From: NeilBrown Date: Thu, 22 Dec 2011 23:17:51 +0000 (+1100) Subject: md: create externally visible flags for supporting hot-replace. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2d78f8c451785f030ac1676a18691896b59c69d8;p=openwrt%2Fstaging%2Fblogic.git md: create externally visible flags for supporting hot-replace. hot-replace is a feature being added to md which will allow a device to be replaced without removing it from the array first. With hot-replace a spare can be activated and recovery can start while the original device is still in place, thus allowing a transition from an unreliable device to a reliable device without leaving the array degraded during the transition. It can also be use when the original device is still reliable but it not wanted for some reason. This will eventually be supported in RAID4/5/6 and RAID10. This patch adds a super-block flag to distinguish the replacement device. If an old kernel sees this flag it will reject the device. It also adds two per-device flags which are viewable and settable via sysfs. "want_replacement" can be set to request that a device be replaced. "replacement" is set to show that this device is replacing another device. The "rd%d" links in /sys/block/mdXx/md only apply to the original device, not the replacement. We currently don't make links for the replacement - there doesn't seem to be a need. Signed-off-by: NeilBrown --- diff --git a/Documentation/md.txt b/Documentation/md.txt index fc94770f44ab..993fba37b7d1 100644 --- a/Documentation/md.txt +++ b/Documentation/md.txt @@ -357,14 +357,14 @@ Each directory contains: written to, that device. state - A file recording the current state of the device in the array + A file recording the current state of the device in the array which can be a comma separated list of faulty - device has been kicked from active use due to - a detected fault or it has unacknowledged bad - blocks + a detected fault, or it has unacknowledged bad + blocks in_sync - device is a fully in-sync member of the array writemostly - device will only be subject to read - requests if there are no other options. + requests if there are no other options. This applies only to raid1 arrays. blocked - device has failed, and the failure hasn't been acknowledged yet by the metadata handler. @@ -374,6 +374,13 @@ Each directory contains: This includes spares that are in the process of being recovered to write_error - device has ever seen a write error. + want_replacement - device is (mostly) working but probably + should be replaced, either due to errors or + due to user request. + replacement - device is a replacement for another active + device with same raid_disk. + + This list may grow in future. This can be written to. Writing "faulty" simulates a failure on the device. @@ -386,6 +393,13 @@ Each directory contains: Writing "in_sync" sets the in_sync flag. Writing "write_error" sets writeerrorseen flag. Writing "-write_error" clears writeerrorseen flag. + Writing "want_replacement" is allowed at any time except to a + replacement device or a spare. It sets the flag. + Writing "-want_replacement" is allowed at any time. It clears + the flag. + Writing "replacement" or "-replacement" is only allowed before + starting the array. It sets or clears the flag. + This file responds to select/poll. Any change to 'faulty' or 'blocked' causes an event. diff --git a/drivers/md/md.c b/drivers/md/md.c index 0e2288824938..be569eb41a93 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1714,6 +1714,8 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev) } if (sb->devflags & WriteMostly1) set_bit(WriteMostly, &rdev->flags); + if (le32_to_cpu(sb->feature_map) & MD_FEATURE_REPLACEMENT) + set_bit(Replacement, &rdev->flags); } else /* MULTIPATH are always insync */ set_bit(In_sync, &rdev->flags); @@ -1767,6 +1769,9 @@ static void super_1_sync(struct mddev *mddev, struct md_rdev *rdev) sb->recovery_offset = cpu_to_le64(rdev->recovery_offset); } + if (test_bit(Replacement, &rdev->flags)) + sb->feature_map |= + cpu_to_le32(MD_FEATURE_REPLACEMENT); if (mddev->reshape_position != MaxSector) { sb->feature_map |= cpu_to_le32(MD_FEATURE_RESHAPE_ACTIVE); @@ -2560,6 +2565,15 @@ state_show(struct md_rdev *rdev, char *page) len += sprintf(page+len, "%swrite_error", sep); sep = ","; } + if (test_bit(WantReplacement, &rdev->flags)) { + len += sprintf(page+len, "%swant_replacement", sep); + sep = ","; + } + if (test_bit(Replacement, &rdev->flags)) { + len += sprintf(page+len, "%sreplacement", sep); + sep = ","; + } + return len+sprintf(page+len, "\n"); } @@ -2628,6 +2642,42 @@ state_store(struct md_rdev *rdev, const char *buf, size_t len) } else if (cmd_match(buf, "-write_error")) { clear_bit(WriteErrorSeen, &rdev->flags); err = 0; + } else if (cmd_match(buf, "want_replacement")) { + /* Any non-spare device that is not a replacement can + * become want_replacement at any time, but we then need to + * check if recovery is needed. + */ + if (rdev->raid_disk >= 0 && + !test_bit(Replacement, &rdev->flags)) + set_bit(WantReplacement, &rdev->flags); + set_bit(MD_RECOVERY_NEEDED, &rdev->mddev->recovery); + md_wakeup_thread(rdev->mddev->thread); + err = 0; + } else if (cmd_match(buf, "-want_replacement")) { + /* Clearing 'want_replacement' is always allowed. + * Once replacements starts it is too late though. + */ + err = 0; + clear_bit(WantReplacement, &rdev->flags); + } else if (cmd_match(buf, "replacement")) { + /* Can only set a device as a replacement when array has not + * yet been started. Once running, replacement is automatic + * from spares, or by assigning 'slot'. + */ + if (rdev->mddev->pers) + err = -EBUSY; + else { + set_bit(Replacement, &rdev->flags); + err = 0; + } + } else if (cmd_match(buf, "-replacement")) { + /* Similarly, can only clear Replacement before start */ + if (rdev->mddev->pers) + err = -EBUSY; + else { + clear_bit(Replacement, &rdev->flags); + err = 0; + } } if (!err) sysfs_notify_dirent_safe(rdev->sysfs_state); @@ -6717,8 +6767,11 @@ static int md_seq_show(struct seq_file *seq, void *v) if (test_bit(Faulty, &rdev->flags)) { seq_printf(seq, "(F)"); continue; - } else if (rdev->raid_disk < 0) + } + if (rdev->raid_disk < 0) seq_printf(seq, "(S)"); /* spare */ + if (test_bit(Replacement, &rdev->flags)) + seq_printf(seq, "(R)"); sectors += rdev->sectors; } diff --git a/drivers/md/md.h b/drivers/md/md.h index 670c10e6b484..44c63dfeeb2b 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -72,34 +72,7 @@ struct md_rdev { * This reduces the burden of testing multiple flags in many cases */ - unsigned long flags; -#define Faulty 1 /* device is known to have a fault */ -#define In_sync 2 /* device is in_sync with rest of array */ -#define WriteMostly 4 /* Avoid reading if at all possible */ -#define AutoDetected 7 /* added by auto-detect */ -#define Blocked 8 /* An error occurred but has not yet - * been acknowledged by the metadata - * handler, so don't allow writes - * until it is cleared */ -#define WriteErrorSeen 9 /* A write error has been seen on this - * device - */ -#define FaultRecorded 10 /* Intermediate state for clearing - * Blocked. The Fault is/will-be - * recorded in the metadata, but that - * metadata hasn't been stored safely - * on disk yet. - */ -#define BlockedBadBlocks 11 /* A writer is blocked because they - * found an unacknowledged bad-block. - * This can safely be cleared at any - * time, and the writer will re-check. - * It may be set at any time, and at - * worst the writer will timeout and - * re-check. So setting it as - * accurately as possible is good, but - * not absolutely critical. - */ + unsigned long flags; /* bit set of 'enum flag_bits' bits. */ wait_queue_head_t blocked_wait; int desc_nr; /* descriptor index in the superblock */ @@ -152,6 +125,44 @@ struct md_rdev { sector_t size; /* in sectors */ } badblocks; }; +enum flag_bits { + Faulty, /* device is known to have a fault */ + In_sync, /* device is in_sync with rest of array */ + WriteMostly, /* Avoid reading if at all possible */ + AutoDetected, /* added by auto-detect */ + Blocked, /* An error occurred but has not yet + * been acknowledged by the metadata + * handler, so don't allow writes + * until it is cleared */ + WriteErrorSeen, /* A write error has been seen on this + * device + */ + FaultRecorded, /* Intermediate state for clearing + * Blocked. The Fault is/will-be + * recorded in the metadata, but that + * metadata hasn't been stored safely + * on disk yet. + */ + BlockedBadBlocks, /* A writer is blocked because they + * found an unacknowledged bad-block. + * This can safely be cleared at any + * time, and the writer will re-check. + * It may be set at any time, and at + * worst the writer will timeout and + * re-check. So setting it as + * accurately as possible is good, but + * not absolutely critical. + */ + WantReplacement, /* This device is a candidate to be + * hot-replaced, either because it has + * reported some faults, or because + * of explicit request. + */ + Replacement, /* This device is a replacement for + * a want_replacement device with same + * raid_disk number. + */ +}; #define BB_LEN_MASK (0x00000000000001FFULL) #define BB_OFFSET_MASK (0x7FFFFFFFFFFFFE00ULL) @@ -482,15 +493,20 @@ static inline char * mdname (struct mddev * mddev) static inline int sysfs_link_rdev(struct mddev *mddev, struct md_rdev *rdev) { char nm[20]; - sprintf(nm, "rd%d", rdev->raid_disk); - return sysfs_create_link(&mddev->kobj, &rdev->kobj, nm); + if (!test_bit(Replacement, &rdev->flags)) { + sprintf(nm, "rd%d", rdev->raid_disk); + return sysfs_create_link(&mddev->kobj, &rdev->kobj, nm); + } else + return 0; } static inline void sysfs_unlink_rdev(struct mddev *mddev, struct md_rdev *rdev) { char nm[20]; - sprintf(nm, "rd%d", rdev->raid_disk); - sysfs_remove_link(&mddev->kobj, nm); + if (!test_bit(Replacement, &rdev->flags)) { + sprintf(nm, "rd%d", rdev->raid_disk); + sysfs_remove_link(&mddev->kobj, nm); + } } /* diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h index 9e65d9e20662..6f6df86f1ae5 100644 --- a/include/linux/raid/md_p.h +++ b/include/linux/raid/md_p.h @@ -277,7 +277,10 @@ struct mdp_superblock_1 { */ #define MD_FEATURE_RESHAPE_ACTIVE 4 #define MD_FEATURE_BAD_BLOCKS 8 /* badblock list is not empty */ - -#define MD_FEATURE_ALL (1|2|4|8) +#define MD_FEATURE_REPLACEMENT 16 /* This device is replacing an + * active device with same 'role'. + * 'recovery_offset' is also set. + */ +#define MD_FEATURE_ALL (1|2|4|8|16) #endif