From: John Crispin <john@openwrt.org>
Date: Thu, 29 Oct 2009 21:26:36 +0000 (+0000)
Subject: make etehrent work on wrt350n, thx sn9
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2d57b56bced3d7c9cd0781b9d9d5a6ac7b0abf2b;p=openwrt%2Fstaging%2Fwigyori.git

make etehrent work on wrt350n, thx sn9

SVN-Revision: 18214
---

diff --git a/package/switch/src/switch-robo.c b/package/switch/src/switch-robo.c
index 206359d07b..481bb76a5b 100644
--- a/package/switch/src/switch-robo.c
+++ b/package/switch/src/switch-robo.c
@@ -58,6 +58,7 @@
 #define  ROBO_DEVICE_ID_5395	0x95
 #define  ROBO_DEVICE_ID_5397	0x97
 #define  ROBO_DEVICE_ID_5398	0x98
+#define  ROBO_DEVICE_ID_53115	0x3115
 
 /* Private et.o ioctls */
 #define SIOCGETCPHYRD           (SIOCDEVPRIVATE + 9)
@@ -297,6 +298,7 @@ static void robo_switch_reset(void)
 	    (robo.devid == ROBO_DEVICE_ID_5398)) {
 		/* Trigger a software reset. */
 		robo_write16(ROBO_CTRL_PAGE, 0x79, 0x83);
+		mdelay(500);
 		robo_write16(ROBO_CTRL_PAGE, 0x79, 0);
 	}
 }
@@ -367,7 +369,8 @@ static int robo_probe(char *devname)
 	if (err)
 		return err;
 
-	printk("found!\n");
+	printk("found a 5%s%x!%s\n", robo.devid & 0xff00 ? "" : "3", robo.devid,
+		robo.is_5350 ? " It's a 5350." : "");
 	return 0;
 }
 
@@ -445,6 +448,17 @@ static int handle_vlan_port_write(void *driver, char *buf, int nr)
 	}
 
 	/* write config now */
+
+	if (robo.devid != ROBO_DEVICE_ID_5325) {
+		__u8 regoff = ((robo.devid == ROBO_DEVICE_ID_5395) ||
+			(robo.devid == ROBO_DEVICE_ID_53115)) ? 0x20 : 0;
+
+		robo_write32(ROBO_ARLIO_PAGE, 0x63 + regoff, (c->untag << 9) | c->port);
+		robo_write16(ROBO_ARLIO_PAGE, 0x61 + regoff, nr);
+		robo_write16(ROBO_ARLIO_PAGE, 0x60 + regoff, 1 << 7);
+		return 0;
+	}
+
 	val16 = (nr) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
 	if (robo.is_5350) {
 		robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350,
@@ -486,7 +500,12 @@ static int handle_enable_vlan_write(void *driver, char *buf, int nr)
 	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0, disable ? 0 :
 		(1 << 7) /* 802.1Q VLAN */ | (3 << 5) /* mac check and hash */);
 	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1, disable ? 0 :
-		(1 << 1) | (1 << 2) | (1 << 3) /* RSV multicast */);
+		(robo.devid == ROBO_DEVICE_ID_5325 ? (1 << 1) : 0) | /* RSV multicast */
+		robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0) | (1 << 2) | (1 << 3));
+
+	if (robo.devid != ROBO_DEVICE_ID_5325)
+		return 0;
+
 	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL4, disable ? 0 :
 		(1 << 6) /* drop invalid VID frames */);
 	robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL5, disable ? 0 :
@@ -585,6 +604,10 @@ static int __init robo_init(void)
 			.port_handlers		= NULL,
 			.vlan_handlers		= vlan,
 		};
+		if (robo.devid != ROBO_DEVICE_ID_5325) {
+			driver.ports = 9;
+			driver.cpuport = 8;
+		}
 
 		return switch_register_driver(&driver);
 	}
diff --git a/target/linux/brcm-2.4/base-files/etc/preinit.arch b/target/linux/brcm-2.4/base-files/etc/preinit.arch
index 25d11d96ab..a90d314e25 100755
--- a/target/linux/brcm-2.4/base-files/etc/preinit.arch
+++ b/target/linux/brcm-2.4/base-files/etc/preinit.arch
@@ -37,8 +37,6 @@ case "$(cat /proc/diag/model)" in
 	"Sitecom WL-105b") ifname=eth1;;
 esac
 
-failsafe_ip
-
 check_module () {
   module="$1"; shift; params="$*"
 
@@ -48,11 +46,14 @@ check_module () {
   return $?
 }
 
+check_module tg3
 insmod switch-core
 check_module switch-robo || check_module switch-adm  || { 
   check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
 } || rmmod switch-core
 
+failsafe_ip
+
 [ -d /proc/switch/eth0 ] && {
 	echo 1 > /proc/switch/eth0/reset