From: AndrĂ© Valentin Date: Fri, 17 Jun 2022 19:35:03 +0000 (+0200) Subject: ramips: add support for ZyXEL LTE3301-Plus X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=2cc50592404a634fff32f2e07c2754508b89d9b1;p=openwrt%2Fstaging%2Fnbd.git ramips: add support for ZyXEL LTE3301-Plus The ZyXEL LTE3301-PLUS is an 4G indoor CPE with 2 external LTE antennas. Specifications: - SoC: MediaTek MT7621AT - RAM: 256 MB - Flash: 128 MB MB NAND (MX30LF1G18AC) - WiFi: MediaTek MT7615E - Switch: 4 LAN ports (Gigabit) - LTE: Quectel EG506 connected by USB3 to SoC - SIM: 1 micro-SIM slot - USB: USB3 port - Buttons: Reset, WPS - LEDs: Multicolour power, internet, LTE, signal, Wifi, USB - Power: 12V, 1.5A The device is built as an indoor ethernet to LTE bridge or router with Wifi. UART Serial: 57600N1 Located on populated 5 pin header J5: [o] GND [ ] key - no pin [o] RX [o] TX [o] 3.3V Vcc MAC assignment: lan: 98:0d:67:ee:85:54 (base, on the device back) wlan: 98:0d:67:ee:85:55 Installation from web GUI: - Log in as "admin" on http://192.168.1.1/ - Upload OpenWrt initramfs-recovery.bin image on the Maintenance -> Firmware page - Wait for OpenWrt to boot and ssh to root@192.168.1.1 - format ubi device: ubiformat /dev/mtd6 - attach ubi device: ubiattach -m6 - create rootfs volume: ubimkvol /dev/ubi0 -n0 -N rootfs -s 1MiB - rootfs_data volume: ubimkvol /dev/ubi0 -n1 -N rootfs_data -s 1MiB - run sysupgrade with sysupgrade image For more details about flashing see commit 2449a632084b ("ramips: mt7621: Add support for ZyXEL NR7101"). Please note that this commit is needed: firmware-utils: add marcant changes for ZyXEL NBG6716 and LTE3301-PLUS Signed-off-by: AndrĂ© Valentin --- diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index 9d19398b36..f7f4821cef 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -81,6 +81,9 @@ xiaomi,redmi-router-ac2100) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000" ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x4000" "0x20000" ;; +zyxel,lte3301-plus) + ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x80000" + ;; zyxel,nr7101) idx="$(find_mtd_index Config)" [ -n "$idx" ] && \ diff --git a/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts b/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts new file mode 100644 index 0000000000..ed8260534e --- /dev/null +++ b/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts @@ -0,0 +1,217 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "zyxel,lte3301-plus", "mediatek,mt7621-soc"; + model = "ZyXEL LTE3301-Plus"; + + aliases { + label-mac-device = &gmac0; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + power_modem { + gpio-export,name = "power_modem"; + gpio-export,output = <1>; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "lte3301-plus:white:power"; + gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + }; + + wifi { + label = "lte3301-plus:white:wifi"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + internet { + label = "lte3301-plus:white:internet"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "lte3301-plus:white:usb"; + gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + }; + + lte { + label = "lte3301-plus:white:lte"; + gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + }; + + mobile_green { + label = "lte3301-plus:green:mobile"; + gpios = <&gpio 31 GPIO_ACTIVE_LOW>; + }; + + mobile_orange { + label = "lte3301-plus:orange:mobile"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + + mobile_red { + label = "lte3301-plus:red:mobile"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + }; + +}; + +&gpio { + status = "okay"; + + enable_usb_power { + gpio-hog; + line-name = "enable USB power"; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x80000>; /* 64 KB */ + }; + partition@80000 { + label = "uboot_env"; + reg = <0x80000 0x80000>; /* 64 KB */ + }; + factory: partition@100000 { + label = "factory"; + reg = <0x100000 0x40000>; + }; + partition@140000 { + label = "Kernel"; + reg = <0x140000 0x1ec0000>; + }; + partition@2140000 { + label = "kernel2"; + reg = <0x2140000 0x1ec0000>; + }; + partition@4000000 { + label = "wwan"; + reg = <0x4000000 0x100000>; + }; + partition@4100000 { + label = "ubi"; + reg = <0x4100000 0x3ee0000>; + }; + }; +}; + +ðernet { + pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; +}; + +&state_default { + gpio { + groups = "i2c", "rgmii2", "uart3", "jtag", "wdt"; + function = "gpio"; + }; + +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_fe6e>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan4"; + }; + port@1 { + status = "okay"; + label = "lan3"; + }; + port@2 { + status = "okay"; + label = "lan2"; + }; + port@3 { + status = "okay"; + label = "lan1"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + status = "okay"; + mt7615d@0,0 { + /* In reality at hangs at pcie1, this is a driver bug */ + compatible = "pci14c3,7615"; + reg = <0x0000 0 0 0 0>; + mediatek,firmware-eeprom = "mt7615e_eeprom.bin"; + mediatek,mtd-eeprom = <&factory 0x0000>; + nvmem-cells = <&macaddr_factory_fe6e>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <(1)>; + }; + +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + mtd-mac-address = <&factory 0xfe6e>; + + macaddr_factory_fe6e: macaddr@fe6e { + reg = <0xfe6e 0x6>; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 7cda0c8f75..cc6dbe9418 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -2259,6 +2259,25 @@ define Device/zio_freezio endef TARGET_DEVICES += zio_freezio +define Device/zyxel_lte3301-plus + $(Device/dsa-migration) + BLOCKSIZE := 128k + PAGESIZE := 2048 + UBINIZE_OPTS := -E 5 + DEVICE_VENDOR := ZyXEL + DEVICE_MODEL := LTE3301-PLUS + DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \ + uboot-envtools kmod-usb-ledtrig-usbport kmod-usb-net-qmi-wwan \ + kmod-usb-serial-option uqmi + KERNEL := $(KERNEL_DTB) | uImage lzma | \ + zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION) + KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | \ + zytrx-header $$(DEVICE_MODEL) 9.99(ABQU.1)$$(VERSION_DIST)-recovery + KERNEL_INITRAMFS_SUFFIX := -recovery.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += zyxel_lte3301-plus + define Device/zyxel_nr7101 $(Device/dsa-migration) BLOCKSIZE := 128k diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 4b912283e1..9f62a29aa7 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -168,6 +168,9 @@ zbtlink,zbt-wg1608-16m) ucidef_set_led_netdev "lan4" "LAN4" "green:lan-4" "lan4" ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan" ;; +zyxel,lte3301-plus) + ucidef_set_led_netdev "internet" "internet" "white:internet" "wwan0" + ;; esac board_config_flush diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 88dc8c265e..7211422364 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -76,7 +76,8 @@ ramips_setup_interfaces() ucidef_set_interface_lan "lan1 lan2" ;; linksys,re6500|\ - netgear,wac104) + netgear,wac104|\ + zyxel,lte3301-plus) ucidef_set_interface_lan "lan1 lan2 lan3 lan4" ;; mikrotik,routerboard-750gr3) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches index ed728b07c4..4bf2aa37e0 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches @@ -22,6 +22,10 @@ ubnt,edgerouter-x-sfp) ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "403" ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "404" ;; +zyxel,lte3301-plus) + ucidef_add_gpio_switch "usb_power" "Power USB Port" "usb_power" "1" + ucidef_add_gpio_switch "lte_power" "Power LTE modem" "lte_power" "1" + ;; zyxel,nr7101) ucidef_add_gpio_switch "lte_reset" "Reset LTE/5G modem" "483" ;; diff --git a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount index 8382bdf0c5..4ebe50fdfe 100755 --- a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount +++ b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount @@ -20,6 +20,11 @@ boot() { samknows,whitebox-v8) fw_setenv bootcount 0 ;; + zyxel,lte3301-plus) + [ $(printf %d $(fw_printenv -n DebugFlag)) -gt 0 ] || fw_setenv DebugFlag 1 + [ $(printf %d $(fw_printenv -n Image1Stable)) -gt 0 ] || fw_setenv Image1Stable 1 + [ $(printf %d $(fw_printenv -n Image1Try)) -gt 0 ] && fw_setenv Image1Try 0 + ;; zyxel,nr7101) [ $(printf %d $(fw_printenv -n DebugFlag)) -gt 0 ] || fw_setenv DebugFlag 0x1 [ $(printf %d $(fw_printenv -n Image1Stable)) -gt 0 ] || fw_setenv Image1Stable 1 diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 9af46202ba..80490c377d 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -119,6 +119,7 @@ platform_do_upgrade() { ubnt,edgerouter-x-sfp) platform_upgrade_ubnt_erx "$1" ;; + zyxel,lte3301-plus|\ zyxel,nr7101) fw_setenv CheckBypass 0 fw_setenv Image1Stable 0