From: Álvaro Fernández Rojas Date: Fri, 10 May 2024 16:49:13 +0000 (+0200) Subject: bcm27xx: enable 6.6 testing kernel X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2cd6da257c4a9d0cfdf891fec96ff89240872986;p=openwrt%2Fstaging%2Fthess.git bcm27xx: enable 6.6 testing kernel The bcm27xx now supports 6.6 kernel as testing. Signed-off-by: Álvaro Fernández Rojas --- diff --git a/target/linux/bcm27xx/Makefile b/target/linux/bcm27xx/Makefile index d7b56b23bc..d0a05f6193 100644 --- a/target/linux/bcm27xx/Makefile +++ b/target/linux/bcm27xx/Makefile @@ -12,6 +12,7 @@ FEATURES:=audio boot-part display ext4 fpu gpio rootfs-part rtc squashfs usb usb SUBTARGETS:=bcm2708 bcm2709 bcm2710 bcm2711 bcm2712 KERNEL_PATCHVER:=6.1 +KERNEL_TESTING_PATCHVER:=6.6 define Target/Description Build firmware image for Broadcom BCM27xx SoC devices. diff --git a/target/linux/bcm27xx/image/Makefile b/target/linux/bcm27xx/image/Makefile index 9d41e47bac..deff607070 100644 --- a/target/linux/bcm27xx/image/Makefile +++ b/target/linux/bcm27xx/image/Makefile @@ -72,10 +72,17 @@ endef define Device/rpi DEVICE_MODEL := B/B+/CM/Zero/ZeroW +ifdef CONFIG_LINUX_6_6 + DEVICE_DTS := \ + broadcom/bcm2708-rpi-b broadcom/bcm2708-rpi-b-rev1 broadcom/bcm2708-rpi-b-plus \ + broadcom/bcm2708-rpi-cm \ + broadcom/bcm2708-rpi-zero broadcom/bcm2708-rpi-zero-w +else DEVICE_DTS := \ bcm2708-rpi-b bcm2708-rpi-b-rev1 bcm2708-rpi-b-plus \ bcm2708-rpi-cm \ bcm2708-rpi-zero bcm2708-rpi-zero-w +endif SUPPORTED_DEVICES := \ rpi-b rpi-b-plus rpi-cm rpi-zero rpi-zero-w \ raspberrypi,model-b raspberrypi,model-b-plus raspberrypi,model-b-rev2 \ @@ -99,12 +106,21 @@ define Device/rpi-2 DEVICE_ALT1_VENDOR := Raspberry Pi DEVICE_ALT1_MODEL := 4B/400/CM4 DEVICE_ALT1_VARIANT := (32bit) +ifdef CONFIG_LINUX_6_6 + DEVICE_DTS := \ + broadcom/bcm2709-rpi-2-b broadcom/bcm2710-rpi-2-b \ + broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus \ + broadcom/bcm2711-rpi-4-b broadcom/bcm2711-rpi-400 \ + broadcom/bcm2710-rpi-cm3 broadcom/bcm2711-rpi-cm4 \ + broadcom/bcm2710-rpi-zero-2 +else DEVICE_DTS := \ bcm2709-rpi-2-b bcm2710-rpi-2-b \ bcm2710-rpi-3-b bcm2710-rpi-3-b-plus \ bcm2711-rpi-4-b bcm2711-rpi-400 \ bcm2710-rpi-cm3 bcm2711-rpi-cm4 \ bcm2710-rpi-zero-2 +endif SUPPORTED_DEVICES := \ rpi-2-b rpi-3-b rpi-3-b-plus rpi-cm rpi-zero-2 \ raspberrypi,2-model-b raspberrypi,2-model-b-rev2 \