From: Felix Fietkau Date: Thu, 9 Jun 2016 14:51:39 +0000 (+0200) Subject: lantiq: add Buffalo WBMR-300HPD support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2d48f93ff4537628f6860cf6f562b7282384b035;p=openwrt%2Fstaging%2Fblocktrron.git lantiq: add Buffalo WBMR-300HPD support Signed-off-by: Felix Fietkau --- diff --git a/target/linux/lantiq/base-files/etc/board.d/01_leds b/target/linux/lantiq/base-files/etc/board.d/01_leds index 39b693ac19..c365468030 100755 --- a/target/linux/lantiq/base-files/etc/board.d/01_leds +++ b/target/linux/lantiq/base-files/etc/board.d/01_leds @@ -42,6 +42,13 @@ P2812HNUF*) ARV7519RW22) ucidef_set_led_netdev "lan" "lan" "arv7519rw22:green:lan" "eth0.1" ;; +WBMR300) + ucidef_set_led_switch "lan1" "LAN1" "wbmr300:green:lan1" "switch0" "0x08" + ucidef_set_led_switch "lan2" "LAN2" "wbmr300:green:lan2" "switch0" "0x04" + ucidef_set_led_switch "wan" "WAN" "wbmr300:green:wan" "switch0" "0x10" + ucidef_set_led_switch "lan3" "LAN3" "wbmr300:green:lan3" "switch0" "0x20" + ucidef_set_led_default "router" "router" "wbmr300:green:router" "1" + ;; *) ;; esac diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network index a3dc80c54b..89ffc79b0f 100755 --- a/target/linux/lantiq/base-files/etc/board.d/02_network +++ b/target/linux/lantiq/base-files/etc/board.d/02_network @@ -146,6 +146,13 @@ VGV7510KW22) "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6t@eth0" ;; +WBMR300) + lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr) + wan_mac="$lan_mac" + ucidef_add_switch "switch0" \ + "2:lan:1" "3:lan:2" "5:lan:3" "4:wan:1" "6t@eth0" + ;; + esac if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then diff --git a/target/linux/lantiq/dts/WBMR300.dts b/target/linux/lantiq/dts/WBMR300.dts new file mode 100644 index 0000000000..824efb7cc0 --- /dev/null +++ b/target/linux/lantiq/dts/WBMR300.dts @@ -0,0 +1,303 @@ +/dts-v1/; + +/include/ "vr9.dtsi" + +/ { + model = "WBMR300 - Buffalo WBMR-300HPD"; + + chosen { + bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + + leds { + boot = &power_g; + failsafe = &diag_r; + running = &power_g; + + dsl = &dsl; + internet = &router_g; + wifi = &wifi_g; + }; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + phy-rst { + lantiq,pins = "io42"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + pins_spi_default: pins_spi_default { + spi_in { + lantiq,groups = "spi_di"; + lantiq,function = "spi"; + }; + spi_out { + lantiq,groups = "spi_do", "spi_clk", + "spi_cs4"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 33 0>; + lantiq,portmask = <0x3>; + }; + + ifxhcd@E106000 { + status = "okay"; + gpios = <&gpio 33 0>; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware = "lantiq/vr9_phy22f_a2x.bin"; + phys = [ 00 01 ]; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 6 1>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + power { + label = "power"; + gpios = <&gpio 5 1>; + linux,code = <0x74>; + }; + + reset { + label = "reset"; + gpios = <&gpio 7 1>; + linux,code = <0x198>; + }; + + wps { + label = "wps"; + gpios = <&gpio 31 1>; + linux,code = <0x211>; + }; + + auto { + label = "auto"; + gpios = <&gpio 48 0>; + linux,code = <0x100>; + linux,input-type = <5>; /* EV_SW */ + }; + + router { + label = "router"; + gpios = <&gpio 2 0>; + linux,code = <0x100>; + linux,input-type = <5>; /* EV_SW */ + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + diag_r: diag_r { + label = "wbmr300:red:diag"; + gpios = <&gpio 0 0>; + default_state = "off"; + }; + + wifi_g: wifi_g { + label = "wbmr300:green:wifi"; + gpios = <&gpio 1 0>; + }; + + dsl: dsl { + label = "dsl"; + gpios = <&gpio 4 0>; + }; + + router_y: router_y { + label = "wbmr300:yellow:router"; + gpios = <&gpio 8 0>; + }; + + wifi_y: wifi_y { + label = "wbmr300:yellow:wifi"; + gpios = <&gpio 9 0>; + }; + + lan1: lan1 { + label = "wbmr300:green:lan1"; + gpios = <&gpio 11 0>; + }; + + wan: wan { + label = "wbmr300:green:wan"; + gpios = <&gpio 12 0>; + }; + + lan3: lan3 { + label = "wbmr300:green:lan3"; + gpios = <&gpio 15 0>; + }; + + lan2: lan2 { + label = "wbmr300:green:lan2"; + gpios = <&gpio 33 0>; + }; + + internet_g: internet_g { + label = "wbmr300:green:internet"; + gpios = <&gpio 34 0>; + }; + + internet_y: internet_y { + label = "wbmr300:yellow:internet"; + gpios = <&gpio 35 0>; + }; + + router_g: router_g { + label = "wbmr300:green:router"; + gpios = <&gpio 36 0>; + }; + + power_g: power_g { + label = "wbmr300:green:power"; + gpios = <&gpio 49 0>; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&pins_spi_default>; + + status = "ok"; + m25p80@4 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <4 0>; + spi-max-frequency = <20000000>; + + partition@0 { + reg = <0x0 0x10000>; + label = "u-boot"; + read-only; + }; + + partition@10000 { + reg = <0x10000 0x10000>; + label = "gphyfirmware"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x80000>; + label = "dsl_fw"; + }; + + partition@de0000 { + reg = <0xa0000 0xf40000>; + label = "firmware"; + }; + + partition@fe0000 { + reg = <0xfe0000 0x10000>; + label = "sysconfig"; + read-only; + }; + + partition@ff0000 { + reg = <0xff0000 0x2000>; + label = "ubootconfig"; + }; + + partition@ff3000 { + reg = <0xff3000 0x2000>; + label = "board_config"; + read-only; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + lantiq,switch; + + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "mii"; + phy-handle = <&phy14>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "mii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <3>; + phy-mode = "mii"; + phy-handle = <&phy12>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy12: ethernet-phy@12 { + reg = <0x12>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy14: ethernet-phy@14 { + reg = <0x14>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile index b1a6a80cb9..16c0820f11 100644 --- a/target/linux/lantiq/image/Makefile +++ b/target/linux/lantiq/image/Makefile @@ -647,6 +647,14 @@ Image/Build/Profile/VG3503J=$(call Image/BuildLoader/$(1),$(1),VG3503J) include tp-link.mk +define Device/WBMR300 + DEVICE_PROFILE := WBMR300 + IMAGE_SIZE := 15616k + DEVICE_TITLE := Buffalo WBMR-300HPD + DEVICE_PACKAGES := kmod-mt76 wpad-mini kmod-usb-dwc2 +endef +TARGET_DEVICES += WBMR300 + define Device/VGV7510KW22NOR DEVICE_PROFILE := VGV7510KW22NOR IMAGE_SIZE := 15232k diff --git a/target/linux/lantiq/xrx200/config-default b/target/linux/lantiq/xrx200/config-default index c40ecfe8e8..42e846ede0 100644 --- a/target/linux/lantiq/xrx200/config-default +++ b/target/linux/lantiq/xrx200/config-default @@ -27,6 +27,9 @@ CONFIG_MTD_UBI_BLOCK=y CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_NLS=y CONFIG_PCIE_LANTIQ=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_SUPPLY=y CONFIG_RTL8306_PHY=y CONFIG_RTL8366S_PHY=y CONFIG_RTL8367B_PHY=y