From: Sander Vanheule Date: Sat, 18 Jun 2022 07:04:54 +0000 (+0200) Subject: ath79: TP-Link EAP245 v3: use pre-calibration nvmem-cell X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2d3321619b2b;p=openwrt%2Fstaging%2Fnbd.git ath79: TP-Link EAP245 v3: use pre-calibration nvmem-cell ath10k Wave-2 hardware requires an nvmem-cell called "pre-calibration" to load the device specific caldata, not "calibration". Update the nvmem-cell name to make the 5GHz radio work again. Fixes: d4b3b2394233 ("ath79: TP-Link EAP245 v3: convert radios to nvmem-cells") Signed-off-by: Sander Vanheule --- diff --git a/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts b/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts index 6819d2d822..ab5bc7b1a9 100644 --- a/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts +++ b/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts @@ -54,7 +54,7 @@ mac-address-increment = <1>; nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>; - nvmem-cell-names = "mac-address", "calibration"; + nvmem-cell-names = "mac-address", "pre-calibration"; }; };