From: Florian Fainelli Date: Sun, 1 Aug 2010 12:41:16 +0000 (+0000) Subject: add 2.6.34 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2df3583611a5117284183825c4011f3d3c4416ec;p=openwrt%2Fstaging%2Fluka.git add 2.6.34 support SVN-Revision: 22452 --- diff --git a/target/linux/octeon/config-2.6.34 b/target/linux/octeon/config-2.6.34 new file mode 100644 index 0000000000..797e9e1464 --- /dev/null +++ b/target/linux/octeon/config-2.6.34 @@ -0,0 +1,239 @@ +# CONFIG_32BIT is not set +CONFIG_64BIT=y +CONFIG_64BIT_PHYS_ADDR=y +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_AR7 is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SUPPORTS_MSI=y +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ARPD is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set +CONFIG_BINFMT_ELF32=y +CONFIG_BITREVERSE=y +CONFIG_BLOCK_COMPAT=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_CAVIUM_OCTEON_2ND_KERNEL is not set +CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE=2 +CONFIG_CAVIUM_OCTEON_HW_FIX_UNALIGNED=y +CONFIG_CAVIUM_OCTEON_LOCK_L2=y +CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION=y +CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT=y +CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT=y +CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY=y +CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB=y +CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD=y +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +CONFIG_CAVIUM_OCTEON_SPECIFIC_OPTIONS=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_COMPAT=y +CONFIG_COMPAT_BRK=y +CONFIG_COMPAT_NETLINK_MESSAGES=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_CAVIUM_OCTEON=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR2=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CPU_SUPPORTS_HUGEPAGES=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +CONFIG_CRAMFS=y +# CONFIG_CRYPTO_PCRYPT is not set +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_DEVKMEM=y +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +CONFIG_DMA_COHERENT=y +CONFIG_DNOTIFY=y +CONFIG_EARLY_PRINTK=y +CONFIG_ELF_CORE=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_FRAME_WARN=2048 +# CONFIG_FW_LOADER is not set +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +# CONFIG_HAMRADIO is not set +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_HUGETLBFS is not set +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_OCTEON=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_CPU_OCTEON=y +CONFIG_IRQ_PER_CPU=y +CONFIG_KALLSYMS=y +CONFIG_KEXEC=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_LOCK_KERNEL=y +CONFIG_LOONGSON_UART_BASE=y +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_LOONGSON is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MACH_VR41XX is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MDIO_OCTEON=y +# CONFIG_MIKROTIK_RB532 is not set +CONFIG_MIPS=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_N32=y +CONFIG_MIPS32_O32=y +# CONFIG_MIPS_COBALT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=7 +# CONFIG_MIPS_MACHINE is not set +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_MIPS_PGD_C0_CONTEXT=y +# CONFIG_MIPS_SIM is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +# CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_NO_IOPORT is not set +CONFIG_NR_CPUS=16 +CONFIG_NR_CPUS_DEFAULT_16=y +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +CONFIG_OCTEON_ETHERNET=y +CONFIG_OCTEON_MGMT_ETHERNET=y +CONFIG_PAGEFLAGS_EXTENDED=y +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PHYLIB=y +CONFIG_PHYS_ADDR_T_64BIT=y +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_POWERTV is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_RELAY=y +CONFIG_SCHED_DEBUG=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +# CONFIG_SCSI_DMA is not set +CONFIG_SCSI_MOD=y +CONFIG_SECCOMP=y +# CONFIG_SERIAL_8250_EXTENDED is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +CONFIG_SMP=y +CONFIG_SPARSEMEM=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=999999 +CONFIG_STOP_MACHINE=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_SYS_HAS_CPU_CAVIUM_OCTEON=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_HIGHMEM=y +CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_SYS_SUPPORTS_SMP=y +# CONFIG_TC35815 is not set +# CONFIG_TINY_RCU is not set +CONFIG_TREE_RCU=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_VLAN_8021Q is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_WEAK_ORDERING=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/octeon/patches-2.6.34/001-wndap330_hacks.patch b/target/linux/octeon/patches-2.6.34/001-wndap330_hacks.patch new file mode 100644 index 0000000000..63f407d284 --- /dev/null +++ b/target/linux/octeon/patches-2.6.34/001-wndap330_hacks.patch @@ -0,0 +1,77 @@ +--- a/drivers/staging/octeon/cvmx-helper-board.c ++++ b/drivers/staging/octeon/cvmx-helper-board.c +@@ -90,7 +90,7 @@ int cvmx_helper_board_get_mii_address(in + case CVMX_BOARD_TYPE_KODAMA: + case CVMX_BOARD_TYPE_EBH3100: + case CVMX_BOARD_TYPE_HIKARI: +- case CVMX_BOARD_TYPE_CN3010_EVB_HS5: ++ //case CVMX_BOARD_TYPE_CN3010_EVB_HS5: /* hack for the WNDAP330 */ + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + case CVMX_BOARD_TYPE_CN3020_EVB_HS5: + /* +@@ -103,6 +103,12 @@ int cvmx_helper_board_get_mii_address(in + return 9; + else + return -1; ++ case CVMX_BOARD_TYPE_CN3010_EVB_HS5: /* hack for the WNDAP330 */ ++ /* We have only one port, using GMII */ ++ if (ipd_port == 0) ++ return 9; ++ else ++ return -1; + case CVMX_BOARD_TYPE_NAC38: + /* Board has 8 RGMII ports PHYs are 0-7 */ + if ((ipd_port >= 0) && (ipd_port < 4)) +@@ -213,7 +219,7 @@ cvmx_helper_link_info_t __cvmx_helper_bo + result.s.speed = 1000; + return result; + case CVMX_BOARD_TYPE_EBH3100: +- case CVMX_BOARD_TYPE_CN3010_EVB_HS5: ++ //case CVMX_BOARD_TYPE_CN3010_EVB_HS5: /* hack for the WNDAP330 */ + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + case CVMX_BOARD_TYPE_CN3020_EVB_HS5: + /* Port 1 on these boards is always Gigabit */ +@@ -225,6 +231,9 @@ cvmx_helper_link_info_t __cvmx_helper_bo + } + /* Fall through to the generic code below */ + break; ++ case CVMX_BOARD_TYPE_CN3010_EVB_HS5: /* hack for the WNDAP330 */ ++ is_broadcom_phy = 1; ++ break; + case CVMX_BOARD_TYPE_CUST_NB5: + /* Port 1 on these boards is always Gigabit */ + if (ipd_port == 1) { +--- a/drivers/staging/octeon/cvmx-helper-rgmii.c ++++ b/drivers/staging/octeon/cvmx-helper-rgmii.c +@@ -66,13 +66,15 @@ int __cvmx_helper_rgmii_probe(int interf + cvmx_dprintf("ERROR: RGMII initialize called in " + "SPI interface\n"); + } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) +- || OCTEON_IS_MODEL(OCTEON_CN30XX) ++ //|| OCTEON_IS_MODEL(OCTEON_CN30XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* + * On these chips "type" says we're in + * GMII/MII mode. This limits us to 2 ports + */ + num_ports = 2; ++ } else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) { ++ num_ports = 1; + } else { + cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n", + __func__); +--- a/arch/mips/pci/pci-octeon.c ++++ b/arch/mips/pci/pci-octeon.c +@@ -210,9 +210,11 @@ const char *octeon_get_pci_interrupts(vo + /* This is really the NAC38 */ + return "AAAAADABAAAAAAAAAAAAAAAAAAAAAAAA"; + case CVMX_BOARD_TYPE_EBH3100: +- case CVMX_BOARD_TYPE_CN3010_EVB_HS5: ++ //case CVMX_BOARD_TYPE_CN3010_EVB_HS5: + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA"; ++ case CVMX_BOARD_TYPE_CN3010_EVB_HS5: ++ return "AAAAAAAAAAAAAABAAAAAAAAAAAAAAABA"; + case CVMX_BOARD_TYPE_BBGW_REF: + return "AABCD"; + case CVMX_BOARD_TYPE_THUNDER: diff --git a/target/linux/octeon/patches-2.6.34/002-nb5_fixup.patch b/target/linux/octeon/patches-2.6.34/002-nb5_fixup.patch new file mode 100644 index 0000000000..1d3641a73f --- /dev/null +++ b/target/linux/octeon/patches-2.6.34/002-nb5_fixup.patch @@ -0,0 +1,21 @@ +--- a/arch/mips/pci/pci-octeon.c ++++ b/arch/mips/pci/pci-octeon.c +@@ -217,6 +217,8 @@ const char *octeon_get_pci_interrupts(vo + return "AAAAAAAAAAAAAABAAAAAAAAAAAAAAABA"; + case CVMX_BOARD_TYPE_BBGW_REF: + return "AABCD"; ++ case CVMX_BOARD_TYPE_CUST_NB5: ++ return "ABDABAAAAAAAAAAAAAAAAAAAAAAAAAAA"; + case CVMX_BOARD_TYPE_THUNDER: + case CVMX_BOARD_TYPE_EBH3000: + default: +--- a/drivers/staging/octeon/cvmx-helper-board.c ++++ b/drivers/staging/octeon/cvmx-helper-board.c +@@ -707,6 +707,7 @@ cvmx_helper_board_usb_clock_types_t __cv + { + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_BBGW_REF: ++ case CVMX_BOARD_TYPE_CUST_NB5: + return USB_CLOCK_TYPE_CRYSTAL_12; + } + return USB_CLOCK_TYPE_REF_48; diff --git a/target/linux/octeon/patches-2.6.34/003-sched_clock_no_gcc44x_inline.patch b/target/linux/octeon/patches-2.6.34/003-sched_clock_no_gcc44x_inline.patch new file mode 100644 index 0000000000..2920de260e --- /dev/null +++ b/target/linux/octeon/patches-2.6.34/003-sched_clock_no_gcc44x_inline.patch @@ -0,0 +1,40 @@ +When building with a toolchain that is configured to produce 32-bits executable +by default, we will produce __lshrti3 in sched_clock() which is never resolved +so the kernel fails to link. Unconditionally use the inline assemble version +as suggested by David Daney, which works around the issue. + +CC: David Daney +Signed-off-by: Florian Fainelli +--- + arch/mips/cavium-octeon/csrc-octeon.c | 8 -------- + 1 files changed, 0 insertions(+), 8 deletions(-) + +diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c +index 0bf4bbe..36400d2 100644 +--- a/arch/mips/cavium-octeon/csrc-octeon.c ++++ b/arch/mips/cavium-octeon/csrc-octeon.c +@@ -53,7 +53,6 @@ static struct clocksource clocksource_mips = { + unsigned long long notrace sched_clock(void) + { + /* 64-bit arithmatic can overflow, so use 128-bit. */ +-#if (__GNUC__ < 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ <= 3)) + u64 t1, t2, t3; + unsigned long long rv; + u64 mult = clocksource_mips.mult; +@@ -73,13 +72,6 @@ unsigned long long notrace sched_clock(void) + : [cnt] "r" (cnt), [mult] "r" (mult), [shift] "r" (shift) + : "hi", "lo"); + return rv; +-#else +- /* GCC > 4.3 do it the easy way. */ +- unsigned int __attribute__((mode(TI))) t; +- t = read_c0_cvmcount(); +- t = t * clocksource_mips.mult; +- return (unsigned long long)(t >> clocksource_mips.shift); +-#endif + } + + void __init plat_time_init(void) +-- +1.7.1 +