From: Mathias Kresin Date: Wed, 12 Apr 2017 05:53:56 +0000 (+0200) Subject: ramips: add ZBT-WE826 32MB variant X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2ddaf96a77a92186447ca18935b8a36d46d3db95;p=openwrt%2Fstaging%2Fthess.git ramips: add ZBT-WE826 32MB variant The ZBT-WG826 is available with 16 or 32 MByte of flash. Split the device tree source file, rename the currently supported 16 MByte version and add the 32 MByte variant. Signed-off-by: Mathias Kresin --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 213f2edc26..d11d9c3df8 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -395,10 +395,11 @@ zbt-wa05) zbt-we2026) set_wifi_led "$board:green:wlan" ;; -zbt-we826) - ucidef_set_led_default "power" "power" "$board:green:power" "1" - set_wifi_led "$board:green:wifi" - set_usb_led "$board:green:usb" +zbt-we826-16M|\ +zbt-we826-32M) + ucidef_set_led_default "power" "power" "zbt-we826:green:power" "1" + set_wifi_led "zbt-we826:green:wifi" + set_usb_led "zbt-we826:green:usb" ;; zbt-wr8305rt) ucidef_set_led_default "power" "power" "$board:green:sys" "1" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 016d293cf8..80a3bc2c51 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -112,7 +112,8 @@ ramips_setup_interfaces() youku-yk1|\ zbt-ape522ii|\ zbt-we1326|\ - zbt-we826|\ + zbt-we826-16M|\ + zbt-we826-32M|\ zbt-wg2626|\ zbt-wg3526-16M|\ zbt-wg3526-32M|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 8b5e260f1f..f2aca340dd 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -189,8 +189,7 @@ get_status_led() { status_led="$board:amber:system" ;; oy-0001|\ - sl-r7205|\ - zbt-we826) + sl-r7205) status_led="$board:green:wifi" ;; psr-680w) @@ -273,6 +272,10 @@ get_status_led() { zbt-cpe102) status_led="$board:green:4g-0" ;; + zbt-we826-16M|\ + zbt-we826-32M) + status_led="zbt-we826:green:wifi" + ;; zbt-wg3526-16M|\ zbt-wg3526-32M) status_led="zbt-wg3526:green:status" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 3342a8f0c4..87cb7ffb91 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -652,8 +652,11 @@ ramips_board_detect() { *"ZBT-WE2026") name="zbt-we2026" ;; - *"ZBT-WE826") - name="zbt-we826" + *"ZBT-WE826 (16M)") + name="zbt-we826-16M" + ;; + *"ZBT-WE826 (32M)") + name="zbt-we826-32M" ;; *"ZBT-WG2626") name="zbt-wg2626" diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 8c7f9591ce..adad8dae75 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -193,7 +193,8 @@ platform_check_image() { zbt-wa05|\ zbt-we1326|\ zbt-we2026|\ - zbt-we826|\ + zbt-we826-16M|\ + zbt-we826-32M|\ zbt-wg2626|\ zbt-wg3526-16M|\ zbt-wg3526-32M|\ diff --git a/target/linux/ramips/dts/ZBT-WE826-16M.dts b/target/linux/ramips/dts/ZBT-WE826-16M.dts new file mode 100644 index 0000000000..de3c4c135d --- /dev/null +++ b/target/linux/ramips/dts/ZBT-WE826-16M.dts @@ -0,0 +1,12 @@ +/dts-v1/; + +#include "ZBT-WG3526.dtsi" + +/ { + compatible = "zbtlink,zbt-we826-16m", "zbtlink,zbt-we826", "ralink,mt7620a-soc"; + model = "ZBT-WE826 (16M)"; +}; + +&firmware { + reg = <0x50000 0xfb0000>; +}; \ No newline at end of file diff --git a/target/linux/ramips/dts/ZBT-WE826-32M.dts b/target/linux/ramips/dts/ZBT-WE826-32M.dts new file mode 100644 index 0000000000..c8383cbb64 --- /dev/null +++ b/target/linux/ramips/dts/ZBT-WE826-32M.dts @@ -0,0 +1,12 @@ +/dts-v1/; + +#include "ZBT-WG3526.dtsi" + +/ { + compatible = "zbtlink,zbt-we826-32m", "zbtlink,zbt-we826", "ralink,mt7620a-soc"; + model = "ZBT-WE826 (32M)"; +}; + +&firmware { + reg = <0x50000 0x1fb0000>; +}; \ No newline at end of file diff --git a/target/linux/ramips/dts/ZBT-WE826.dts b/target/linux/ramips/dts/ZBT-WE826.dts deleted file mode 100644 index 8a453bca32..0000000000 --- a/target/linux/ramips/dts/ZBT-WE826.dts +++ /dev/null @@ -1,123 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include - -/ { - compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc"; - model = "ZBT-WE826"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - gpio-leds { - compatible = "gpio-leds"; - power { - label = "zbt-we826:green:power"; - gpios = <&gpio1 14 0>; - }; - usb { - label = "zbt-we826:green:usb"; - gpios = <&gpio1 15 0>; - }; - air { - label = "zbt-we826:green:wifi"; - gpios = <&gpio3 0 1>; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <20>; - reset { - label = "reset"; - gpios = <&gpio0 1 1>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio3 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - en25q128@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; -}; - -&sdhci { - status = "okay"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; - -ðernet { - mtd-mac-address = <&factory 0x4>; - mediatek,portmap = "wllll"; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa"; - ralink,function = "gpio"; - }; - }; -}; - -&pcie { - status = "okay"; -}; diff --git a/target/linux/ramips/dts/ZBT-WE826.dtsi b/target/linux/ramips/dts/ZBT-WE826.dtsi new file mode 100644 index 0000000000..62ea4195a8 --- /dev/null +++ b/target/linux/ramips/dts/ZBT-WE826.dtsi @@ -0,0 +1,119 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include + +/ { + chosen { + bootargs = "console=ttyS0,115200"; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "zbt-we826:green:power"; + gpios = <&gpio1 14 0>; + }; + usb { + label = "zbt-we826:green:usb"; + gpios = <&gpio1 15 0>; + }; + air { + label = "zbt-we826:green:wifi"; + gpios = <&gpio3 0 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 1 1>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + en25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + firmware: partition@50000 { + label = "firmware"; + }; + }; +}; + +&sdhci { + status = "okay"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "wllll"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 83c9a7f0a0..71b651cda6 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -484,13 +484,22 @@ define Device/zbt-we2026 endef TARGET_DEVICES += zbt-we2026 -define Device/zbt-we826 - DTS := ZBT-WE826 +define Device/zbt-we826-16M + DTS := ZBT-WE826-16M IMAGE_SIZE := $(ralink_default_fw_size_16M) - DEVICE_TITLE := Zbtlink ZBT-WE826 + SUPPORTED_DEVICES += zbt-we826 + DEVICE_TITLE := Zbtlink ZBT-WE826 (16M) DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620 endef -TARGET_DEVICES += zbt-we826 +TARGET_DEVICES += zbt-we826-16M + +define Device/zbt-we826-32M + DTS := ZBT-WE826-32M + IMAGE_SIZE := $(ralink_default_fw_size_32M) + DEVICE_TITLE := Zbtlink ZBT-WE826 (32M) + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620 +endef +TARGET_DEVICES += zbt-we826-32M define Device/zbt-wr8305rt DTS := ZBT-WR8305RT