From: Ed Swarthout <ed.swarthout@freescale.com>
Date: Thu, 7 Dec 2006 16:34:14 +0000 (-0600)
Subject: Add support for 8641 Rev 2 silicon.
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2ccceacc04b009d923afb7c26189ba2f8a2a5d46;p=project%2Fbcm63xx%2Fu-boot.git

Add support for 8641 Rev 2 silicon.

Without this patch, I am unable to get to the prompt on rev 2 silicon.
Only set ddrioovcr for rev1.

Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
---

diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c
index b18e8225de..ac9ff81ce6 100644
--- a/cpu/mpc86xx/spd_sdram.c
+++ b/cpu/mpc86xx/spd_sdram.c
@@ -284,9 +284,9 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num,
 	}
 
 	/*
-	 * Adjust DDR II IO voltage biasing.  It just makes it work.
+	 * Adjust DDR II IO voltage biasing.  Rev1 only
 	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
+	if (((get_svr() & 0xf0) == 0x10) && (spd.mem_type == SPD_MEMTYPE_DDR2)) {
 		gur->ddrioovcr = (0
 				  | 0x80000000		/* Enable */
 				  | 0x10000000		/* VSEL to 1.8V */