; + +&sdhc_1 { + status = "okay"; + + vqmmc-supply = <&l11>; +}; + +&switch { + status = "okay"; + + switch_cpu_bmp = <0x1>; /* cpu port bitmap */ + switch_lan_bmp = <0x1e>; /* lan port bitmap */ + switch_wan_bmp = <0x60>; /* wan port bitmap */ + switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/ + switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1*/ + switch_mac_mode2 = <0xd>; /* mac mode for uniphy instance2*/ + bm_tick_mode = <0>; /* bm tick mode */ + tm_tick_mode = <0>; /* tm tick mode */ + + qcom,port_phyinfo { + port@0 { + port_id = <1>; + phy_address = <0>; + }; + port@1 { + port_id = <2>; + phy_address = <1>; + }; + port@2 { + port_id = <3>; + phy_address = <2>; + }; + port@3 { + port_id = <4>; + phy_address = <3>; + }; + port@4 { + port_id = <6>; + phy_address = <8>; + compatible = "ethernet-phy-ieee802.3-c45"; + ethernet-phy-ieee802.3-c45; + }; + }; +}; + +&edma { + status = "okay"; +}; + +/* Dummy LAN port */ +&dp1 { + status = "disabled"; + phy-handle = <&qca8075_1>; + label = "lan4"; +}; + +&dp2 { + status = "okay"; + phy-handle = <&qca8075_2>; + label = "lan3"; +}; + +&dp3 { + status = "okay"; + phy-handle = <&qca8075_3>; + label = "lan2"; +}; + +&dp4 { + status = "okay"; + phy-handle = <&qca8075_4>; + label = "lan1"; +}; + +&dp6_syn { + status = "okay"; + qcom,mactype = <1>; + phy-handle = <&aqr113c>; + label = "wan"; +}; + +&pcie_qmp0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; + + perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00020000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; +}; + +&pcie_qmp1 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; + + perst-gpio = <&tlmm 61 GPIO_ACTIVE_LOW>; + + bridge@1,0 { + reg = <0x00010000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@1,0 { + status = "okay"; + + /* ath11k has no DT compatible for PCI cards */ + compatible = "pci17cb,1104"; + reg = <0x00010000 0 0 0 0>; + + qcom,ath11k-calibration-variant = "prpl-Haze"; + }; + }; +}; + +&wifi { + status = "okay"; + + qcom,ath11k-calibration-variant = "prpl-Haze"; +}; diff --git a/target/linux/ipq807x/image/generic.mk b/target/linux/ipq807x/image/generic.mk index 1ea42845f0..039fa3b1ad 100644 --- a/target/linux/ipq807x/image/generic.mk +++ b/target/linux/ipq807x/image/generic.mk @@ -108,6 +108,17 @@ define Device/netgear_wax218 endef TARGET_DEVICES += netgear_wax218 +define Device/prpl_haze + $(call Device/FitImage) + $(call Device/EmmcImage) + DEVICE_VENDOR := prpl Foundation + DEVICE_MODEL := Haze + DEVICE_DTS_CONFIG := config@hk09 + SOC := ipq8072 + DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci +endef +TARGET_DEVICES += prpl_haze + define Device/qnap_301w $(call Device/FitImage) $(call Device/EmmcImage)